Complex XML to Plain in JMS adapter "Content conversion module"

Hi!
I have read the document on "How To use the content conversion module with XI3.0 J2EE JMS Adapter", and it says only SimpleXML can be converted in the receiver channel.
I had hoped for a solution at least as good as in the File/ftp adapter, where complex XML can be transformed to files.
Are there plans to include complex XML conversion in the JMS adapter?
I can not use the file adapter as I need to change the file name and destination, and that can not be done by adding own module to its single module.
Any idea how I can achieve what I want?
To only way I can find, is to create a file using the file/ftp adapter, and then pick it up again and treat all the lines as the same structure (one row = one xml field). Then output this new xml message to file, using the JMS adapter and add any modules with name and destination determination.
Appreciate any help!
Regards,
Oeystein Emhjellen

Hello,
Have you tried to use an XSLT mapping within the IE?
I have, at one customer site, created a XSLT message mapping which converts the XML to a fixed length ASCII file format. I than added the XSLT message mapping as a second mapping step on the interface mapping.
In this case I was able to publish a fairly complex fixed length file format to MQ Series via the JMS adapter.
/Johan

Similar Messages

Receiver JMS Adapter Content Conversion issue

Scenario :
R/3 -->XI -->MQ(XML2Plain)
Hi
We are using Receiver JMS Adapter to send the Message from XI to MQ.
The XML has to be converted to plain file. And Content conversion is
being done.
With the new development, the message type defined consist of 8 fields
with fixed length. The XML message goes successfully from XI to MQ
without any content conversion. But once simple content conversion is
being done for Receiver JMS adapter, even though the message is
received but its empty (without any data records). The adapter
monitoring everything seems fine and it gives the status that message
converted to binary and the message is delivered to MQ. Though on
checking the messages there is no data records.
Below is my content conversion configuration done in Module tab. Kindly
revert back what can be the problem as have done exactly the same way
as described in Content Conversion How to Guide for receiver JMS.
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService Local Enterprise Bean exit
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain TransformContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.addHeaderLine SimpleXML2Plain
XML2Plain xml.fieldFixedLengths 8,10,10,20,40,40,8,8
XML2Plain xml.fixedLengthTooShortHandling Cut
regards.
santosh.

Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla..

JMS Adapter Content Conversion

Hi,
I am looking for some help on JMS Receiver content conversion, to put a delimited file on MQ series queue.
I tried the below link, but not able to access the document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use the content conversion module with the xi 3 j2ee jms adapter
If anyone has a copy of the pdf document on JMS content conversion, could you please email it to me at my id : [email protected]
Rgds
R Chandrasekhar

I had send the required PDF
Regards
Arpit seth

JMS Adapter Content conversion using Webspear MQ

Hi All,
I have a scenario where I have to pick a flat file from WebSpear JMS Q.In turn I should convert flat structure into xml structure to parse to the RFC structure(YOTCS_I090_INV_S) and map to the traget structure.
Below is the Source structure:
Messages
->Message1
-->YOTCI_I090_INV_SYNC
--->YOTCS_I090_INV_SYNC
>item
>ZDATE
>TIME
>TZONE
>WERKS
>MATNR
>LGORT
>CHARG
>SOBKZ
>INSMK
>LIFNR
>ZMENGE
>ZMEINS
>LOT_NUMBER
>CODE_DATE
Source file look's as below:
YOTCS_I090_INV_S                                                                                4928
YOTCS_I090_INV_S                                                                                3
YOTCS_I090_INV_S                                                                                3
YOTCS_I090_INV_S                                                                                1
I am doing the file contact conversion as below in JMS Adapter:
Module Key      ParameterName                           ParameterValue
Plain2XML        Transform.Class                           com.sap.aii.messaging.adapter.Conversion
Plain2XML        Transform.ContentType                 text/xml;charset=utf-8
Plain2XML        xml.conversionType                      StructPlain2XML
Plain2XML        xml.documentName                      YOTCI_I090_INV_SYNC
Plain2XML        xml.documentNamespace            urn:sap-com:document:sap:rfc:functions
Plain2XML        xml.item.fieldFixedLengths           8,8,6,4,18,4,10,1,1,10,13,3,10,8
Plain2XML        xml.item.fieldNames ZDATE,TIME,TZONE,WERKS,MATNR,LGORT,CHARG,SOBKZ,INSMK,LIFNR,ZMENGE,ZMEINS,LOT_NUMBER,CODE_DATE
Plain2XML        xml.processFieldNames             fromConfiguration
Plain2XML        xml.recordsetStructure               item,*
Can any one help me in configuring the Content conversion? Hope you got my issue.
Thanks in Advance.
Best Regards,
Jose

