Complex data type to application service create method(CRUD)(Urgent)

Hi Experts,
I have created an entity service with remote persistency(Web service).i am mapping the entity service CRUD methodes to web service methodes and i am calling these CRUD methodes form the corresponding applicaion service CRUD methodes.With out complex data types both sevices are working fine.I have tested them in the service browser.
Later I have created a complex data type in the entity service and mapped it to web service.But when i am creating the application service create(CRUD) method for this entity service the complex data type which i have created in the entity service is not being shown as possible input attributes of the application service create method.Due to this i am not able to pass this complex attribute form the application service create method to the entity service create method.
Plz tell me how can i resilve this issue.(Urgent)
Thanks
Sampath.G

Hi Sampath,
Please check SAP note 1004108. I think the issue you describe is one of the limitations described in this note.
Regards,
Jan

Similar Messages

Working with complex data types in web services ...

Hi All,
I have created a webservice and created an interface for that in ADF. Now as my web service returns a complex data type, i followed the steps given in this article "http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html" and it works fine, my results also get displayed. But only issue is i get a warning "JBO-25009: Cannot create an object of type:java.util.calendar with value:2008-09-23T23:51:30.000+05:30" and if i replace all the java.util.Date with oracle.jbo.domain.Date then i get a warning "JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value:2008-09-23T23:51:30.000+05:30". Now i am unable to understand this although i believe it is a data type mapping issue, but not sure how to rectify it.
Anybody knows the wayout?
Regards
Lokesh

Andre,
Thanks for youe response. I also tried makeing data type as string in place of date in data control.xml and it worked fine. So it confirms that i am facing with exactly similar issue as yours.
I tried solution 2 mentioned in Frank's mail but its not helping[in fact i am already using web proxy as i am delaing with complex data types]. I created a web proxy and in java bean i placed break points to check the control flow[in order to check the root cause] but control never reaches the java bean!! I am not sure about the cause for it...control should pass through java bean isn't it??
I am quite new to SOA...so can somebody just elaborate on how to rectify this using web proxy. I have been using this rl "http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html" to work with web proxies" to work with proxies.
Regards
Lokesh

Custom/Complex data types in web services

Hi,
I've read in several articles here on otn that JDev 9.0.3 would have better support for
creating web services with complex datatypes (like java.util.LinkedList), but still (in the 9.0.3 Preview)
theese methods are greyed out on the web service wizard. Am I missing something?
Until now I've worked with Custom Serializers, but they are time consuming and hard to work with.
/Mattias

Here are the two articles that will help:
JavaBeans as Web services parameter types:
http://otn.oracle.com/tech/webservices/htdocs/samples/customtype/content.html
Registering Web services custom serializers:
http://otn.oracle.com/tech/webservices/htdocs/samples/serialize/content.html
The new support in JDev 9.0.3 is that JavaBean parameters are now recognized by the JDev publishing wizards whereas in JDev 9.0.2 there was the workaround pointed to by the first article. In 9.0.2 the publishing support was only for primitive data types.
The upside of the custom serializers, is you can re-use your existing serializers if they happen to have been written to Apache SOAP.
Mike.

Creating Web service for PL/SQL Procedure with Complex Data Types

I need to created web service for PL/SQL Procedure with Complex Data types like table of records as parameters, how do we map the pl/sql table type parameters with web service, how to go about these?

Hello,
When you are creating a service from a Stored Procedure, the OracleAS WS tools will create necessary Java and PL wrapper code to handle the complex types (table of record) properly and make them compatible with XML format for SOAP messages.
So what you should do is to use JDeveloper or WSA command line, to create a service from your store procedure and you will see that most of the work will be done for you.
You can find more information in the:
- Developing Web Services that Expose Database Resources
chapter of the Web Service Developer's guide.
Regards
Tugdual Grall

Can "SPML Web Service Complex Data Type field" take multiple values ?

In Generic Technology Connector's -SPML design parameters section, Can we give multiple values in SPML Web Service Complex Data Type field?
If not, how can i call methods directly instead of calling them through a values of the "name" attribute of the "complexType" element in SPML Web Service Complex Data Type?
I need 'SPML Web Service Complex Data Type' to hold multiple values.And based on the request it has to initiate appropriate method of action.
Presently i have three methods add,modify and delete which i am calling through a single value of the "name" attribute of the "complexType" element in SPML Web Service Complex Data Type.
I want to replace this single value with multiple menthods , so that a direct interaction between the method,OIM and target can be established.
Edited by: 821054 on 16/02/2011 04:23

