Complicated Issue - Unable to Call # etc

OK, this is complicated. I will give you the entire story and go from there:
1. Ihad a MagicJack early model. It sucked. Ported the number to another carrier VOIPO. Had tons of issues with the port due to L3 issues.
2. Tried the MJ+ model, and it was great (worked on my FAX perfectly). So, I ported my number BACK to MJ. this was in february 2014.
3. When I tried to call people on my old carrier, I could not. they could not call me. Now, after working with that carrier, I can initiate calls to their customers. But they cannot call me.
4. Today, I discovered that calling my home number from my Skype number (yes I have a number and landline calling services), I get the same response, one ring in the ear piece, about 7 seconds of silence, then a disconnect.
5. Spoke with the old carrier, VOIPO again, mentioned the Skype issue. He looked, and Skype in the USA used L3 as their service provider as well. So it souonds like L3 is to blame.
6. The question becomes, how do I contact SKYPE support to have them get on L3 as well to fix the issue. If I cannot call home using Skype, why should I keep the service when it runs out next year??
Any help, comments etc are welcomed. I really like the MJ+ units, they are VERY solid and sound quality is fantastic! Only VOIP unit I could ever get to work with FAX!! But, I need to be able to receive phone calls, especially from SKYPE!
Take care & thanks for the time!

