Complicated kf
Dear Gurus,
I have complicated KFs that are derived at query runtime.
I need these KFs into a new cube.
As the new cube is also loading from various other cubes, I like to use the query results of the complicated KFs cube to export as source for the new cube so that I need not derive the complicated KF.
I tried the standard ways of rscrm_bapi but it seems that the batch job never starts due to delays and warnings about invalid Keyfigure even though my Keyfigure used for testing is a simple one.
Is it true that this feature is no longer supported in BW3.1C?
If I were to only export to table inside BW and not exporting to external systems, do I still need additional license? For purpose of testing, can I still use this feature without buying the license until I am sure this is what is needed? Is my errors due to licensing?
Can Open Hub BAdi transformation be used to perform calculation on the keyfigures? Seems that only characteristics are avail for selection. How can the keyfigures be referenced in codes in BAdi?
Many thanks!
Suzie Fernando
Hello Suzie,
Using Infospoke you should be able to export it to flatfile and Database tables. I am not sure of licence though as for flat file it won't be require but for database file i am not sure, wait for more comments from experts.
This may help you.......
take a look
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/03853c01c89d7ce10000000a11405a/frameset.htm
and about BADI
http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm
Business Add-Ins (BAdIs) are enhancements to the standard version. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery.
Rgds,
San.
Similar Messages
-
New Calculated field question. Complicated I think.
I have managed to create this table from a MySQL database: http://ppbm5.com/DB-PPBM5.php
The field 'Total' is a calculated field using this SQL query:
$query_Recordset1 = 'SELECT *, `Disk I/O`+`MPEG2-DVD`+`H264-BR`+IFNULL(`MPE On`,`MPE Off`) As Total, `CPU`*`Cores` As Phys_Cores FROM `Personal_data` WHERE 1 ORDER BY (`Disk I/O`+`MPEG2-DVD`+`H264-BR`+IFNULL(`MPE On`,`MPE Off`)), `Date & Time` ASC';
So far, so good, but as you may have noticed, there is a next field called 'Rel. Perf.' which only contains blanks. And that is where my problems start.
The table is sorted by 'Total' and the first record shows these figures and field names that are relevant for my question:
Fields: 'Total' 'Disk I/O' 'MPEG2-DVD' 'H.264-BR' 'MPE On' 'MPE Off'
Values: 131, 67, 21, 37, 6, 64
In addition, I use four 'weight' figures, let's say these are 0.27 , 0.30 , 0.20 and 0.23 denoted as W1, W2, W3, W4.
First step is to calculate four temp values, using a formula like this resulting in T1, T2, T3 and T4:
T1 = W1 x Total /Disk I/O; T2 = W2 x Total/MPEG2-DVD ; T3 = W3 x Total/H.264-BR ; T4 = W4 x Total/(IFNULL(MPE On, MPE Off)
Note that this only applies to the top record and here the SUM(T1, T2, T3, T4) results in 131, equal to the Total.
The result of 100 x SUM(T1, T2, T3, T4)/ Total = 100 should be the 'Rel.Perf.' result for the top record.
Now is gets difficult. Let me call the records R1, R2, R3, ..., Rx. Now, in the previous step we have established that the figure 100 should into R1.
For R2 the result of the 'Rel.Perf.' is 100 x SUM(T1 x Disk I/O(2), T2 x MPEG2-DVD(2), T3 x (H.264-BR(2), T4 x (IFNULL(MPE on, MPE Off)))/ Total(2)
For R3 the result of the 'Rel.Perf.' is 100 x SUM(T1 x Disk I/O(3), T2 x MPEG2-DVD(3), T3 x (H.264-BR(3), T4 x (IFNULL(MPE on, MPE Off)))/ Total(3)
etcetera for all the rest of the records in the table.
A complicating factor is that the reference point of the top machine should remain fixed at 100, but when doing queries, the top machine may not be in the query results, but all the query results for the Rel.Perf. should be derived from these scores. Life would be infinitely easier if one would be certain that the top machine is fixed, but that is not the case.
Sorry to make this such a long and complicated post, but for those who have struggled through this long message, if you have any suggestions on how to make this work, I would appreciate it.
Thanks in advance.
Harm, while non is intended.
PS. I have been trying to generate a SQL query, using the following code:
$query_Recordset1 = 'SELECT *, FORMAT(`Disk I/O`+`MPEG2-DVD`+`H264-BR`+IFNULL(`MPE On`,`MPE Off`),0) As Total, FORMAT((54.661*`Disk I/O`+161.25*`MPEG2-DVD`+71.66666*`H264-BR`+645*IFNULL(`MPE On`,`MPE Off`))/129,1) As RPI,`CPU`*`Cores` As Phys_Cores FROM `Personal_data` WHERE 1 ORDER BY 54.661*`Disk I/O`+161.25*`MPEG2-DVD`+71.66666*`H264-BR`+645*IFNULL(`MPE On`,`MPE Off`), `Disk I/O`+`MPEG2-DVD`+`H264-BR`+IFNULL(`MPE On`,`MPE Off`) ASC';
For static work it is OK, but not when a new top performer submits his data.Hi William,
Per my understanding that you want to count the number of the value in the field wait which is smaller then 15, right?
I have tested on my local environment and that you can add the calculated field (Count) using the expression as below:
=IIF(Fields!wait.Value<15,1,0)
Insert an outside group row and then get the total count by using below expression:
=SUM(Fields!Count.Value)
Preview you will get the result like below:
If your problem stil exists, please try to provide some sample data and the exprect count result you want.
Any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for hours. Seems very complicated and cumbersome. Can anyone help? It's got to be much quicker (fewer key strokes) and simpler than what I've been able to discover.
Open the file, parse it, populate an ArrayCollection or XMLListCollection, and make the collection the DataGrid dataProvider:
http://livedocs.adobe.com/flex/3/html/help.html?content=Filesystem_08.html
http://livedocs.adobe.com/flex/3/html/help.html?content=12_Using_Regular_Expressions_01.ht ml
http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/ArrayCollection.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/XMLListCollection.html
If this post answered your question or helped, please mark it as such. -
Photostream overly complicated, can't save photos to Camera Roll
For those of us who like to manage our photos manually, why is it so overly complicated to manage images between Photostream and Camera Roll?
First, I just want to save photos from my old iPhone, which I added to from iPhoto to my Photostream because it seemed to be the only way, to my Camera Roll. This is not possible though. When I go to Photostream and select photos then select "Add To" it shows Camera Roll but it does not allow me to select Camera Roll and add them. The only option I can select is to create a new album within Photostream. If I just select an image in Photostream and then hit the share button, it also does not give me a save to Camera Roll option.
I only want to use the Camera Roll, yet even with Photostream turned off, photos I take on my iPhone still show up in the Photostream.
I just don't understand why this is so complicated. I've seen forum discussions that say it's easy to save Photostream photos to Camera Roll, but I've tried every way mentioned but it never gives me the option of saving to Camera Roll.
Help please. Thanks.Create an album for your old photos. Connect your phone to iTunes on your computer. On the phone's summary page tap the Photos tab. Check the Sync photos from checkbox. Click the button next to the checkbox. Navigate to the folder on your computer where the pictures are located. Add them to your album.
Doing this in reverse is the only way to get these pictures back off your phone.
I agree iCloud / Photostream for photos is way to complicated and useless, but it is locked down to keep people from trying to use it to share commercial videos and music via the shared photostream. At least that is my guess. -
Idk why i made my password complicated, but i did and now i cant unlock it! help!