Joseph,
Go thru the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Cheers
Agasthuri Doss

Receiver JMS adapter content conversion

Hi All,
Can anyone provide me guidelines on how to do content conversion for the receiver JMS adapter??
Thx
Navin

Hi,
Based on your structure , you need to configure the JMS CC parameters.
see the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
regards
Chilla

JMS Adapter and Conversion Agent

Hi,
Has anyone worked on JMS adapter and Conversion module? JMS adapter is working fine without the conversion agent module.
processing sequence is as follows
1 SAP XI JMS Adapter/ConvertJMSMessageToBinary Local Enterprise Bean convert_JMS2Bin
2 SAP XI JMS Adapter/ConvertBinaryToXMBMessage Locl Enterprise Bean convert_Bin2XI
3 sap.com/com.sap.nw.cm.xi/CMTransformBean Local Enterprise Bean 0
4 CallSapAdapter Local Enterprise Bean call_AF_MS
Also I have given the Parameter Name and value.
Let me know if i am missing something.

I have done the configuration in sender JMS channel. I even created file sender and it is not working.
when i went and checked the initialization events in http://xxxx:50000/CMViewer, I can see some errors under service Initialization.

Content Conversion module in JMS Adapter - MessageTransformBean

Hi All,
We are using Content Conversion module using MessageTransformBean in JMS adapter to read a flat file from MQ Queue.It works fine and the file is getting picked and successfully converted into a xml structure in XI.
The flat file is multiple line file with each line as one xml record.But the xml structure after conversion has only one record in it.So we end up getting multiple messages each with one record instead of ONE xml structure with multiple records in it.
Could I know why I am not getting multiple records in one xml structure as expected.
Do I need to change xml.structureTitle as MyTitle,* or should I put something endSeparator like we do in File Content Conversion.
Any Help appreciated.
Thanks,
V
Edited by: CollinsV on Aug 9, 2010 6:28 AM
Edited by: CollinsV on Aug 9, 2010 6:36 AM
Edited by: CollinsV on Aug 9, 2010 6:38 AM
Edited by: CollinsV on Aug 9, 2010 6:39 AM
Edited by: CollinsV on Aug 9, 2010 6:56 AM

Thanks Shabarish .I did follow the same document , but the xml is not converted as multiple records in it .we are getting only one xml message for each record in the file .
The xml structure we are getting :
<ns:MyDocument xmlns:ns="http://xi.com/test">
<MyTitle>
<field-name1>111</field-name1>
<field-name2>222</field-name2>
<field-name3>333</field-name3>
</MyTitle>
</ns:MyDocument>
We need onle one xml message instead as below.
<ns:MyDocument xmlns:ns="http://xi.com/test">
<MyTitle>
<field-name1>AAA</field-name1>
<field-name2>BBB</field-name2>
<field-name3>CCC</field-name3>
</MyTitle>
<MyTitle>
<field-name1>111</field-name1>
<field-name2>222</field-name2>
<field-name3>333</field-name3>
</MyTitle>
</ns:MyDocument>
Any Help ...
Thanks
V

I need this file "How to Use the Content Conversion Module in JMS Adapter"

Can someone send me this file:
"How to Use the Content Conversion Module in JMS Adapter"
I am not able to find it.
Thanks
Antonello

pls refer guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
Regards,
Swetha.

JMS like content conversion in Seeburger

Hi,
Can you have JMS like content conversion in Seeburger?
In Seeburger adapter if username/password is used, instead of public private keys, can you use JMS like content conversion in Seeburger. (the one which you specify as module parameters)
Regards,
Anirudh.