Thanks Robert.
You'll need to create your own interface to the webapp database for those kind of data operations
by this, are you speaking of the internal BC database which stores web app schema data? That would be great if it were possible to update that programmatically because I need to use the List (Checkbox List) field type (for the search functionality), but I need to supply the checkbox options from a web app rather than by manually updating the list entered in the Fields view of the web app settings (shown below).
I'm curious if anyone else has tried this?
Again, my reason for needing to use the List (Checkbox List) field type is that the page which processes searches knows to expect a comma separated list for this field type and then appears to be parsing out the individual values for searching out web app items with 1 or more matching values. You're right that text fields (string and multiline) just check for 'string contains' matches, and this would be ok if I was only ever needing to search just one value at a time. Here's an example of what I might do:
Web App item field value (as recorded against the List (Checkbox List) field type:
8294877,8294878
Web App Search value (for this same field):
8294879,8294877,8294885
The search would return this web app item because the field contains 2 (1 or more) individual values even though they were entered into the search field in a different order. If this web app item were just a Text (string or multiline) field, the searched value is not a substring of the web app item's stored value, so it would not find a match. Hence the need to use Checkbox List field type.
The web app will have thousands if not 10s of thousands of records, so dumping them all into one big array or object and searching on the front-end won't be practical (though it works great on smaller datasets).

Consuming an ASP web service which responds with complex data types...

Here's my problem - I'm trying to consume a web service from a provider that uses complex data types.
The starting part of the WSDL looks like this (I've not included the whole thing) - named have been changed to protect the innocent:
<wsdl:definitions targetNamespace="http://domain_name">
<wsdl:types>
<s:schema elementFormDefault="qualified" targetNamespace="http://domain_name">
<s:element name="Authentication">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Username" type="s:string"/>
<s:element minOccurs="0" maxOccurs="1" name="Password" type="s:string"/>
<s:element minOccurs="0" maxOccurs="1" name="Token"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="AuthenticateResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="AuthOK" type="s:int"/>
<s:element minOccurs="0" maxOccurs="1" name="Token"/>
</s:sequence>
</s:complexType>
</s:element>
Since it's a complexType return, with a sequence, I'd expect an array or structure returned, but instead I just get the "AuthOK" value, and no way to get anything else.
Here are the ways I've tried calling it:
<cfscript>
    WS = createObject("webservice", "https://WSDL_URL");
    WS_ret = WS.Authentication(Username = "username", Password = "password", Token = "");
</cfscript>
<cfdump var="#WS_ret#" />
<cfinvoke webservice="WSDL_URL" method="Authentication" returnVariable="WS_ret">
    <cfinvokeargument name="userID" value="7253320" />
    <cfinvokeargument name="password" value="ctpjxs3" />
    <cfinvokeargument name="SecurityToken" value="" />
</cfinvoke>
<cfdump var="#WS_ret#" />
Any ideas how I can get the other variables in the sequence? I have other calls after this that have a much larger amount of variables, and as such I can't use it without being about to get more of the

Thanks for the reply.
If I CFDUMP the variable it returns just "1", no XML tags, nothing at all around the data - according to the web service providers they say that they are supplying the Token part as long as the first variable is "1" (a logical true if the authentication passed). If it is "0" then no Token is returned, that is why it's optional.
As for the CFdocs issue, look here:
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=webservices_25.html
The paragraph before it (about 2/3 down the page) states:
In this example, the operation updateEmployeeInfo takes a complex type as input and returns a complex type as output. To handle the input parameter, you create a structure. To handle the returned value, you write it to a ColdFusion variable, as the following example shows:
It even states that you call "updateEmployeeInfo", and nowhere mentions "echoStruct" as a method - it's seemingly been put in as a random method name, or a function call for something else. The WSDL above the example only mentions "updateEmployeeInfo" and "updateEmployeeInfoSoapOut", again not mentioning "echoStruct".
I see this as an error in the docs as it's calling a non-existant entity in the WSDL, which should cause a run-time error.

How to access complex data type from a soap web services?

hello
can u please tell me how can i access complex data type from a soap web service from jdeveloper 10g
Jdeveloper generates 3 classes
serviceStub
getproperties
response
i have to retreview the data which is a complex data type it gives some
unknown type. and the return value is a key-value pair data type .
regards
vs

After you create the partner link and the invoke (to create the variables), change the element type of the response message to the complex type definition of your collection that appears in the XSD. You can do the same thing if you want to change the element type of the payload of the request message as well.

How to reference complex data type when consuming web services in WAS 620?

