Complex join goes missing during import

morning,
i got a complex join between 2 dimension tables (in physical layer: one table is alias of existing dimension table; other is geo hir table) which goes missing when i try to import the new SA into the existing repository (the join is in the new SA)
there are 3 other complex joins (remaining geo hir tables that also join on alias table) which theoretically are identical and which dont go missing; i see no difference between any of them
id appreciate any suggestions what i could check to prevent this from happening
Edited by: UserMB on Apr 14, 2009 1:57 AM

yes, i know its not supported
during import the catalog is select for sure plus the security group
i tried the merge too (following the instructions for merge with blank rep), but then it creates a second database connection instead of merging into existing one as though it would not recognize that its the same one

Similar Messages

Font 'boldness' goes missing during bursting

I have incorporated our corporate branding font into a report. Some lines are normal, a few select are bold. I have created Fonts and Font Mappiong sets in XML PUb Administrator, and added the font info to the xdo.cfg file. I have set the FO Processing attribute for my Template to point to the Font Mapping Set.
When i run my report as a COncurrent PRogram, all is well. Branding font and bold attribute display correctly. When i burst this report, the branding font is there, but all my bolded lines display as normal.
What am i missing?

I turned debug on and see this in the log file during the Burst job:
[063011_025348427][oracle.apps.xdo.common.font.FontFactory$FontDef][STATEMENT] Type1 font created: Helvetica
[063011_025348457][oracle.apps.xdo.common.font.FontFactory$FontDef][STATEMENT] TrueType font created: /app/erp7/applmgr/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/fonts/ALBANWTJ.ttf(0)
[063011_025348670][oracle.apps.xdo.common.font.FontFactory$FontDef][ERROR] Failed to open TrueType font: /app/erp7/applmgr/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/fonts/CAMBRIAB.TTC(0)
[063011_025348678][oracle.apps.xdo.common.font.FontFactory$FontDef][STATEMENT] TrueType font created: /app/erp7/applmgr/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/fonts/CAMBRIA.TTC(0)
[063011_025348753][oracle.apps.xdo.common.font.FontFactory$FontDef][ERROR] Failed to open TrueType font: /app/erp7/applmgr/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/fonts/CAMBRIAB.TTC(0)
So it's for some reason not able to open the font file, but i do not understand why.

HT5085 I really hate downloading a audio boMoth: The Moth Saga, Book 1 (Unabridged) Part 1 6:50:06 Daniel Arenson ok $32.95 and the second part goes missing while processing and i cant recover it!!!!!!Arghhhhh rip off

What do you do when you down load a $32 dollar audio book and part 2 goes missing during the processing stage and i cant find it anywhere?

If it's not in the Music app on your phone, and you can't find it via the phone's spotlight search screen, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Missing apply during import panel in lightroom 4

Missing apply during import panel in lightroom 4.

On the danger of stating the obvious: Right-click means clicking with the right (as opposed to left) button of your mouse.
Click here (see screen shot):

Missing import selection tabs during import

i'm missing some import selection tabs during import. seemed to dissapear and I can't get them back.....like "file handling"
dt56

Try R-clicking on any of the other headings of subpanels, like 'File Renaming' and then selecting the missing subpanels.
Tony Jay

Error importing SharePoint site collection - "there is an error during importing the Roles tag"

Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks.

Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks.

"An Error Occurred During Import"

I am importing video from a Canon Vixia HF10 HD CMOS camcorder into iMovie 08. After the thumbnails are created, I select the clips I want and click on Import. I tried in a a Large (960x540) and Full (1920x1080) format and receive the same error message - "An Error Occurred During Import." I am then instructed to check the footage carefully and try again.
What could be causing this error?

I had exactly the same problem in loading files from by HF10 onto my iMac but I didn't have the same problem on my Macbook. So I tried to copy the clips from my Macbook onto the iMac but imovie on the iMac wouldn't recognise them ...
This suggested to me that the problem was with the Imac's version of imovie being unable to read the file types from the HF10.
I had, in parallel, been trying to fix an error shown when iMovie on the imac starts up :
"The QuickTime components necessary to view, edit, import, and export several kinds of movies are not installed. These components are included with the iMovie installer; please re-install"
The discussion and solution to this problem can be found under the "Missing QuickTime Components" discussion on this site however to save you time I have copied below fgalvani70's solution (Bravo !) which works perfectly ... both the missing component issue and the import issue are now perfectly resolved !!
1 - install software Pacifist (http://www.charlessoft.com/) (it's shareware but you can use without problems)
2 - Insert Original Apple installation disk
iMovie '08 missed a Quicktime Component called: “AppleIntermediateCodec.component”. This component is necessary for importing movies in iMovie 08.
So, just let Pacifist read the Install DVD and extract only the ‘AppleIntermediateCodec.component’ to the default directory.
It's under Contents of BundledSoftware.mpkg -> Contents of AppleIntermediateCodec.pkg -> Library -> QuickTime
Select AppleIntermediateCodec.component and click Install