Well, i had a fit and decided to change my code from simple to complicated. Being that i was mad, i just put a long, emphasizing long, passcode, but when i cooled down i didnt remember what it was! I tried at least 6 tmes to unlock it while it was still locked.. i failed miserably, but luckily, i had it unlocked (at the time). So, i changed it from auto lock 1 min to autolock never. Stupid of me to think that that would solve anything.. So im reading catching fire, and i click the top button, force of habbit, and put it in my pocket so i can get a drink of juice. i sit down to open my phone and continue reading and it tells me its locked! I tried every password i could think of! I've been trying to figure this out for at least 6 hours! i dont want to restore it because its going to take away all my text messages and i have over 30, 13 before i locked the stupid phone and the rest after! Besides, if i restore it, i'll lose my page in my book, and i totally dont wanna do that since its such a hassle to skip continuously page by page until i find where i was at. what about my contacts? i get new ones all the time and i would hate to lose them all! do you think, maybe.. possibly.. theres anyway that apple can tell me my passcode? My phone is registered to my account and its on this computer, do you think that they could possibly understand my stupid mistake and unlock it for me? not to mention the music and the apps! Oh gosh, i have a headache just thinking about the apps and the music! just ugh! i really hope that they can.. i've been using siri to call people and text people for me, but she wont read the book to me! its painful to hear all those text messages coming through but not being able to see one! When i ask siri to please read my unread text messages, she says i have NONE! maybe she says it just to protect my privacy, but i dont care! Now i'm thinking i shouldnt have changed it so i wouldnt be able to see the banner for my text! At least i couldve read them and replied! Gosh, my life *****.. Sigh..
... do you think, maybe.. possibly.. theres anyway that apple can tell me my passcode?
No. They don't know it. Siri knows but she is sworn to secrecy.
If you synced your phone with iTunes you will only have lost whatever you did since. Your apps are fine.
If you cannot remember its passcode you will need to restore the iPhone using the computer with which it was last synced. This allows you to reset your passcode and resync the data from the computer, or restore the device from a backup.
Refer to Updating and restoring iPhone, iPad and iPod touch software.
iOS: Wrong passcode results in red disabled screen
iOS: Unable to update or restore -
I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it at all. I want to come back to the previous version. why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever. It make me think of when ericsson got sold to Sony....drastic PC change.
I would like to have simple instruction on how to downgrade.
It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
HELP!iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB
-
Complicated problem: Laggy Macbook Pro, now not booting
I am facing a very complicated issue with my unibody Early 2011 15" Macbook Pro (2.2 ghz core i7, 4gb 1333mhz ram, amd radeon 6750m, if you need hardware details).
I guess the issue started after my computer started to get laggy for no reason at all: it was never the GUI that lagged, but whenever I would perform some data-dependent tasks such as playing a video, or trying to open a big file. This lagging did coincide with some of my friends playing around with magnets around my computer (which may have possibly corrupted hard disk data).
After it got laggy, another major problem hit my MacBook, where I plugged in an old, broken USB into one of the ports by accident, and the computer suddenly shut it self off. The computer then seemed to have no power at all, with no response to pressing power button, or the battery indicator button. I feared the worst: that my logic board had been fried, so I immediately took my computer to the Apple Reseller. The technicians there said it was no problem at all, just that my motherboard had shut itself of in order to protect itself from a USB power shortage, and he unplugged and replugged this one small component on the logic board, which I am guessing is the Power Management Unit, and my computer miraculeously started booting.
So then, I get back home, and the laggy problem is still there. I just had to cope with the problem for a few days, until I go back to the Apple Reseller, but then suddenly, after a restart, the computer started not even booting. The grey apple icon would blink, and turn into a circle with a cross icon. Checked online, and this is apparently related to corrupted system files. This is where I began to suspect that the USB shut-off from few days ago, did more damage than the technicians thought: maybe related to the hard disk, or RAM.
But then again, it could have just been a coincidental corrupt hard disk from my actions, so I wiped/repartitioned my hard disk, and restored the OS and my files from a TIme Machine Backup. Again, the problem was still there, so I thought it might be to do with my backed up system files, so I did a fresh install of Lion.
The fresh install of Lion seemed to eliminate all lagging problems, but after I started copying my files and installing applications from Time Machine, the lagging problem gradually returned. So another question arose, was it a faulty hard disk, or a corrupt file or application that was making it laggy? To check if it was my hard disk, I did a zero-over erase of the entire disk with Disk Utility, and sure enough, the writing process failed in the middle.
After thinking I zeroed in on the problem, I replaced the hard disk in my Macbook Pro with another 750gb Toshiba SATA drive, and did a clean install of Lion. Once again, the laggy problem was gone, but just like the old hard disk, the laggy problem returned after I started copying files over and installing applications. Switching applications would take forever, and accessing folders on my hard disk would also be laggy. Playing videos was impossible, but the GUI (dock, spaces, etc) were all very responsive.
Now, I thought the problem is either with faulty RAM, or my hard disk reader is broken (since two hard disks, although the original one was faulty, both failed). I read online that the Apple Hardware Test (AHT) can help identify and pinpoint hardware problems, so I inserted the 2nd disk that came with my computer (Applications Install), and pressed D, but then nothing came up. After countless attempts, I maybe thought it was the wrong disk, so I inserted the 1st disk (OS Installer), and held D while booting, but still, AHT would not load.
After countless attempts at loading AHT, all of which led to me forcing shut down/holding power button after seeing the Apple logo, brings the problem to where I am at now: my Macbook does not boot into the login screen. After the Apple logo, and the spinner wheel have appeared, the screen turns white and the display becomes an infinite loop of switching from a gray color, to a white color.
This problem is frustrating me very much, because there are so many possible causes, and the problem persists even after reinstalling the OS, and even replacing the ard drive. The logic board shutoff could be the cause, but then again, the lagging problem started way before it happened. Somebody please tell me what is the problem, and what I should do? Thanks in advance.novaria wrote:
Didn't know my magnets were strong enough to corrupt hard disks.
Yes, it's a method used to destroy data on a hard drive as it's recorded using magnetic fields, either "on" or "off" to represent the 1's and 0's that make up the basic building blocks of your data.
But, the magnet does not explain why the hard disk reported an error when being erased with zero-over option.
When the driver software has a problem reading the data on the drive, it assumes it's a bad sector, then maps it off and uses a spare. You likely ran out of spares.
I just tried zero-over erasing the second, good hard disk that replaced the original, but again, it fails. Is this a common problem with the zero erase option?
No.
or is it something to do with my hard disks, or some sort of damaged hardware in my computer?
Well this is drive #2 and it's new, and you get the same problem.
It's either something your doing, (like moving the hard drive/ computer while it's operating thus the heads are striking the platters) or it's a hardware defect, or perhaps the magnets did other damage we can't see, perhaps it's magnatized the computer and that's affecting the hard drive or electronics.
May be a loose or defective cable.
It's time for a hardware evaluation at this point. -
How complicated is it to implement Robohelp Server for multiple authors?
I am presently the lone techical writer in my company and I use Robohelp HTML V8 to generate WebHelp for our software. The RH software has been upgraded from an original V5 Robohelp full license, to a V7 upgrade and then a V8 upgrade.
I am investigating the use of Robohelp Server to open the possibility of adding another author, and would like to know how complicated it is. Do we still need to buy two seat licenses for Robohelp V9 as well as Robohelp Server V9, or are they included with the Server license? Also, are there any concerns for upgrading V8 project to V9?
If this information is already covered somewhere in the forums, please feel free to point me in that direction. I have not been able to find it myself. Thanks in advance!Hi Sheryl
Indeed what you likely want is some form of source control. And certainly, splitting the project up and making different folks "captain of their own ship", is one way to roll.