Similar Messages

Unable to call the RFC from the WD java Program

Hi All,
I have a table and three buttons Create, Edit, Save in the layout.
If no record available in the R3 the the end user will click on create and then he will click on save so that the insert RFC will be called accordingly and the record will be inserted.My table is limited to 5 records only. If i enter all the 5 records and Click on submit the record is inserting in the backend , but if i enter less than 5 records im unable to call the RFC what might be the issue.
My insert RFC takes one Table node and 4 import parameters i'm passing all of the all the mentioned import parameters.
Code:-
View Controller code
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.gmr.ess;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateAPPView).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import java.math.BigDecimal;
import java.util.Date;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.ArrayList;
import java.util.Calendar;
import java.util.Collection;
import java.util.Iterator;
import com.gmr.ess.wdp.IPrivateAPPView;
import com.gmr.pck.Zst_Hr_Nominee;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
import com.sap.tc.webdynpro.services.sal.um.api.IWDClientUser;
import com.sap.tc.webdynpro.services.sal.um.api.WDClientUser;
//@@end
//@@begin documentation
//@@end
public class APPView
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(APPView.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.gmr.ess.wdp.IPrivateAPPView for more details
private final IPrivateAPPView wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.gmr.ess.wdp.IPrivateAPPView.IContextNode for more details.
private final IPrivateAPPView.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDViewController wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public APPView(IPrivateAPPView wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 try{
 IWDMessageManager manager1 = wdComponentAPI.getMessageManager();
 IWDClientUser user = WDClientUser.getLoggedInClientUser();
 String logUser= user.getSAPUser().getUniqueName();
 wdContext.currentContextElement().setUserid(logUser);
 wdThis.wdGetAPPController().executeBapi_Employee_Getdata_Input();//Returns the user id for the employee
 Collection nomineeList = new ArrayList();
 wdThis.wdGetAPPController(). executeZ_Hrfm_Nominee_Disp_Input( );
 int nomineeTableSize = wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().size();
 for(int i=0;i< nomineeTableSize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 ele.setAddr(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getAddr());
 ele.setDob(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getDob());
 ele.setGuard(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getGuard());
 ele.setName(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getName());
 ele.setPerc(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getPerc());
 ele.setRelat(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getRelat());
 nomineeList.add(ele);
 wdContext.nodeDisplay_table_node().bind(nomineeList);
 wdContext.currentContextElement().setEdit_val_attr(true);
 if(nomineeTableSize<=0){
 wdContext.currentContextElement().setCreateButtonEnable(true);
 wdContext.currentContextElement().setEditButtonEnable(false);
 else{
 wdContext.currentContextElement().setCreateButtonEnable(false);
 wdContext.currentContextElement().setEditButtonEnable(true);
 catch(Exception e){
 wdComponentAPI.getMessageManager().reportException("",true);
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoModifyView
Hook method called to modify a view just before rendering.
This method conceptually belongs to the view itself, not to the
controller (cf. MVC pattern).
It is made static to discourage a way of programming that
routinely stores references to UI elements in instance fields
for access by the view controller's event handlers, and so on.
The Web Dynpro programming model recommends that UI elements can
only be accessed by code executed within the call to this hook method.
@param wdThis Generated private interface of the view's controller, as
 provided by Web Dynpro. Provides access to the view controller's
 outgoing controller usages, etc.
@param wdContext Generated interface of the view's context, as provided
 by Web Dynpro. Provides access to the view's data.
@param view The view's generic API, as provided by Web Dynpro.
 Provides access to UI elements.
@param firstTime Indicates whether the hook is called for the first time
 during the lifetime of the view.
//@@end
public static void wdDoModifyView(IPrivateAPPView wdThis, IPrivateAPPView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
 //@@begin wdDoModifyView
 //@@end
//@@begin javadoc:onActionGetData(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionGetData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionGetData(ServerEvent)
 //$$begin ActionButton(-535519310)
 //wdThis.wdGetAPPController().executeZ_Hrfm_Nominee_Disp_Input();
 //$$end
 //@@end
//@@begin javadoc:onActionEdit(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionEdit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionEdit(ServerEvent)
 //$$begin ActionButton(-535519310)
 displayTablesize=wdContext.nodeDisplay_table_node().size();
 if(displayTablesize<5){
 for(int i=0;i<size-displayTablesize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 wdContext. nodeDisplay_table_node().addElement(ele);
 operation="MOD";
 wdContext.currentContextElement().setTableReadOnly(true);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 //$$end
 //@@end
//@@begin javadoc:onActionCreate(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionCreate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionCreate(ServerEvent)
 int month=0,year=0,day=0;
 String month1,day1,year1;
 try{
 displayTablesize=wdContext.nodeDisplay_table_node().size();
 wdContext.currentContextElement().setEdit_val_attr(false);
 if(wdContext.nodeDisplay_table_node().isEmpty()){
 if(displayTablesize<5){
 Calendar cal=Calendar.getInstance();
 month=cal.get(Calendar.MONTH)+1;
 if(month==1||month==2||month==3||month==4||month==5||month==6||month==7||month==8||month==9){
 month1="0"+month;
 else{
 month1=""+month;
 day = cal.get(Calendar.DAY_OF_MONTH);
 if(day==1||day==2||day==3||day==4||day==5||day==6||day==7||day==8||day==9){
 day1= "0"+day;
 else{
 day1=""+day;
 year = cal.get(Calendar.YEAR);
 year1=""+year;
 String strFormat=day1"."month1"."year1;
 wdContext.currentOutput_NomineeElement().setBegda(strFormat);
 wdContext.currentOutput_NomineeElement().setEndda("31.12.9999");
 for(int i=0;i<size-displayTablesize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 wdContext. nodeDisplay_table_node().addElement(ele);
 operation="INS";
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 wdContext.currentContextElement().setTableReadOnly(true);
 catch(NullPointerException npe){
 wdComponentAPI.getMessageManager().reportException("No Data Available",true);
 //@@end
//@@begin javadoc:onActionSaveData(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionSaveData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionSaveData(ServerEvent)
 float percentage=0;
 float dupePercentage=0;
 boolean isTest = false;
 Collection DispTList = new ArrayList();
 IWDMessageManager manager1 = wdComponentAPI.getMessageManager();
 try{
 displayTablesize = wdContext.nodeDisplay_table_node().size();
 //for(int i=1;i<=displayTablesize;i++){
 for(int i=0;i<displayTablesize;i++){
 BigDecimal share = wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc();
 String name = wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName();
 percentage = share.floatValue();
 dupePercentage = dupePercentage + percentage;
 if(name!=null && share!=null){
 Zst_Hr_Nominee nominee = new Zst_Hr_Nominee();
 nominee.setAddr(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getAddr());
 manager1.reportSuccess(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getAddr());
 nominee.setDob(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getDob());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getDob());
 nominee.setGuard(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getGuard());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getGuard());
 nominee.setName(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName());
 nominee.setPerc(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc());
 nominee.setRelat(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getRelat());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getRelat());
 DispTList.add(nominee);
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().nodeNominee_ins().bind(DispTList);
 if((dupePercentage)!=100)
 wdComponentAPI.getMessageManager().reportException(
 "The sum of the share Percentages is not 100. Modify the percentages accordingly",true);
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().nodeNominee_ins().bind(DispTList);
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 String beginDate = wdContext.currentOutput_NomineeElement().getBegda();
 manager.reportSuccess(wdContext.currentOutput_NomineeElement().getBegda());
 String endDate=wdContext.currentOutput_NomineeElement().getEndda();
 manager.reportSuccess(wdContext.currentOutput_NomineeElement().getEndda());
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setBegda(beginDate);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setEndda(endDate);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 wdComponentAPI.getMessageManager().reportSuccess(operation);
 wdThis.wdGetAPPController().executeBapi_Employee_Getdata_Input();
 wdThis.wdGetAPPController().executeZ_Hrfm_Nominee_Ins_Mod_Input();
 //wdContext.currentContextElement().setTableReadOnly(false);
 catch(Exception e){
 e.getMessage();
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
int nomineeTableSize = 0;
int displayTablesize = 0;
String operation= null;
int size=5;
// float dupePercentage=0;
//String mod_op="MOD";
//@@end
content of obsolete user coding area(s) -
//@@begin obsolete:javadoc:onActionSave(ServerEvent)
// /** Declared validating even
Component controller code
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.gmr.ess;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateAPP).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import java.util.Iterator;
import com.gmr.ess.wdp.IPrivateAPP;
import com.gmr.pck.Bapi_Employee_Getdata_Input;
import com.gmr.pck.Bapip0002B;
import com.gmr.pck.Z_Hrfm_Nominee_Disp_Input;
import com.gmr.pck.Z_Hrfm_Nominee_Ins_Mod_Input;
import com.gmr.pck.Zst_Hr_Nominee;
import com.sap.lcr.api.util.SetProfileConnect;
import com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
//@@end
//@@begin documentation
//@@end
public class APP
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(APP.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.gmr.ess.wdp.IPrivateAPP for more details
private final IPrivateAPP wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.gmr.ess.wdp.IPrivateAPP.IContextNode for more details.
private final IPrivateAPP.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public APP(IPrivateAPP wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 //$$begin Service Controller(1490375209)
// wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().bind(new Z_Hrfm_Nominee_Ins_Mod_Input());
 Z_Hrfm_Nominee_Ins_Mod_Input input = new Z_Hrfm_Nominee_Ins_Mod_Input();
 input.addNominee(new Zst_Hr_Nominee());
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().bind(input);
 //$$end
 //$$begin Service Controller(-932523997)
 wdContext.nodeZ_Hrfm_Nominee_Disp_Input().bind(new Z_Hrfm_Nominee_Disp_Input());
 //$$end
 //$$begin Service Controller(-368783613)
 wdContext.nodeBapi_Employee_Getdata_Input().bind(new Bapi_Employee_Getdata_Input());
 //$$end
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoPostProcessing()
Hook called to handle data retrieval errors before rendering.
After doModifyView(), the Web Dynpro Framework gets all context data needed
for rendering by validating the contexts (which in turn calls the supply
functions and supplying relation roles). In this hook, the application
should handle the errors which occurred during validation of the contexts.
Using preorder depth-first traversal, this hook is called for all component
controllers starting with the current root component.
Permitted operations:
- Flushing model queue
- Creating messages
- Reading context and model data
Forbidden operations:
- Invalidating model data
- Manipulating the context
- Firing outbound plugs
- Creating components
@param isCurrentRoot true if this is the root of the current request
//@@end
public void wdDoPostProcessing(boolean isCurrentRoot)
 //@@begin wdDoPostProcessing()
 //@@end
//@@begin javadoc:wdDoBeforeNavigation()
Hook before the navigation phase starts.
This hook allows you to flush the model queue and handle any
errors that occur. Firing outbound plugs is allowed in this hook.
Using preorder depth-first traversal, this hook is called for all component
controllers starting with the current root component.
@param isCurrentRoot true if this is the root of the current request
//@@end
public void wdDoBeforeNavigation(boolean isCurrentRoot)
 //@@begin wdDoBeforeNavigation()
 //@@end
//@@begin javadoc:wdDoApplicationStateChange()
Hook that informs the application about a state change.

