Completion requirement tick in maint plan

hi
requirement: when maint.pan is scheduled by ip10 then if in maint.plan header the completetion requirement tick is made.then irrespecive of that tick ip10 should generate orders but if earlier order is delayed by "x" days then next order should shift accordingly by "x" days
pls guide how to map the scenario
Please check you inbox for information from me
-Paul (Moderator)
Edited by: Paul Meehan on Feb 22, 2012 2:12 PM

Hello,
You have to remove completion required check box as it prevents the generation of work order until unless last work order have status TECO.I will suggest to use the FIXED call option in IP10 to delay the call as per your requirement if you dont want
to remove the check box for completion required.
Regards,
Rakesh

Similar Messages

Maint plan generating call before cycle.

Hi
I created single strategy plan for a fleet equipment
the cycle maintained is 250 mi (At 250 miles i need a notification)
The last counter reading is 200 mi only.
But when i run IP30 by giving the maint plan only it creating a notification.
If i execute IP30 again also it is generating notification.
Why it is creating notification before 250 mile is reached ?

Hi,
Annual Estimate should be maintained in case of even Measurement document is not created, but based on experience, if Maintenance Call object needs to be generated.
Also Annual Estimate is optional field, you can leave blank. While creating Maintenance Plan by assigning that Measuring Point, it will you Information message as Annual Estimate has not been maintained. You can skip that message & go with scheduling based on Measurement Document.
As you maintain 10000 in Annual Estimare, notification has been created immediately. Calculation would be 10000 for 365 days. So for example cycle value is 500, then 20 call objects would be created once in 18.25 days.
Annual estimate should be realistic. Also for your requirement, it is not required.
I hope its clear now.
Regards,
Maheswaran.
Edited by: Maheswaran.K on Apr 28, 2011 12:38 PM

PM- plant maint Prev-maint planning/ scheduling how ? change, add, etc

Dears,
appreciate your assistance.
we are having many PM work order in same near by area for related equip/ amchines. we like to generate one work order for all pms which are in limited area. if we get it we shall beable to generate one work order rather than ten work orders. how we can do it.
thanks
Mansoor.

dear Pushpa,
ya it is for palnt maintenance and for "preventive maintenance" planning and scheduling jobs.
u mean cover the equipments in equal number og maint-plans, cover all such plans in / under one maint-item.
now we have in way that one maint plan has more than one maint-item, and we are getting many work orders may be equal to number of maint-items, but our maint engineers want that all those being done at same time, so why not we make one work-order - but it should maintain equipment history.
i notice you are proposing opposit to what we have now.
In your proposed way will the equipment hisotry will be maintained for each equipment, that PM was called on --, planned for -- and completed on -- has been done.

Sort field in maint.plan&in ip30

hi
does some one implementd sort field use in img of maint plan
and does dead line monitoring in ip3o
whar are the benifits or scope
ponts will be rewarded

Hi,
The sort field is used to 'sort' plans according to different criteria that you need to configure.
For e.g. If a company has 200 Maintenance plans and you want to know all the plans valid for a certain division of the company. You can have these plans sorted as per company division.
You will need to configure the sort fields in IMG. If company name is COMP, then sort fields may be
COMPDIV1, COMPDIV2 etc (just an example).
For scheduling maintenance plans indvidually IP10 may be used. However in real scenarios. the transaction IP30 is used to do a scheduling of all the maintenance plans together.
Thanks,
KF

Change of Maint. Item in Maint Plan

Hi Experts,
is it possible to change of call object in Maintenance Plan,
as initially i've created maint plan with call object as order,
now instead of order ,i want Notification as call object,
please guide me if this is possible,
or i've to delete maint plan and create new maint plan
thanks in advance

Hi Pravin,
it is not possible to change call object in a maintenance plan. Even u create a new maintenance plan with same category u cant assign notification as call object. U hv to create Maintenance Plan category which has call object notification, then u can proceed.
narendra

PO- Why PO still allow to change after Delivery Completed has ticked.

