Complicated Question (see pdf): Use data from one table to find the same data in a second table and take other data from that table and place it in a third table. :)

I don't even know if this is posible.
I'm using iwork '09
View PDF

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

Similar Messages

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

Using more than one Business area in the same report

Hi,
Is it possible / recommended to use more than one business area in the same report.
For example, I have a sales (business area sales) report on one tab and a rebates(rebates business area) report on a second tab.
Thanks

Hello
Possible: yes
Recommended: no
This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
My recommendation would be to have a workbook per business area and not mix.
If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
Hope this helps
Michael

I traded my iphone in and now have a new one (iPhone 5) with the same SIM. Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

I traded my iphone in and now have a new one (iPhone 5) with the same SIM. Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

Using more than one front panel at the same time

I have a main program where I can call sub vi’s and then the sub vi’s front panel opens.
I want to use/see/operate more than one front panel at the same time. How I can do it?
For example when I close the main program it won’t close before I close all the sub vi’s front panels.
I use event case to call these sub vi’s. Can I close all vi's using one button?

I wouldn't use subVIs for display, at least not if you plan to have them open all the time. Instead, I would suggest that you have one loop with a FP VI which will talk to the FP all the time and will pass to the data to the other loops through a variable or a functional global.
Then, you can use a tab control to organize your display. If there is no specific reason for not having the graphs in the same VI, you can use a tab control to organize it. If you can't, you can also use subpanels to display the VIs and put several subpanels in your VI.
If you still want to display the VIs seperately, you can control their positions and sizes through their proerty nodes, but I don't think there's any reason for this.
To learn more, I suggest you read the LabVIEW style guide. I think it has some tips about application design.
Try to take over the world!

Can I use more than one USB 6008 in the same program?

I am working on a project that may require up to six USB-6008 modules. Before I purchase more I need to know if I can use all six at a time in the same Lab View program. Can anyone help?
Solved!
Go to Solution.

Hello Nick,
LabVIEW is able to handel that number of DAQ tasks quite easily, however you must remember that USB has a maximum bandwidth. Therefore you would have to ensure that you have enough USB hubs on your PC. Typically there are between two to four USB slots per hub and each of these will have a maximum throughput rate which will divided between all devices attached to that hub. Therefore although you may have four USB DAQ devices attached to four USB ports if they are on the same hub you may notice greatly reduced rates of data transfer. What I would suggest rather than purchasing six or more USB 6008, why not purchase one PCI card which is able to handel many more inputs with a larger bandwidth.
Regards
Andrew George @ NI UK

Using more than one input device at the same time

Is it possible to use more than one input device at the saem time in logic express. For example I have a fire wire input device and a usb input device can I get Express to recognize both of these at once and so have a total of 4 ins which would be great since Im transfering tracks off my ADAT and it would be less track to have to line up.
Thanks

Hi,
yes, it should be possible by creating an aggregate device. Google for it or search this forum. There are many tutorials how to set it up.
Have fun!
Fox

HT5622 Can you use more than one apple ID on the same computer? I can't sign in and out and sync my iPod because my library isn't on there.

My sister has an iTunes account on our main computer, and I have one on our laptop. I want to be able to sync my iPod with the main computer, but I can't because my library is on the laptop. Is there any way to sync my iPod with my library on the computer?

Yes
http://www.imore.com/how-use-multiple-apple-ids-one-computer-and-itunes
However you can only sync all media from one iTunes library/computer. However, one can sync music and videos with different computers/libraries if you have iTunes setup to manually sync. See that method included here:
iTunes: Syncing media content to iOS devices and iPod

Can you use more than one computer to edit the same Premiere Elements Project?

I am using Premiere Elements 10. I have built a new project on my desktop computer because the desktop has a firewire port to capture video from my camcorder and my laptop doesn't have a firewire port. The project is stored on my home network. I seem to be able to do editing fine using the desktop computer that the project was created on, but it won't load up right on the laptop for editing. Premiere Elements is configured the same on both computers. I guess my question is - does Premiere Elements store something on on the computer that the project was created on that is not being stored on the network drive? How can I fix the problem so that I can edit on my laptop? The laptop is a top of the line Dell XPS with an i7 processor that I use for other Premiere projects, so the laptops ability is not an issue.
Thanks
Bill

Yes, having files stored on a HDD, but having the letter change between machines is a problem. The Project file (PREL) is only an XML database, with links to the Assets. Those links are Absolute Paths, so if anything changes, from drive letter, to file name, the link is broken.
I have over a dozen externals, that I use to migrate Projects between my main two computers. Each has had its drive letter set in OS of each computer. I started with Z:\ and worked down. Each drive has a lable on it with the designated drive letter. Unfortunately, I ran out of letters, as the workstation has a ton of HDD's and burners, so I had to start over. That does mean that I cannot have both Z:\ drives plugged in at the same time, but that has never been an issue. I wish that Windows would allow for double drive letters, say ZZ:\, but still, I have a handful of letters to use - just too many externals for those letters...
Happy editing,
Hunt