This hook is called e.g. to tell the application that will be
<ul>
<li>left via a suspend plug and therefore should go into a suspend/sleep
 mode with minimal need of resources. errors that occur. Firing
 outbound plugs is allowed in this hook.
<li>left due to a timeout and could write it's state to a data base if the
 user comes back later on
</ul>
The concrete reason is available via IWDApplicationStateChangeInfo

Important: This hook is called for the top level component only!
@param stateChangeInfo contains the information about the nature of the state change
@param stateChangeReturn allows the application to ask for a different state change.
 The framework is allowed to ignore it considering i.e. the current resources situation.
//@@end
public void wdDoApplicationStateChange(com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo stateChangeInfo, com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeReturn stateChangeReturn)
 //@@begin wdDoApplicationStateChange()
 //@@end
//@@begin javadoc:executeBapi_Employee_Getdata_Input()
/** Declared method. */
//@@end
public void executeBapi_Employee_Getdata_Input( )
 //@@begin executeBapi_Employee_Getdata_Input()
 //$$begin Service Controller(1705750894)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 Iterator itrGetData = null;
 Bapip0002B out = null;
 try
 wdContext.currentBapi_Employee_Getdata_InputElement().modelObject().execute();
 wdContext.nodeOutput().invalidate();
 itrGetData = wdContext.currentOutputElement().modelObject().getPersonal_Data().iterator();
 while (itrGetData.hasNext()) {
 out = (Bapip0002B) itrGetData.next();
 empNo = out.getPerno();
 wdContext.currentZ_Hrfm_Nominee_Disp_InputElement().setPernr(empNo);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setPernr(empNo);
// manager.reportSuccess(empNo);
 //wdThis.executeZ_Hrfm_Nominee_Disp_Input();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
//@@begin javadoc:executeZ_Hrfm_Nominee_Disp_Input()
/** Declared method. */
//@@end
public void executeZ_Hrfm_Nominee_Disp_Input( )
 //@@begin executeZ_Hrfm_Nominee_Disp_Input()
 //$$begin Service Controller(-366407911)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 try
 wdContext.currentZ_Hrfm_Nominee_Disp_InputElement().modelObject().execute();
 wdContext.nodeOutput_Nominee().invalidate();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
//@@begin javadoc:executeZ_Hrfm_Nominee_Ins_Mod_Input()
/** Declared method. */
//@@end
public void executeZ_Hrfm_Nominee_Ins_Mod_Input( )
 //@@begin executeZ_Hrfm_Nominee_Ins_Mod_Input()
 //$$begin Service Controller(1524028406)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 try
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().modelObject().execute();
 wdContext.nodeOutput_nominee_ins_mod().invalidate();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
String empNo = null;
//@@end
Suman
Edited by: sumankumar kurimilla on Dec 23, 2008 9:26 AM

Hi,
I have checked from RFC side that is working fine only java app its not working can you tell any thing needs to be changed from my application end.
Please check in Savedata action.
Regards,
Suman
Edited by: sumankumar kurimilla on Dec 23, 2008 11:01 AM