But it sounds like you may have either misunderstood or had the RoboSource control misconfigured. With any source control system, the way it usually works is by storing all the content on the server in the source control database. But for each client connecting to the database, you establish what is called a "Working Folder". And that is usually on each local PC. When you check files out, they are copied to the working folder. So you work locally, but the application handles copying them back and forth to and from the server as you work. That way, you shouldn't be seeing performance issues.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
I need a solution of this complicated problem to finalize my final project
Introduction
This project revolves around an important text processing task, text compression. In particular, you will be required to encode a sequence of words read from a source file into binary strings (using only the characters 0 and 1). It is important to note that text compression makes it possible to minimize the time needed to transmit text over a low-bandwidth channel, such as infrared connection. Moreover, text compression is helpful in storing large documents more efficiently. The coding scheme explored in this project is the Huffman Coding Scheme. While standard encoding schemes, such as Unicode and ASCII, use fixed-length binary strings to encode characters, Huffman coding assigns variable-length codes to characters. The length of a Huffman code depends on the relative frequency of its associated character. Specifically, Huffman coding capitalizes on the fact that some characters are used more frequently than others to use short codewords when encoding high-frequency characters and long codewords to encode low-frequency characters. Huffman coding saves space over state of the art fixed-length encoding and is therefore at the heart of file compression techniques in common use today. Figure 1 shows the relative frequencies of the letters of the alphabet as they appear in a representative sample of English documents.
Letter Frequency Letter Frequency
A 77 N 67
B 17 O 67
C 32 P 20
D 42 Q 5
E 120 R 59
F 24 S 67
G 17 T 85
H 50 U 37
I 76 V 12
J 4 W 22
K 7 X 4
L 42 Y 22
M 24 Z 2
Figure 1. Relative frequencies for the 26 letters of the alphabet.
Huffman coding and decoding
Huffman’s algorithm for producing optimal variable-length codes is based on the construction of a binary tree T that represents the code. In other words, the Huffman code for each character is derived from a full binary tree known as the Huffman coding tree, or simply the Huffman tree. Each edge in the Huffman tree represents a bit in a codeword, with each edge connecting a node with its left child representing a “0” and each edge connecting a node with its right child representing a “1”. Each external node in the tree is associated with a specific character, and the Huffman code for a character is defined by the sequence of bits in the path from the root to the leaf corresponding to that character. Given codes for the characters, it is a simple matter to use these codes to encode a text message. You will have simply to replace each letter in the string with its binary code (a lookup table can be used for this purpose).
In this project, you are not going to use the table given in Figure 1 to determine the frequency of occurrence per character. Instead, you will derive the frequency corresponding to a character by counting the number of times that character appears in an input file. For example, if the input file contains the following line of text “a fast runner need never be afraid of the dark”, then the frequencies listed in the table given in Figure 2 should be used per character:
Character a b d e f H i k n O r s t u v
Frequency 9 5 1 3 7 3 1 1 1 4 1 5 1 2 1 1
Figure 2. The frequency of each character of the String X.
Based on the frequencies shown in Figure 2, the Huffman tree depicted in Figure 3 can be constructed:
Figure 3. Huffman tree for String X.
The code for a character is thus obtained by tracing the path from the root of the Huffman tree to the external node where that character is stored, and associating a left edge with 0 and a right edge with 1. In the context of the considered example for instance, the code for “a” is 010, and the code for “f” is 1100.
Once the Huffman tree is constructed and the message obtained from the input file has been encoded, decoding the message is done by looking at the bits in the coded string from left to right until all characters are decoded. This can be done by using the Huffman tree in a reverse process from that used to generate the codes. Decoding the bit string begins at the root of the tree. Branches are taken depending on the bit value – left for ‘0’ and right for ‘1’ – until reaching a leaf node. This leaf contains the first character in the message. The next bit in the code is then processed from the root again to start the next character. The process is repeated until all the remaining characters are decoded. For example, to decode the string “0101100” in the case of the example under study, you begin at the root of the tree and take a left branch for the first bit which is ‘0’. Since the next bit is a ‘1’, you take a right branch. Then, you take a left branch (for the third bit ‘1’), arriving at the leaf node corresponding to the letter a. Thus, the first letter of the coded word is a. You then begin again at the root of the tree to process the fourth bit, which is a ‘1’. Taking 2 right branches then two left branches, you reach the leaf node corresponding to the letter f.
Problem statement
You are required to implement the Huffman coding/decoding algorithms. After you complete the implementation of the coding/decoding processes, you are asked to use the resulting Java code to:
1. Read through a source file called “in1.dat” that contains the following paragraph:
“the Huffman coding algorithm views each of the d distinct characters of the string X as being in separate Huffman trees initially with each tree composed of a single leaf node these separate trees will eventually be joined into a single Huffman tree in each round the algorithm takes the two binary trees with the smallest frequencies and merges them into a single binary tree it repeats this process until only one tree is left.”
2. Determine the actual frequencies for all the letters in the file.
3. Use the frequencies from the previous step to create a Huffman coding tree before you assign codes to individual letters. Use the LinkedBinaryTree class that we developed in class to realize your Huffman coding trees.
4. Produce an encoded version of the input file “in1.dat” and then store it in an output file called “out.dat”.
5. Finally, the decoding algorithm will come into play to decipher the codes contained in “out.dat”. The resulting decoded message should be written to an output file called “in2.dat”. If nothing goes wrong, the text stored in “in1.dat” and the one in “in2.dat” must match up correctly.jschell wrote:
I need a solution of this complicated problem to finalize my final project The solution:
1. Write code
2. Test code3. If test fails, debug code, then go to step 2. -
Transferring Aperture from my Macbook Pro 5,5 to a new MacBook looks complicated. If I purchasea new, updated Aperture, can I open my old vault on an external disk in the new Mac?
Mac OS X 10.7 Help: Troubleshoot a network printer
-
How can I use XStream to persist complicated Java Object to XML & backward
Dear Sir:
I met a problem as demo in my code below when i use XTream to persist my Java Object;
How can I use XStream to persist complicated Java Object to XML & backward??
See
[1] main code
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
import java.util.ArrayList;
import com.thoughtworks.xstream.XStream;
import com.thoughtworks.xstream.io.xml.DomDriver;
public class PhoneList {
ArrayList<PhoneNumber> phones;
ArrayList<Person> person;
private PhoneList myphonelist ;
private LocationTest location;
private PhoneList(String name) {
phones = new ArrayList<PhoneNumber>();
person = new ArrayList<Person>();
public ArrayList<PhoneNumber> getphones() {
return phones;
public ArrayList<Person> getperson() {
return person;
public void addPhoneNumber(PhoneNumber b1) {
this.phones.add(b1);
public void removePhoneNumber(PhoneNumber b1) {
this.phones.remove(b1);
public void addPerson(Person p1) {
this.person.add(p1);
public void removePerson(Person p1) {
this.person.remove(p1);
public void BuildList(){
location = new LocationTest();
XStream xstream = new XStream();
myphonelist = new PhoneList("PhoneList");
Person joe = new Person("Joe, Wallace");
joe.setPhone(new PhoneNumber(123, "1234-456"));
joe.setFax(new PhoneNumber(123, "9999-999"));
Person geo= new Person("George Nixson");
geo.setPhone(new PhoneNumber(925, "228-9999"));
geo.getPhone().setLocationTest(location);
myphonelist.addPerson(joe);
myphonelist.addPerson(geo);
public PhoneList(){
XStream xstream = new XStream();
BuildList();
saveStringToFile("C:\\temp\\test\\PhoneList.xml",convertToXML(myphonelist));
public void saveStringToFile(String fileName, String saveString) {
BufferedWriter bw = null;
try {
bw = new BufferedWriter(
new FileWriter(fileName));
try {
bw.write(saveString);
finally {
bw.close();
catch (IOException ex) {
ex.printStackTrace();
//return saved;
public String getStringFromFile(String fileName) {
BufferedReader br = null;
StringBuilder sb = new StringBuilder();
try {
br = new BufferedReader(
new FileReader(fileName));
try {
String s;
while ((s = br.readLine()) != null) {
// add linefeed (\n) back since stripped by readline()
sb.append(s + "\n");
finally {
br.close();
catch (Exception ex) {
ex.printStackTrace();
return sb.toString();
public String convertToXML(PhoneList phonelist) {
XStream xstream = new XStream(new DomDriver());
xstream.setMode(xstream.ID_REFERENCES) ;
return xstream.toXML(phonelist);
public static void main(String[] args) {
new PhoneList();
}[2].
