Completion not recorded in LMS when using IE 11

Has anyone else had problems with course completion not recording in the LMS when using IE 11?

Yes, we are experiencing the same issue. It appears that the course is trying to re-initialize upon termination...
We may have to force using Compatibility mode which can be driven from a meta tag in the index page header...
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE11" />
Anyone tried this?

Similar Messages

SCORM-Based Presenter content does not track in LMS when using IE9 or above

MS has changed IE browser behavior to restrict SCORM communication between course content and an LMS when content is launched using IE 9, 10, or 11. This is not specific to a particular LMS. The problem occurs with Presenter 7 and 8 content. It occurs with Articluate content. It's about a security fix that was implemented with "unintended consequences". The work around has been to force users with IE9 or 10 to run in compatiblilty mode. This may work in a corporate setting with a small # of users but a long term solution needs to found. Articulate has developed a patch for new content and an "updater" that wil fix existing content.
I do not see any mention of this problem on the Presenter site. What is Adobe doing to fix this? There has to be a way to update existing content automatically as we can not afford to republish all our content.
I need help with this issue.

Hi Bernhard,
nice to hear that we resolve the problem
> Karstens answer solved my base problem,
> Detlevs answer lead into the right direction.
Not that I've that need for points...
It's just the question why my answer (if you follow the link, my answer was: delete two lines, from which one is essential to be deleted) only "lead into the right direction"... In fact, it solved the base problem, I would claim for me
To give the technical background: If your write
<property name="ComponentType" value="jspnative"/>
the portal runtime expects a component consisting of a native JSP; the second directive -
<property name="JSP" value="pagelet/InitialPage.jsp"/>
- for this case tells where to find this JSP. So if you delete the first line, <i>at least</i> the second line has no sense anymore. To clean up such a portalapp.xml, it just makes sense also to delete the second line.
Best regards
Detlev

My Webcam is not recording correctly. When recording directly to youtube, the audio sounds like a robot. It was not doing that when I first got my new MacBook Air last month. What do I do to fix it?

My built-in Webcam is not recording correctly. When recording directly to youtube (upload), the audio sounds like a robot. It was not doing that when I first got my new MacBook Air last month. What do I do to fix it?
I have tested it over several days with different internet connections...and have done it with another notebook computer on the same connection and it the video uploaded and recorded fine. I can also use the video webcam with Google Hangouts and it records and works fine. So I know the problem is not internet connection...and apparantly not even the webcam or mic.

Try using Settings > General > Reset > Reset All Settings.

HT2188 I can hear caller but they can not hear me except when using speaker phone

I can hear caller but they can not hear me except when using speaker phone

First of all, make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
One other problem could be your microphone. Does it work for anything else other than a call?
Good-Luck!
kpower28
Please mark this as "solved my problem" or "helped me"!

Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

Will a iphone purchased in Singapore be covered under complete hardaware and software support when used in India

Will a iphone purchased in Singapore be covered under complete hardware and software support when used in INDIA

See Here > http://www.apple.com/legal/warranty/

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Issue with complete refresh on materialized view when using rownum

Hi all,
I had an issue with rownum when using complete refresh
I am using rownum when creating materialized view and it is generation correctly.But the issue was when i am refreshing the same ,rownum was not getting sorted in ascending order.
anyone had come across this scenario

rownum is determined as the row is output, so "order by rownum" does literally nothing.
http://docs.oracle.com/cd/B19306_01/server.102/b14200/pseudocolumns009.htm

Limit record and replay when use flash build 4 premium.

I am trying flex automation in our company via iTest. the product is developed and built by flash builder 4 premium(not the trial version).
There is a prompt like ""License not present. With the trial verison only limited replays/record are allowed" when I record/replay the tests.
Perhttp://forums.adobe.com/message/251183#251183, it is caused by the trial version of Flash builder. But actually we do use the flash build4 premium to compile the application.
Anyone got this problem? Can you provide some input this? thanks a lot.

Deeptika,
One more thing need your confirmation. If I got following picture in Deactivation page, it means the FB4 premium is with license, right?
I clicked suspend activation in my PC and it showed suspending activation is successful. But when I re-start Flash builder, I still get following page. I am wondering if this flash builder is still with licensing.
thanks,
Lucas

IPhone not recognized in iTunes when using WiFi sync

I have found that my iPhone is frequently not recognized when using WiFi sync. The only way to sync my phone when that happens is to use the old fashioned way--connect it to my computer via USB. Then the phone is recognized and syncs fine. The device shows even when I take my iPhone off power. But when I close iPhone and later reopen it and plug in my iPhone to power, often it is not recognized. I've tried everything I can think of but nothing works.
Any ideas?
talbryn

I am having the same problem. It was working just fine and then just mysteriously stopped showing up in iTunes (my iPad still shows up & syncs via wifi just fine--it is just my iPhone). Someone please reply soon, this is driving me nuts! Thanks in advance!!