Unable to call exported client methods of EJB session bean remote interface

I am unable to call client methods of a BC4J application module deployed as a Session EJB to Oracle 8i at the client side of my multi-tier application. There is no documentation, and I am unable to understand how I should do it.
A business components project has been created. For instance, its application module is called BestdataModule. A few custom methods have been added to BestdataModuleImpl.java file, for instance:
public void doNothingNoArgs() {
public void doNothingOneArg(String astr) {
public void setCertificate(String userName, String userPassword) {
theCertificate = new Certificate(userName, userPassword);
public String getPermission() {
if (theCertificate != null)
{if (theCertificate.getPermission())
{return("Yes");
else return("No, expired");
else return("No, absent");
theCertificate being a protected class variable and Certificate being a class, etc.
The application module has been tested in the local mode, made remotable to be deployed as EJB session bean, methods to appear at the client side have been selected. The application module has been successfully deployed to Oracle 8.1.7 and tested in the remote mode. A custom library containing BestdataModuleEJBClient.jar and BestDataCommonEJB.jar has been created.
Then I try to create a client basing on Example Oracle8i/EJB Client snippet:
package bestclients;
import java.lang.*;
import java.sql.*;
import java.util.*;
import javax.naming.*;
import oracle.aurora.jndi.sess_iiop.*;
import oracle.jbo.*;
import oracle.jbo.client.remote.ejb.*;
import oracle.jbo.common.remote.*;
import oracle.jbo.common.remote.ejb.*;
import oracle.jdeveloper.html.*;
import bestdata.client.ejb.*;
import bestdata.common.ejb.*;
import bestdata.common.*;
import bestdata.client.ejb.BestdataModuleEJBClient;
public class BestClients extends Object {
static Hashtable env = new Hashtable(10);
public static void main(String[] args) {
String ejbUrl = "sess_iiop://localhost:2481:ORCL/test/TESTER/ejb/bestdata.BestdataModule";
String username = "TESTER";
String password = "TESTER";
Hashtable environment = new Hashtable();
environment.put(javax.naming.Context.URL_PKG_PREFIXES, "oracle.aurora.jndi");
environment.put(Context.SECURITY_PRINCIPAL, username);
environment.put(Context.SECURITY_CREDENTIALS, password);
environment.put(Context.SECURITY_AUTHENTICATION, ServiceCtx.NON_SSL_LOGIN);
BestdataModuleHome homeInterface = null;
try {
Context ic = new InitialContext(environment);
homeInterface = (BestdataModuleHome)ic.lookup(ejbUrl);
catch (ActivationException e) {
System.out.println(e.getMessage());
e.printStackTrace();
System.exit(1);
catch (CommunicationException e) {
System.out.println(e.getMessage());
e.printStackTrace();
System.exit(1);
catch (NamingException e) {
System.out.println(e.getMessage());
e.printStackTrace();
System.exit(1);
try {
System.out.println("Creating a new EJB instance");
RemoteBestdataModule remoteInterface = homeInterface.create();
// Method calls go here!
// e.g.
// System.out.println(remoteInterface.foo());
catch (Exception e) {
System.out.println(e.getMessage());
e.printStackTrace();
It doesnt cause any errors. However, how must I call methods? The public interface RemoteBestdataModule has no such methods:
void doNothingNoArgs();
void doNothingOneArg(java.lang.String astr);
void setCertificate(java.lang.String userName, java.lang.String userPassword);
java.lang.String getPermission();
Instead of that it has the following methods:
oracle.jbo.common.remote.PiggybackReturn doNothingNoArgs(byte[] _pb) throws oracle.jbo.common.remote.ejb.RemoteJboException, java.rmi.RemoteException;
oracle.jbo.common.remote.PiggybackReturn doNothingOneArg(byte[] _pb, java.lang.String astr) throws oracle.jbo.common.remote.ejb.RemoteJboException, java.rmi.RemoteException;
oracle.jbo.common.remote.PiggybackReturn customQueryExec(byte[] _pb, java.lang.String aQuery) throws oracle.jbo.common.remote.ejb.RemoteJboException, java.rmi.RemoteException;
oracle.jbo.common.remote.PiggybackReturn setCertificate(byte[] _pb, java.lang.String userName, java.lang.String userPassword) throws oracle.jbo.common.remote.ejb.RemoteJboException, java.rmi.RemoteException;
oracle.jbo.common.remote.PiggybackReturn getPermission(byte[] _pb) throws oracle.jbo.common.remote.ejb.RemoteJboException, java.rmi.RemoteException;
I cannot call those methods. I can see how they are called in BestdataModuleEJBClient.java file:
public void doNothingNoArgs() throws oracle.jbo.JboException {
try {
oracle.jbo.common.remote.PiggybackReturn _pbRet = mRemoteAM.doNothingNoArgs(getPiggyback());
processPiggyback(_pbRet.mPiggyback);
if (_pbRet.isReturnStreamValid()) {
return;
catch (oracle.jbo.common.remote.ejb.RemoteJboException ex) {
processRemoteJboException(ex);
catch (java.rmi.RemoteException ex) {
processRemoteJboException(ex);
throw new oracle.jbo.JboException("Marshall error");
However, I cannot call getPiggyback() function! It is a protected method, it is available to the class BestdataModuleEJBClient which extends EJBApplicationModuleImpl, but it is unavailable to my class BestClients which extends Object and is intended to extend oracle.jdeveloper.html.WebBeanImpl!
It seems to me that I mustnt use RemoteBestdataModule interface directly. Instead of that I must use the public class BestdataModuleEJBClient that extends EJBApplicationModuleImpl and implements BestdataModule interface. It contains all methods required without additional arguments (see just above). However, how must I create an object of BestdataModuleEJBClient class? That is a puzzle. Besides my custom methods the class has only two methods:
protected bestdata.common.ejb.RemoteBestdataModule mRemoteAM;
/*This is the default constructor (do not remove)*/
public BestdataModuleEJBClient(RemoteApplicationModule remoteAM) {
super(remoteAM);
mRemoteAM = (bestdata.common.ejb.RemoteBestdataModule)remoteAM;
public bestdata.common.ejb.RemoteBestdataModule getRemoteBestdataModule() {
return mRemoteAM;
It looks like the remote application module must already exist! In despair I tried to put down something of the kind at the client side:
RemoteBestdataModule remoteInterface = homeInterface.create();
BestdataModuleEJBClient dm = new BestdataModuleEJBClient(remoteInterface);
dm.doNothingNoArgs();
Of course, it results in an error.
System Output: null
System Error: java.lang.NullPointerException
System Error: oracle.jbo.common.PiggybackOutput oracle.jbo.client.remote.ApplicationModuleImpl.getPiggyForRemovedObjects(oracle.jbo.common.PiggybackOutput) (ApplicationModuleImpl.java:3017)
System Error: byte[] oracle.jbo.client.remote.ApplicationModuleImpl.getPiggyfront(boolea
System Error: n) (ApplicationModuleImpl.java:3059)
System Error: byte[] oracle.jbo.client.remote.ApplicationModuleImpl.getPiggyback() (ApplicationModuleImpl.java:3195)
System Error: void bestdata.client.ejb.BestdataModuleEJBClient.doNothingNoArgs() (BestdataModuleEJBClient.java:33)
System Error: void bes
System Error: tclients.BestClients.main(java.lang.String[]) (BestClients.java:76)
I have studied a lot of documents in vain. I have found only various senseless discourses:
"Use the Application Module Wizard to make the Application Module remotable and export the method. This will generate an interface for HrAppmodule (HrAppmodule.java in the Common package) which contains the signature for the exported method promoteAllEmps(). Then, deploy the Application Module. Once the Application Module has been deployed, you can use the promoteAllEmps() method in your client-side programs. Calls to the promoteAllEmps() method in client-side programs will result in calls to the promote() method in the application tier."
However, I have failed to find a single line of code explaining how it should be called.
Can anybody help me?
Best regards,
Svyatoslav Konovaltsev,
[email protected]
null

Dear Steven,
1. Thank you very much. It seems to me that the problem is solved.
2. "I logged into Metalink but it wants me to put in both a tar number and a country name to see your issue." It was the United Kingdom, neither the US nor Russia if you mean my issue.
I reproduce the text to be written by everyone who encounters the same problem:
package bestclients;
import java.util.Hashtable;
import javax.naming.*;
import oracle.jbo.*;
public class BestdataHelper {
public static ApplicationModule createEJB()
throws ApplicationModuleCreateException {
ApplicationModule applicationModule = null;
try {
Hashtable environment = new Hashtable(8);
environment.put(Context.INITIAL_CONTEXT_FACTORY, JboContext.JBO_CONTEXT_FACTORY);
environment.put(JboContext.DEPLOY_PLATFORM, JboContext.PLATFORM_EJB);
environment.put(Context.SECURITY_PRINCIPAL, "TESTER");
environment.put(Context.SECURITY_CREDENTIALS, "TESTER");
environment.put(JboContext.HOST_NAME, "localhost");
environment.put(JboContext.CONNECTION_PORT, new Integer("2481"));
environment.put(JboContext.ORACLE_SID, "ORCL");
environment.put(JboContext.APPLICATION_PATH, "/test/TESTER/ejb");
Context ic = new InitialContext(environment);
ApplicationModuleHome home = (ApplicationModuleHome)ic.lookup("bestdata.BestdataModule");
applicationModule = home.create();
applicationModule.getTransaction().connect("jdbc:oracle:kprb:@");
applicationModule.setSyncMode(ApplicationModule.SYNC_IMMEDIATE);
catch (NamingException namingException) {
throw new ApplicationModuleCreateException(namingException);
return applicationModule;
package bestclients;
import bestdata.common.*;
import certificate.*;
public class BestClients extends Object {
public static void main(String[] args) {
BestdataModule bestdataModule = (BestdataModule)BestdataHelper.createEJB();
Certificate aCertificate = new Certificate("TESTER", "TESTER");
//calling a custom method!!
bestdataModule.passCertificate(aCertificate);
Thank you very much,
Best regards,
Svyatoslav Konovaltsev.
[email protected]
null

Unlimited World - unable to call landlines (AUSTRA...

