Component allocation changes in routers

Does anyone know if components allocations in a router can change without making the change in the router. My users are stating that they have a printout in October with the component allocations being one way and then in December they changed. However, they are stating they never made the change in the router. So how is this possible. Because there is no change log in the component allocation section of the router Im having a difficult time proving to them its not the system and its a user error. Any suggestions?

Hi,
If the routing is changed in the production order (by T-Code CO02), it wont show in the CA61 or CA60.
Also the initial data of routing will not be changed. May be because of this only you are not getting anything in the log.
Regards,
Rohit.

Similar Messages

Component allocation change

Dear Gurus,
Is there any t-code for mass change in Component allocation.
thanks,
Tushar Barot

Dear Barot,
In my understanding there is no T Code for mass change of component allocation,check whether any Functional module can
help you or else go for a BDC to change the same.
Regards
Mangalraj.S

Component Allocation Mass Change

Is it possible to mass change, say the backflush indicator, in CEWB for component allocations? If not, any other suggestions?
Regards,
Luiz

Ashok,
Since this deals with routing for configurable material with average of 1500 to 1700 component allocations, I thought CEWB would be the tool to use. But I find no mass change capabilities in the Component Allocation view. Do not know of any other mass change transactions for routings dealing with component allocation.
Regards,
Luiz

Component allocation in routing

In CA02 (Sales order routing) when I go to component allocation more than once then i get following message. It is ok that you only go once in component overview??
Component overview for routing cannot be called up
Message no. CM022
Diagnosis
You want to call up the component overview for the selected routing (group 50000637, counter ). However this is not possible, because earlier you clled up a material component overview for another routing that had the following properties:
It belongs to the same group as the routing you have now selected.
It has been allocated another material or material BOM as the routing you have now selected.
Procedure
As long as you do not call up the component overvierw for the selected routing, you can go on working as usual. To call up the material component overview, proceed as follows:
1. If you have made any changes in the selected plan that you want to save, do so.
2. Cancel editing the routing
3. Start editing routings with the selected routing (group 50000637, counter ) and call up the material component overview

all u have to do is, go to ca02 operation overview. highlight the operation and click on component allocation. there u can see assignment tab. click on that and assign the components from the bom of that header material. it is as simple as this. dont forget to save the routing at the end.
pls try this and come back with more clarity.
cheers
vinay

Component allocation of material components in routing

Dear Sap Gurus,
I am having a finished product in which it contains rawmaterials for making but it in my routing i am having operations of 10, 20,30,40,50,60 ( 10-shearing, 20-bending, 30-welding, 40-grinding, 50-bending, 60-grinding )
but in my routing doing compoent allocation i am using materials from bom which contains components of 10,20,30 for routing operation of 10 and the output of 10 is the input of 20 routing operation so how can i give component allocation in routing whether i should give for routing operation of 10 the bom components so that it can take for routing operation of 20,30,40,50.
whether my procedure is correct or any body can help me how to proceed the above problem.
regards,
muralidhar.t

Murlidhar,
First of all tell me one thing, are you going to identify the inprocess material with a separate material or not?
If you are going to do it, then your query can be answered.
If component ABC is allocated to operation no. 0010, it gets changed to PQR, then you need to first create the code for PQR. Then do GR as a byproduct with movement type 531 & again do the GI with movement type 261 against that order itself.
It's a quite tedious process & normally no one goes for this.
It's better you deal to the initial component & the final product only. If you opt out for in process material codification then in future where there are several stages of the process, you find it difficult & next to impossible.
Go for that if it is having major impact on the process (normally it never be).
Hope this helps you.
SmanS
Edited by: SAP PP Consultant on Mar 30, 2009 12:59 PM

Component allocation in planned order and production order

Hi all,
I want table or Function module for component allocation in production order and planned order.If component changes done in
planned order or production order.
In Table PLMZ and STPO I am getting component which are allocated in routing MASTER DATA.But if after generation of
production order or planned order and I had changed one component in production order then it will not show in PLMZ and STPO
table.
Please reply.
Regards,
Vidyasagar

