Complex Duty Rates

Hello,
Can anyone give some direction on how to correctly upload Complex Customs Duty Rates (i.e. those of type B00X in the XML file) from the data provider (i.e. Customs Info)? There does not seem to be any mapping that exists for B00X in GTS config, yet the config guide indicates that you can now upload and calculate Complex duty rates in GTS.
When I try to upload these rates, I get a warning message in the log that says for example:
0207129000: will not be uploaded for country BR (( duty_rate_type B00X ))
The info I have found on OSS says: "Your data provider delivers the complex customs duty rates with a computation code in the XML file for customs duty rates. You can enter the computation codes as customs duty rates also manually. You must assign this computation code to the calculation type and the calculation base of SAP GTS." However I do not see where these complex rates are loaded....
Any suggestions would be much appreciated.
Thanks!

Hi,
Have you assigned the external duty rates to the internal ones?
and have you maintainded the calculation rules in your customizing?
IMG
-SAP Global Trade Services
--SAP Customs Management
---"Customs Processing" Service
Calculation of Customs Duty
----->Define Customs Duty Framework
----->Define External Customs Duty Rate Types for Data Upload
regards,
Ralf

Similar Messages

IS Oil TDB excise duty rates

Hi,
We give users the responsibility of maintaining the TDP excise duty rates. hence, they are authorized to use transaction O4K5.
There's another table to maintain region based ED rates which we want users to maintain and this can be found in : IS Oil -> TDP -> Excise duty rates -> Define region based external rates. Can you please advise the transaction code for this menu?
Thanks!

Hi Zenon,
There is no direct transaction for this. But we can use Transaction :SM30 , give the view name "V_OIH01A" and click on Maintain. I hope this helped you.
Regards,
Ashok

Excise duty rates are not displayed in J1IEX

Dear friends,
Excise duty rates (BED, ECS, SECESS) are not displayed in item level in excise invoice J1IEX, But excise values are updated correctly. I have maintained duty rates in J1ID. Kindly give your valuable inputs.
Thanks and Regards
ETR.

Hi Maladri,
Thanks for your reply.
I have maintained my condition types BED, ECS, SEcess in respective fieslds of BED Condition, ECS condition, SEcess condition already, eventhough the % not updated in J1IEX Excise invoices.
But it has updated 10 days before all values came properly in J1IEX.
Can you explain which condition type we have to maintain in BED %, ECS%, SEcess % in Maintain excise defaults, I didnt maintain any condition types there. If it is the reason then how it updated correctly 10 days before?
Kindly guide me
Thanks and Regards
ETR

Incorrect Duty Rates in ARE3 for Multiple Line Items

Hi All
I have a scenario where 1 ARE3 Form is generated referring to 2 Excise Invoices (Both the Invoices have the same Material, Excise Chapter Heading, Tariff Rates, Ship-to-Party; only Quantities are different)
The issue until now was that in the 'Duty Values' Tab, the SE Cess of the 1st Line Item was getting copied into the SECess of the 2nd Line Item. Eg: If 3000, 60,30 and 4000,80,40 are the BED, ECS and SECess amounts, the SECess amount of 30 was getting displayed in the 2nd Line Item instead of 40.
This has since been rectified by applying OSS Note: 1046595 and the correct amounts are getting displayed. However, I have another issue: In the 'Duty Rates' Tab, the Excise Rates for BED, ECS and SECess for the 1st Line Item (1st Excise Invoice) are showing correctly, while 0 is getting displayed for the 2nd Line Item. This results in the ARE3 Form Printout displaying 0 as the Duty Rates for the 2nd Excise Invoice.
Would appreciate if anyone has come across such a scenario and how this was addressed
Regards
Ramana ND

Hi Murali
Both the OSS Notes have been applied. My question was on the Duty Rates not appearing in the Duty Rates tab and not the BED, ECess or SECess amounts on the Duty values tab. The amounts are coming out just fine.
Regards
Ramana ND

Excise Duty rate updation in order

Dear all,
I have recently changed the Excise Duty rate in J1ID.
Now I want to update the ED rate in the orders that were created before the ED change was done.
I tried the following ways but none of them was successful:
1- Update the prices on the condition tab
2- Changed the Billing date manually
3- Changed the Pricing date manually
The thing that worked was changing the Req. deliv. date to a date after the ED change was done. This automatically redetermines the billing date and the orders are updated.
But I am not clear on what the ED (JMOD..) rate in an order is dependant upon? Is there any other method of updating ED rate in an order?
Regards
Sapshed
Edited by: Sapshed on Dec 9, 2008 10:47 AM

The suggestion whatever I gave you was only after testing at my end. For me, the billing has taken the new excise duty value correctly. Of course, I have not predated the Actual GI Date. Since right now, I dont have access to SAP, please test a case without changing the Actual GI Date.
Alternatively, you can process via VF04, where there is a tab "Default Data". Select this tab and maintain the current date in the field "Date of services rendered" and execute. Post the outcome whether this suggestion has helped you.
thanks
G. Lakshmipathi

Excise Duty Rate change

While doing J1iex how do I change the Excise duty rate; I donot want to change the PO everytime.
I maintain the Exceptional Duty rate in J1id. Still that does not get effected in J1iex. It only takes the value from PO.