Dear All,
I'm doing functional testing for MM, but i realised that the PO still allow to change after delivery completed has ticked.
Can i know if there is a way to restrict any change after any good receiving or delivery completed?
Thank you very much,
Regards,
Chee Wee

Hi,
Here we have same problem that after tick GR completed system allow to take further receipt though PO is not open.
we communicate with SAP and there is no function available to close the po for receipt until you reduce PO qty for GRN Qty or loca / delete line item.
We had write user exit to check tick in PO for GRN allow or not and that give error message.
You can do same for GRN.
Regards,
Chetan Mistry

How to display field SZAEH (Start Counter Reading) in IP01 for Maint Plan

Please let me know how i can configure field SZAEH (Start Counter Reading) to be displayed for data entry in IP01 for Maint Plan creation. I tried Tcode OIW0 but cou;dn't succeed.
ALl the help will be appreciated

Jain,
The start counter reading will automatically comeup in the scheduling parameter screen , if the maintenance plan is tied to a counter. Isnt this not coming up?
Regards
Narasimhan

Does Ipad - 2 require its own data plan

Does an ipad 2 require its own data plan?

Yes - if it is a 3G iPad. Each 3G device requires its own data plan. You do not have to activate a data plan - you can just use the WiFi and get a data plan if and when you need it.

Hiding Field in Maint Plan

Hi All,
I have to hide the business area field in Maint plan screen.
Kindly suggest.
Thanks,
Prabhu

Hi,
Thanks.........
I have to hide the field while creating a maint plan (IP01) with call object as maint order.
While creating a maint plan with Notification as a call object, business area field doesn't appear in the screen.
Kindly suggest.
Prabhu

Error "Invalid or Could not find module configuration" and "Required application module HyperionPlanning.planning is not configured

Dear
I use version 11.2.1, try to open an application one by planning and workspace is the error below.
"Invalid or Could not find module configuration" and "Required application module HyperionPlanning.planning is not configured"
I checked the oracle site, but the suggested solution is not possible because using the OHS and found the file HYSLWorkers.properties.
Solution
On the server que hosts the Apache component:
1. Navigate to HYPERION_HOME%% \ common \ httpServers \ Apache \ 2.0.59 \ conf
2. Edit the file named HYSLWorkers.properties,
3. Locate the entry starting with "worker.HP__8300.port"
4. Set its value to the value of the Planning web application's listening port incremented by two,
5. Save and close
6. Restart Apache only
Anyone have any suggestions?

If restarting the services does not help, run the EPM configurator again and configure foundation web server again then restart services and try logging into workspace
Cheers
John
http://john-goodwin.blogspot.com/

How to design maint plans

Hi friends ,
I have one equipment for which different maint tasks i have to perform
Sr no      Check point description                    frequency
1     Replace Hyd pp RL filter                              4 weeks
2     Replace GB oil for X axis mechanism     3 months
3      Chk flywheel motor current                      15 days
4      Clean heat exchanger if outlet water temp is more than 70 degrees
5     Lubricate flywheel brg after every        200 running hours
Is it possible with one maint plan or i have to apply diff plans
Can i include all tasks in same task list
plz Suggest.

A maintainance plan has maitainance items.
Attach this equipment to each maitainance items & attach task list pertaining to each equipment.
But when you want to schedule them differently I think you need different maintainance plans with different cycle duration.
Edited by: Sujit Gujar on Nov 17, 2011 5:25 PM

Reschduling the maint plan

Dear Friends
I would like to have some idea. Basically our maint plans are running back ground for order generation in automatic. But sometimes it is getting stopped by unknown reason.example last week call is stopped.
Now the users are reactivating
the by IP30. But after the job release the system producing two orders 1. past order is falling on today ent (job executed date) date 2. future order date. Here the stopped schdule order should not create on today date. The future order is acceptable .
How to control the stopped schdule falling on today date?

Hey Thenna,
Can you explain with example dates.
Sundar

Preventive Maint Plan Pending List

How to display the Preventive Maint Plan Pending List with column having maint plan,maint plan description,planning grp,functional location,plan date.

Hello,
Did you try IP16 ?
Cheers !

Maint plan

Hi All,
In IP41 maint. plan description is made as mandatory i/p field. Where i could find setings in SPRO.

this field is mandatory because the same text will be copied to maintenance order description once generated through maintenance plan
Regards,
E-Jad

List of steps required to create simple planning example

Hello
I am new to BPS
Could you please give me a list of steps required to create simple planning example.
Thanks
Message was edited by: Aleksandrs Frolovs

Hi Aleksandrs,
Here is some good info:
http://help.sap.com/saphelp_nw04/helpdata/en/5d/7c4b52691011d4b2f00050dadfb23f/content.htm

Completion requirement tick in maint plan

Similar Messages

Maybe you are looking for