Using more than one web font in the same text field

I know I can do something like this when calling more than one weight in a web font:
sym.$('copy').html('Adobe | About Us')
And the word Adobe will be bolder than About Us. But what about using more than one font in the same text field? I tried this:
sym.$('copy').html('UHLIG | About Us')
Now that doesn't work and I get a SyntaxError: missing ) after argument list
I then tried
sym.$('copy').html('UHLIG | About Us')
and the text rendered but whatever was selected in the font menu was what got displayed.
Is there a way around this to display two different fonts, web fonts or not, in the same field?

Hey, ladobeugm-
One thing to note is that you probably need to escape the quotes in your span tag. What you have is an issue with quotation marks - for instance, all JavaScript sees is <span style="font-family: in your first string, and only sees <span style="font-family: " in your second. Play around with escaping to see if you can get your span to work.
Hope that helps,
-Elaine

Perfect Keyboard Question!! Using 2 Bluetooth Keyboard in ios5 at the same time

Hello People,
As a Retailer, I love CRM (customer relationship Management) Systems, and I've a software team that programs HTML5 based crm solutions for us.. Why HTML5, because of ipad 2 of course...
ok Technical question! ready?
Can ipad use 3 bluetooth HID keyboards at the same time? you'll ask why?
Problem is
We're planning to use Motorola Symbol CS3070 Barcode Scanner http://www.youtube.com/watch?v=tzIbRJiQD24
And at the same time Apple wireless keyboard for desktop http://www.youtube.com/watch?v=0PBswYZ2JBs
So the problem is ipad 2 reconises CS3070 as HID keyboard! Wualla
Can it be done? P.S : There is no escape key on CS3070
If this can not be done, i'll be forced to use all-in one pc 's which are heavy and not mobile...
And also this will be a problem when i am mobile with the barcode reader and ipad since again there will be no on-screen keyboard.
Thanks
Now thats ipad crazy idea

By the way Correction!!! CS3070 has an disconnect button so it works as it is with the on screen keyboard. connection time is perfect 2 seconds, but disconnection time is 20 seconds on my ipad 1, so do you think ipad2 or future ipad 3 will be faster to disconnect thank you

Can you use more then one micro photo on the same comput

i have had my micro photo for a year it works great i just bought another one but my computer wont recognize it. what gives?they are the same player zen micro ohoto 8 gigs

It should work fine. Both my Microphoto's work connected on XP Pro at the same time, I just have to keep track of which one has what kind of music. Have you tried scanning for plug and play devices, what kind of operating sys are you running? And what software are you trying to sync with.
Message Edited by VRevolution on 05-23-200706:45 AM

Can multiple PCs access one remote panel at the same time?

I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
"LabVIEW: Serial port receive buffer overflow.
LabVIEW: The network connection was refused by the server."
My question is: Can multiple PCs access one remote panel at the same time?
Thanks in advance!
Y

Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

Ok I am ready to throw my S3- it drops calls constantly- sent it back, got a new one, now is doing the same thing- HELP???

OK ok I am ready to throw my S3- it drops calls constantly- sent it back, got a new one, now is doing the same thing- HELP???- I know others have had this problem , is there a permanent fix or do i switch phones?

Hi kiz,
I also have the Galaxy S3 and I have not experienced any issues with calls. I want you to have the same experience! As indicated by Ann154 (thank you!), the coverage in your area may have something to do with the quality of your calls. Please provide us with your ZIP code and we'll check the type of coverage in your area. We can also replace the SIM card to ensure that this issue is not SIM card related. If you have not requested a SIM card replacement yet, please follow me and send me a DM with your account number and I will follow up with you to order a SIM card replacement.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

How can I plott data from a text file in the same way as a media player using the pointer slide to go back and fort in my file?

I would like to plott data from a text file in the same way as a media player does from a video file. I’m not sure how to create the pointer slide function. The vi could look something like the attached jpg.
Please, can some one help me?
Martin
Attachments:
Plotting from a text file like a media player example.jpg ‏61 KB

HI Martin,
i am not realy sure what you want!?!?
i think you want to display only a part of the values you read from XYZ
so what you can do:
write all the values in an array.
the size of the array is the max. value of the slide bar
now you can select a part of the array (e.g. values from 100 to 200) and display this with a graph
the other option is to use the history function of the graphes
regards
timo

Complicated Question (see pdf): Use data from one table to find the same data in a second table and take other data from that table and place it in a third table. :)

Similar Messages

Maybe you are looking for