Complicated possible workaround for Keynote to Quick Time issues etc.??

I've been experiencing many of the issues already presented here. This is obviously a major issue that Apple may already be trying to fix for an update, but they never tell anyone what they are doing. My project contains .mov files with audio and they just don't behave, the audio is off and movie files either play with disjoionted audio, or, freeze on the first frame. Also, half the transitions don't export to quick time, idvd or any other format I've tried.
For those with 2 computers and a little extra hardware, I've got a possible workaround that "may" at least get the project rolling again. I hooked my MacBook Pro into my Eye TV 250 and switching to AV input, simply played the presentation I'd recorded with all my timings and transitions through the Eye TV box into my desktop computer. I then exported the live recording through the Eye TV software to a .mov file and all the transistions and audio seemed to be the way I set them up. I then brought this movie into Garage Band and added a backing track.
Eye250 is not ideal for commercial projects because I seem to have some quality loss, BUT, I was importing to a G4 mac Mini so maybe that's an issue as well. If anyone else has an external digital video input device and two Intel machines, could they please try this out and see if the quality is HD.
If this works, it would at least be a workaround for guys with commercial projects on deadline until Apple fixes their software. Appreciate any input!!!!

Sadly, IP printing is not a feasible solution for me. When I configure it as you've described, the print job goes to the queue and stalls with this message--
Network host '192.168.0.187' is busy; will retry in 10 seconds...
This print-once-then-never-again issue is very frustrating. Airport express has been an unreliable print server from the get-go. The firmware hasn't been updated in two years and Apple has never published a list of supported USB printers. It's one of those things they want reps in the apple store to be able to verbally tell people that the product will do, but in writing, "good luck with that."
I'm getting on Amazon right now to find a real print server. AE is a burner of time.
Seth

Similar Messages

Possible workaround for CSCed41207

Hi,
Maybe not a real solution, but could be used as a workaround for bug CSCed41207 (CallManager needs support for MGCP fractional PRI).
You can set the B channels which are unavailable (because it's a fractional PRI) to maintenance mode with the following service parameter.
"Cisco Callmanager" service. Select advanced. Under "Clusterwide Parameters (Device - PRI and MGCP Gateway)" use the "Change B-Channel Maintenance Status #" parameter to disable the unavailable channels.
Example, if you have a E1 with 15 channels available, set the parameter to:
S1/[email protected] = 0000 0000 0000 0000 1111 1111 1111 1111
A 1 disables the channel. Always enable channel 16 because this is the D channel (for a E1).
You can use this for up to 5 gateway's. I've used this solution for fractional PRI with MGCP numerous times and it works!

Hi Dirk
Thanks for sharing the workaround solution for "CSCed41207".
We are working on new capabilities, where you can see relevant bug related discussions in the bug details page itself.
Discussion posts like yours, will show in the bug details page of "CSCed41207" and other Cisco Bug Toolkit users can benefit from this knowledge.
Please continue to share such experiences in the future.
Thanks
Arun

ITunes won't run because of Quick Time issue

I can't get Quick Time to work, so I can use my ITunes. I have tried to reinstall. but it just gives me an error sending report.
Any help, pleae.

That error message suggests that you have or have had one of the problem programs I listed. It is possible that one may have been installed with something else. You need to be sure you have got rid of these programs. They are bad news for Quicktime.
Here is the procedure if the uninstall fails - you need to do an installer cleanup:
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Quick time issues

im trying to upgrade to the new itunes, but i keep getting an error message at the end of the download that says "old quick time application cannot be deleted contact technical support"?

"old quick time application cannot be deleted contact technical support"?
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Restart the PC, and try another iTunes install.