Not recording from USB keyboard using sound module

I have a USB keyboard and Poizone sound module but nothing gets recorded into AA3 when I record to a track. Track is armed to record, soundcard is selected (analog in) but nothing. What am I overlooking? Thanks.

To record the output of another application in Audition, you'll need to configure your default Windows recording port to be "What You Hear" or something similar, if that is an available option. Right click the speaker icon in your Windows system tray, and choose to adjust the Recording Properties. Here, depending on your OS, you are given a list of different input ports on your audio device: Microphone, Line Input, CD, and often, What You Hear. This just routes the output port back as an input so other programs can record this stream.
Not all audio devices offer this, so it may not show up. In that case, you'd probably need to route your output to a mixer, send a feed back to the Line Input port on your audio device, and listen via headphones through the mixer. Note that you'll need to disable software-based monitoring to prevent feedback and that you'll definitely want to turn off system sounds in case someone sends you an e-mail or an IM while you're recording.

JDev 9.0.3.3 Data not saved to DB when using Non-Transaction DataSource

Hi,
Env: JDev 9.0.3.3/WL 6.0 sp1/Oracle 8i
We have successfully deployed our application in 3-tier(remote mode) in JDev 9.0.3.2. using JClient, EO/VO, EJB Session Facade (BMT).
Now we are planning to use JDev 9.0.3.3 (build 1205)
We are using ejb.txn.type=local and Weblogic DataSource(non-txn).
In JDev 9033, after commit the data is not getting saved to DB. No errors in the log below.
This works fine in JDev 9032.
This does not work with simple Master Detail and also with single row simple form.
==========================================
[281] BaseSQLBuilder Executing DML ... (Update)
[282] Executing DML...
[283] UPDATE CISDBA.DCX_BASE_COST_V BaseCost SET ITEM_STAT=?,TID=? WHERE PART_NUM=? AND MY=?
[284] cStmt = conn.prepareCall(" UPDATE CISDBA.DCX_BASE_COST_V BaseCost SET ITEM_STAT=?,TID=? WHERE PART_NUM=? AND MY=?"); // JBO-JDBC-INTERACT
[285] cStmt.setObject(1, new BigDecimal((double) 2.0)); /*ItemStat*/ // JBO-JDBC-INTERACT
[286] cStmt.setObject(2, "t2733bx"); /*Tid*/ // JBO-JDBC-INTERACT
[287] cStmt.setObject(3, "04782612AA"); /*PartNum*/ // JBO-JDBC-INTERACT
[288] cStmt.setObject(4, "2004"); /*My*/ // JBO-JDBC-INTERACT
[289] cStmt.execute(); // JBO-JDBC-INTERACT
[290] cStmt.close(); // JBO-JDBC-INTERACT
BaseCostImpl: after doDML
BaseCostImpl: End of doDML()...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
[291] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[292] BaseSQLBuilder: setSavepoint 'BO_SP' ignored
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
[293] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[294] EJBTxnHandler: Commited txn
[BaseCostInvestCostViewImpl.afterCommit] Enter
[295] BaseCostInvestCostView2 notify COMMIT ...
[BaseCostInvestCostViewImpl.afterCommit] Exit
[BaseCostInvestCostViewImpl.afterCommit] Enter
[296] BaseCostInvestCostView1 notify COMMIT ...
[BaseCostInvestCostViewImpl.afterCommit] Exit
[297] SubDept2SubProgView1 notify COMMIT ...
[298] InvSubDeptLOV1 notify COMMIT ...
[299] SubProg2SubDeptView1 notify COMMIT ...
[300] SubProgramLOV1 notify COMMIT ...
[301] StdCostView1 notify COMMIT ...
[302] AltCostView1 notify COMMIT ...
[303] PlantCodeView1 notify COMMIT ...
[304] PaperCarView1 notify COMMIT ...
[305] InvestCostItemView1 notify COMMIT ...
[306] SavedSearchView1 notify COMMIT ...
[307] AltCostView1_BaseInvestToAltViewLink_AltCostView notify COMMIT ...
[308] InvestCostItemView1_BaseInvestToInvestItemViewLink_InvestCostItemView notify COMMIT ...
[309] PaperCarView_BaseCostTrackedVehicleViewLink_PaperCarView notify COMMIT ...
[310] VehicleProgramLOV1 notify COMMIT ...
[311] SubDeptLOV1 notify COMMIT ...
[312] Transaction timeout set to 28800 secs
[313] [NavigationEvent: BaseCostInvestCostView1 From 0 to 1]
[314] Column count: 14
[315] ViewObject : Reusing defined prepared Statement
[316] Binding param 1: 769661
[317] Binding param 2: 2004
[318] [RangeRefreshEvent: AltCostView1 start=-1 count=0]
[319] Column count: 13
[320] ViewObject : Reusing defined prepared Statement
[321] Binding param 1: 769661
[322] [RangeRefreshEvent: PaperCarView1 start=0 count=6]
[323] Column count: 4
[324] ViewObject : Reusing defined prepared Statement
[325] Binding param 1: INV37
[326] [RangeRefreshEvent: InvestCostItemView1 start=0 count=1]
[327] [NavigationEvent: AltCostView1 From -1 to -1]
[328] [NavigationEvent: PaperCarView1 From -1 to 0]
[329] [NavigationEvent: InvestCostItemView1 From -1 to 0]
========================================================