import java.io.Serializable;
import javax.swing.JFrame;
public class PhoneNumber implements Serializable{
private String phone;
private String fax;
private int code;
private String number;
private String address;
private String school;
private LocationTest location;
public PhoneNumber(int i, String str) {
setCode(i);
setNumber(str);
address = "4256, Washington DC, USA";
school = "Washington State University";
public Object getPerson() {
return null;
public void setPhone(String phone) {
this.phone = phone;
public String getPhone() {
return phone;
public void setFax(String fax) {
this.fax = fax;
public String getFax() {
return fax;
public void setCode(int code) {
this.code = code;
public int getCode() {
return code;
public void setNumber(String number) {
this.number = number;
public String getNumber() {
return number;
public void setLocationTest(LocationTest bd) {
this.location = bd;
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(location);
f.getContentPane().add(location.getControls(), "Last");
f.setSize(400,400);
f.setLocation(200,200);
f.setVisible(true);
public LocationTest getLocationTest() {
return location;
}[3].
package test.temp;
import java.io.Serializable;
public class Person implements Serializable{
private String fullname;
@SuppressWarnings("unused")
private PhoneNumber phone;
@SuppressWarnings("unused")
private PhoneNumber fax;
public Person(){
public Person(String fname){
fullname=fname;
public void setPhone(PhoneNumber phoneNumber) {
phone = phoneNumber;
public void setFax(PhoneNumber phoneNumber) {
fax = phoneNumber;
public PhoneNumber getPhone() {
return phone ;
public PhoneNumber getFax() {
return fax;
public String getName() {
return fullname ;
public void setName(String name) {
this.fullname = name;
public String toString() {
return getName();
}[4]. LocationTest.java
package test.temp;
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class LocationTest extends JPanel implements ChangeListener
Ellipse2D.Double ball;
Line2D.Double line;
JSlider translate;
double lastTheta = 0;
public void stateChanged(ChangeEvent e)
JSlider slider = (JSlider)e.getSource();
String name = slider.getName();
int value = slider.getValue();
if(name.equals("rotation"))
tilt(Math.toRadians(value));
else if(name.equals("translate"))
moveBall(value);
repaint();
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
if(ball == null)
initGeom();
g2.setPaint(Color.green.darker());
g2.draw(line);
g2.setPaint(Color.red);
g2.fill(ball);
private void initGeom()
int w = getWidth();
int h = getHeight();
int DIA = 30;
int padFromEnd = 5;
line = new Line2D.Double(w/4, h*15/16, w*3/4, h*15/16);
double x = line.x2 - padFromEnd - DIA;
double y = line.y2 - DIA;
ball = new Ellipse2D.Double(x, y, DIA, DIA);
// update translate slider values
int max = (int)line.getP1().distance(line.getP2());
translate.setMaximum(max);
translate.setValue(max-padFromEnd);
private void tilt(double theta)
// rotate line from left end
Point2D pivot = line.getP1();
double lineLength = pivot.distance(line.getP2());
Point2D.Double p2 = new Point2D.Double();
p2.x = pivot.getX() + lineLength*Math.cos(theta);
p2.y = pivot.getY() + lineLength*Math.sin(theta);
line.setLine(pivot, p2);
// find angle from pivot to ball center relative to line
// ie, ball center -> pivot -> line end
double cx = ball.getCenterX();
double cy = ball.getCenterY();
double pivotToCenter = pivot.distance(cx, cy);
// angle of ball to horizon
double dy = cy - pivot.getY();
double dx = cx - pivot.getX();
// relative angle phi = ball_to_horizon - last line_to_horizon
double phi = Math.atan2(dy, dx) - lastTheta;
// rotate ball from pivot
double x = pivot.getX() + pivotToCenter*Math.cos(theta+phi);
double y = pivot.getY() + pivotToCenter*Math.sin(theta+phi);
ball.setFrameFromCenter(x, y, x+ball.width/2, y+ball.height/2);
lastTheta = theta; // save theta for next time
private void moveBall(int distance)
Point2D pivot = line.getP1();
// ball touches line at distance from pivot
double contactX = pivot.getX() + distance*Math.cos(lastTheta);
double contactY = pivot.getY() + distance*Math.sin(lastTheta);
// find new center location of ball
// angle lambda = lastTheta - 90 degrees (anti-clockwise)
double lambda = lastTheta - Math.PI/2;
double x = contactX + (ball.width/2)*Math.cos(lambda);
double y = contactY + (ball.height/2)*Math.sin(lambda);
ball.setFrameFromCenter(x, y, x+ball.width/2, y+ball.height/2);
JPanel getControls()
JSlider rotate = getSlider("rotation angle", "rotation", -90, 0, 0, 5, 15);
translate = getSlider("distance from end", "translate", 0, 100, 100,25, 50);
JPanel panel = new JPanel(new GridLayout(0,1));
panel.add(rotate);
panel.add(translate);
return panel;
private JSlider getSlider(String title, String name, int min, int max,
int value, int minorSpace, int majorSpace)
JSlider slider = new JSlider(JSlider.HORIZONTAL, min, max, value);
slider.setBorder(BorderFactory.createTitledBorder(title));
slider.setName(name);
slider.setPaintTicks(true);
slider.setMinorTickSpacing(minorSpace);
slider.setMajorTickSpacing(majorSpace);
slider.setPaintLabels(true);
slider.addChangeListener(this);
return slider;
}OK, My questions are:
[1]. what I generated XML by XSTream is very complicated, especially for object LocationTest, Can we make it as simple as others such as Person object??
[2]. after I run it, LocationTest will popup and a red ball in a panel will dsiplay, after I change red ball's position, I hope to persist it to xml, then when I read it back, I hope to get same picture, ie, red ball stiil in old position, How to do that??
Thanks a lot!!Positive feedback? Then please take this in a positive way: if you want to work on persisting Java objects into XML, then GUI programming is irrelevant to that goal. The 1,000 lines of code you posted there appeared to me to have a whole lot of GUI code in it. You should produce a smaller (much smaller) example of what you want to do. Calling the working code from your GUI program should come later.
-
How to solve a complicated Equation in Numbers?
I have to calculate the solutions of a complicated equation in Numbers. I have tried to find functions that finds the zeros of a expression, or thought of setting up while loops that runs until the error term is almost 0, but I cannot find any such thing. Can anyone help me figure out how I can set this up in Numbers? This is something that can easily be done with a graphing calculator such as TI-83, but I have many inputs that can vary in my spreadsheet.
Thanks.There is no such a feature in Numbers.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (from FRANCE dimanche 1 mars 2009 16:10:52) -
I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)
It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go. -
Complicated Free goods scenario for Beverage
Hi
These are scenario for F&B business - mostly they have complicated promotion on free gifts which I think SAP standard cannot cover it. If any of you has the similar cases, please share how you handle it, thanks.
1. Buy soda water size 10 oz regardless of soda taste for 1 pack (1 pack consist of 24 bottles) then get 1 bottle free.
2. Buy soda water size 10 oz regardless of soda taste for 1 pack, then get 1 bottle free - maximum at 2 sets.
3. Buy soda water either size 10 oz or 15 oz for 1 pack, get 1 bottle of 10 oz free
4. Buy soda water regardless of soda taste as set i.e. for every 36 packs of combine size 10 oz, 15 oz and 1 lt - get free items of 10 oz/15 oz for 2 bottles per pack and free item of 1lt for 1 bottle per pack
5. Similar to 4 with additional condition that 1 soda taste must be more than 50% - for example, it must be coke at least 50%
6. Sales quota - Buy 1 pack, get 1 bottle free - maximum 100 bottles for each customer
Please kindly share your experience or ideas. Thank you
ChanchanaHI Chanchana,
I had a similar problem while configuring Free goods in Ceramic Industry(Sanitaryware division).
For Eg: In the case of wash-basins, basins of different colors are defined as different materials, an the requirement was to
2 Black & 2 red = 1 tap free
or
1 red, 1 white & 1 black = 2 taps free.