In WAS 620, I tried to consume a web service in ABAP. I was successful when the web service returned one or more simple data type. But when the web service is changed to return a complex data type (eg. a structure with 3 elements), the call to the web service did not return anything.
Do any of you know how to reference the individual element in the structure of an output parameter in a web service? I use the add_parameter method of the CSoapDocument class to identify the output parameters.
Here is part of the WSDL file:
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="urn:sap-com:document:sap:rfc:functions">
- <types>
- <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions">
- <xsd:element name="Z_SRM_SOAP_TEST_COMPLEX">
- <xsd:complexType>
- <xsd:all>
- <xsd:element name="INTEXT">
- <xsd:simpleType>
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
- <xsd:element name="Z_SRM_SOAP_TEST_COMPLEX.Response">
- <xsd:complexType>
- <xsd:all>
<xsd:element name="OUTTEXT" type="s0:ZSRM_TEST_STRUCT" />
</xsd:all>
</xsd:complexType>
</xsd:element>
- <xsd:complexType name="ZSRM_TEST_STRUCT">
- <xsd:sequence>
- <xsd:element name="ELEMENT1" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="ELEMENT2" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="ELEMENT3" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</types>

Hi,
[email protected] is my id and one more thing u by looking at the wsdl file u can know what al the parameters we have to give to the webservice so try it out also.
Regards,
Sirisha.

Best Practices Web Services - Complex Data Types

Can someone provide some best practices documentation or info that for customers using CR against web services? Speciffically any information on complex data types such as String[] or Address.
Thanks
Ian S

And That's what I did.
name.cfc is the component that has complex data types
created.

Call a method with complex data type from a DLL file

Hi,
I have a win32 API with a dll file, and I am trying to call some methods from it in the labview. To do this, I used the import library wizard, and everything is working as expected. The only problem which I have is with a method with complex data type as return type (a vector). According to this link, import library wizard can not import methods with complex data type.
The name of this method is this: const std::vector< BlackfinInterfaces::Count > Counts ()
where Count is a structure defined as below:
struct Count
Count() : countTime(0) {}
std::vector<unsigned long> countLines;
time_t countTime;
It seems that I should manually use the Call Library Function Node. How can I configure parameters for the above method?

You cannot configure Call Library Function Node to call this function. LabVIEW has no way to pass a C++ class such as vector to a DLL.

Web Services Complex Data Type Query

Newbie trying to understand how to work with Complex Data
Type. Came across the following example in the Dev Guide
What is wrong with Client Code? What am I missing?
Please help
Thanks
Prashanth

And That's what I did.
name.cfc is the component that has complex data types
created.

Apex, Web Services, and complex data types?

Hi all,
I was wondering if somebody could explain to me what sort of support apex has for using web services with complex data types, and how data returned like this could be interpreted and stored in the database.
Any help would be aprreciated.
Thankyou in advance

Hi can anyone help me with this?

Parse/read complex data types in WSDLs

i need to read the WSDL and identify the Ports, Operation, Bindings and types.
My intention is to compare 2 WSDLS and also to create a UI client for web Service based on the WSDLs.
My issue here is the WSDL contains Complex Data Type,i couldnt find classes that cud help me to read the complex/custom data types.
A portion of wsdl is given below.
<definitions ..>
<types>
<xsd:schema ....">
<xsd:annotation>..
</xsd:annotation>
<xsd:complexType name="Address">
<xsd:sequence>
<xsd:element name="Address" maxOccurs="unbounded" minOccurs="0" type="xsdLocal:Address"></xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Name"><xsd:sequence>
<xsd:element name="LastUpdated" maxOccurs="1" minOccurs="0" type="xsd:string"></xsd:element>
<xsd:element name="House No" maxOccurs="1" minOccurs="0" type="xsdLocal1:string15"></xsd:element>
<xsd:element name="City" maxOccurs="1" minOccurs="0" type="xsdLocal1:string30"></xsd:element>
</definitions>{code}
I got the Operations in the WSDLs as shown below.
The input parameters are not direct parameters , they as nested/complex data types which i couldnt find a way to read..
{code}
protected void assertPortTypes(Definition definition) {
         Map portTypes = definition.getPortTypes();
         for (Object p : portTypes.values()) {
           PortType portType = (PortType) p;
           String portTypeName = portType.getQName().getLocalPart();
           System.out.println("portTypeName\t"+portTypeName);
              for (Object o : portType.getOperations()) {
               Operation operation = (Operation) o;
               String operationName = operation.getName();
                  System.out.println("operationName\t"+operationName);
{code}
Could any one please tell me if it is possible to parse the WSDL to read the Complex data types using java-wsdl classes
Kindly give me the approaches that i could take here...
thanks
vyas

No, I am not using the AAL functions, but I was relying on the C99 support of clang and this document. The title of this document suggests that these extensions should also be available in CVI2015, CVI2017...

