Complex aggregates through answers

I have a sales table formatted like
country_id,product_id,date
(int,int,date)
or say, region, district, month in the paint demo
and I'd like to produce a single variance metric for each country_id/product_id pair based on the user's input of interval. Essentially, I want to group the number of orders by an interval (say, 20 seconds or whatever the user enters) and then do some sort of time series analysis on them (for example take the variance of that grouping)
If I were doing this in raw SQL I would create a nested query that built up the count of country_id/product_id/( count by date/20 ) and then worked over those values, but I was hoping OBIEE had some mechanism to work over such queries in a more intuitive manner. I can do this in Answers by creating hideously complex aggregates in the column formulas - is there a better way? This seems like a pretty common use case
thanks

Could you include a little worked example so its easier to visualise your requirement?

Similar Messages

  • Is it possible to get the value of variable through answers page ?

    Hi all,
    I had Dynamic variable ETLRundate . I want use this variable in Answers page to see the out put ?
    Is it possible to get the value of variable through answers page ?if so how I can use ?

    Hi
    Use the link below and download the documentation
    http://www.oracle.com/technology/documentation/bi_ee.html
    I think you will find what you are looking for in the Answers, Delivers, and Interactive Dashboards User Guide, but in short the syntax to display a variable value is as follows:
    As shown above the syntax for using a presentation variable is:
    @{variablename}{defaultvalue}
    For Session variables use:
    @{biServer.variables['NQ_SESSION.variablename']}
    For repository variables use:
    @{biServer.variables['variablename']}
    Rgds
    Ed

  • Error trying to set Do Not Aggregate through JAPI

    Hi
    API Version :11.1.2
    API Version Detail :Essbase JAPI version: 11.1.2.0.0.615
    I have an ASO outline with a two level dimension as follows:
    [-]-Unit Stored # Default # <1> (Label Only)
    L___dummy_u (+)
    I want to change the Level Usage for Aggregation to 'Do Not Aggregate' because once the dimension has a full complement of children, showing data against the "Unit" member will make no sense. Using EAS it's no problem and I end up with
    [-] Unit Stored # Do Not Aggregate # <1> (Label Only)
    L___dummy_u (+)
    But using the following JAPI method:
    member.setAggregationLevelUsage(IEssMember.ESS_AGGLEVELUSAGE_NOAGGREGATION);I get:
    I get:
    com.essbase.api.base.EssException: Cannot set aggregate level usage. Essbase Error(1060243): Invalid Aggregate Level Usage. Primary hiearachies cannot have usage 'Consider Bottom Level Only', Secondary hierarchies cannot have usage 'Consider Top Level Only' or 'Never Aggregate to Intermediate Levels'
    Does anyone know why it's possible through EAS but not the JAPI?

    I assume you're passing a numerical width value and not css attributes.
    I usually get this exception when I'm attempting to convert from a String to a numeric value and there is a leading or trailing space. Is there some white space in your properties file around this value?

  • Error while realigning aggregates through master data attr. change run

    Hi all,
    We are using Sales Overview cube (SD_C03) on which we have built aggregates. now during the master data attribute change run it tries to realign the aggregate once the master data is loaded via Process chain. In this step we are facing an error:
    "Error while procesing aggregate <aggregate technical name>"
    From ST22 we can find
    Database error text........: "ORA-14400: inserted partition key does not map to any partition"
    Internal call code.........: "[RSQL/INSR//BIC/F200009 ]".
    Whereas from SM21 we can find out:
    Database error 14400 at INS access to table /BIC/F200009.
    /BIC/F200009 is the fact table of one of the aggreates we have. really looking forward to your valuable suggestion.
    Thnaks,
    Abhishek.

    Hi Jogeswara Rao Kavala,
    When I am pressing back or NO option  it is showing error like this
    What is this OK- Code means?
    how can I resume this process, even it was not going to back screen also and only one option is available for exit from this is by going into MENU-SYSTEM-SERVICES-BATCH INPUT-CANCEL.
    Sunil Boya

  • Fill aggregates  through process chain?

    hi,
    we are creating aggregates on cube for perticular characters. when i use same thing in process chain, i am getting cube level, how can i find perticular character while filling aggregates in process chain?
    regards
    ss

    Hi Suneel,
    When you created the aggregate, you specified that chars that you wanted to put in each aggregate. Now in the process chain you just need to specify which cube's aggregates you want to be updated. No need to mention that chars again.
    Hope this helps...