Hi,
Apologies for having to create a thread about this, however I'm unable to access the support page (keeps saying, "Error, please reload this page" when trying to select a category).
I have an active Premium with Unlimited World subscription (the free month offer), however I am unable to call any local landlines, it keeps saying "Not enough Skype credit."
I've read all the troubleshooting guides, saying to check you have an active subscription, etc etc... My account definitely shows an active Unlimited World subscription with unlimited minutes, and when looking through the Skype application it says I have 2 Active Subscriptions (assuming, Premium + Unlimited World).
Any help would be very appreciated.
Solved!
Go to Solution.

Are you calling domestic landlines (not business landlines)?
Are you using the correct dialstring? - +61 xxx xxx xxxx
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Snom phones in secondary subnet unable to call out - SIP CANCEL in SIP log

I've been trying to diagnose this very strange problem we are having. All our servers and some SNOM phones are in the subnet 192.168.100.0, the main building. They all work fine. Phones located in two other buildings connected with high-speed fiber use subnets
192.168.1.0 and 192.168.200.0. They can receive calls but are unable to call out. This doesn't affect the Lync 2010 and 2013 desktop clients with enterprise voice...they work fine anywhere, even externally.
We are running Lync Server 2013 Standard Edition, with the latest updates applied. Mediation role is co-located. Edge server is setup and I think I have configured everything correctly. I have two network adapters, one external facing and one internal facing.
External facing one has dns settings and gateway, internal facing has neither. I have setup persistent routes that enable the edge server to ping hosts in 1.0 and 200.0 no problem. DNS is setup internally so anyone anywhere can ping the edge server (its dns
entry is routable lync2013edge.network.domain.ca). Phones used are the SNOM 720, I have the latest updates applied (8.8.3.27 UC)
On the actual SNOM phone, I will dial 7804636201. It will call and start ringing the other party. Almost exactly 10 seconds later I will hear a busy signal and then the phone displays "Media Connectivity Failure". I ran a log on SIP from the FE
Standard Edition server, here are some entries that I noticed that may have something to do with it (see bottom four paragraphs for SIP CANCEL)
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:42.240.0008db5d (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D806F0 ) Start Line: INVITE sip:7804636201;[email protected];user=phone SIP/2.0
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.269.0009106f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2F91
Direction: outgoing
Peer: lync2013.network.caedm.ca:5070
Message-Type: request
Start-Line: INVITE sip:[email protected]:5070;user=phone;maddr=lync2013.network.caedm.ca SIP/2.0
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 INVITE
Contact: <sip:[email protected];opaque=user:epid:cO0WSS9wCFqUnP0dpEh6uQAA;gruu>;reg-id=1
Via: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
Record-Route: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
Max-Forwards: 69
Content-Length: 3563
Content-Type: multipart/alternative;boundary="next_part_u00iwyrezkkuxf3d"
P-Asserted-Identity: "Joel Smith"<tel:+17808092404;ext=2404>
Message-Body: --next_part_u00iwyrezkkuxf3d
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-Dis; handling=optional; ms-proxy-2007fallback
TL_INFO(TF_DIAG) [0]411C.2DE8::02/24/2015-17:23:42.270.000915ec (SIPStack,SIPAdminLog::WriteDiagnosticEvent:SIPAdminLog.cpp(802))[3706963737] $$begin_record
Severity: information
Text: Routed a locally generated response
SIP-Start-Line: SIP/2.0 100 Trying
SIP-Call-ID: 3faa35f677ef48719b27c796251b0519
SIP-CSeq: 1 INVITE
Peer: 192.168.1.201:51470
Data: destination="[email protected]"
$$end_record
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.274.000928d4 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2F93
Direction: outgoing;source="local"
Peer: 192.168.1.201:51470
Message-Type: response
Start-Line: SIP/2.0 101 Progress Report
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 INVITE
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
Content-Length: 0
ms-diagnostics: 12006;reason="Trying next hop";source="LYNC2013.NETWORK.CAEDM.CA";PhoneUsage="Long Distance";PhoneRoute="LocalRoute";Gateway="208.68.17.53";appName="OutboundRouting"
$$end_record
TL_INFO(TF_PROTOCOL) [1]411C.2DE8::02/24/2015-17:23:42.488.000930bc (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[741182734] $$begin_record
Trace-Correlation-Id: 741182734
Instance-Id: 2F96
Direction: incoming
Peer: lync2013.network.caedm.ca:5070
Message-Type: response
Start-Line: SIP/2.0 183 Session Progress
FROM: "Joel Smith"<sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
TO: <sip:7804636201;[email protected];user=phone>;tag=d265bdc1c8;epid=0A24894D6D
CALL-ID: 3faa35f677ef48719b27c796251b0519
CSEQ: 1 INVITE
CONTACT: <sip:[email protected];gruu;opaque=srvr:MediationServer:0wzNMLUTNFKXO5KjW1mbdQAA>;isGateway
VIA: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE,SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
RECORD-ROUTE: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
CONTENT-LENGTH: 1388
CONTENT-TYPE: application/sdp
TL_VERBOSE(TF_NETWORK) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f6b (SIPStack,CRecvContext::CreateIncomingRequest:RecvContext.cpp(920))[3030787245]( 0000005F01E739D0 ) creating SIP_MID_CANCEL request
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f90 (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D7E2E0 ) Start Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00099054 (SIPStack,CSIPMessage::ParseNextHeader:SIPMessage.cpp(1532))( 0000005F03D7E2E0 ) Found Header: Reason: SIP;cause=488;text="Media Connectivity Failure"
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:51.369.000990c6 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2FA0
Direction: incoming
Peer: 192.168.1.201:51470
Message-Type: request
Start-Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport
Max-Forwards: 70
Content-Length: 0
$$end_record
I thought it might be a timeout issue, so I tried following these steps located here:
http://ipfone.hu/lync-mediation-server-cancel-problem/ After rebooting the server no changes were noticed.
I also checked out this website
http://blog.insidelync.com/2013/04/sip-trunking-101-with-lync-server-2013/ regarding disabling the check box "enable outbound routing failover timeout". Doing that had no effect.
Any other ideas would be appreciated.