We did a lot of R&D considering std SAP free goods scenario, out of which I can conclude the following:
1) Std SAP allows only 1 + 1(Same material, inclusive) or 1 + 1(different material, exclusive) to be configured as free goods.
In your case if the main material and the free goods are defined as two different materials and there is no 3rd material coming into picture only then free goods config will work.
For Eg: For 10qty Material A, 1 qty of material A free - possible
For 10qty of material A, 1qty of material B free - possible
For 10qty of Material A, 5 qty of Material B, 1qty of Material C free- not possible in std SAP.
You can convince this to your client, but if they still insist on having the same, you will have to develop a custom 'Z' application which will control the same. However, the same might turn out to be very complex, since pricing, COGS of the free material has to be taken care of along with a lot of other factors. Also the delivery and billing has to go through std SAP, mapping of which will be complex again.
All the best.
Regards,
Amit
Edited by: Amit Iyer on Sep 20, 2010 10:17 AM -
SQL Query with a little bit more complicated WHERE clause performance issue
Hello, I have some performance issue in this case:
Very simplified query:
SELECT COUNT(*) FROM Items
WHERE
ConditionA OR
ConditionB OR
ConditionC OR ...
Simply I have to determine how many Items the user has access through some complicated conditions.
When there is a large number of records (100,000+) in the Items table and say ~10 complicated conditions concatenated in WHERE clause, I get the result about 2 seconds in my case. The problem is when very few conditions are met, f.e. when I get only
10 Items from 100,000.
How can I improve the performace in this "Get my items" case?
Additional information:
the query is generated by EF 6.1
MS SQL 2012 Express
Here is the main part of the real SQL Execution Plan:Can you post table/index DDL? Query?
Sample query:
exec sp_executesql N'SELECT
[GroupBy1].[A1] AS [C1]
FROM ( SELECT
COUNT(1) AS [A1]
FROM [dbo].[Tickets] AS [Extent1]
LEFT OUTER JOIN [dbo].[Services] AS [Extent2] ON [Extent1].[ServiceId] = [Extent2].[Id]
WHERE (@p__linq__0 = 1) OR ([Extent1].[SubmitterKey] = @p__linq__1) OR ([Extent1].[OperatorKey] = @p__linq__2) OR (([Extent1].[OperatorKey] IS NULL) AND (@p__linq__2 IS NULL)) OR ([Extent1].[SolverKey] = @p__linq__3) OR (([Extent1].[SolverKey] IS NULL) AND (@p__linq__3 IS NULL)) OR ([Extent1].[Incident2ndLineSupportKey] = @p__linq__4) OR (([Extent1].[Incident2ndLineSupportKey] IS NULL) AND (@p__linq__4 IS NULL)) OR ((@p__linq__5 = 1) AND ((1 = CAST( [Extent1].[TicketType] AS int)) OR ((@p__linq__6 = 1) AND (((2 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[IncidentManager] = @p__linq__7) OR (([Extent2].[IncidentManager] IS NULL) AND (@p__linq__7 IS NULL)))) OR ((3 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[ServiceRequestManager] = @p__linq__8) OR (([Extent2].[ServiceRequestManager] IS NULL) AND (@p__linq__8 IS NULL)))) OR ((4 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[ProblemManager] = @p__linq__9) OR (([Extent2].[ProblemManager] IS NULL) AND (@p__linq__9 IS NULL)))) OR ((5 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[ChangeManager] = @p__linq__10) OR (([Extent2].[ChangeManager] IS NULL) AND (@p__linq__10 IS NULL)))))) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceDeputyManagers] AS [Extent3]
WHERE ([Extent1].[ServiceId] = [Extent3].[ServiceId]) AND ( CAST( [Extent3].[TicketType] AS int) = CAST( [Extent1].[TicketType] AS int)) AND ([Extent3].[UserProviderKey] = @p__linq__11)
)))) OR ((2 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsIncidents] = 1) OR ((201 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableIncidentTakeFromQueueAction] <> cast(1 as bit)))) AND ([Extent2].[Incident1stLineSupportLimitedAccess] <> cast(1 as bit))) OR ((3 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsServiceRequests] = 1) OR ((301 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableServiceRequestTakeFromQueueAction] <> cast(1 as bit)))) AND ([Extent2].[ServiceRequestLimitedAccess] <> cast(1 as bit))) OR ((4 = CAST( [Extent1].[TicketType] AS int)) AND ([Extent2].[AllowAccessToOtherOperatorsProblems] = 1) AND ([Extent2].[ProblemLimitedAccess] <> cast(1 as bit))) OR ((5 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsChanges] = 1) OR ((501 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableChangeTakeFromQueueAction] <> cast(1 as bit)))) AND ([Extent2].[ChangeLimitedAccess] <> cast(1 as bit))) OR ((2 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsIncidents] = 1) OR ((201 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableIncidentTakeFromQueueAction] <> cast(1 as bit)))) AND (( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent4]
WHERE ([Extent1].[ServiceId] = [Extent4].[ServiceId]) AND (2 = CAST( [Extent4].[TicketType] AS int)) AND ([Extent4].[UserProviderKey] = @p__linq__12) AND (1 = [Extent4].[SupportLine])
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent5]
WHERE ([Extent5].[UserProviderKey] = @p__linq__13) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent6]
WHERE ([Extent6].[ServiceId] = [Extent1].[ServiceId]) AND (2 = CAST( [Extent6].[TicketType] AS int)) AND (1 = [Extent6].[SupportLine]) AND ([Extent6].[OperatorGroupId] = [Extent5].[OperatorGroupId])
)))) OR ((2 = CAST( [Extent1].[TicketType] AS int)) AND ([Extent1].[IncidentFunctionEscalatedTo2ndLineSupport] = 1) AND ([Extent1].[Incident2ndLineSupportKey] IS NULL) AND (([Extent2].[Incident2ndLineSupportLimitedAccess] <> cast(1 as bit)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent7]
WHERE ([Extent1].[ServiceId] = [Extent7].[ServiceId]) AND (2 = CAST( [Extent7].[TicketType] AS int)) AND ([Extent7].[UserProviderKey] = @p__linq__14) AND (2 = [Extent7].[SupportLine])
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent8]
WHERE ([Extent8].[UserProviderKey] = @p__linq__15) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent9]
WHERE ([Extent9].[ServiceId] = [Extent1].[ServiceId]) AND (2 = CAST( [Extent9].[TicketType] AS int)) AND (2 = [Extent9].[SupportLine]) AND ([Extent9].[OperatorGroupId] = [Extent8].[OperatorGroupId])
)))) OR ((3 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsServiceRequests] = 1) OR ((301 = CAST( [Extent1].[TicketState] AS int)) AND ([Extent2].[WfDisableServiceRequestTakeFromQueueAction] <> cast(1 as bit)))) AND (( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent10]
WHERE ([Extent1].[ServiceId] = [Extent10].[ServiceId]) AND (3 = CAST( [Extent10].[TicketType] AS int)) AND ([Extent10].[UserProviderKey] = @p__linq__16)
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent11]
WHERE ([Extent11].[UserProviderKey] = @p__linq__17) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent12]
WHERE ([Extent12].[ServiceId] = [Extent1].[ServiceId]) AND (3 = CAST( [Extent12].[TicketType] AS int)) AND ([Extent12].[OperatorGroupId] = [Extent11].[OperatorGroupId])
)))) OR ((4 = CAST( [Extent1].[TicketType] AS int)) AND ([Extent2].[AllowAccessToOtherOperatorsProblems] = 1) AND (( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent13]
WHERE ([Extent1].[ServiceId] = [Extent13].[ServiceId]) AND (4 = CAST( [Extent13].[TicketType] AS int)) AND ([Extent13].[UserProviderKey] = @p__linq__18)
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent14]