  • Options Complex Aggregate in ODI interface

    I have one source and i need a one target aggregate table.
    I have implemented the next sample query:
    SELECT
    ATRIBUTE1,
    ATRIBUTE2,
    ATRIBUTE3,
    SUM(ATRIBUTE4),
    SUM(ATRIBUTE5),
    AVG(SUM(ATRIBUTE4+ATRIBUTE5)/ATRIBUTE6),
    FROM TABLE_AGG
    GROUP BY SUBSTR(ATRIBUTE1,0,6),ATRIBUTE2,ATRIBUTE3
    ¿Options to implement this query or similar please?
    Thanks

    Have you looked at this thread?
    how to use GROUP BY  in ODI
    Just add the SUM operator to the required target fields in your ODI interface and the GROUP BY clause will be added automatically by ODI. I note that you have a group by field that doesn't exist in your select list - was this deliberate?

  • My iTunes does not recognize disc burner.  I read through answers on the web page and followed the instructions for removing the GEAR drivers and then reinstalled iTunes.  It still says there is no disc burner or software installed.  Can anyone help?

    These are my diagnostics:
    Microsoft Windows 7 x64 Service Pack 1 (Build 7601)
    IBM 8114W2C
    iTunes 10.5.2.11
    QuickTime 7.7.1
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 00CEA7FC09BD5910
    Current user is not an administrator.
    The current local date and time is 2012-01-17 16:41:32.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: b7d08a26c0b28e9f17d324690b8df8ca
    iPodService 10.5.2.11 (x64) is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: LITE-ON DVD SOHD-16P9S, Rev FUS5
    Data or MP3 CD in drive.
    Found 1 songs on CD, playing time 47:21 on CDROM-XA media.
    Track 1, start time 00:02:00
    Get drive speed succeeded.

    Couple of things I spotted right off ... diagnostics still don't show me as an administrator but I told it run as administrator.  When it asked to insert a prerecorded CD and then choose which drive to use, I have no drives in the menu to choose from but yesterday I had 2 and shows no external plug-ins installed.  Hmmm.  Fresh diagnostics below ...
    Microsoft Windows 7 x64 Service Pack 1 (Build 7601)
    IBM 8114W2C
    iTunes 10.5.2.11
    QuickTime 7.7.1
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.2.0
    CD Driver DLL 2.1.3.0
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 00D4AB7C099BA9C8
    Current user is not an administrator.
    The current local date and time is 2012-01-18 19:18:55.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: b7d08a26c0b28e9f17d324690b8df8ca
    iPodService 10.5.2.11 (x64) is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.

  • Complex Aggregate Aware Problem

    I am facing issue with @AA() in following the scenario.
    I have a measure with following definition:
    m1= @AA(FT1\ftm1,AT1\atm1,AT2\atm2,FT2\ftm2)
    Where,
    AT1\atm1=@AA(ATA1\atam1,ATA2\atam2)
    Similar definition is also applicable for dimensions from AT1
    AT1\atd1=@AA(ATA1\atad1,ATA2\atad2)
    I have marked the ATA1 and ATA2 incompatible with all the objects derived from FT1 and FT2 and vise verse.
    Definition of Dimension object from AT1 is as follows:
    atd1= @AA(ATA1\atad1,ATA2\atad2)
    There is another dimension table related to all the tables.
    FT1->DimA1
    FT2->DimA1
    ATA1->DimA1
    ATA2->DimA1
    Now, When I drag dimension DimA1,AT1 and measure m1 it creates 2 queries as:
    Q1: select DimA1,ATA2 from DimA1,ATA1
    Q2: select DimA1,FT1\ftm1 from DimA1,FT1
    Its very tedious but this is the most simplest version in which I can describe...

    Hi
    Look what I have done:
    1) Here is view of my JSF Page and components: http://img695.imageshack.us/img695/4218/21964358.jpg
    On the left there is my Data Control for Web Service. The input is simple Integer and the results are many rows (here is result form EM console test: http://img41.imageshack.us/img41/8803/23008039.jpg )
    The input value form is made by drag and drop entire execute(Integer) as ADF Parameter Form. The id of execute button is cb1.
    The results are made by drag and drop PassDetails as ADF Read Only Table.
    2) I did a Create Method Binding For Action for execute button as you suggested. Adding New Bean: [Bean Name - BindingMethod] [Class Name - BindingMethod] [Scope - request]. It was created a java file as seen on this picture - http://img11.imageshack.us/img11/8192/17868604.jpg I've added your code.
    3) I've also put Refresh Condition: #{adfFacesContext.initialRender} for PassDetailsIterator - http://img35.imageshack.us/img35/2271/85080775.jpg
    Thats all I've done. When running page the ADF Table is not fetching data. When I enter Input Value there are no results in ADF Table, but the instance of my web service is completed.
    When I put Refersh Condition #{!adfFacesContext.initialRender} it automatically fetchind data.
    What should I change in my application? Please help?
    Best regards MK.