Hi,
yes I see the config file is very simple and standard.
So the issue with snom on branch sites is random, it's correct?
From what I read in your answer, sometimes you can establish a correct communication between a snom and the called number +17804636201.
Have you tried to collect a network capture on a snom at branch location?
Do you have some other version of snom phone (300, 710, 821) to test?
Do you have some LPE ip-phone (Polycom CX600 o HP4110-4120) to test?
Regards
Luca
Luca Vitali | MCITP Lync/Exchange | snom Certified Engineer | Sonus SBC1000 Engineer

LG Revolution - No mobile network connection, slow at everything, have to press "End" at least 3 times before ending a call, etc.

Does anyone else have an LG Revolution with NEVER ENDING PROBLEMS?!
My biggest issue right now: I can't get any service when I'm at work. I work with about 5 others who have Verizon as their provider and they will all have 4 bars of service when I have absolutely nothing - but this only happens when I'm at work. It used to help when I put it in Airplane Mode for a while and switched it back. It also sometimes helped if I pulled the battery and SIM card out for a while, but now nothing works at all.
The second issue I have is this phone was really fast when I first got it and it's progressively gotten slower. I've had it since July 2011 and I CAN'T WAIT until my next upgrade. The slowness of this phone is just irritating. I go through the phone's browser history every few days and delete everything, the cache, the location access, the saved passwords, etc. I also go through and delete the old text messages and call logs. It doesn't make a difference. And I'm assuming that the fact that I have to press "END" a zillion times when I'm trying to end a call has to do with the slowness of the phone.
One more big issue: Whenever I call Verizon Wireless Tech support for any help, they say they can't help me troubleshoot the phone because I'm calling from it, but I don't have a land line at my house, and I'm not about to spend my entire day at work on the phone trying to fix it.
Anyone have any suggestions? ANYTHING would be helpful

Has nothing to do with the SIM or master reset. This has been done to my phone. The SIM once and the factory reset many times over. You all just sold us a bad piece of equipment and have us by the tail with our contracts so none of us can get a new phone without paying full price or re-upping our contract. I just got off the phone last night with your high up tech people (you know, the hidden number we get once we tear into your support people enough), they went into my phone again and still didn't find anything wrong. I about got fired from my job for not getting my calls and texts. The BBB has now been contacted, and I feel your end should shore this up for all of us!

Unable to call or text while overseas, but calling the US is ok

I used to have a Blackberry Bold through Verizon and had no problems using it overseas. A month or so I upgraded to a HTC DNA and as usual, called Verizon to sign up for their global data plan, and took my HTC overseas. Once in Europe, I was unable to call or text locally, or even sending or receiving texts to/from the US. I tried calling the US and that did work. I tried the "+" and "00" and had all the correct country/city codes locally. I called Verizon back home and the global service tech just asked me to keep trying the "00" but it didn't work. The only thing I did turn off on my phone was the "roaming data". My airplane mode is off. I am still overseas currently, but not able to communicate. Everytime I cross the border I do get Verizon standard texts saying how much it will cost if I turn on my data, and etc. Any ideas or suggestions? Thanks.

Hello deblenheim
I'm sorry to hear your having trouble using your DNA while traveling overseas. We need to determine if this is your device or Sim card or the network over there. Please reach out to us from a different device at: 908-559-4899. I'm sure we can get to the bottom of this together.
JoeL_VZW
Please follow us on twitter @vzwsupport

Sudo unable to open /etc/sudoers

Whenever I try to do anything at all with sudo on my fresh x86-64 Arch install, it prints out this error:
sudo: unable to open /etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting
sudo: unable to initialize policy plugin
This is on a fresh Arch install from the core Image CD, packages initially installed from the CD and then upgraded with #pacman -Syu. I can edit sudoers just fine with visudo, and installing outdated versions of sudo produce the same error. File permissions on both /usr/bin/sudo and /etc/sudoers both look as they should be. Also, users and user groups don't seem to be an issue.
Found this related StackExchange thread and here are the outputs of strace and ltrace if anyone can interpret them: http://unix.stackexchange.com/questions … most-files
Ltrace:
# ltrace -u notthemessiah sudo true 2>&1 | egrep '(sudo|stat|set.*[ug].*id)'
bindtextdomain("sudo", "/usr/share/locale") = "/usr/share/locale"
textdomain("sudo") = "sudo"
strlen("sudo") = 4
memcpy(0x01c6f299, "sudo", 4) = 0x01c6f299
fopen("/etc/sudo.conf", "r") = 0
__xstat(1, "/usr/lib/sudoers.so", 0x7fff6b0913d0) = 0
dlopen("/usr/lib/sudoers.so", 257) = 0x01c6f630
dlsym(0x01c6f630, "sudoers_policy") = 0x7f33e2f96960
__xstat(1, "/usr/lib/sudoers.so", 0x7fff6b0913d0) = 0
dlopen("/usr/lib/sudoers.so", 257) = 0x01c6f630
dlsym(0x01c6f630, "sudoers_io") = 0x7f33e2f969c0
fputs("sudo", 0x7f33e35296e0sudo) = 1
fputs("unable to open /etc/sudoers", 0x7f33e35296e0unable to open /etc/sudoers) = 1
fputs("sudo", 0x7f33e35296e0sudo) = 1
fputs("no valid sudoers sources found, "..., 0x7f33e35296e0no valid sudoers sources found, quitting) = 1
fputs("sudo", 0x7f33e35296e0sudo) = 1
+++ exited (status 1) +++
Strace:
# strace -u notthemessiah sudo true 2>&1 | egrep '(sudo|set.*[ug].*id)'
execve("/usr/bin/sudo", ["sudo", "true"], [/* 22 vars */]) = 0
open("/etc/sudo.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
stat("/usr/lib/sudoers.so", {st_mode=S_IFREG|0755, st_size=185352, ...}) = 0
open("/usr/lib/sudoers.so", O_RDONLY) = 3
stat("/usr/lib/sudoers.so", {st_mode=S_IFREG|0755, st_size=185352, ...}) = 0
open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/sudoers.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US.utf8/LC_MESSAGES/sudoers.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US/LC_MESSAGES/sudoers.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.UTF-8/LC_MESSAGES/sudoers.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.utf8/LC_MESSAGES/sudoers.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en/LC_MESSAGES/sudoers.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
lstat("/etc/sudoers", {st_mode=S_IFREG|0440, st_size=2849, ...}) = 0
setresgid(4294967295, 0, 4294967295) = 0
setresuid(0, 1, 4294967295) = 0
open("/etc/sudoers", O_RDONLY) = -1 EACCES (Permission denied)
setresuid(4294967295, 0, 4294967295) = 0
write(2, "sudo", 4sudo) = 4
write(2, "unable to open /etc/sudoers", 27unable to open /etc/sudoers) = 27
setresuid(4294967295, 1, 4294967295) = 0
setresgid(4294967295, 0, 4294967295) = 0
setresuid(4294967295, 0, 4294967295) = 0
setresuid(1000, 0, 4294967295) = 0
setresgid(1000, 1000, 1000) = 0
write(2, "sudo", 4sudo) = 4
write(2, "no valid sudoers sources found, "..., 40no valid sudoers sources found, quitting) = 40
open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US.utf8/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.UTF-8/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.utf8/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
write(2, "sudo", 4sudo) = 4