Yes; I maintain the Excise Tax Rate and also Exceptional Material Excise Rate. In J1iex it only shows in the specific rate under Duty rate whatever we maintain in the excise rate; I donot want to change in Excise Rate as it is maintained on Control code wise. If I maintain the Exceptional Material Excise Rate then the changes should get effected in J1iex. How to do that?
Regards,
Sudha

Duty Rate in J1iex for Imports

Hi friends ... expericing strange problem at my end ...
I am doing imports process ....I created a PO with two materials with same values of below 7 conditions types (import duties)
Basic , ECess on Basic , HSECSS on basic
CVD , ECESS on CVD , HESCESS on CVD and Additional custom duty.
I did seperate MIRO for custom duty for each line
While capturing J1iex , system is displaying CVD duty rate for 1 line item , but for another it is not showing (Blank)
Even for the line , in which CVD duty rate is not appearing , other 3 duty rates ( ECESS on CVD , HESCESS on CVD and Additional custom duty) are coming perfectly and the duty values are correct for all 4 cenvatable conditions in j1iex (even for CVD).
In excise Defaults , I have maintained conditions types for CVD , ECESS on CVD and Additional custom duty.( Believe for HSECESS on CVD , there is no need to maintain condition type in Excise defaults , it is system hard-coded).
Wondering , what material sepecific setting governs DISPLAYING of CVD duty rate.
I did check J1ID for both material , but that is almost same.
Awaiting for your reply.
Regards
Shrey

As I mentioned, I did seperate MIRO for both line items and also capturing them in different excise invoice .....
The duty value is perfectly coming for BED (CVD part) but Duty percentage/Rate is not appearing ( it;s blank) for 1 line item.
The only difference in two line items is MATERIAL .....
Rest everything is fine in both line
Regards
Shrey

Excise Duty rate change in J1iex

Hi,
I am maintaining exceptional duty rate in J1id. While posting the j1iex, the rate is only taking from the Purchase Order and not from J1id. How to solve this.? . Every time we are changing the PO FV 11 conditions and posting J1iex.Please help
Regards,
Sudha

HI,
Hope you are using TAXINN. You can mainatain the new tax code & create the PO with ref to new tax code.

Duty rate & duty values

Dear Experts,
After excise capturing and posting   while doing goods receipt for IMPORT PO, I am facing following problem,
IN J1IEX PART1 Entries
1.IN DUTY RATE TAB   all the entries like BED, AED, SED are zero,
2. IN DUTY VALUES TAB all entries are zero
While doing MIGO System is capturing excise values but it is not updating in to PART1 TAB,   System throwing message "   BED, AED, SED for the Excise item is zero" Please suggest
With regards,
ARABBAS

Hi,
Check the follwing points are maintained or not
maintain the following conditions in excise default settings.
JCV1, JECV, JADC
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
along with ur taxprocedure maintain these conditons in the specified fields
JCV1 in CVD condition field.
JECV in ECS conditon field.
JADC in ACD conditon field.
in case of secess on CVD, no need to maintain.
it is hardcodded in the standard
Vendor in GR 2 (Entry always possible)
Import scenario
1.Create material master of import goods.
2.Create vendor master record of import vendor and Customs clearing vendor.
3.Maintain CIN settings.
4.Maintain J1id.
5.Maintain Pricing procedure SAP standard JIMPOR..,maintain required conditions..JCDB,JCV1...
6.Assign the schema to respective import vendor in Purchasing view of VMR.
7.Create import PO ,check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned..This can be done by In condition tab select condtion then click on display,then enter.
Save the PO.
8.MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
9.Capture Excisse invoice--j1iex.
10.MIGO.
12.Post Excise Invoice.
13.MIRO...Payment to vendor(import vendor)
Regards
Pramod

Excise Duty rate problem

Hi all
here is problem in excise duty rate miantanance in JIID. our are purchasing material from the same vendor with different excise duty rates (for Ex: one is 16% and other 12%) in the same plant. can any body suggest how to maintain different rates for the same vendor in J1ID.
regards
Siva

Hi,
Please try to maintain in J1ID as
Exceptional Material Excise Rate
Hope this may solve your problem.
Regards,
Kiran S Neve

J1iex duty rate tab calculate excise base rate check box is disable in impo

Hi,
We have done Import PO and wrt we have done the GRN as part 1 and we try to complete the part 2 as J1iex, but in j1iex duty rate tab calculate excise base rate check box is disable, we required is activate.
its working in domestic scenario.
Thanks
shital

Go to J1IEX- Change (Instead of Post). Try & change the rate.
But why do you want to change it in J1IEX? as duties are flowing from PO-MIRO.