  • WAIK - Install apps from image or through answer file?

    Hello everyone =)
    So I'm new to Windows 7 deployment, and my first project is a standard image for ~25 computers, with some settings and standard software such as MS Office 2010, antivirus/anti-malware software, standard file viewers, etc...
    In the absence of network infrastructure, I'm relying solely on WAIK to automate, excluding tools like MDT and WDS. According to the doc, I'm setting up a "High Touch Deployment with Standard Image".
    I've been reading a lot of documentation and so far, I understand that there are basically two ways to deploy applications on top of Windows:
    Install them on the reference computer, in audit mode, before making the image
    Use an Answer File inside a Configuration Set with an $OEM$ folder to run silent installs
    I'm not sure what the differences or advantages/disadvantages are for either method. Is there one that's recommended over the other?
    Thank you for reading!

    If you have single model computer set, then install one computer including applications, tune it and adapt interface. Sysprep.xml file does need to be complicated. Do not forget to include
    copyprofile parameter. Run sysprep and shutdown.
    Copy image (with tool that you consider the most simple) to all computers. Start computers and include parameters that you have not included in unattended file. 
    In summary: If you are new and need to do the task in relatively short time, do not optimize your procedures. You will do it next time when you face second similar task.
    Regards
    Milos

  • I don't have time to look through answers other users have posted when i have an issue with your product. that's poor technical support. I downloaded the update and now my "go back one page" button doesn't work. you need to improve your support options.

    Are you kidding me that your response is I need to create an account?

    Call Apple Customer Relations - 1-800-275-2273.  Ask politely & firmly that you want to be transferred to Customer Relations.  Tell them exactly what you stated in your post.
    GOOD LUCK!
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.  

  • I can receive mail but cannot answer or forward or do anything with the body  of the message including scroll through it.

    My mail program has stopped  working. I can receive emails but cannot do anything with the message,scroll through, answer or create a new message to be sent.

    Quit the mail app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or .... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Complex SQL calculated/Group Query

    I am trying to write a complex aggregate query(s) to compile a standings table for a soccer league.
    There are four related tables:
    Matches
    Goals
    Players
    teams
    I have yet to finalize the database structure so I can add fields if necessary.
    In the goals table I track the match that the goal was scored in and which player
    scored it.
    I am trying to create a query that will give me a standings table.
    The fields I need to calculate are:
    team name
    Wins
    Loses
    Draws
    For instance:  There was a match on 4/21/2012.  The players on HomeTeam(A) scored a combined 6 goals.  The players on AwayTeam(B) scored 1 goal (All stored in the Goals table).  Therefore, Hometeam won by a score of 6-1.  I need
    a query that spits out:
    Team                Wins          Losses          Draws         
    Points
    HomeTeam(A)      1                 0                 0                
    3
    AwayTeam(B)       0                 1                 0                 3
    Wins are worth 3 Losses 0 and Draws 1 point each team.
    I am a long time SQL admin, but I think the complexity of calculating this is a little beyong me.  I need some help to get where I need to be.

