Completion confirmation - missing configuration ?
Hello experts,
Some confirmations have been done via IW41 for an operation (in an order).
When i display the order and go to "Act.Data" tab in General Operation Data, i can see the "confirmation number" for this operation :
- when i double-click on "confirmation number" , i do get access to the confirmation overview and can select a specific counter to be displayed.
- when i click on "Completion confirmation list" icon (located on the right of the "confirmation number") , i get to the next screen but an empty screen ! none confirmation is displayed ! Besides that , when i run IW47 (confirmation list) , system does not find any result for that order
Is there a specific configuration to be activated ?
Thanks for the help,
Regards,
P.
Hi Pete
I am not sure.. if this is helpful or u have already done this
As per your query.. i am able to get the list of confirmations done.
Can u tel us.. wat are the input fields u have selected to execute the list of confirmations
Ex : these are the entries i have given
1. I have selected the order status In process and Completed
2. I have given the order type
3. I have removed the default date, which it will displayed once u enter the Tcode : IW47
It shows me the list of confirmation...
After this u have the problem...
Revert me back....
- Pithan
Similar Messages
-
How to configure G/L accounts for maintenance order completion confirmation IW48.
Hi Gurus
When doing completion confirmation of a maintenance order material costs are being posted to Cost of goods sold account. How do I bypass the posting of material costs to this account because the same costs are being posted during settlement of order costs as well?
Regards
JosephHi Joseph,
I'm not sure that Completion Confirmation if Maintenance Orders (MO) will generate FI Posting.
Normally, Completion Confirmation will generate CO Document with Secondary Cost Element.
But, at Settlement process of Maintenance Order (MO), it's possible to generate FI Posting depends on Settlement Rule.
Please ensure about your inquiry.
Thanks
Adi -
Plant Maintenance - Maintenance Order Completion Confirmation
Dear Experts,
When i am confirming maint. order and checking final Confirmation Box then system confirm particular operation / order.
but when i check the clear open reservation then system will not set deletion indicator of reservation. I want to cancel reservation whenever clear open reservation check box will check.
Please guide me how i have do configuration for above mentioned requirement in Maintenance and Service Processing --> Completion Confirmations --> Define Control Parameters for Completion Confirmations.
Thanks in advance.
Best Regards,
Rajiv Sinha
Message was edited by:
RAJIV RANJANhi rajiv,
as far as my knowledge there is no setting for automatically deleting the reservation, what it does is, it will mark the material as final issue for this reservation ,any future material you are adding will be reserved under different no.
you have the followoing option
after confirming you can make the material as MOVEMENT NOT ALLOWED in the order
or
you can technically complete the order which will delete the material and goods movement will not be carried out.
i cant understand you process why you are adding the material, which you want to delete it during confirmation.
regards
thyagarajan -
Set Field Selection for Completion Confirmation
I want to change the indicator of one field from "ready to input" to "required"..But i couldnt understand exactly the hierarchy under "Set Field Selection for Completion Confirmation" tab in SPRO. there are 3 parts under that tab;
1-PM: Confirmation - initial screen
2-PM: Confirmation - list and detail
3-PM: Confirmation - parameter
and i also couldnt find the name of my field which is about "codes for causes"..
Thanks...Russ,
I don't think it could be accomplished through configuration or through Transaction variants.
I think the simplest way to accomplish this would be by using one of the below user exits according to your needs.
CONFPM02: Customer-specific entry checks 1
CONFPM03: Customer-specific check by operation selection
CONFPM04: Customer-specific entry checks 2
The other option would be to use the Implicit enhancement functionality(If you are in EC C6.0 or above) to modify the table control field attributes dynamically.
Regards
Narasimhan -
IW42 - Overall Completion Confirmation - Field Selection
I have what seems to be a common requirement, but as yet have not found a good solution to it in standard SAP!
Following the creation of a profile for transaction IW42 - Overall Completion Confirmation, which includes the screen areas for notification Items, Causes and Activities the user has a requirement to make the catalog codes mandatory. The usual configuration settings in OIZN (Set field selection for completion confirmation) do not apply to these screen areas.
I'd appreciate any suggestions as to the simplest method of achieving.
Many thanks.Russ,
I don't think it could be accomplished through configuration or through Transaction variants.
I think the simplest way to accomplish this would be by using one of the below user exits according to your needs.
CONFPM02: Customer-specific entry checks 1
CONFPM03: Customer-specific check by operation selection
CONFPM04: Customer-specific entry checks 2
The other option would be to use the Implicit enhancement functionality(If you are in EC C6.0 or above) to modify the table control field attributes dynamically.
Regards
Narasimhan -
PM order status remains as PCNF even after completion confirmation & TECO
Hi,
For some of the PM orders we created, the order status is till in PCNF and operation status in MCNF.
We have done the following also
1) Completion confirmation done for all operations
2) "Fincal confirmation" and "No remaining work" tabs checked for all operation confirmations
3) TECO is done
But still the operations are in mCNF-Manual confirmation status and hence the order is is in PCNF.
Please let me know how to change the order status from PCNF to CNF.Please check any Sub operation confirmation is pending or ? if so please do ( IW41 )
Riyaj
Edited by: riyajmaner on Feb 24, 2012 5:08 PM -
Goods Receipt after Completion Confirmation for Service Order
Hi,
We have a scenario in which a Notification is used to create a Sales Order & a Service Order using the action button.
The Sales Order has a old/used product as a line item which we will consume along with some other new parts(added in the components tab in Service Order) to make a remanufactured product which we will obtain after using IW42 for Completion Confirmation. (The Service order is to carry the cost of refabrication/refurburishment & additional parts as well)
We need to do Goods receipt of this remanufactured product to bring it into stock so that we can deliver the same using the same sales order.