WHERE ([Extent14].[UserProviderKey] = @p__linq__19) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent15]
WHERE ([Extent15].[ServiceId] = [Extent1].[ServiceId]) AND (4 = CAST( [Extent15].[TicketType] AS int)) AND ([Extent15].[OperatorGroupId] = [Extent14].[OperatorGroupId])
)))) OR ((5 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsChanges] = 1) OR ((501 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableChangeTakeFromQueueAction] <> cast(1 as bit)))) AND (( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent16]
WHERE ([Extent1].[ServiceId] = [Extent16].[ServiceId]) AND (5 = CAST( [Extent16].[TicketType] AS int)) AND ([Extent16].[UserProviderKey] = @p__linq__20)
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent17]
WHERE ([Extent17].[UserProviderKey] = @p__linq__21) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent18]
WHERE ([Extent18].[ServiceId] = [Extent1].[ServiceId]) AND (5 = CAST( [Extent18].[TicketType] AS int)) AND ([Extent18].[OperatorGroupId] = [Extent17].[OperatorGroupId])
)))) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[TicketInvitations] AS [Extent19]
WHERE ([Extent19].[TicketId] = [Extent1].[Id]) AND (([Extent19].[InvitedUserProviderKey] = @p__linq__22) OR (([Extent19].[InvitedUserProviderKey] IS NULL) AND (@p__linq__22 IS NULL)))
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM (SELECT
[Extent20].[CustomerId] AS [CustomerId]
FROM [dbo].[CustomerUsers] AS [Extent20]
WHERE ([Extent20].[UserProviderKey] = @p__linq__23) AND ([Extent20].[CanAccessOthersTickets] = 1)
INTERSECT
SELECT
[Extent21].[CustomerId] AS [CustomerId]
FROM [dbo].[CustomerUsers] AS [Extent21]
WHERE [Extent21].[UserProviderKey] = [Extent1].[SubmitterKey]) AS [Intersect1]
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM (SELECT
[Extent22].[InternalGroupId] AS [InternalGroupId]
FROM [dbo].[InternalGroupUsers] AS [Extent22]
WHERE ([Extent22].[UserProviderKey] = @p__linq__24) AND ([Extent22].[CanAccessOthersTickets] = 1)
INTERSECT
SELECT
[Extent23].[InternalGroupId] AS [InternalGroupId]
FROM [dbo].[InternalGroupUsers] AS [Extent23]
WHERE [Extent23].[UserProviderKey] = [Extent1].[SubmitterKey]) AS [Intersect2]
) AS [GroupBy1]',N'@p__linq__0 bit,@p__linq__1 varchar(8000),@p__linq__2 varchar(8000),@p__linq__3 varchar(8000),@p__linq__4 varchar(8000),@p__linq__5 bit,@p__linq__6 bit,@p__linq__7 varchar(8000),@p__linq__8 varchar(8000),@p__linq__9 varchar(8000),@p__linq__10 varchar(8000),@p__linq__11 varchar(8000),@p__linq__12 varchar(8000),@p__linq__13 varchar(8000),@p__linq__14 varchar(8000),@p__linq__15 varchar(8000),@p__linq__16 varchar(8000),@p__linq__17 varchar(8000),@p__linq__18 varchar(8000),@p__linq__19 varchar(8000),@p__linq__20 varchar(8000),@p__linq__21 varchar(8000),@p__linq__22 varchar(8000),@p__linq__23 varchar(8000),@p__linq__24 varchar(8000)',@p__linq__0=0,@p__linq__1='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__2='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__3='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__4='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__5=1,@p__linq__6=0,@p__linq__7='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__8='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__9='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__10='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__11='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__12='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__13='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__14='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__15='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__16='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__17='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__18='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__19='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__20='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__21='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__22='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__23='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__24='31555851-b89d-4a15-bb05-5a6fd42f9552'
Generated DDL for related tables: (indexes are primary on PKs and FKs)
CREATE TABLE [dbo].[CustomerUsers](
[UserProviderKey] [varchar](184) NOT NULL,
[CustomerId] [int] NOT NULL,
[CanAccessOthersTickets] [bit] NOT NULL,
CONSTRAINT [PK_dbo.CustomerUsers] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[InternalGroupUsers] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[InternalGroupUsers](
[UserProviderKey] [varchar](184) NOT NULL,
[InternalGroupId] [int] NOT NULL,
[CanAccessOthersTickets] [bit] NOT NULL,
CONSTRAINT [PK_dbo.InternalGroupUsers] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC,
[InternalGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[OperatorGroupUsers] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[OperatorGroupUsers](
[UserProviderKey] [varchar](184) NOT NULL,
[OperatorGroupId] [int] NOT NULL,
CONSTRAINT [PK_dbo.OperatorGroupUsers] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC,
[OperatorGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[ServiceDeputyManagers] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ServiceDeputyManagers](
[UserProviderKey] [varchar](184) NOT NULL,
[ServiceId] [int] NOT NULL,
[TicketType] [int] NOT NULL,
CONSTRAINT [PK_dbo.ServiceDeputyManagers] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC,
[ServiceId] ASC,
[TicketType] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[ServiceOperatorGroups] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[ServiceOperatorGroups](
[ServiceId] [int] NOT NULL,
[OperatorGroupId] [int] NOT NULL,
[TicketTypeValue] [int] NOT NULL,
[SupportLine] [int] NOT NULL,
[TicketType] [int] NOT NULL,
CONSTRAINT [PK_dbo.ServiceOperatorGroups] PRIMARY KEY CLUSTERED
[ServiceId] ASC,
[OperatorGroupId] ASC,
[TicketTypeValue] ASC,
[SupportLine] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[ServiceOperators] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ServiceOperators](
[UserProviderKey] [varchar](184) NOT NULL,
[ServiceId] [int] NOT NULL,
[TicketTypeValue] [int] NOT NULL,
[SupportLine] [int] NOT NULL,
[TicketType] [int] NOT NULL,
CONSTRAINT [PK_dbo.ServiceOperators] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC,
[ServiceId] ASC,
[TicketTypeValue] ASC,
[SupportLine] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[Services] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Services](
[Id] [int] IDENTITY(1,1) NOT NULL,
[ParentId] [int] NULL,
[Name] [nvarchar](256) NOT NULL,
[Description] [nvarchar](max) NULL,
[Disabled] [bit] NOT NULL,
[NewTicketLimitedAccess] [bit] NOT NULL,
[Incident1stLineSupportLimitedAccess] [bit] NOT NULL,
[Incident2ndLineSupportLimitedAccess] [bit] NOT NULL,
[ServiceRequestLimitedAccess] [bit] NOT NULL,
[ProblemLimitedAccess] [bit] NOT NULL,
[ServiceRequestManager] [varchar](184) NOT NULL,
[IncidentManager] [varchar](184) NOT NULL,
[ProblemManager] [varchar](184) NOT NULL,
[Deleted] [bit] NOT NULL,
[WfDisableIncidentAssignedState] [bit] NOT NULL,
[WfDisableIncidentConfirmedState] [bit] NOT NULL,
[WfDisableIncidentTakeFromQueueAction] [bit] NOT NULL,
[WfDisableIncidentFinishSolutionAction] [bit] NOT NULL,
[WfDisableServiceRequestAssignedState] [bit] NOT NULL,
[WfDisableServiceRequestConfirmedState] [bit] NOT NULL,
[WfDisableServiceRequestTakeFromQueueAction] [bit] NOT NULL,
[WfDisableServiceRequestFinishSolutionAction] [bit] NOT NULL,
