Completion Fields for Service Order

Hello All,
I need to populate a Service Order (type SM01) with Original Estimate Completion Date/Time and Current Estimated Completion Date/Time.
In which fields do I save them in the Service Order?
Regards
KCG

Hello
Please activate the Enhancement Tab and Add those custom Fields in this Tab.
Use User exit IWO10018 Maintenance order: User fields on order header
Br
Rakesh

Similar Messages

  • Goods Receipt after Completion Confirmation for Service Order

    Hi,
    We have a scenario in which a Notification is used to create a Sales Order & a Service Order using the action button.
    The Sales Order has a old/used product as a line item which we will consume along with some other new parts(added in the components tab in Service Order) to make a remanufactured product which we will obtain after using IW42 for Completion Confirmation. (The Service order is to carry the cost of refabrication/refurburishment & additional parts as well)
    We need to do Goods receipt of this remanufactured product to bring it into stock so that we can deliver the same using the same sales order.
    Is this possible? We have tried using Refurbishment order both CS/PM but have not been successful in inwarding the remanufactured product using IW8W.
    Kindly do suggest possibility of using a Service Order(created through a notification) with a GR feature for the above process of inwarding. Any alternate suggestions would also be very helpful.
    If this functionality can be achieved with some enhancement(custom exit, BADI etc) & some amongst you have worked on something similar , please do share your valuable inputs
    Thanks & Best Wishes
    Vishal

    Hi
    I dont think you will be able to do Goods receipt against prodcution order using inbound delivery VL31N. Inbound deliveries are normally created for Purchase orders and then GR can be posted wrt to the inbound delivery.
    Prod order is normally within warehouse only so you can use MB31 and post GR directly against Prod order.
    If you can explain more about your scenario hope we may help
    Please let us know
    thanks

  • Additional fields for service order

    Hi all.
    how can I add new fields to the service order ?
    I now how to add fields to activity but I can not add fields to the service.

    hello Amit,
    Did you have a look to the Easy enhancement workbench (transaction eewb)?
    Regards,
    Frédéric

  • ACC_DOCUMENT03: Field for Service Order (AUFK-AUFNR) in E1BPACHL09

    Experts,
    Looking to map AUFK-AUFNR while document posting using ACC_DOCUMENT03...
    I am thinking it should be E1BPACHL09 -ORDERID
    Please advice.
    Thanks in advance.

    yes,  AUFK-AUFNR  = E1BPACHL09 -ORDERID is correct mapping..

  • Delivery completed indicator for Service purchase order item

    Want to check the PO item for services already delivery completed.
    Field EKPO-ELIKZ (delivery completed indicator) is for material line item, is there a equavalent field for Service line item?
    What field /how to to check for a service line item in Purchase order already delivery completed ?

    For material:
    Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
    For Services:
    As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
    DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
    So you can check the DCI for service same way as you do for material
    Hope it will help you
    Regards
    Vikrant

  • COPA derivation for Technician field of Service Order

    Hi All,
    I have created a character field WW001 for populating COPA documents from "Technician" field of "Service Order". I have checked and found that AFRU table is having Service Order No. (AUFNR) as well Technician (PERNR). But my problem is while creting AFRU "Table Lookup" using T-Code KEDR, the corresponding COPA character is not coming in the origin, hence I am unable to get the charcter value of said Technician field from Service Order to COPA document.
    Is there any other table availabe in the system for KEDR setup or shall I need to go with User Exit?
    Thanks in advance. 
    Rupali
    Edited by: Rupali Sinha on Mar 11, 2009 2:57 AM

    Hi Rupali,
    I am very much sure that when there is WW characteristics, you need to go with Table Lookup under KEDR. But, if the desired combination of source/ origin and targets are not available there, we need to go with user exit. Take a help of your ABAP Consultant for user exit.
    Thanks & Regards,
    Robin

  • How to add standard "reason" field as search criteria for service orders?

    Hi,
    I would like to add the criteria "reason" in search tool for service orders.
    Would it be standard or woudl it need development?
    Many thanks,
    Eli

    Hi Eli,
    Please go to the web ui configuration and search reason feild is available for the config view. If it is available please move from hidden to visible. If it is not available you can add using development or AET to add that feild in the view.
    Regards,
    karthik J

  • Delivery Completed Indicator for Services

    Hi Guys
    In PO's, in the delivery tab, the Delivery Completed Indicator appears only for Stock PO's. Is it possible to make the Delivery Completed Indicator appear for non stock PO's as well, I mean for services?
    Thanks

    Hi,
    It is not possible to setup Delivery Completed Indicator For Services Purchase orders or Non stock Items.
    Reg,
    Ashok
    Rewards welcome.

  • Pricing date for Service Order and Service Confirmation

    Hi,
    I cretated a Service Confirmation as followup for Service Order.
    Client is asking "Pricing Date" should be same Same in Service Order and Service Confirmation. But, I am not seeing any such field in the screen.
    I need to check T&C field and Zone field. But, I am not seeing these fields also.
    Can you please let me know, where can I find this fields. (In which assignment block).
    Thanks,
    Sandeep
    Edited by: Sandeep Reddy on May 31, 2010 7:21 PM

    Hi,
    I think by PRICING DATE they mean BILLING DATE.
    In date profile of SERVICE ORDER and SERVICE CONFIRMATION you assign the BILLING DATE date type (i think it is there in the standard itself- however just ensure it).
    Or customize a PRINCING DATE date type in the DATE PROFILE of SERVICE ORDER and CONFIRMATION and copy the date set in SERVICE ORDER to SERVICE CONFIRMATION.
    This is one strategy you can use.
    Regards
    Surendra More