No, I used visudoers and everything relating to that correctly. It's just probably something that happened while installing the core packages from the install CD that caused problems. As of now, I just reinstalled Arch on a new partition (this was a fairly fresh install) and it seems to work just fine. I was willing to continue to test the issue, but resizing the partition seems to have corrupted it somehow.

Unable to call OUI

Hi,
Details
OS: Windows
I alredy installed oracle s/w and database also. Due to some nwk issue i've done system restore. Now i am unable to see Oracle10 in Windows start button. I thought it has gone and i am trying to install again but i am unable to call. my folder located in E:\oracle\10.2.0.1\product\db_1.
so please tell me how to install oracle software.
Thanks

873393 wrote:
Hi,
Details
OS: Windows
I alredy installed oracle s/w and database also. Due to some nwk issue i've done system restore. Now i am unable to see Oracle10 in Windows start button. I thought it has gone and i am trying to install again but i am unable to call. my folder located in E:\oracle\10.2.0.1\product\db_1.
so please tell me how to install oracle software.
Thanksi am unable to understand your question.
are you unable to run oracle setup.exe file or unable to select the folder E:\oracle to install oracle software?
is it possible to create any file under the Drive E:\?

Unable to call skype to skype

First of all, Ive been trying for two days to get help with no success. I have been unable to call skype to skype for several weeks why? I have no problem calling from my tablet to my family's land line why is this happening

Up and running now on mobile. THANK YOU for resolving the issue.

Unable to call from my skype out account

Hi!
Iam unable to call from my skype out account to india, but i can able to call skype to skype users.pls advice.otherwise pls advice how to cancel the membership and get my money back.
Regards
Rajan

Contact your carrier.

Unable to call a web service from BPEL Project

I am running my BPEL PM on Windows XP SP3. The platform is weblogic 9.2, SOA 10.1.3.1.
I created a simple BPEL project to call a web service and when I run the project from BPELConsole I getting the following error:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. )
I am able to call this web service from soapUI client.
Any help or hint is appreciated.
Thanks

I have had this issue before when calling a .NET service, it was firewall related. I didn't actually make the fix so I can't tell you exactly how it was fixed on the server. I hope this info makes sense as this this the info I got from the IT boys
I’ve install this tool on your computer:
http://www.microsoft.com/downloads/details.aspx?FamilyID=05C2C932-B15A-4990-B525-66380743DA89&displaylang=en
which does that:
Firewall Client for ISA Server can be optionally installed on client computers protected by Microsoft ISA Server. Firewall Client for ISA Server provides enhanced security, application support, and access control for client computers. It provides authentication for Winsock applications that use TCP and UDP, supports complex secondary protocols, and supplies user and application information to the ISA Server logs.
When a client computer running Firewall Client for ISA Server makes a request, the destination is evaluated by the Firewall Client software, and external requests are directed to the ISA Server computer for handling. No specific routing infrastructure is required. Firewall Client sends user information transparently with each request, enabling you to create a firewall policy on the ISA Server computer with rules that use the authentication credentials presented by the client. ISA Server allows you to configure automatic discovery for Firewall client computers, using a WPAD entry in DNS or DHCP to obtain correct Web proxy settings for clients, depending on their location.
and I’ve added a exception in IE to the tools-lan settings-advanced-exceptions to be creditworks.* Did this by modifying the GPO that applies to your account, so all the users in National Office should have that exception.
hope you can use this.
cheers
James

Soap / WS Receiver unable to call web service.

Dear All,
We are using PI 7.1 without EHP1
I am unable to call a web service from SOAP/WS adapter. The scenario is HTTP to SOAP/WS.
The web service is hosted on a decentral adapter engine(JPR) put on seperate logical system. The web service hosted on the decentral adapter engine needs to be called by Integration server. This web service call is required to execute a java call(RMI) for third party system.
Http post----
>Integration Server -
>JPR(decenteral adapter engine)
Following are the steps to configure web service.
1. Import service interface from Enterprise service repository in NWDS
2. Generate bean skeleton
3. Deploy the service on JPR
4. Configure End point from Web service Administrator
Following is the Soap configuration that i have done
1. Transport protocol - HTTP
2. Soap protocol- Soap 1.1
3. Target URL--http://<host>:<port>/sapws/com.sap/WmsItemEAR_WmsItem_EJB_WmsItemImplBean/WmsItem/WmsItem_Port?wsdl&mode=ws_policy
when I try the WSDL Url in the browser I get an xml file.
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://test/nitin/service" xmlns:b0="http://test/nitin/service/WmsItem_PortBindingNS"><import namespace="http://test/nitin/service/WmsItem_PortBindingNS" location="http:/<host>:50000/sapws/com.sap/WmsItemEAR_WmsItem_EJB_WmsItemImplBean/WmsItem/WmsItem_Port?wsdl=binding&mode=ws_policy"/><service name="WmsItem"><port name="WmsItem_Port" binding="b0:WmsItem_WmsItem_PortBinding"><address xmlns="http://schemas.xmlsoap.org/wsdl/soap/" location="http://<host>:50000/sapws/com.sap/WmsItemEAR_WmsItem_EJB_WmsItemImplBean/WmsItem/WmsItem_Port"/></port></service></definitions>
Please let me know what may be going wrong or missing to complete the configuration.
Warm regards
Nitin