[WfDisableServiceRequestPostponeAction] [bit] NOT NULL,
[ChangeLimitedAccess] [bit] NOT NULL,
[ChangeManager] [varchar](184) NOT NULL,
[WfDisableChangeTakeFromQueueAction] [bit] NOT NULL,
[WfDisableChangeAssignedState] [bit] NOT NULL,
[WfDisableChangeStartPreparationAction] [bit] NOT NULL,
[IsDepartment] [bit] NOT NULL,
[InheritsFromDepartment] [bit] NOT NULL,
[AllowSelectSolverBySubmitterForIncidents] [bit] NOT NULL,
[AllowSelectSolverBySubmitterForServiceRequests] [bit] NOT NULL,
[AllowSelectSolverBySubmitterForProblems] [bit] NOT NULL,
[AllowSelectSolverBySubmitterForChanges] [bit] NOT NULL,
[AllowAccessToOtherOperatorsIncidents] [bit] NOT NULL,
[AllowAccessToOtherOperatorsServiceRequests] [bit] NOT NULL,
[AllowAccessToOtherOperatorsProblems] [bit] NOT NULL,
[AllowAccessToOtherOperatorsChanges] [bit] NOT NULL,
[AllowChangeDeadlineForIncidents] [bit] NOT NULL,
[AllowChangeDeadlineForServiceRequests] [bit] NOT NULL,
[AllowChangeDeadlineForProblems] [bit] NOT NULL,
[AllowChangeDeadlineForChanges] [bit] NOT NULL,
[AllowSelectPriorityForServiceRequests] [bit] NOT NULL,
[WfDisableIncidentCompletedState] [bit] NOT NULL,
[WfDoIncidentCompleteActionBySubmittersMessage] [bit] NOT NULL,
[WfDisableServiceRequestCompletedState] [bit] NOT NULL,
[WfDoServiceRequestCompleteActionBySubmittersMessage] [bit] NOT NULL,
CONSTRAINT [PK_dbo.Services] PRIMARY KEY CLUSTERED
[Id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[TicketInvitations] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[TicketInvitations](
[Id] [int] IDENTITY(1,1) NOT NULL,
[TicketId] [int] NOT NULL,
[InitiatorUserProviderKey] [varchar](184) NULL,
[InitiatorFullName] [nvarchar](max) NULL,
[InvitedUserProviderKey] [varchar](184) NULL,
[InvitedFullName] [nvarchar](max) NULL,
[Type] [int] NOT NULL,
[CreatedUTC] [datetime] NOT NULL,
CONSTRAINT [PK_dbo.TicketInvitations] PRIMARY KEY CLUSTERED
[Id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[Tickets] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Tickets](
[Id] [int] IDENTITY(1,1) NOT NULL,
[ParentId] [int] NULL,
[ServiceId] [int] NULL,
[ServiceMailboxId] [int] NULL,
[TicketTypeValue] [int] NOT NULL,
[TicketTypeIdREF] [int] NOT NULL,
[SubmitterKey] [varchar](184) NOT NULL,
[SubmitterFullName] [nvarchar](256) NULL,
[CustomerId] [int] NULL,
[SolverKey] [varchar](184) NULL,
[SolverFullName] [nvarchar](256) NULL,
[Subject] [nvarchar](max) NULL,
[CreatedUTC] [datetime] NOT NULL,
[Archived] [bit] NOT NULL,
[MarkedAsSolvedUTC] [datetime] NULL,
[ArchivedUTC] [datetime] NULL,
[TicketSourceValue] [int] NOT NULL,
[OperatorKey] [varchar](184) NULL,
[DeadlineUTC] [datetime] NULL,
[DeadlineLastNotificatedPercentage] [int] NULL,
[UrgencyValue] [int] NULL,
[ImpactValue] [int] NULL,
[PriorityValue] [int] NULL,
[TicketStateValue] [int] NOT NULL,
[IncidentFunctionEscalatedTo2ndLineSupport] [bit] NOT NULL,
[Incident2ndLineSupportKey] [varchar](184) NULL,
[Incident2ndLineSupportFullName] [nvarchar](max) NULL,
[TicketType] [int] NOT NULL,
[Source] [int] NOT NULL,
[TicketState] [int] NOT NULL,
[Urgency] [int] NULL,
[Impact] [int] NULL,
[TicketSummaryState] [int] NOT NULL,
[ResolutionText] [nvarchar](max) NULL,
[ResolutionModifiedUTC] [datetime] NULL,
[ResolutionEdited] [bit] NOT NULL,
[ResolutionUserProviderKey] [varchar](184) NULL,
[ResolutionFullName] [nvarchar](max) NULL,
[TicketSubType] [int] NULL,
[ChangeRiskProbabilityValue] [int] NULL,
[ChangeImpactValue] [int] NULL,
[ChangeRiskCategoryValue] [int] NULL,
[RfcText] [nvarchar](max) NULL,
[RfcModifiedUTC] [datetime] NULL,
[RfcEdited] [bit] NOT NULL,
[RfcUserProviderKey] [varchar](184) NULL,
[RfcFullName] [nvarchar](max) NULL,
[ManualDeadline] [bit] NOT NULL,
[ContactInformation] [nvarchar](256) NULL,
[Imported] [bit] NOT NULL,
[ForceClosed] [bit] NOT NULL,
CONSTRAINT [PK_dbo.Tickets] PRIMARY KEY CLUSTERED
[Id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Index [IX_CustomerId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_CustomerId] ON [dbo].[CustomerUsers]
[CustomerId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_InternalGroupId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_InternalGroupId] ON [dbo].[InternalGroupUsers]
[InternalGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_OperatorGroupId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_OperatorGroupId] ON [dbo].[OperatorGroupUsers]
[OperatorGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceId] ON [dbo].[ServiceDeputyManagers]
[ServiceId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_OperatorGroupId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_OperatorGroupId] ON [dbo].[ServiceOperatorGroups]
[OperatorGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceId] ON [dbo].[ServiceOperatorGroups]
[ServiceId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceId] ON [dbo].[ServiceOperators]
[ServiceId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ParentId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ParentId] ON [dbo].[Services]
[ParentId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_TicketId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_TicketId] ON [dbo].[TicketInvitations]
[TicketId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_TicketInvitations_InvitedUserProviderKey_TicketId] Script Date: 7.5.2014 8:39:38 ******/
CREATE UNIQUE NONCLUSTERED INDEX [IX_TicketInvitations_InvitedUserProviderKey_TicketId] ON [dbo].[TicketInvitations]
[InvitedUserProviderKey] ASC,
[TicketId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_CustomerId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_CustomerId] ON [dbo].[Tickets]
[CustomerId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ParentId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ParentId] ON [dbo].[Tickets]
[ParentId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceId] ON [dbo].[Tickets]
[ServiceId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceMailboxId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceMailboxId] ON [dbo].[Tickets]
[ServiceMailboxId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_SolverFullName] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_SolverFullName] ON [dbo].[Tickets]
[SolverFullName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_SolverKey] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_SolverKey] ON [dbo].[Tickets]
[SolverKey] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_SubmitterFullName] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_SubmitterFullName] ON [dbo].[Tickets]
[SubmitterFullName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_SubmitterKey] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_SubmitterKey] ON [dbo].[Tickets]
[SubmitterKey] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_Tickets_TicketType_TicketTypeIdREF] Script Date: 7.5.2014 8:39:38 ******/
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tickets_TicketType_TicketTypeIdREF] ON [dbo].[Tickets]
[TicketType] ASC,
[TicketTypeIdREF] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
ALTER TABLE [dbo].[CustomerUsers] WITH CHECK ADD CONSTRAINT [FK_dbo.CustomerUsers_dbo.Customers_CustomerId] FOREIGN KEY([CustomerId])
REFERENCES [dbo].[Customers] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[CustomerUsers] CHECK CONSTRAINT [FK_dbo.CustomerUsers_dbo.Customers_CustomerId]
GO
ALTER TABLE [dbo].[InternalGroupUsers] WITH CHECK ADD CONSTRAINT [FK_dbo.InternalGroupUsers_dbo.InternalGroups_InternalGroupId] FOREIGN KEY([InternalGroupId])
