Complex Po Import -Error while loading the data

Hi all,
I m trying to upload complex PO through Standard interface Program and I am getting the below error ,all the setups are fine.
Kindly guide me to resolve this is issue as this is very critical for us.
Error: Style (STYLE_ID = 201) with progress payments is not supported.
Is it possible to load Complex PO thru' backend ?

958542 wrote:
Hi all,
I m trying to upload complex PO through Standard interface Program and I am getting the below error ,all the setups are fine.
Kindly guide me to resolve this is issue as this is very critical for us.
Error: Style (STYLE_ID = 201) with progress payments is not supported.
Is it possible to load Complex PO thru' backend ?Please see these if these bugs/docs help.
Bug 10237284 : PROVIDE USER'S GUIDE FOR PURCHASING OPEN INTERFACES
Release 12 Oracle Purchasing API and Open Interface Changes [ID 437587.1]
Thanks,
Hussein

Similar Messages

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while loading the data from text file

Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

Records was deleted at R/3 sys - getting error while loading the data

Hi All,
we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
we have replicate the DataSource and activate Trans rules but no use still getting the same error.
when we execute the data source 2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
Could you kindly suggest me any one how to rectify this error.
Thanks in Advance,
Shaliny. M

hai Lilly
I activated myself source system and replicate the my datasource .
Then activate the update rules for ODS , InfoCube and InfoCube .
Then i tried to load the data into InfoCube from ODs .
Again im getting same problem .
why it is like that
pls tell me
rizwan

TSV_TNEW_PAGE_ALLOC_FAILED error while loading the DATA using DTP

Hi,
While loading the data using DTP for 2 DSO's we are gettig the error
TSV_TNEW_PAGE_ALLOC_FAILED
can any one kindly help me out regarding the same.
Thank You,
Poornima.

Hi Soundarya,
Thanks a lot for the reply. But i found that its running fine in development, where as coming to quality its throwing an error. These happened for Two DSO's. In both the transformations i have identified that the Transformation names are different from Development and Quality..
There are no routines written for them and no select statements have been used
Can you please suggest me regarding the same.
Edited by: Poornima Gayatri on Mar 22, 2010 7:00 AM

Error while loading the data from excel to database.

Hi,
I am using PL/SQL developer to load the data from excel to database. I will set the data source in the control panel and will proceed through ODBC importer in pl/sql developer to import the data.
What exactly the error is when i click the filename to view the result preview it shows an error as:
The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data.
Kindly help with solution.
Thanks/Regards
Sakthivarman J.

Hello;
That error message comes from Microsoft, so something in you Excel sheet is the cause.
Its a pain but I would check properties of each column in case Excel decided to add something, a comma for example.
Do you have a column over 255 characters? Look there first. If any length is greater than 255 it will crash and burn.
Or convert it to a CSV and create an external table.
Best Regards
mseberg
Might also throw an 3163 as an error where you cannot see it.
Edited by: mseberg on Sep 9, 2011 7:34 AM

Error While loading the data into PSA

Hi Experts,
       I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
"Check Load from InfoSource
Created       YOKYY on   20.02.2008   12:44:33
Check Load from InfoSource , Packet IP_DS_C11
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Pls help me in this......
With Regards,
Yokesh.

Hi,
After editing the file did you save the file and close it.
This error may come if your file was open at the time of request.
Also did you check the file path settings.
If everything is correct try saving the infopackage once and loading again.
Thanks,
JituK

Error while loading the data

Hi,
We are trying to copy data from one cube to another(it's exact copy). There are more than 11 million records so we have used calendar month as filter and divided the data in to many parts.
While loading the first request to the target cube, it failed resulting in a short dump. I checked in ST22 and it showed "Runtime Errors DBIF_RSQL_SQL_ERROR , Exception CX_SY_OPEN_SQL_DB" and I also found a message "ORA-00060: deadlock detected while waiting for resource" in the description of the Short Dump.
I found many threads here relevant to this exact issue but the only solution that I could find is to include a delete index and create index process in the chain before and after the data load process to the target cube. In our case, the target cube has no data and this would be the first request to the cube so there is no need to delete index in the first place but still the data load is failing.
For each load there are 50 data packages and 50k records for each packages. Only one or two packages have failed. Is there any way to recover only these two separatly instead of deleting the whole request and repeating the process.
If you have encountered a similar issue or if you have any suggestions, Please do help.
Thanks..