    Okay, I haven't yet been able to figure out the draws because of the trouble of linking back to both teams, but here's what I have so far.
    First, here is the test data:
    Declare @tvMatches Table (
    MatchID int IDENTITY(1,1)
    ,MatchDate datetime
    ,HomeTeamID int
    ,AwayTeamID int
    Declare @tvGoals Table (
    GoalID int IDENTITY(1,1)
    ,MatchID int
    ,PlayerID int
    ,TeamID int
    Declare @tvPlayers Table (
    PlayerID int IDENTITY(1,1)
    ,TeamID int
    ,PlayerName varchar(30)
    Declare @tvTeams Table (
    TeamID int IDENTITY(1,1)
    ,TeamName varchar(20)
    Insert @tvTeams
    Select 'Winners'
    Union All
    Select 'Losers'
    Union All
    Select 'Friars'
    Union All
    Select 'Planes'
    Insert @tvPlayers
    Select 1, 'Bill'
    Union All
    Select 1, 'Jim'
    Union All
    Select 1, 'Ken'
    Union All
    Select 2, 'James'
    Union All
    Select 2, 'Smithy'
    Union All
    Select 2, 'Flip'
    Union All
    Select 3, 'Dave'
    Union All
    Select 3, 'Alan'
    Union All
    Select 3, 'Ethan'
    Union All
    Select 4, 'Naomi'
    Union All
    Select 4, 'Erland'
    Union All
    Select 4, 'Alejandro'
    Insert @tvMatches
    Select '20120101', 1, 2
    Union All
    Select '20120201', 3, 4
    Union All
    Select '20120301', 4, 1
    --Winners beat Losers 3-2
    --Planes beat Friars 4-2
    --Winners beat Planes 2-1
    Insert @tvGoals --Match, Player, Team
    Select 1, 1, 1
    Union All
    Select 1, 3, 1
    Union All
    Select 1, 5, 2
    Union All
    Select 1, 6, 2
    Union All
    Select 1, 2, 1
    Union All
    Select 2, 7, 3
    Union All
    Select 2, 8, 3
    Union All
    Select 2, 10, 4
    Union All
    Select 2, 11, 4
    Union All
    Select 2, 12, 4
    Union All
    Select 2, 11, 4
    Union All
    Select 3, 1, 1
    Union All
    Select 3, 3, 1
    Union All
    Select 3, 11, 4
    Using this test data, you want to compile the actual match outcomes.  This can be problematic to do on the fly every time though, if you have a lot of matches or teams to calculate for.  But, with a simple cte, we have:
    ;with cteMatches as
    Select m.MatchID
    ,m.MatchDate
    ,m.HomeTeamID
    ,ht.TeamName HomeTeamName
    ,m.AwayTeamID
    ,at.TeamName AwayTeamName
    ,( Select Count(1)
    From @tvGoals g
    Where g.MatchID = m.MatchID
    And g.TeamID = m.HomeTeamID
    ) HomeScore
    ,( Select Count(1)
    From @tvGoals g
    Where g.MatchID = m.MatchID
    And g.TeamID = m.AwayTeamID
    ) AwayScore
    From @tvMatches m
    join @tvTeams ht
    on m.HomeTeamID = ht.TeamID
    join @tvTeams at
    on m.AwayTeamID = at.TeamID
    ) --select * from cteMatches
    This returns the MatchID, MatchDate, team information and the score.  Basically, you have the match, team and player data tied to the goals table, so you just do a count (using correlated subqueries) to get the score of each team.  Next step is
    to calculate the winner and loser (and eventually whether there even was a winner) by comparing the scores:
    ,cteWinners as
    Select cm.MatchID
    ,cm.HomeTeamID
    ,cm.HomeTeamName
    ,cm.AwayTeamID
    ,cm.AwayTeamName
    ,Case
    When cm.HomeScore > cm.AwayScore Then cm.HomeTeamID
    When cm.HomeScore < cm.AwayScore Then cm.AwayTeamID
    Else 0
    End WinningTeamID
    ,Case
    When cm.HomeScore > cm.AwayScore Then cm.AwayTeamID
    When cm.HomeScore < cm.AwayScore Then cm.HomeTeamID
    Else 0
    End LosingTeamID
    From cteMatches cm
    ) --select * from ctewinners
    This returns MatchID, team information and the ID's for winning and losing teams.  For now it returns 0 if it's a draw.  Once we know the outcomes of all the matches, we calculate the actual win/loss for each team:
    ,cteRecords as
    Select t.TeamName
    ,Count( Case
    When cw.WinningTeamID = t.TeamID Then 1
    End
    ) Wins
    ,Count( Case
    When cw.LosingTeamID = t.TeamID Then 1
    End
    ) Losses
    From @tvTeams t
    join cteWinners cw
    on t.TeamID = cw.HomeTeamID
    or t.TeamID = cw.AwayTeamID
    Group By t.TeamName
    ) --select * from cteRecords
    That last cte returns just team name, and then the number of wins and losses for each team.  This is where I got stuck with the draws, because I'm not quite sure yet how to properly assign a draw to both teams involved.
    Now, finally you put it all together with some simple match to determine the points, and there you are:
    Select TeamName
    ,Wins
    ,Losses
    ,(Wins * 3) Points
    From cteRecords