Possible workaround for: Launch Debugger Error "Unable to connect to the RDS server"

I do not yet have a reproducible case for this. *Sometimes* ColdFusion Builder throws the "Unable to connect to the RDS server" error, when attempting to start a debug session against a remote server. However, "RDS Dataview" and "RDS Fileview" views correctly list the servers and their related data/file, and testing RDS connection result is "Test connection was successful". The workaround is:
1. Login to the ColdFusion Administrator
2. Navigate to "Debugger Settings" page (beneath "Debugging & Logging")
3. Click on "Stop Debugger Server" -or- "Restart Debugger Server"
4. Restart ColdFusion Application Server
Notes:
a) Step #3 must be done via ColdFusion Administrator, not via ColdFusion Admin API (stopLineDebugger()|restartLineDebugger())
b) Step #4 can be done via ColdFusion Administrator -or- ColdFusion Builder
c) Note that there is a CF9 Release Note for Bug #78488: "When a server having "Windows service option" ENABLED is added as a remote server, then Start-Stop-Restart operation cannot be done on it." However, I've found that "Restarting" a remote server, that is running as a Windows service, is possible in ColdFusion Builder (at least this is so on standalone developer edition). Like Bug #78488 says, I am unable to "Stop|Start" a remote server that is running as a Windows service. I'm just mentioning all of this, due to my suggestion in "b", that CF can also be restarted via ColdFusion Builder.
It is interesting that attempts to stop|restart the debugger server, via CF Admin API, do not resolve the issue. So, it seems that the "Stop Debugger Server" and "Restart Debugger Server" buttons, in CF Admin, are doing more than calling the corresponding CF Admin API methods.
Attached is an image of the error.
Just posting all of this as an FYI, in case it helps anyone.
Thanks!,
-Aaron Neff
(OH.. I'm unable to attach images at this time *DOH!* ..well, I'll try to remember to update this post w/ the image, once I see that attachments are allowed.)
I'll try to describe the error message window:
- It is 494x452 pixels
- Title of the window is "Error occurred while launching the Debugger"
- Body content of the window is as follows:
Unable to connect to the RDS server 'ServerNameHere'
Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
Error Message:
-1:Error connecting to JVM for debugging at localhost:5005. Could not attach to the VM at port 5005. You must specify this debugger port in the JVM settings of your application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
Root cause ->
Connect refused: connect

hi,
I have been facing the same problems while connecting to Oracle Web Conferencing and is getting error message :Unable to connect to the server. The Web COnferencing Console will now close. Please try again later. If the problem persist, contact your system administrator.
Diagnostic report shows failed on the connectivity part
Connectivity
mx-direct Failed
0:00:00.719 Connecting to web331.oracle.com:1025
0:00:00.922 Name resolved to 148.87.108.234
0:00:21.906 connect() failed (0x8007274C)
0:00:21.906 Connection failed (0x8007274C)
Pl help me to fix the problem.
Regards
Gobind Ahuja

Possible Workaround for Whine

Ok so i have had my MacBook for like 3 weeks now and I absolutely love it and yeah it has the whine but it is very faint doesnt bother me. Anyway so I just got a wireless Mighty Mouse and just realized while the mouse and the MacBook are paired there is absolutely no whine. I just thought some of you guys would like to know or would know why it does this. It still whines with Bluetooth turned on but with the mouse it completely goes away.
MacBook 2GHz and 2 gigs of ram 80 gig Mac OS X (10.4.7)

Recent ruminations postulate the whine may occur under OSX when the CoreDuo processors go into a deep sleep mode during times of low activity under normal usage. So having something running which prevents the CPU from being inactive enough to power down like this, as it were, accordingly prevents the whine. It doesn't surprise me that a bluetooth device would function this way. Your CPU temps are probably also slightly hotter and battery life shorter, which seems to be the case with the other work-arounds people have discovered. I use voodoo (check out the following thread):
http://discussions.apple.com/message.jspa?messageID=2776741#2776741
and here, from the Macbook Pro people:
http://discussions.apple.com/thread.jspa?messageID=2633897