Dear
Please check the following table :
AFKO         Order Header
AFPO          Order Item Detail -Compoenets
AFVC          Order Operations Detail
AUFG         Allocation Table Sub-Item, Store Group
AUFI           Allocation Table, Document Sub-item, Store
AUFK          Order master data
RESB
FM: CO_BC_INSERT_CMP_OF_ORDERS . BAPI : BAPI_PRODORDCONF_GETDETAIL.
Refer : Change components and Routing of production order
Edited by: Jiaul Haque on Dec 13, 2010 7:54 PM

Component Allocation in Routing is missing

Dear PP Gurus,
We are using R/3 4.7 version and we are facing a serious problem in Routing Comp. Alloc. since few years. There are 3 to 5 operations in the Routing and about 20 to 30 BOM components, each components are assigned to their respective operations. But after a few days, component allocations for some materials would be gone. So the user needs to do the assignment again from time to time.
They don't even changed the BOM and there's only 1 person who is maintaining the Routing. So we don't assume that somebody has removed the component allocation. Besides, we have activated the Change Management in Routing since then, and we are able to see the history changes in the Routing.
If this is a System Bug, do you know any patches or OSS note that could fix the problem?
Thanks,
John

Dear John,
I don't think that is a system bug.
I believe that is your master data.
You could start to researh from material master - simply use MM04
I also recommend to check out the relevant BOM changes. Look after routing changes as well.
Before to do that, go to SU01 and get all users who able to do such things.
(some users could break the process just done a 'little' adjustment)
Good luck!
p.s. just in case - have you done any updates recently? ask you basis guys

Function module/BDC/BAPI for Component allocation operation wise

Dear Experts,
I need your help on Component allocation in Routing (CA02) per opertion wise.
Currently we are assigning the Component individually per operation manually
The problem is if a BOM is having 500 Components/Materials and there are 10 operations then we need to assign these 500 components to that particular operation manually which is tedious job & killing a lot of time.
I need your help if any Function module or BAPI or BDC is there to allocate these components per operation wise.
Or any other process which can done easily on this component allocation operation wise
rgds
gsc

Hello GSC, (and of course anyone able to help me)
taking account of the date of the message (2008) i think you have finally encountered a solution to your issue ?
Well, now i have got the same problem than you before.
My requirement is to modify the component allocation in a routing by using change document.
I found the bapi /SAPMP/BAPI_ROUTING_PROCESS. I have spend few days to make it work without success.
Iam still facing error message. Futhermore i have read trough a SAP note that this BAPI could not work properly in some case.
Considering that Iam trying to study other solutions (BDC ?).
Please, i would appreciate if you give me some advice on this problem.
Thank you very much.
Best regards,
C.S

Problem in BOM or component allocation for the Non- codified Item in a PO.

Hi All,
Please advise how to explode a BOM or Assign component in a Purchase order with Item category (L) for a Operation oriented material for which no material code is created from a production order .
Actually in my scenario, no raw material component will send to the Sub -Contract Vendor. Only Assembled operation material lets say operation 20 from a routing ( which is not having material code ) from an In - house production from a shopfloor has to be sent to the vendor to create a operation 30 material , which is also not having a material code." How to explode a BOM or component allocation for the Non- codified Item in a PO".
Kindly give me the IMG settings for the above scenario.
regards,
YK

Hi Prasobh,
Tnx for your suggestion. But, the client external processing routing is not constant activity . Based on the Operation bottlenecks client is sending the operation as external Processing. For Eg., If on first order operation 20 be external , Then in second order operation 20 need not be external. operation 30 may go out for external processing. Client does not want a material code for each operation.
Give your valuable suggestion.
regards,
YK