Mike,
I updated the 3 xml files with the name and password and I get a different error now ...
WARNING: Unable to connect to URL: https://dssd001.ca.boeing.com:443/bartinterface/SOAP/resSetup.cgi due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: X509CertChainIncompleteErr
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: X509CertChainIncompleteErr
I am using the simple text based username auth, but jdev for some reason still goes and looks for the x509 cert? How did you get yours to work?
Thanks
Sriram

Unable to call a Web Services via UTL_DBWS

Hi all,
I create with Apex 3.1 a web service (it works)
Now i need to use the UTL_DBWS package to access a web services from PL/SQL
So i get the Name 'WebServiceDemo', the URL 'http://my_url' and the Target Namespace 'http://my_target'
from the web service reference to build PL/SQL process
The operation 'Login' has two input parameters (username as string, password as string - nullable)
and one ouput parameter (sessionId as string)
When i run the following source code, i get an error
ORA-29532: javax.xml.rpc.soap.SOAPFaultException: Well-formedness violation
Oracle 10.2.0.4
What am i doing wrong?
Any help is appreciated,
Thanks
Grégory
Here is my code :
DECLARE
   service_            UTL_DBWS.service;
   call_               UTL_DBWS.CALL;
   service_qname       UTL_DBWS.qname;
   port_qname          UTL_DBWS.qname;
   operation_qname     UTL_DBWS.qname;
   string_type_qname   UTL_DBWS.qname;
   retx                ANYDATA;
   retx_string         VARCHAR2 (100);
   retx_len            NUMBER;
   params              UTL_DBWS.anydata_list;
BEGIN
   service_qname := UTL_DBWS.to_qname (NULL, 'WebServiceDemo');
   service_ := UTL_DBWS.create_service (service_qname);
   port_qname := UTL_DBWS.to_qname (NULL, 'WebServiceDemo');
   -- target --
   operation_qname := UTL_DBWS.to_qname ('http://my_target', 'Login');
   call_ := UTL_DBWS.create_call (service_, port_qname, operation_qname);
   -- URL --
   UTL_DBWS.set_target_endpoint_address
      (call_,
       'http://my_url'
   string_type_qname :=
              UTL_DBWS.to_qname ('http://www.w3.org/2001/XMLSchema', 'string');
   UTL_DBWS.ADD_PARAMETER (call_,
                           'name',
                           string_type_qname,
                           'ParameterMode.IN'
   UTL_DBWS.set_return_type (call_, string_type_qname);
   params (0) := ANYDATA.convertvarchar2 ('my_login');
   retx := UTL_DBWS.invoke (call_, params);
   retx_string := retx.accessvarchar2;
END;

I have had this issue before when calling a .NET service, it was firewall related. I didn't actually make the fix so I can't tell you exactly how it was fixed on the server. I hope this info makes sense as this this the info I got from the IT boys
I’ve install this tool on your computer:
http://www.microsoft.com/downloads/details.aspx?FamilyID=05C2C932-B15A-4990-B525-66380743DA89&displaylang=en
which does that:
Firewall Client for ISA Server can be optionally installed on client computers protected by Microsoft ISA Server. Firewall Client for ISA Server provides enhanced security, application support, and access control for client computers. It provides authentication for Winsock applications that use TCP and UDP, supports complex secondary protocols, and supplies user and application information to the ISA Server logs.
When a client computer running Firewall Client for ISA Server makes a request, the destination is evaluated by the Firewall Client software, and external requests are directed to the ISA Server computer for handling. No specific routing infrastructure is required. Firewall Client sends user information transparently with each request, enabling you to create a firewall policy on the ISA Server computer with rules that use the authentication credentials presented by the client. ISA Server allows you to configure automatic discovery for Firewall client computers, using a WPAD entry in DNS or DHCP to obtain correct Web proxy settings for clients, depending on their location.
and I’ve added a exception in IE to the tools-lan settings-advanced-exceptions to be creditworks.* Did this by modifying the GPO that applies to your account, so all the users in National Office should have that exception.
hope you can use this.
cheers
James

Unable to call a BPEL Process from ESB

Has anyone worked on Oracle ESB ?
I've implemented an ESB Scenario where, based on some value, either it should call one BPEL process otherwise it should call another BPEL Process. But, Routing Service is unable to call either of the service.
Can anyone help me out?
Thanks in Advance.
Regards

I am able to call the bpel processes from the bpel console. I tried to use the TCP Packet Monitor but it shows waiting for connection and doesn't turn up. I checked the port number. The local server port is correct but I dont know how to check the listener port for it i.e. by default showing 1234.
I tried to test my esb through em as a webservice but it shows the following exception after input:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:Server</faultcode><faultstring>oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventFatalException: An unhandled exception has been thrown in the ESB system. The exception reported is: "java.lang.Exception: Failed to create "ejb/collaxa/system/DeliveryBean" bean; exception reported is: "javax.naming.NamingException: Lookup error: javax.naming.AuthenticationException: Not authorized; nested exception is:
 javax.naming.AuthenticationException: Not authorized [Root exception is javax.naming.AuthenticationException: Not authorized]
 at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:64)
 at javax.naming.InitialContext.lookup(InitialContext.java:351)
 at com.oracle.bpel.client.util.BeanRegistry.lookupDeliveryBean(BeanRegistry.java:279)
 at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:250)
 at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:83)
 at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:67)
 at oracle.tip.esb.server.service.impl.bpel.BPELService.processBusinessEvent(Unknown Source)
 at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source)
 at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source)
 at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source)
 at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source)
 at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source)
 at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source)
 at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source)
 at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source)
 at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source)
 at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source)
 at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source)
 at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(Unknown Source)
 at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(Unknown Source)
 at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:869)
 at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
 at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:460)
 at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
 at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
 at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
 at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
 at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
 at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
 at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
 at java.lang.Thread.run(Thread.java:595)
I've setup the trackable fields also but trackable data showed me no data. When I checked the validate check box, it has shown me error in first stage i.e. in file adapter itself.
I don't know what's the problem?
Please help as I am struggling with this.
Thanks & Regards

Complicated Issue - Unable to Call # etc

Similar Messages

Maybe you are looking for