Depending on what solutions you have: you may use seeburger bic module to convert from csv to xml or other formats. best thing usually is to follow the 2 step mapping strategy of seeburger where bic is doing a non-xml<->xml conversion and the target (XML-) format is mapped to in the SAP Message Mapping.

JMS Adapter - data conversion xml- structured data has extra characters

Further to [Using MQ / JMS adapter with legacy system to talk to SAP;, I am using the Module tab on my receiver JMS Adapter to convert the xml payload to a structured format. It converts to the mainframe ebcdic code set. I am on PI 7.11, and the MQ Series (which JMS interacts with) is 6.0. The code I have is comparable to the wiki:[http://wiki.sdn.sap.com/wiki/display/XI/HowTo...ContentconversionmodulewithJ2EEJMS+adapter], i.e. the example at the very bottom of that article.
The issue we are having is that an extra character gets inserted at the end of each structure (within the message), i.e. our message contains 4 structures, but when we view the structured data on our mainframe system (that arrives from PI), the entire message is shifted by 4 characters... by 1 after the end of each structure. On the mainframe, this extra character appears as '.'. It must be an end-of-line or something...
Has anyone had the same issue? If so, were you able to resolve? I could probably set up my message data type to just be one big declare (thus eliminating the use of structures within it), but that is something I'd rather not do.
We are in the process of reviewing Note 856346, #6 but not sure if it applies.
Regards,
Keith

Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla..

JMS sender adapter content conversion error

Hi,
Kindly find the error report from MONI.. and have followed this document for sender JMS content configuration
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_NFEIN_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
<SAP:P3>Content is not allowed in prolog.</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_NFEIN_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

hi folks i have resolved that issue it was mapping change...
Now i'm facing another problem .. I m gettin only header record but i don see me items...
my structure is like this field fixed length
HEADER ( 1 )
OrderDetail(Min - 1 and Max - Unbounded)
Trailer(Min - 1 and Max - Unbounded)
configuration of my JMS adapter :
Transform.Class                              :com.sap.aii.messaging.adapter.Conversion
Transform.ContentType                 :text/xml;charset=utf-8
xml.conversionType                      :StructPlain2XML
xml.processFieldNames                :fromConfiguration
xml.documentName                     : MyDocument
xml.documentNamespace           : http://xi.com/test
xml.recordsetStructure               : Header,1,OrderDetail,,Trailer,
xml.recordsetName                     : Dataset
xml.Header.keyFieldName            :abc
xml.Header.keyFieldValue            :x1
XML xml.keyFieldType                 :CaseSensitiveString
xml.Header.fieldFixedLengths     :1,2,3..
xml.Header.fieldNames                :abc,cde,fgh...
Similarly for order and trailer
Kindly help in this regard.. i was not able to find in search

Ignore record in JMS sender content conversion

Hi,
I am using JMS sender adapter with content conversion.
In the input text file, I have to ignore the first record.
for this, in Module tab I have given parameter like this:
Plain2XML -> documentOffset -> 1
so that it will not read the first record in the text file.
But it is not working
Please suggest the right way.
Regards,
Anil.

It should be:
xml.documentSkipFirstRows
Regards
Stefan

Receiver Mail Adapter content conversion

Hi
I have read a lot of forums, etc and changed much on my adapter, but still get a xml file send as an attachment instead of a text file.
Can anyone please advise on how to change the receiver adapter to covert from xml to text.
I have added the module processing sequence like follow - please help.
Processing sequence
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean Mail
Module configuration
XML2Plain Details.endSeparator                               'nl'
XML2Plain Details.fieldName                               ZINDUS,TCODE,TDATE,RDATE
XML2Plain Details.fieldSeparator                          |
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion      xml/txt
XML2Plain Transform.ContentDisposition                          attachment;filename="TEBA.txt"
XML2Plain Transform.ContentType                          xml/plain
XML2Plain xTransform.recordsetStructure                     Details
Thanks
Clinton