  • Building complex flash game in Flash Builder 4 - Workflow/Best Practices

    I'm investigating switching to Flash Builder 4 for building a complex game that currently lives purely inside Flash CS4.  CS4 is a pretty terrible source code editor and debugger.  It's also quite unstable.  Many crashes caused by bad behavior in the SWF will take out the entire IDE so are almost impossible to debug.  And I've heard other horror stories.  To be clear, for this project I'm not interested in the Flex API, just the IDE.
    Surprisingly, it seems Flash Builder 4 isn't really set up for this type of development.  I was hoping for an "Import FLA" option that would import my Document Class, set it as the main entry point, and figure out where other assets live and construct a new project.  What is the best workflow for developing a project like this?
    What I tried:
    -Create a new Actionscript Project in the same directory where my CS4  lives
    -Set the primary source file to match the original project's source file and location
    -Set my main FLA as "export to SWC", and added "SWC PATH" to my flash builder 4 project.
    -Compile and run.. received many errors due to references to stage instance. I changed these to GetChildByName("stagename").  Instead, should I declare them as members of the main class?  (this would mimic what flash CS4 does).
    -My project already streams in several external SWF's.  I set these to "Export SWC" to get compile-time access to classes and varaibles. This works fine in cs4, the loaded SWF's behave as if they were in the native project.  Is the same recommended with FB4?
    -Should I also be setting the primary FLA as "export to swc"?  If not, how do I reference it from flex, and how does flex know which fla it should construct the main stage with?
    Problems:
    -I'm getting a crash inside a class that is compiled in one of the external SWF's (with SWC).  I cannot see source code for the stack inside this class at all.  I CAN see member variables of the class, so symbol information exists.  And I do see the stack with correct function names.  I even see local variables and function parameters in the watch window! But no source.  Is this a known bug, or "by design"? Is there a workaround?  The class is compiled into the main project, but I still cannot see source.  If FLEX doesn't support source level debugging of SWC's, then it's pretty useless to me.   The project cannot live as a single SWF.  It needs to be streaming and modular for performance and also work flow. I can see source just fine when debugging the exact same SWC/SWF through CS4.
    -What is the expected workflow with artists/designers working on the project?  Currently they just have access to all the latest source, and to test changes they run right through flash.  Will they be required to license Flash Builder as well so they can test changes?  Or should I be distributing the main "engine" as a SWF, and having it reference other SWF files that artists can work on?  They they compile their SWF in CS4, and to test the game, they can load the SWF I distribute.
    A whitepaper on this would be awesome, since I think a lot of folks are trying to go this direction.  I spent a long time searching the web and there is quite a bit of confusion on this issue, and various hacks/tricks to make things work.  Most of the information is stale from old releases (AS2!).
    If a clean workflow I would happily adopt Flash Builder 4 as the new development tool for all the programmers.  It's a really impressive IDE with solid performance, functional intellisense, a rich and configurable interface, a responsive debugger..I could go on and on.  One request is shipping with "visual studio keyboard layout" for us C++ nerds.
    Thanks very much for reading this novel!

