Complied application doesn't work for client (Crystal 2008 & VS 2008)

I am creating a VS 2008 (.NET 2.0) application. I am using Crystal Reports 2008 (v12). Everything works fine on my PC. When I move it to one of my client's computers and try to run a report from within the application it bombs out.
I am loading the reports into the Crystal Reports Viewer as objects. It has always worked in the past.
Thanks for insight
Here is the trace:
System.Runtime.InteropServices.COMException (0x8004180B): The document has not been opened.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.set_ProductLocaleID(CeLocale pVal)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.CreateRptDoc()
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper..ctor()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Initialize()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor()
   at CrystalDecisions.CrystalReports.Engine.ReportClass..ctor()
   at KaneyFoods.Reports.CustomerInvoice..ctor()
   at KaneyFoods.Forms.CRViewer..ctor()
   at KaneyFoods.Forms.Invoices.btnInvoiceByNumber_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

That got me one step closer.
There was another Crystal Reports 2008 runtime installed on the system. It must have been the incorrect one. I installed the one you linked to and I get much further now. Now when I go to view the report I am prompted with a Database Login form. This is weird because I have the credentials hard coded in the program.
TableLogOnInfo logon = new TableLogOnInfo();
            logon.ConnectionInfo.UserID = "webreports";
            logon.ConnectionInfo.Password = "******";
            logon.ConnectionInfo.ServerName = "******";
            logon.ConnectionInfo.DatabaseName = "Canopy3";
            crystalReportViewer.LogOnInfo = new TableLogOnInfos();
            crystalReportViewer.LogOnInfo.Add(logon);
The Database Login form has Server Name filled in correctly, but grayed out. Database is blank and grayed out. Login ID is correct and editable. Password is all asterisks, so I don't know if it is correct. No matter what I do it will not logon.
Thanks,
Mike

Similar Messages

Oracle client 9i doesn't work for windows ordinary user

Hello All,
I've installed oracle 9i client on windows xp. Client software works for user belonging to windows administrators group. it doesn't works for ordinary users not belonging to administrators group. Particularly when i run sqlplus from command line i get following error :
Incorrect environment variable PLUS_DFLT
Program execution error.
i also need access to Oracle ODBC driver.
When i try to configure ODBC source (created by user with administrator privileges) by common user i get following errors :
The setup routines for Oracle for Oracle in OraHome9i ODBC driver couldn't be loaded due to system error code 5
Could not load the setup or translator library
Very appreciate for any help.
Regards Arkadiusz Masny

It sounds like the users on the machine do not have access to the Oracle home directory. Check the permissions of the folder by right properties, select the user and check that they have read and then select advanced. Tick the "replace permission entries....." box and apply. This will re apply all user rights in all folders and subfolders. Try again.
HTH Mark F

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
Sai

In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

Autoreaction doesn't work from client 000 but works from other clients

Autoreaction doesn't work from client 000.
More details coming.   Having trouble getting the thread to post.

We set up a new local auto-reaction.   This is not a central auto-reaction. The auto-reaction writes a
message to the UNIX system log /var/adm/messages when a "Security"
alert i.e. - Logon, RFCLogon, TransactionStart, etc. occurs.
The RZ20 alerts are being properly generated and can be seen in both
the CEN system and the local system. On the local system if I view
all alerts for the MTE using transaction RZ20 and select one of the
alerts and choose Edit -> Nodes ( MTE ) -> Start methods -> Start auto-
reaction method. The auto-reaction writes the message to the UNIX
system log. If I execute the same procedure in client 000 nothing is
written to the UNIX system log.
I've also tried triggering a new alert and running SAPMSSY8 from SE38
while the alert is still in status ACTION_REQUIRED. If I do this from
client 010, an entry is written to the unix system log. If I do this
from client 000, nothing is written to the unix system log. In both
cases, the status of the alert changes from ACTION_REQUIRED to ACTIVE.
Since the System Cyclic program ( SAPMSSY6 ) that triggers SAPMSSY8
always runs in client 000, the auto-reaction never writes the messages
to the UNIX system log.
I have been working on this issue for days. There are several posts and notes relevant to a similar situation with e-mail alerts that are not working from client 000 because SAPCONNECT is not set up in client 000.   However, this auto-reaction does not send an e-mail, so SAPCONNECT set-up should not be necessary.   I've searched Service Marketplace and could not find any notes that resolved the problem either.
I've also checked CCMS Self-Monitoring and cannot find any alerts or errors relevant to this problem.
Does anyone know why the auto-reaction only works from a client other than client 000?
Best regards,
Dave

Dynamic versioning plugin tag doesn't work for Netscape using 1.4.1_01?

When I use dynamic versioning for plugin, for example:
<EMBED
type="application/x-java-applet;version=1.4.1_01"
>
It doesn't work for netscape 7. Although 1.4.1_01 was installed on the machine, the applet was not able to be loaded. Plugin was not found.
Anything wrong with the tag? It is OK for 1.4.1
Thanks

When I use dynamic versioning for plugin, for
example:
<EMBED
type="application/x-java-applet;version=1.4.1_01"
>
It doesn't work for netscape 7. Although 1.4.1_01 was
installed on the machine, the applet was not able to
be loaded. Plugin was not found.
Anything wrong with the tag? It is OK for 1.4.1
ThanksI lost alot of sleep over this!
I finally got it to "seemingly" work
but by NOT using 1.4.1 attribute..
See my HTML example
http://hyperbyte.ab.ca/JavaZone/
While it doesn't work with the 1.4.1
attribute it does work with Netscape
Good Luck!
Sincerely:
Tony Swain
Senior V.P. of Software Development Hyperbyte inc.
http://www.hyperbyte.ab.ca
Netscape DevEdge Champion Devs-Java Newsgroup
snews://secnews.netscape.com/netscape.devs-java

"Speech" doesn't work for Adobe program?

It works well for "get my mail,""empty the trash," etc. But "hide this application" doesn't work in Adobe programs like Photoshop, and Illustrator. Is it supposed to not work?

What was it?

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

Push notifications doesn't work for apps like (fb viber , whatsapp etc ) iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

Sorry, I've forgotten the actions done.
I've restarted the iphone, and I've recovered a previous backup.
Thanks.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

Did you fail to look at the requirements before purchasing?
All sales are final. You can try contacting itunes support and asking for an exception

HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
It's still under 1yr warranty so will have to take to a dealer.
I'm sorry that's not much help for you but at least you know it's not a unique problem.
PC Windows XP

Complied application doesn't work for client (Crystal 2008 & VS 2008)

Similar Messages

Maybe you are looking for