Hi,
From the mail adapter FAQ,
<i>How can I set the file name of a mail attachment?
           There are several MIME headers that play a role in how the client retrieves the file name of an attachment. Unfortunately, this behavior differs among various mail clients. The reason for this inconsistent behavior comes from the fact that this mechanism has been extended incrementally. The old way is to use the name parameter in the Content-Type header as specified in RFC1341. For example, you can set the content type of an XML attachment as:
           Content-Type: application/xml; name="abc.xml"
           RFC1521 discourages the use of this name parameter in anticipation of the new header Content-Disposition, which is defined in RFC1806.
           With this Content-Disposition header, you can set the file name as:
           Content-Disposition: attachment; filename="abc.xml"
           Some clients may show the Content-Description value as the file name. The Content-Description header is typically used to associate some descriptive information to an attachment (RFC1341) as in
           Content-Description: my xml file
           To avoid potential interpretation problems, it is recommended to combine the use of these headers.</i>
Also, the note 779981 describes how to set Content Type in the mapping program. Am not sure, but combining the two, maybe it should be possible! Havent tried something of this sort though!
Regards
Bhavesh

JMS Adapter binary conversion error

I am getting an MQ message. The message has / embedded when it is picked by JMS Adapter. Because the message content has /, JMS is stripping the message. Is there anyway to get the whole message into XI from JMS without the message getting stripped.
the error message is below
Error while processing message '3c698d81-983c-4d3c-2272-cb505bbd3e4a'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in converting Binary message 1193200ST20080509110023912134297100239120000DI2SAPDVDIROUTI7080509110023912 EDI00000        INITAREQDI2SAPDVBNSF           EBSTMNT 120886882PNCBANK        I N01                                      Y 01,043000096,FORTE,080422,0830,01,80,80,2/                                       02,RCVR,043000096,1,080422,0830,USD,/                                           03,1019283631,USD,030,28192752,,,060,28192752,,,072,000,,,074,000,,/
Edited by: developer on Jul 1, 2008 9:55 PM

hi folks i have resolved that issue it was mapping change...
Now i'm facing another problem .. I m gettin only header record but i don see me items...
my structure is like this field fixed length
HEADER ( 1 )
OrderDetail(Min - 1 and Max - Unbounded)
Trailer(Min - 1 and Max - Unbounded)
configuration of my JMS adapter :
Transform.Class                              :com.sap.aii.messaging.adapter.Conversion
Transform.ContentType                 :text/xml;charset=utf-8
xml.conversionType                      :StructPlain2XML
xml.processFieldNames                :fromConfiguration
xml.documentName                     : MyDocument
xml.documentNamespace           : http://xi.com/test
xml.recordsetStructure               : Header,1,OrderDetail,,Trailer,
xml.recordsetName                     : Dataset
xml.Header.keyFieldName            :abc
xml.Header.keyFieldValue            :x1
XML xml.keyFieldType                 :CaseSensitiveString
xml.Header.fieldFixedLengths     :1,2,3..
xml.Header.fieldNames                :abc,cde,fgh...
Similarly for order and trailer
Kindly help in this regard.. i was not able to find in search

Receiver File Adapter - Content Conversion

Hi,
I don't quite get this:
I have a structure
<?xml version="1.0" encoding="UTF-8"?>
<AnElement1>
   <AnElement2>
      Bla bla bla
   </AnElement2>
</AnElement1>
I want to convert this to a flat file with a line containing
Bla bla bla
In te receiver file adapter I define the following:
In the 'Content Conversion Parameters'
Recordset Structure : AnElement2
Name                         Value
AnElement2.addHeaderLine         0
AnElement2.fieldSeparator        'nl'
AnElement2.endSeparator          'nl'
This results in an Empty file each time indicating some error somewhere.
What am I missing?
Thanks
Andre

Hi Andre,
Just check the link <a href="http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm">File content conversion</a>
Also check out this web log <a href="/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 to TXT</a>
Is there any error log shown in File adapter ?
Regards,
Keith
Message was edited by: keith thompson

Complex XML to Plain in JMS adapter "Content conversion module"

Similar Messages

Maybe you are looking for