Using Complex Data Types in Import JavaBean Model

Hi,
I have searched and read forums and weblogs related to import javabean model.
But I am not clear about how to use complex data types like ArrayList, Collection etc in my java bean.
If I use these complex datatypes in my bean, when creating model in WDF it displays the Complex data elements in Model Relation. I dont know how to use this model relation in my WD project.
Anyone please explain the<b> step by step solution</b> about using complex data type(used in Bean) in WD Project.
Thanks,
Krishna Kumar

Hi Krishna,
Valery`s blog contains sample code ( http://www.jroller.com/resources/s/silaev/Employees.zip )
Another blogs from this area:
/people/anilkumar.vippagunta2/blog/2005/09/02/java-bean-model-importer-in-web-dynpro
/people/valery.silaev/blog/2005/08/30/javabean-model-import-when-it-really-works
And forum topics:
Import JavaBean Model
Problem Importing JavaBean Model in NetWeaver Developer Studio
Issue on "Import JavaBean Model"
import JavaBean Model: no executable Methods?
JavaBeans Model Import
POLL : JavaBean Model Importer
JavaBean-Model
Invalid Class - Javabean not available for import
WebDynpro Using JavaBean Model ->Please Help
Best regards, Maksim Rashchynski.

Support for xs:date types in web services generated from EJB components

I need to generate a Web Service from an EJB session bean based upon EJB entities generated from the Oracle 11g database that contain DATE type columns.
JDeveloper creates java.sql.Timestamp types in the EJB Session bean and this results in an exception error when I try to generate a web service from this bean via webservice annotations:
java.security.PrivilegedActionException: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 1 counts of IllegalAnnotationExceptions
java.sql.Timestamp does not have a no-arg default constructor
I expected the web service wizard to generate argument types xs:dateTime or xs:date so this was an unwelcomed surprise.
I tried manually adding a method to the session bean with java.util.date arguments and had no problems with the web service wizard that correctly created xs:dateTime arguments. Is there any particular reason why the EJB wizard does not generate java.util.date arguments or handle java.sql.Timestamp without failing with an exception?
Since I begin with database tables and generate EJB entity classes and then web services with the Jdeveloper wizards it seems to me that there is a problem here in JDeveloper. Would you agree?
There are several possible more or less appealing workarounds, such as doing manually adding methods to the EJB facade with java.util.date arguments and doing the conversion from/to java.sql.timestamp manually. Is this a reasonable approach or does JDeveloper support date/time for Date columns in some other way that I have missed?
Very Grateful for any comments or suggestions.
Edited by: user10601664 on May 2, 2009 1:14 PM
Edited by: user10601664 on May 2, 2009 1:43 PM

Checkout this example:
http://www.manojc.com/?sample3
public class HelloWorldService{
* @wlws:exclude
public void dontExpose(){
Regards,
-manoj
http://manojc.com
"Jacob Anderson" <[email protected]> wrote in message
news:4036581e$[email protected]..
>
hello,
I created the descriptor file for a web service that had a protectedmethod in
it and noticed the protected method showed up in the descriptor file!Should
the "source2wsdd" task only output PUBLIC methods as service actions? Isthere
any way to specify methods to be 'ignored' when generating the webservices descriptor
file?
here was the generated descriptor XML:
<web-service name="BindingService"
protocol="https"
style="document"
targetNamespace="http://www.foo.com/ws/BindingService/"
portName="BindingServicePort"
uri="/BindingService"
portTypeName="BindingServicePort">
<types>
</types>
<wsdd:type-mappingxmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsdd="http://www.bea.com/servers/wls70">
<wsdd:type-mapping-entrydeserializer="weblogic.xml.schema.binding.internal.builtin.DocumentCodec"
type="xsd:anyType"
class-name="org.w3c.dom.Document"
serializer="weblogic.xml.schema.binding.internal.builtin.DocumentCodec">
</wsdd:type-mapping-entry>
</wsdd:type-mapping>
<components>
<java-class name="BindingService"
class-name="com.arrow.ws.vendor.BindingService">
</java-class>
</components>
<operations>
<operation name="getConfigName"
component="BindingService"
method="getConfigName()">
<params>
<return-param xmlns:typeNS="http://www.w3.org/2001/XMLSchema"
location="body"
type="typeNS:string"
name="result"
class-name="java.lang.String">
</return-param>
</params>
</operation>
</operations>
</web-service>

Complex data type to application service create method(CRUD)(Urgent)

Similar Messages

Maybe you are looking for