Possible Workaround for iTunes skipping / crackling

Right, following the recent number of complaints regarding iTunes 7, I've done some work on the problem and have found a possible solution.
The new UI seems to take far more CPU power and RAM than it's predecessor, so here's a fix that may help on some systems. Please note that you MUST be running Windows XP for this to work:
1) When you first load iTunes, press Ctrl + Alt + Del,
2) Choose the tab labeled "Processes", and find iTunes.exe in the list displayed
3) Right click on this, and choose "Set Priority > Above Normal"
Close Task Manager, and hope that this works
I have tried this on two systems, and it seems to work. Please post your success / failure stories
Windows XP Pro

hey wsup i came across this forum and i must say its a start. I tested it on my videos and i noticed less lag and choppiness in the videos than before yet there are still some. I noticed the videos mainly lag when im wathign a video and using AIM on my laptop. ITs a start yet and its better than where i was before, but i dont wanna have to set priority to itunes and then just have all my other applications lagg.
So for now the videos are ok, but i dont wanna divert so much memory to itunes. Soo thnx for the solution. Better than what anone else has come up with lol ight get back to me if u find anymore solutions thnx

A possible workaround for C2D Airport problems?

A collegue advised the other day to download iStumbler, a free application that seems to sit and monitor all connections coming in your Airport, also for Bluetooth, Bonjour, etc.
Well, I did... and ever since this thing started to work seeing my Network wifi the airport bars has returned back to the maximum level and there has been no connection drops, re-connecting flawlessly after sleep.
Its funny also how iStumbler is able to see more Network wifis than the Airport menu: I see 2, sometimes 3 connections that I never saw on the Airport menu.
The signal is reported to be at 70% with a 13% noise. But working great!
Can someone with Airport problems try this solution and see if it works too? Maybe we are into something?
Regards,
-- Carlos

I had installed istumbler a couple of days ago it did seem to improve the signal for a period then the signal dropped back to the normal 4/5 bars.
After your post I started istumbler again and found there was an update the purports to solve signal problems with core 2 Duo macs.
I have updated and have full signal strength for last 5 minutes longer than ever before.
Fingers crossed

Freeze the video for about 3 to 5 seconds in all the media players (e.g VLC, quick time, divx etc). do i need to update any video codec??

while any video file is running , suddenly it freezes the video for about 3 to 5 seconds in all the media players like quicktime, vlc and div x and this thing happens frequently with video files.
it very hard to watch the video movie with this issue.
do i need to update any video codec or any thing else??
following are my notebook specifications
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 512 MB
Software OS X 10.8.4 (12E55)

while any video file is running , suddenly it freezes the video for about 3 to 5 seconds in all the media players like quicktime, vlc and div x and this thing happens frequently with video files.
it very hard to watch the video movie with this issue.
do i need to update any video codec or any thing else??
following are my notebook specifications
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 512 MB
Software OS X 10.8.4 (12E55)

Outlook 2011 for mac daylight savings time issue

Hello,
I have a problem in my company where after daylight savings time meetings are shown an hour off in the calendar, but in the body of the meeting the time seems fine. The real problem is when after updating the meeting from it's body (just pressing save and
close) the meeting is bloated by an hour.
E.g. if a meeting after daylight savings time is from 11:00 to 12:00, it's shown on the calendar from 12:00 to 13:00, but after updating the meeting it's shown from 11:00-13:00.
This happens only on the macs in the company.
Thank you.

Hi Harel,
This is the forum to discuss questions and feedback for Windows-based Microsoft Office client. Since your query is directly related to Office for mac, I would suggest you to post in the forum of Office for Mac, where you can get more experienced responses:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Is the "Wake Lock" app a good workaround for the Missed Calls/Texts issue?