REFERENCES [dbo].[InternalGroups] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[InternalGroupUsers] CHECK CONSTRAINT [FK_dbo.InternalGroupUsers_dbo.InternalGroups_InternalGroupId]
GO
ALTER TABLE [dbo].[OperatorGroupUsers] WITH CHECK ADD CONSTRAINT [FK_dbo.OperatorGroupUsers_dbo.OperatorGroups_OperatorGroupId] FOREIGN KEY([OperatorGroupId])
REFERENCES [dbo].[OperatorGroups] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[OperatorGroupUsers] CHECK CONSTRAINT [FK_dbo.OperatorGroupUsers_dbo.OperatorGroups_OperatorGroupId]
GO
ALTER TABLE [dbo].[ServiceDeputyManagers] WITH CHECK ADD CONSTRAINT [FK_dbo.ServiceDeputyManagers_dbo.Services_ServiceId] FOREIGN KEY([ServiceId])
REFERENCES [dbo].[Services] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[ServiceDeputyManagers] CHECK CONSTRAINT [FK_dbo.ServiceDeputyManagers_dbo.Services_ServiceId]
GO
ALTER TABLE [dbo].[ServiceOperatorGroups] WITH CHECK ADD CONSTRAINT [FK_dbo.ServiceOperatorGroups_dbo.OperatorGroups_OperatorGroupId] FOREIGN KEY([OperatorGroupId])
REFERENCES [dbo].[OperatorGroups] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[ServiceOperatorGroups] CHECK CONSTRAINT [FK_dbo.ServiceOperatorGroups_dbo.OperatorGroups_OperatorGroupId]
GO
ALTER TABLE [dbo].[ServiceOperatorGroups] WITH CHECK ADD CONSTRAINT [FK_dbo.ServiceOperatorGroups_dbo.Services_ServiceId] FOREIGN KEY([ServiceId])
REFERENCES [dbo].[Services] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[ServiceOperatorGroups] CHECK CONSTRAINT [FK_dbo.ServiceOperatorGroups_dbo.Services_ServiceId]
GO
ALTER TABLE [dbo].[ServiceOperators] WITH CHECK ADD CONSTRAINT [FK_dbo.ServiceOperators_dbo.Services_ServiceId] FOREIGN KEY([ServiceId])
REFERENCES [dbo].[Services] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[ServiceOperators] CHECK CONSTRAINT [FK_dbo.ServiceOperators_dbo.Services_ServiceId]
GO
ALTER TABLE [dbo].[Services] WITH CHECK ADD CONSTRAINT [FK_dbo.Services_dbo.Services_ParentId] FOREIGN KEY([ParentId])
REFERENCES [dbo].[Services] ([Id])
GO
ALTER TABLE [dbo].[Services] CHECK CONSTRAINT [FK_dbo.Services_dbo.Services_ParentId]
GO
ALTER TABLE [dbo].[TicketInvitations] WITH CHECK ADD CONSTRAINT [FK_dbo.TicketInvitations_dbo.Tickets_TicketId] FOREIGN KEY([TicketId])
REFERENCES [dbo].[Tickets] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[TicketInvitations] CHECK CONSTRAINT [FK_dbo.TicketInvitations_dbo.Tickets_TicketId]
GO
ALTER TABLE [dbo].[Tickets] WITH CHECK ADD CONSTRAINT [FK_dbo.Tickets_dbo.Customers_CustomerId] FOREIGN KEY([CustomerId])
REFERENCES [dbo].[Customers] ([Id])
GO
ALTER TABLE [dbo].[Tickets] CHECK CONSTRAINT [FK_dbo.Tickets_dbo.Customers_CustomerId]
GO
ALTER TABLE [dbo].[Tickets] WITH CHECK ADD CONSTRAINT [FK_dbo.Tickets_dbo.ServiceMailboxes_ServiceMailboxId] FOREIGN KEY([ServiceMailboxId])
REFERENCES [dbo].[ServiceMailboxes] ([Id])
GO
ALTER TABLE [dbo].[Tickets] CHECK CONSTRAINT [FK_dbo.Tickets_dbo.ServiceMailboxes_ServiceMailboxId]
GO
ALTER TABLE [dbo].[Tickets] WITH CHECK ADD CONSTRAINT [FK_dbo.Tickets_dbo.Services_ServiceId] FOREIGN KEY([ServiceId])
REFERENCES [dbo].[Services] ([Id])
GO
ALTER TABLE [dbo].[Tickets] CHECK CONSTRAINT [FK_dbo.Tickets_dbo.Services_ServiceId]
GO
ALTER TABLE [dbo].[Tickets] WITH CHECK ADD CONSTRAINT [FK_dbo.Tickets_dbo.Tickets_ParentId] FOREIGN KEY([ParentId])
REFERENCES [dbo].[Tickets] ([Id])
GO
ALTER TABLE [dbo].[Tickets] CHECK CONSTRAINT [FK_dbo.Tickets_dbo.Tickets_ParentId]
GO -
Exchange 2013 Migration in a complicated network environment
Hello everyone,
I am conducting an Exchange migration from 2007 to 2013. The client have 4 geographical site and each of those site have an Exchange CAS server on it. The sites
have also DCs on each of them.
There's two types of connection between sites one is MPLS that's 50MBPs and the other is p2p that's 2mbps. Client wants to have only 2 Exchange 2013 Server with
all the roles collocated on them and DAG between them.
I already have installed and configured DAG on the servers. One server is located in the Central data center and the other is located on a second geographical
site that also have a disaster recovery data center.
Client wants to configure the MAPI network on Exchange 2013 to use the P2P 2mbps connection and use the MPLS 50mbps connection for the replication NIC.
The problem is that both networks MPLS and P2P have the same IP subnet, same gateway e.g. (10.1.1.0/16) but a range of those IPs are configured on the router to
use the MPLS connectivity.
I have tried to add static route to the replication network to use the gateway but when trying to add a copy of a centralized database to the DAG. the DAG copies
the connection over the P2P line.
Is it possible to configure this with the same subnet or do I need to have the mpls connection on a totally different network and subnet?
I would appreciate all your suggestions and I am very sorry for my terrible explanation because I am my self confused about their network topology.
I will prepare a visio diagram of the network, IPs and everything to clear everything out.
Mohammed JHI have solved the issue, it was very simple but due to lack of knowledge about networking it got complicated. the way I have configured the replication networks between both sites was that each replication NIC on each site should have a different subnet
that configured on the MPLS network with the high speed and bandwidth. they must be different on each site.
For each replication NIC a persistent static route should be configured on Exchange server to tell the NIC where to direct traffic exactly.
After configuring the subnets on the replication NIC, I added the static routes and the replication started to work flawlessly.
This is the static route command that I run on the first machine on the first site, it tells the Replication NIC to direct traffic to the subnet network on the second site through the gateway 10.1.1.1
route -p add 10.5.1.0 MASK 255.255.0.0 10.1.1.1
On Exchange on the second site, I had to run the same command as well
route -p add 10.1.1.0 MASK 255.255.0.0 10.5.1.1
thanks everyone for the help.
Mohammed JH
Maybe you are looking for
-
Sales Return Quantity to be adjusted in original sale order
Dear All, We have a scenario, where Customer provides fixed quantity PO and we have to supply the items as per the schedule until the PO qty is completed and we have to supply additional quantity in case if there is any Sales return. Say the customer
-
Error in writing to file '$ORACLE_HOME/jdk/jre/bin/java'
Hi, I have installed Forms & Reports Services Standalone (10.1.2.0.2) on RHEL 5 and now I am applying the Oracle Application Server 10g Release 2, Patch Set 3 (10.1.2.3), but OUI gives the following error: Error in writing to file '$ORACLE_HOME/jdk/j
-
Data without the select keyword
Can we get the table data wihtout using SELECT keyword in query? Just a out of the box question, asked in interview.
-
My iPad 2 won't start, screen stays balck even plugs into charger for 15 minutes. What can i try?
my iPad 2 won't start, screen stays black while plugged into charger. What can i try?
-
Win2k cannot start oracle services
Hi, Usually, our oracle servers can start up autometically when the machine start up. Just now, oracle services cannot start. I try use start->control panel->administrator tool-> services to start oracle service, it gets errors as following: could no