Variable not set (error 91)/Error during import (error 102)/execut bat file

We are on BO 11.5.0.0 and using the COM SDK with Visual Basic to run multiple reports (sometimes multiple flavors of the same report) through a bat file.
If we run the reports single-threaded through the bat file, the reports run fine. However, if multiple versions of the bat file start at approximately the same time, we get one of two errors:
91 Object variable or With block variable not set
102 Error during import document -
Here's the part of the code with the problem:
Dim BOapp As busobj.Application
Dim receiveDoc As busobj.Document
Set BOapp = New busobj.Application
BOapp.Interactive = False
BOapp.Logon strUser, strPass, strFromSystem, "Enterprise", False, False
BOapp.Visible = False
Set receiveDoc = BOapp.Documents.OpenFromEnterprise(strFromRep, strFromFolder, boFolder)
receiveDoc.SaveAs (strDocumentPath & strFromRep & ".REP")
Values for the following variables are passed in from the bat file:
strUser
strPass
strFromSystem
strFromRep
strFromFolder
strDocumentPath
If it fails on the OpenFromEnterprise statement, we get the 102 error.
If it fails on the SaveAs statement, we get the 91 error.
Running it through debug hasn't helped, since we are running only one report.
Any thoughts on what could be going wrong?
Thanks in advance

I have tried this running the VB code on my desktop (outside of the bat file) and nothing out of the ordinary occurs. The VB code runs fine with only one occurrence.
I had seen on other posts "ThisDocument" and didn't know if it would be applicable in this situation. I also wasn't sure how it should be used based on the rest of my code. Would "ThisDocument" make a difference?
Thanks again

Customisation during Import failed due to com.bea.wli.sb.transports.ejb.Jws

Hi All,
*Environment:
Weblogic Server: 10.0.1.0
Workshop Studiio: 1.1.0.0
Aqualogic Service Bus: 3.0.0.0.0
Linux: 2.6.18-53.e15 x86_64
ANT: org.apache.ant_1.6.5
JDK: jdk150_11
All my services are JMS based, so all the JMS destinations has already been created and tested using a different utlity written in java which sends a messages to the jms queues and recieve those messges, so i am sure my jms destinations are already there.
*Problem:
1 - I can use alsb console to import the config.jar without any problem, even though the jms destinations are reflecting older addresses i.e. jms:localhost:7001/connfact/queue (my dev)environment, where as my to be environment is different physical host with address like jms://abdhost:7099/connfact/queue.
2 - When i try to apply customisation using a customisation file i generated from my dev environment and changes the jms locations according to the to be host. the customisation operation failed complaining about 'Failed to lookup connection factory <factory name>'.
in the weblogic console the error is
[JAM] Warning: failed to resolve class com.bea.wli.sb.transports.ejb.Jws
<ERROR> <ConfigFwk> <BEA-390109> <Failed to notify session listener com.bea.wli.sb.transports.WLSArtifactDeployerImpl for operation beforeSessionActivate on session weblogic
com.bea.wli.sb.transports.TransportException: Failed to lookup connection factory <factory name>
*Same Problem using ANT on hudson:
I am also running same process using ANT build script on hudson to kick off build which imports alsb configuration, using already created config.jar, into alsb 3.0.0.0 already running on linux. The ANT script runs WLST import.py and export.py script, copied from the weblogic tutorial, to import configuration into alsb 3.0.0.0, but failed with same error.
I am not sure if this error is only related to missing jar which is missed during weblogic startup and in my ant script. If so, can someone tell which jar to use unless its a BUG and already been addressed as this is pretty old version i am using.
PS: dev and tobe environments have same weblogic build so i had already checked that.
Many thanks for your help!
sal

Hi,
Is there any update on the above issue?
we are also facing the same issue. please provide solution if you have something.
Regards,
Bhaskar.

Why can't i login with the account i just created???? I am missing an important session!!!!

why can't i login with the account i just created???? I am missing an important session!!!!

Hello ljp1,
What browser are you using to log in to your brother account? It could be a problem with some settings within your browser that is giving you grief.
Try going through these troubleshooting steps to see if it helps resolve the issue.
http://goo.gl/TTH2s
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

OBIEE 11g - complex join in physical layer

Hi, I need to create a complex join in the physical layer with join criteria like the following:
fact.fiscal_year = dim.fiscal_year and fact.accounting_period <= dim.accounting_period
Every time I try to do this, I get the nQSError: 37005 Transaction Update Failed message. Any ideas what is going on?
Thanks,
Scott

Actually, I (finally) got it to work - wow logical joins are a big pain in the butt in 11g. First off, I had to edit the RPD offline, couldn't get it to work (at all) online.
Next I had to delete the existing joins...there appears to be no way to change an existing FK join into a logical join.
Next created the logical joins as stated in my original post - but had to fiddle with it for about 15 minutes to get it to work. You can NOT click the two columns on the dim side, two columns on the fact side, and then just edit the default formula (which defaults to have = sign between the expressions) - because it creates a FK join, and then you start getting errors. Instead, I had to build the expression from scratch.
All in all, 11g has gotten much less flexible and easy to use in this regard.
Scott

Preserve the sorting of a hierarchy during import to MDM

Hi experts
I have imported a hierarchy from a legacy publishing system
The file is XML and itu2019s close to perfect except for one very important thing
The hierarch is sorted manually in the legacy system and not by any number or letters
This sorting has to be preserved throughout the entire migration
I know itu2019s possible to sort the hierarchy by hand in MDM by inserting a category as sibling.
This is what I need to avoid for potentially over 300.000 categories in all in many hierarchies.
Using the "create hierarchy filed" in the import manager, should display 4 fields instead of only 3
The last filed should be used to sort the hierarchy during import.
Iu2019m able to get a running number from the legacy to control the sorting of the categories.
Hope you have a solution.
Please do not tell me that I just have to live with one more missing function in MDM.