  • Default settlement rule with settlement type as FUL for service orders

    Hi Folks,
    Could you please advise me on the below issue?
    Requirement: setting up of default settlement rule with default settlement receiver as u201CCOST CENTREu201D and settlement type as u201CFULu201D for the maintenance orders (Order category u2013 30).
    I was trying to configure the same in transaction KSR3_ORI to assign the strategy to the service order type by clicking u201CNew Entriesu201D system not showing the drop list for the status column which is a mandatory field.
    We have applied the below notes:
    Note 313454 - Info: Default value for settlement type
    Note 851975 - Settlement use automatic generation creates
    Could you please guide us to get the default settlement rule for service orders along with settlement type as u201CFULu201D

    I was also with this problem in 2013 january and only found some information about this, here.
    Our solution was change the Maximum number of distribution rules in Maintain Settlement Profiles to 1, because we wanted the FUL rule and it is always in the first line.
    Now, for curiosity, I was search for another solution and found the SAP note 2028108 that explain that is not possible to change the strategy for PM/CS orders.
    This note was released at 09.06.2014

  • Proceeding document for service order

    In the case of recall/upgrade for service industry, product service letter can be created as a proceeding document for service order. I used to 0CRM_SRV_PROCESS_H for the service order. The BI content ODS for service order header is 0CRM_PROH. It contains an infoObject for proceeding document 0CRM_PREDOC. But it is not mapped in the transformation.
    I have 2 questions:
    1. which source field should 0CRM_PREDOC be mapped to?
    2. is it possible to include produce service letter in regular service order? The object type for produce service letter is BUS2000210. I noticed only BUS2000116 (service order) is being extracted via 0CRM_SRV_PROCESS_H.
    Thanks,
    Jennifer

    Madhu,
    I am sure you can create a follow-up transaction from a Service ticket to Service Order, All you have to make sure is the setting in IMG for Follow-up are active and right.
    Thanks

  • Settlement Rule for service order created based on sales order

    Hello,
    I am creating a sales order and entering  WBS as an cost object.
    After creation of sales order the Service order is created.
    For service order type in the settlement profile  WBS is maintained.
    But the system is not copying the WBS in Service order which is maintained in sales order.
    Can any body have an idea on this?
    Regards
    Abhijit

    Hi,
    As far as my understanding when service order is created through sales order then settlement rule is SDI and its item number
    Not what you maintained in account assignment tab of sales order
    When you settle service order then cost will settle on sales document and its item and then latter you settle sales order then settlement receiver is WBS element which you maintained in account assignment tab
    Kapil

  • BAPI for Service order creation

    Hi ,
    Please tell me if any Bapi for service order creation  , T-code : IW31
    regards,
    Prakash

    Hi Prakash,
    Have a look on the following BAPIs:
    BAPI_ISUSMORDER_CREATEMULTIPLE - Create Service Orders
    BAPI_ALM_CONF_CREATE - Create confirmation for maintenance/service order
    WTY04_CREATE_SERVICE_ORDER - Create Service order via function module.
    Hope this will help.
    Regards,
    Nitin.

  • FM for Service Order

    hi,
    require a FM for Service order Details IW73.
    cheers,
    Aditya.

    Did you try BAPI_ALM_ORDER_GET_DETAIL?
    Regards,
    Ravi
    Note : Please mark all the helpful answers

  • Plan Assessment and Allocation for Service Orders (CS)

    Hello,
    I'm trying to run plan assessment (KSUB) and plan allocation (KO9E) for a service order (created via IW31), but I'm not able to do it.
    I can do assessments (KSU5) and allocations (KO8G) with real values, but since I'm not able to do it in plan mode, I can't have comparative values between real and planned values (no value is flowing to allocation secondary cost elements).
    Can anyone let me know if this is some sort of limitation for Service Orders? Because I checked SPRO in transaction code KOAI and for this type of orders there is no Indicator for Integrated Planning, nor it's possible to assign a planning profile.
    Many thanks for any help you can provide!
    Regards,
    Cátia

    I created a SAP message and they confirmed that this is not possible.

Maybe you are looking for

  • Does R3 have a report or function module to process payments requests?

    HI All, I want R3 report or function module which will receive payment requests from vendor or customer and then procees it depending on the data. Does R3 have such a report or function module to process payments requests? Please help me. Thanks.

  • How to fixed no.of characters on oracle reports

    hi 2 all Anybody know that how to fixed no. of character display on oracle reports.This can also be done through substr function but if any another option is available in oracle report builder so plz inform me. Thanks Zulqarnain

  • I POD not connecting

    I picked up my i pod today and was put my usb wire into my i pod only to find it wouldn't fit. I look inside the small rectangle shape where u plug your usb cable in and i saw a small kellogs flake in it. I managed to get it out but i did some damage

  • New iMac 27-inch: 3.4GHz Periferal questions

    I am considering this new iMac, 27-inch: 3.4GHz. I have a late 2009 mac pro 8 core 2.26GHz with 6GB of Ram and is loaded with SATA hard drives. I have a lot of video on the HDs and want to see if 1. is an inexpensive way or a JOB array so I can acces

  • Query (select + insert with case)

    Hi All, I have a table like as shown below: [code] SQL> select * from v$version; BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production PL/SQL Release 11.2.0.1.0 - Production CORE    11.2.0.1.0      Production TNS for 32-bit Wi