Back on Jun 18, at the beginning of the "Any One Having Missed Call Problem after ED04 ..." thread, wardcst24 posted that the Wake Lock app seemed to fix the issue of missing calls and that all calls now were received A-OK (not sure about texts).
I think the train of thought is that after the Froyo / ED01 / ED04 updates, when the phone is in sleep mode it doesn't recognize some incoming calls and texts, but that this app keeps the CPU active enough to detect them when received. There's probably a (minimal?) hit to memory / battery life / processing speed, but certainly acceptable vs missing calls.
Has anyone had any luck with this or a similar app? I can't test it since I'm still on 2.1 (never got around to upgrading to Froyo, sometimes it pays to be lazy . . . )..
Here's the thread with the original Wake Lock reference:
http://community.vzw.com/t5/Samsung-Fascinate/Any-One-Having-Missed-Call-Problem-After-ED04-Update-Post-Here/td-p/561962
Joel

It did work but when you would get a call wake lock would crash and if you didn't remember to reset it you would start missing calls again.
It would consume 3% per hour
I could not deal with having to remember to reset all the time so I sent my phone back to Samsung for the 5th time.
There is another one that is said to work very well it is sofLocker
https://market.android.com/details?id=otis8.softlocker
I have not been able to test because Samsung has my phone for time #5

Quick time issue

I did a microsoft update 4 days ago and since then my itunes wont boot. i have found that quicktime is responsible and tried several suggestions on this message board (delete qt and itunes,reinstal and do windows install cleanup, tried task maneger and to no avail the qt problem persists. when i open qt in control panel and click on "file types" i get a "rundll" error window that says "an axception has occured while trying to run "c:\windows\system32\shell32,dll,control_rundll "c:\program files\quicktime\qtsystem\quicktime.cpl",quiktime"
Any help would be greatly appreciated. you guys in here are great!

Let's try swapping out your QuickTime one more time, taking a few additional explicit precautions.
Head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
7. Restart your computer.
Next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
Switch off antivirus and antispyware applications prior to the repair install.
Go into Add/Remove and select itunes. Click "Change" and then click "Repair".
If the repair install goes through okay, restart the PC and try launching itunes again. Does it launch properly now?

Help!!!!???? itunes and quickie time issue!!!!!!!

i use mac 0s x 10.3.9..... itunes ver 7.0.2, and quicktime 7.1.3.... why don't theyu respond when opening!!!!!! help!!!!!

hiya!
QuickTime handles the audio and video playback for iTunes. so it's quite possible that all your problems here are being caused by a broken QuickTime.
so let's first try a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

Yet another Quick TIme issue.

I made new audio in Digital Performer and imported an MOV file as the source video. The new file was saved as an MOV and plays perfectly on a mac. However, when I try to play this on my pc's QT, I have to load the new file first THEN the original file before both the video/audio play. Help!

OK, that makes total sense. Thank you very much Jon; that explains the issue very clearly. This of course begs another question though; how to I merge the new audio file and the original video file?
That may depend on how you plan to play the file. My preferred strategy is to create a new target file and prevent the original source files from being accidentally modified in case I need to repeat the merge sequence.
1) Open the source files.
2) Create a new empty player.
3) Copy the individual files to the empty player in the order you wish them played.
4 Save the resulting new file as a stand alone file.
This merged file would play in most versions of QT based apps but maight be a problem in some versions of mobile device players which require content be "flattened" to individual audio and video tracks. (I.e., the QT 7 player can play up to 99 mixed data tracks but some versions of the mobile players do not.)

Workaround for ORA-04030 error

hi,
we've encountered the following error:
ORA-04030: out of process memory when trying to allocate 296 bytes (callheap, koposal dvoid)
all of the research i've done points to setting up the database with a Very Large Memory configuration, which will be carried out at a later date as we're still in the development stage.
is there a possible workaround for this error?
thanks
santosh sewlal

hi,
we're inserting into tables - spatial data and images, from a C#.net application that sends data to the db in a BLOB

Complicated possible workaround for Keynote to Quick Time issues etc.??

Similar Messages

Maybe you are looking for