    Flash builder debugging is a go!  Boy, I feel a bit stupid, you nailed the problem Jason - I didn't have "Permit Debugging set".  I didn't catch it because debugging worked fine in CS4 because, well, CS4 doesn't obey this flag, even for externally loaded SWF files (I think as long as it has direct access to the SWC). Ugh.
    I can now run my entire, multi SWF, complex project through FB with minimal changes.  One question I do have:
    In order to instantiate stage instances and call the constructor of the document class, I currently load the SWF file with LoaderContext.  I'm not even exporting an SWC for the main FLA (though I may, to get better intellisense).  Is this the correct way of doing it?  Or should I be using , or some other method to pull it into flex?  They seem to do the same thing.
    The one awful part about this workflow is that since almost all of my code is currently tied to symbols, and lives in the SWF, any change i make to code must first be recompiled in CS4, then I have to switch back to FB.  I'm going to over time restructure the whole code base to remove the dependency of having library symbols derive from my own custom classes.  It's just a terrible work flow for both programmers and artists alike.  CS5 will make this better, but still not great.  Having a clean code base and abstracted away assets that hold no dependencies on the code  seems like the way to go with flash.  Realistically, in a complex project, artists/designers don't know how to correctly set up symbols to drive from classes anyway, it must be done by a programmer.  This will allow for tighter error checking and less guess work.  Any thoughts on this?
    Would love to beta test CS5 FYI seeing as it solves some of these issues.
    Date: Thu, 21 Jan 2010 15:06:07 -0700
    From: [email protected]
    To: [email protected]
    Subject: Building complex flash game in Flash Builder 4 - Workflow/Best Practices
    How are you launching the debug session from Flash Builder? Which SWF are you pointing to?
    Here's what I did:
    1) I imported your project (File > Import > General > Existing project...)
    2) Create a launch configuration (Run > Debug Configuration) as a Web Application pointing to the FlexSwcBug project
    3) In the launch config, under "URL or path to launch" I unchecked "use default" and selected the SWF you built (I assume from Flash Pro C:\Users\labuser\Documents\FLAs\FlexSwcBug\FlexSwcBugCopy\src\AdobeBugExample_M ain.swf)
    4) Running that SWF, I get a warning "SWF Not Compiled for Debugging"
    5) No problem here. I opened Flash Professional to re-publish the SWF with "Permit debugging" on
    6) Back In Flash Builder, I re-ran my launch configuration and I hit the breakpoint just fine
    It's possible that you launched the wrong SWF here. It looks like you setup DocumentClass as a runnable application. This creates a DocumentClass.swf in the bin-debug folder and by default, that's what Flash Builder will create a run config for. That's not the SWF you want.
    In AdobeBugExample_Main.swc, I don't see where classCrashExternal is defined. I see that classCrashMainExample is the class and symbol name for the blue pentagon. Flash Builder reads the SWC fine for me. I'm able to get code hinting for both classes in the SWC.
    Jason San Jose
    Quality Engineer, Flash Builder
    >

  • Complex Po Import -Error while loading the data

    Hi all,
    I m trying to upload complex PO through Standard interface Program and I am getting the below error ,all the setups are fine.
    Kindly guide me to resolve this is issue as this is very critical for us.
    Error: Style (STYLE_ID = 201) with progress payments is not supported.
    Is it possible to load Complex PO thru' backend ?

    958542 wrote:
    Hi all,
    I m trying to upload complex PO through Standard interface Program and I am getting the below error ,all the setups are fine.
    Kindly guide me to resolve this is issue as this is very critical for us.
    Error: Style (STYLE_ID = 201) with progress payments is not supported.
    Is it possible to load Complex PO thru' backend ?Please see these if these bugs/docs help.
    Bug 10237284 : PROVIDE USER'S GUIDE FOR PURCHASING OPEN INTERFACES
    Release 12 Oracle Purchasing API and Open Interface Changes [ID 437587.1]
    Thanks,
    Hussein

  • Unable to receive Buyer Work Centre Complex PO

    Dear All,
    I created Complex PO through Buyer Work Centre and approved it but when i go to receive this PO system not found the PO, even i select the same organization. Kindly help me regarding this issue.
    Regards,

    user12217438 wrote:
    ok so how can i create invoice and match with this PO
    Regards,Hi,
    There are two options.
    1. Run the Receiving Transaction Processor once the work confirmation is created which will create a receipt. Then you create invoice manually and match accordingly.
    2. If you are using RCTI, then the invoice will also be created automatically along with the receipt.
    Thanks,
    PS.

Maybe you are looking for

  • Bpm workspace xhtml/jsf customisation

    Hi, Can anyone help me with customising component.xhtml/layout.xhtml?? I would like to know how workspace differentiates default layout and customised layout. I need to include my own custom page in the new layout created using iframe but am unable t

  • How to instanciate Class Dynamically

    I need to create instance and use class dynamically. Suppose the codes instantiating an Object weather: Weather weather=new Weather();but i want to do it dynamically, where the class name will be given as a String variable in this case i will have St

  • Pass-parameter to query

    Hi guys, JDev Newbie here. I wish to make a 2 pagelayout. The main layout is composed of ex. single textbox. If the user pressed enter on that textbox, the 2nd pagelayout. The 2nd pagelayout will use the 1st page layout textbox value for query. How t

  • 'Refreshing' iPhoto Library?

    Hello, <question> Is there anyway to make changes to a photo outside of iPhoto (say, resize the image), then 'refresh' iPhoto to recognize the changes? I don't recommend saying iPhoto will do this automatically, because I'm sure my version (5.0.4) wo

  • Integer.parseInt problems

    Hi everyone, I want to use the Integer.parseInt and Byte.parseByte methods to parse hex strings - the problem is that they don't parse negative 2's complement numbers, they explicitly need a minus sign in front of an otherwise unsigned number to show