Hi,
Can you see which data packages have RED status? Click on the live of the RED data package, and you have to find an ICON with update manually, or go to MENU -> REQUEST -> POST MANUALLY.
if you are lucky, it helps. Do not forget that this runs in DIALOG process, so don't leave BREAK.POINT in your transformation.
If you need any help, please let me know.
(The DEADLOCK problem: change the DTP BATCH setting, because it has problem with paralel loading, and there os a database deadlock. I suggest you to load in one process so: open DTP. after it, go to GOTO menu -> SETTINGS FOR BATCH MANAGER -> NUMBER OF PROCESSES, overwrite with 1. With that, deadlock may not occur.)
Regards,
Laszlo

Error while loading the data in DSO (Bi 7.0)

Hi Friends,
I am working on BI 7.0 , I had run a DTP to load the data in DSO from another DSO.but there was some error in tranformation because of which DTP request didnt terminate with either green or red . then I fixed the bug in TRX and rerun the request .Now there are two requests. Now i deliberately changed the QM Light of the earlier request to Red so that I could run another request. The other DTP success fully loaded the data in Activation Que of DSO . But when I tried to Activate the second request I got a message that request can not be activated because earlier request is yet to be activated.
now I tried to delete the earlier request .Neither its getting deleted nor am I able to change the QM Light to Green .
What should I do to activate the Successful request to load the data in DSO.
puzzeled !
Anurag

Hi,
I have a similar situation....
I load data from DSO 1 to DSO2....i run the DTP and look at the monitor after its green when i go to manage and activate i am seeing two requests instead of 1...i am not sure why...Can you guys tell me if there is any setting that needs to be taken care of.
Thanks,
Vinay.

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

Error While loading the data with OLIBW7

Hi Guys,
while we are loading the set up tables we are getting the following error in OLIBW7 transaction "Error determining rate: foreign curr. MYR local curr. PHP date 23.02.2007"
I asked around the functional consultants and they informed that Currency Exchange Rate is not being loaded to D53 at all.
Can any one let me know how to fix this problem....
Thanks in advance

Hi
did you get the solution for the issue you got while doing the setup for Sales orders.
"Error determining rate: foreign curr. MYR local curr. PHP date 23.02.2007"
thanks in advance,
Bhaskar.

Error while load the data from CSV with CTL file..?

Hi TOM,
When i try to load data from CSV file to this table,
CTL File content:
load data
into table XXXX append
     Y_aca position char (3),
     x_date position date 'yyyy/mm/dd'
NULLIF (x_date = ' '),
X_aca position (* + 3) char (6)
"case when :Y_aca = 'ABCDDD' and :XM_dt is null then
decode(:X_aca,'AB','BA','CD',
'DC','EF','FE','GH','HG',:X_aca)
else :X_aca
end as X_aca",
Z_cdd position char (2),
     XM_dt position date 'yyyy/mm/dd'
NULLIF XM_dt = ' ',
When I try the above CTL file; geting the following error..
SQL*Loader-281: Warning: ROWS parameter ignored in parallel mode.
SQL*Loader-951: Error calling once/load initialization
ORA-02373: Error parsing insert statement for table "XYZ"."XXXX".
ORA-00917: missing comma

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

Update Rule error while loading the data

Hello All,
I tried to do the init load for the datasource 2LIS_02_VAKON (Sales Document Condition), But it error's out in the Update rule saying:
Short text: Error when generating the update program
Long Text: Diagnosis
     An error occurred during program generation for InfoSource 2LIS_11_VAKON
     and InfoProvider 0SD_C15 . This may be extrapolated to incorrect update
     rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
The update rule looks very fine. I even deleted it and re created, but no success..... Please give me your thoughts abt it..... Any suggestions will be great for me.....

Hello Gokul,
I could'nt see any analyse button in RSMON. This is the only error message I could get from the Process monitor:
Short text: Error when generating the update program
Long Text: Diagnosis
An error occurred during program generation for InfoSource 2LIS_11_VAKON
and InfoProvider 0SD_C15 . This may be extrapolated to incorrect update
rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
Do you expect something else ? Also I went through your OSS note, they are asking to apply support pack 18. Is this a serious issue to apply SP? Because in Quality and Prod it loads fine......
Please let me know your idea

Error while loading the data into the cube using DTP.

No SID found for the value'UL' of characterstics 0BASE_UOM.
Please give me the idea ,to solve the error.
Thanks&Regards
Syam Prasad Dasari

https://forums.sdn.sap.com/click.jspa?searchID=23985990&messageID=6733764
https://forums.sdn.sap.com/click.jspa?searchID=23985990&messageID=5062570

Error while loading the planning book

Hi There,
I am getitng the below error while loading the data in planning book
"Error for COM routine using application program (return code 40,016)
Error reading data - Planning book cannot be processed further"
Ran /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
Could you please advise?
Thanks,
Krishna

Hi Krishna,
Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
Regards
JB

Complex Po Import -Error while loading the data

Similar Messages

Maybe you are looking for