Hi again
Nobody had the same problem as me?

Workflow problem during import of record

Hi,
We get the following error message during import of a record using import manager:
4868 2008/05/05 15:12:44.861 Error: RC: 0x80000002
4868 2008/05/05 15:12:44.861 Error: Failed to GetJoinCheckOutRights. [Owner: WF Owner; Job Id: 10165]
Currently we run MDM 5.5 SP6 Patch 2. This worked fine before we applied patch 2.
The record is getting checked out in the start step. If I don't check out the record it's working fine.
Any ideas?
BR
Michael

Hi Michel,
In the start step of Workflow there is an option as check out records(yes,no). select yes, when record will enter into the workflow it will get check out and no user will be able to modify that record throughout the workflow cycle.I you want that the record shoukd be modyfied at some step during workflow then you have to give rights (Join CheckOut )to the user of that Particular step.For That login with the user which is the Owner of the workflow now rightclick onthe record or records and check in\out->Modify Join Permissions->either add a user or a role.This will allow that added user to Join check out and modify the Record(right clik on record ->join check out).Then that User will be able to modify the records.
Reward if Helpfull.
With Regards,
Vinay Yadav

Backup during import vs vaults

Hi new to mac and aperture and curious to find out the best practice for storing, backup and restore of photos. Previously I would have stored my pics in folders and used a sync program to mirror them to a network drive but aperture prefers to have files imported into its iscsi like container and manage it all from one place. This has presented a few issues for me,
1. I can no longer see my backup of pics from a media or windows device on the network, so my get around will have to be to export folders periodically as a separate archive on the network.
2. Space is not a premium but I fear the aperture library creates a backup during import to a folder called aperture which I guess is the library itself. Now I am no expert but a backup inside a production library does not make much sense
3. Vaults synced to a network drive seems the most practical solution but again vaults store the pics in the folder names. This is a problem for me as I catalogue my projects by year and my albums by events during the year. If I open the vault all my albums are showing but in one big group.
4. Finding this all very confusing with a lot of conflicting info all over the web, maybe someone can advise and give me a clear picture once and for all on how all the backup options should work together both for backup and for restore and possibly for sharing over the network from all types of computer.
Tar!

You can use Aperture with remotely stored images rather than importing the originals. This is known as working with referenced images. This is probably going to be slower to use depending on your network speed and external drive types. But this method may better satisfy your archiving and accessibility needs requirements.
You can create multiple Libraries such as one for each year. Aperture can split and merge libraries now.
There are several recent posts (essays should I say) from great experts on this forum where solid advice and best practice is described regarding the kind of system you want to employ.
AW.

RE: Complex Join

Hi Experts,
I have few questions regarding complex joins
1> First when we import the tables into the Physical layer we will do the FK Joins for the tables according to our requirement then in BMM layer we will create new business model next again why we have to make complex join in BMM layer already there is joins between the tables in physical layer which scenarios we have to make the Complex join if we won't do the complex join what will happens.
2> Also if we do FK join in the place of complex join in BMM layer what will be the result.
Thanks in Advance,

Hi,
we have two joins in OBIEE one is foreign key join and other one is complex join.Mostly 99% cases we use foreign key join in physical layer.we use complex join in phycical layer mostly in three scenarios.
1)when there is extended join conditions.
2)when we join key column of one table to non key column of other table.
3)when the operator is other than equal to operator.
In these 3 situations we can use complex join in physical layer.
Next one is we have already joins in physical layer then what is the need to create complex joins in BMM layer right.
The answer for this question is whenever user runs a report that will generate logical sql query our OBIEE understands only logical sql query this logical sql query generated based on the logical joins in BMM layer.
Based on this logical joins only it will create most optimized sql query.And another reasons for creating logical joins is
if we want to specify driving table it is possible only thriugh complex join in BMM layer.
and if we want to specify type of join it is possible only thriugh complex join in BMM layer
and if we want to specify cordinality it is possible only thriugh complex join in BMM layer
and another one is my tool is not able to identify facts and dimensions because it has no intelligence,we need to incorporate the intelligence by giving logical joins only it identifies the facts and dimensions.
so we have to create logical joins in BMM Layer..
Give me Like,,if you aresatisified with my post.
Thanks,
Sai Pelluri

Complex join goes missing during import

Similar Messages

Maybe you are looking for