Is this possible? We have tried using Refurbishment order both CS/PM but have not been successful in inwarding the remanufactured product using IW8W.
Kindly do suggest possibility of using a Service Order(created through a notification) with a GR feature for the above process of inwarding. Any alternate suggestions would also be very helpful.
If this functionality can be achieved with some enhancement(custom exit, BADI etc) & some amongst you have worked on something similar , please do share your valuable inputs
Thanks & Best Wishes
VishalHi
I dont think you will be able to do Goods receipt against prodcution order using inbound delivery VL31N. Inbound deliveries are normally created for Purchase orders and then GR can be posted wrt to the inbound delivery.
Prod order is normally within warehouse only so you can use MB31 and post GR directly against Prod order.
If you can explain more about your scenario hope we may help
Please let us know
thanks -
Completion Confirmation of PM orders before goods movement
Hi,
Is there any settings available to stop completion confirmation of PM orders before goods movement (release purchase requisitions, create purchase order, goods issuance and good receipt), if stock, non stock material and external service are assigned on order?
Regards,Hi ,
Not sure but look at BADI WORKORDER_CONFIRM : Business Add-In PM/PP/PS/PI Orders Operation: Confirm
regrds
pushpa -
I cannot complete my iphone configuration after sofware update, when i connect to itunes i keep gettin a try again later message
That's usually a sign that your phone was hacked/jailbroken, and iTunes has detected such, errored out, preventing your phone from activating. Since Apple does not support hacking/jailbreaking, that's what happens, by design.
We can't help you here, as Apple owns this forum. You'll have to go elsewhere. -
ATP-check - check completely confirmed planned orders
Hi everyone,
I just stumbled over sth. during checking the ATP-settings in my system.
In OVZ9, when double-clicking on any of the combinations of checking-group and checking-rule, in the lower part of the righthand-side, I got the option to include planned orders as well. Now, if I open up my options, I find 4 of them:
- empty: Do not check
- A: check firmed planned orders only
- B: check completely confirmed planned orders
- C: check all planned orders
So... can anybody tell me what's the story with completely confirmed planned orders? I know what it means to firm planned orders and I know how to do it, but what's the point with that?
Any help greatly appreciated!
Regards... BobbyHi,
There was a bug in the standard program.
SAP create a new SAP Note '1616590' for the above correction.
Thank You. -
Installation, error message, missing configuration
when i try running adobe Photoshop, it gives an error message saying "missing configuration" what should i do? help please
Inertia what version of Photoshop and Operating system are you using?
-
Missing configuration entry for data - index relationship
IN ST04 -> configuration -> Data Class
all data classes are in yellow I'm trying to activate them and getting the following error
"Missing configuration entry for data - index relationship"
This is the result of a system copy
Thanks
KkhaldounHi All,
Just an update, I was able to get around my problems by patching the 2004s media from sp6 to sp8, uninstalling my scs, and database and re-installing from the patched media. -
Hi All,
Please let me know , Can I complete confirmations of an order by entering actual times by using TCODE--- CAT3( Record Working Times).
Or I must enter actual times in TCODE --IW 42 only.
Thank you in Advance
suryahi
i think you have to transfer the recorded times using CAT9 which will create confirmation for the orders .no need to enter in iw41 or iw42
regards
thyagarajan -
Fatal Slapd Missing configuration file during ds5.2 install
I am still trying to install ds 5.2 on Solaris 8. idsktune reports no errors.
During install I get the following error message:
Your new directory server has been started.
Created new Directory Server
Start Slapd Starting Slapd server configuration.
Fatal Slapd Missing configuration file /exports/iplanet/setup/slapd/slapd.inf
Configuration of the Directory Server failed.
Error Directory Server configuration failure
although, the file /exports/iplanet/setup/slapd/slapd.inf is there!!!
any help? ThanksSame problem. I ended up going to 9. Let me know if you figure it out. I even put a support call in w/ no luck.
Solaris 8 s28_38shwp2 SPARC -
Overall completion confirmation
Hello Experts,
Overall completion confirmation - IW42 transaction, the Time confirmation window has the operation short text placed at the farthest right side and every time the operator has to scroll right to see the operation detail.
Is there a way to bring the operation to the front, I know you can drag and drop for once. However when you enter the transaction again it goes back to the same spot.
Same is the case with Order operation start and finish time in IW31/32 as well, Is there a way to bring this to the front as well?
Thanks in advance.Hi,
You can use table control to achieve this.
From IW42, Drag/drop the columns in the way you want them to appear.
Select 'table control' icon that is found in top-right corner of the table
Enter a Variant Name and select 'create'
Maintain new variant in drop-down box
Select 'administrator' option
Select 'Activate' then 'close'
-Paul
Maybe you are looking for
-
Lifelog is not registering as it should
The last days, lifelogs registrates my cyclings as driving and also my walking. This isn't correct.What could be reason of bad registration? Thank you for your comment.With kind regards, Ilse
-
How to transfer photos via Lightning to SD Card Camera Reader to iPad.
-
Hi , I need to upload data into OM infotype 1005. for this i am using the FM RH_insert_infty. the logic I am using is as follows. DATA: lt_relation TYPE TABLE OF p1001, ls_relation TYPE p1001. ... data determination from file ...
-
Adobe 9.3 Blocking data on forms
We have upgraded to version 9.3.2 and when importing data from sql database to adobe forms it is blocking the data. You can set it to always trust the form but a few days later on the same form it reverts back to blocking the data. Does anyone have
-
Transparency - 8bit w/ alpha vs. 32bit
Hi, we are designing a pretty graphics heavy site right now. It's a very rough, organic design, and uses transparency quite a bit (mostly solid color boxes letting the background texture show through a bit). So we know we'll have to do some serious o