Calculate Excise amount as per duty rates check box in J1IEX

Hi,
              In J1IEX Duty rates tab, there is one check box as Calculate excise duty base on duty rates , but thta check box is Disable i How to make it as enable so that we can click to to recalculate the excise rate,
also my problem is that in case of import PO, the basic price in our PO is diffrent compare to basic price of custom . because custom is addding the basic frieght and insurance charges in Basic price, so while Doing J1IEX ref. to MIRO number it is taking properly amount of all excise duties but excise base amount is diffrent and when we correct the excise base amount as per custom Bill of entry all excise amount are change and it is not coming as per duty rates which are present i Duty rates tab so I want to recalculate it.
regards,
zafar

Hi ,
             As per detail which I have mention in my question, the process which we are following is after recieving import Material   first we are doing   MIRO for custom delivery cost   and there we are entering tax amount as per custom bill of entry,   and we are getting the MIRO Documnet number    after that we are Doing    Capture Excise invoice thorugh J1IEX and ref. document we are selecting as PO, after pressing enter we get a small pop up window as customs invocie number and year there we are entering the MIRO document number and Year   then ref. to that miro number All duty and duty rates are coming as per MIRO   but Excise base amount is different because it is coming from PO basic amount and there is diffrence between Custom excise base amount and PO bae amount becasue in custom bae amount they are adding frieght basic amount into excise base amount , and then we have to correct amnually exsice base amount in J1IEX   for all materials, is this proceess is same in all or we need to do some modification in pricing procedure or at any other place .
          At bottom in excsie duty tab in J1IEX there is one check box as Calculates excise amount base on excise duty but that check box is also disable   How to make that enable.
I also have found one FM : J_1IEX_DEFAULT_EXCISE_DUTY,   by doing some changes in this FM we can get what we requied , is there any other solution to get our requirement.
regards,
   zafar
Edited by: zafar_karnalkar on May 15, 2010 1:47 PM

Upload of Customs Duty Rates (xml file) without transport request creation

Hi All
Can we upload the Customs Duty Rates (xml file) without transport request directly in the system.
Thanks & Best Regards
Kiran

Hi Kiran,
Please check transaction & program /SAPSLL/TLC_CUSB_UPL in GTS.
This allows you to upload the XML from a local source or an application server path.
I do not think a transport request is required in this scenario.
Best Regards,
Eoin

Duty Rate determination Issue

Hi Experts,
We are in the process of implementing Customs Management for US, Canada and Mexico. I am having an issue when a duty rate is determined for canadian imports. Even though I use the same/similar country group settings for US, CA and MX, when I try to create a import customs document, when I try to determine the duty, I am getting pop up window, giving me an option to select a specific duty rate based on the country group. From the log I understand that system is not able to determine the duty rate due to several country groups are determined.
I tried to reconfig for automatic determination, but not able to resolve it. Can you guys please help me to understand what are the config steps and how the country groups work, and how to address this issue.
Thanks a lot in advance
Vijay,

Hi,
Here are my findings.
1. Analyzed the dataprovider file, and found that the B0004 duty category (preferential duty) was defined for many different country groups, especialy for Canada. For ex, imports from Mexico into CA, there are many preferential agreements between those two countries, so MX is part of more than one country group. Further I understood we cant modify this file everytime.
2. I defined a legal regulation for CA customs processing, uploaded the HTS XML file and duty rate XML files, when I checked, all the defined country groups are added and activated for the legal regulation. Due to this, when an import happens from MX, system finds more than one country group and was not able to determine one duty rate for B0004 category.
3. I manually removed the unwanted country groups(kept only what is relevant for my client's business scenarios), then system determined the duty correctly and it works fine. But all the country groups are reassigned to legal regulation when I reload the duty rate files into the system.
So I am wondering, is it a standard practice or is it advisable to repeat the step 3 whenever a new duty rate files are loaded into the system. Is there any other steps I am missing.
Thanks a lot in advance.
Vijay.

Preference Duty rates

Hi,
We have to upload the preference duty rates specific to NAFTA,ALADI, EUR manually.
Please let me know where exactly in the GTS system we maintain these duty rates.
Regards
Nag

Hi Nag,
Assuming that you are using GTS 10, you maintain the Duty Rates in the Customs Management > Classification area.
Choose tab "Classification Master Data", and find "Maintain Customs Duty Rates" at the right-hand side of the screen.
It's most efficient to maintain the rates at Country Group level - of course you need to have set up suitable Country Groups containing the relevant countries - and you will use Duty Type 'B200'.
In the data record, your choice for the "Type of Pref. Doc." will depend on how you have set up the Code List entries for Preference Certificates.
Hope that helps.
Regards,
Dave

Complex Duty Rates

Similar Messages

Maybe you are looking for