Hi Carsten,
I tried to reproduce your problem, but couldn't. Let me explain what steps I executed and perhaps you can advise where I've not matched your steps.
--Using build jdeveloper 9.0.3.3.1203, I built a new bc4j project containing a dept-emp default bc4j project (deptEntity, empEntity, deptView, empView, deptempFKAssoc, deptempFKViewLink, ApplicationModule).
--In dos shell, I went to the directory \jdevdir\jdev\bin and ran setvars -go to set the correct jdk version
--In the dos shell, in the directory \jdevdir\j2ee\home I executed the following command to install oc4j:
java -jar oc4j.jar (defaults pswd to welcome for admin)
--I remoted the appmodule to EJB Session Bean (BMT) and created a new deployment profile using the 9ias configuration for the application module.
--I deployed the bc4j objects to oc4j
--I created a new project
--In this project I created a new jclient master-detail form using the above project's application module for the data model
--I saved all and compiled the jclient project
--I ran the jclient form and inserted a master record
--I committed the transaction successfully
--I browsed records, then edited a record
--I committed the transaction successfully, then browsed.
Is there something I've missed? Did you migrate your project and not start by creating a new project? Is there something special about the database schema you are using?
Thanks,
Amy

Not getting Cost information when using /*+ RULE */ in toad 9.5

Hi,
While optimizing a query when I am using /*+RULE */ in the query I am not getting any info for cost and cardinality.
Can you tell me is the /*+RULE* / obsolete in oracle or what can be the reason.
Help me..
Thanks in advance.

948707 wrote:
Hi,
While optimizing a query when I am using /*+RULE */ in the query I am not getting any info for cost and cardinality.
Can you tell me is the /*+RULE* / obsolete in oracle or what can be the reason.
Why are you using that hint?
Aside from the fact that rule based optimization is obsolete, the optimiser can either do Rule based optimization or Cost based optimization. Why would you expect to get Cost based information when using Rule based optimization?
Don't use such hints. Cost based optimization is far superior to rule based.

Background CSS images not loading in firefox when using a CDN

Hello,
I am having trouble getting CSS background images to load in Fire fox when using a CDN.
Here is a description of the problem:
- Everything works fine in Chrome
- Any images loaded through CSS do not load in Firefox (they load in chrome) when i have the CDN enabled.
- Other images / custom fonts appear to load fine with the CDN enabled
My setup:
- wordpress 3.8
- CDN - Rackspace Cloudfiles synced with w3 total cache plugin (using the 'origin push' configuration)
- using Cloudflare (mozilla appears to load the site fine while cloudflare is active)
More about the problem--
I suspect that the problem has something to do with the htaccess file redirecting some urls or something-- but im not quite sure what to do about this.
Has anyone encountered this problem before who can offer some insight?
thanks

Hi pvijeh, is that the explanation for a security error? I'm having trouble understanding the context.

Calendar not showing multiple days when using Gmail option

Since I installed Mountain Lion the calendar when using the Gmail option does not show the bar (highlight ) when using multiple days. The detail transfer to My I pad perfectly and the Apple work & home are also working. If I click on the first day of an event then it is highlighted.

Automatic update from Apple, resolved problem.

Completion not recorded in LMS when using IE 11

Similar Messages

Maybe you are looking for