Custom Pipeline Component stopped changing input filename

Hi
In my project, I have a custom pipeline component to change the input file name. I use it in the receive pipeline decode stage. It was working initially when I had only a receive pipeline and custom pipeline component in my solution. later I introduced
two schemas, an orchestration, map and a send pipeline. The rename is not working anymore. Please help.
receive adapter: FILE
send adapter: FTP
Custom pipeline component: (File Name Setter)
Receive pipeline:
decode: custom pipeline component to rename the filename
disassemble: flatfile disassembler conecting to a document schema
Map:
Schema 1 to Schema 2 (transforms from Windows to Unix format)
Orchestration:
receive message
transform using map above
send message
Exception Handler
Send pipeline:
FlatFile assembler
manibest

May be its not working now, because in the orchestration which you have added,
you’re constructing a new message from the received message and the context properties from the Received message is not copied across to the newly constructed message. So when you use “%SourceFileName%” macro in the send port,
the ReceivedFileName context property is missing in the newly constructed message which is sent out.
So in your Orchestration, while constructing (in MessageAssignment shape) the outbound message from the Received message, copy the context property of the Received message to the newly constructed message. Something like this
//This line copies all the context properties from received message to the outputted message
msgOutputted (*)= msgReceived(*)
//or
//This line just copies the receive file name context property from received message to the outputted message
msgOutputted (FILE.ReceivedFileName)= msgReceived (FILE.ReceivedFileName).
If you’re not using the Orchestration or constructing the new message (even in map), then just add the schemas/orchestration or any pipeline would not affect the ReceiveFileName code. May be in this case, debug the pipeline and also check whether the outputted
message has ReceivedFileName in its context property.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

WRT54G router IP address is the same as my modem's IP address. how to change the routers IP address?

The broadband modem got broken and the ISP changed it to a new modem. Now my problem is I cannot use the router when they changed the modem. The ISP won't provide support since they didn't provide me with the wireless router. I've read through the forum and found that I had to change my router's IP address. WRT54G router IP address is the same as my modem's IP address, 192.168.1.1. I already changed the local IP address of the router to 192.168.1.2, saved the setting, released and renew the ip address. Now, when I connected my internet modem cable to the router, I cannot connect to the internet. I am able to ping 192.168.1.2 but I cannot connect to the ping 192.168.1.1. Please help me do the proper setup.
Thanks!

Hello! I solved my problem but I find the solution so weird. After changing the routers IP address to 192.168.1.2, instead of plugging the modem cable on the Internet port of the router, I plugged it in one of the WAN ports. Presto, it worked. Even my wireless connection is also working.

J4680 was connected to wireless but had to change out routers. now it will not connect. win 7.

My J4680 worked great on my old wireless. I changed out routers and now I can't get it reconnected. I have Windows 7 so the install disk never worked for me. Is there somewhere I can get the Windows 7 install exe so I can configure the wireless through my PC. When I put in the security key on the J4680 keyboard it always fails.

Hi fdouvry,
You can download the printer software for Windows 7 here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-88608-2&cc=us&dlc=en&lc=en&...
If you have a USB cable, you can install the printer as USB and convert it to wireless. Here's the Wireless Getting Started Guide for your printer: http://h10032.www1.hp.com/ctg/Manual/c01441037.pdf
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided.
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Very URGENT : BAPI_ROUTING_CREATE Component Allocation

Hi All,
I want to create a routing using BAPI. I tried using BAPI_ROUTING_CREATE, it is creating operations without any problem.
But when I want to assign an Operation/Activity to a Component through New Assignment in Component Allocation through BAPI, it is not assigning.
Please let me know what fields should be passed to the Component Allocation Table in the BAPI.
Please help me as it is very URGENT.
Reward Points for useful answers
Thanks,
Harish

Hi,
The componenet allocation will take automatically if you have the BOM created for the Material for which you are creating the Routing.
It will not add the new components.
i too tried but lot of problems with this BAPI.
I prefered recording.
Reward points if it is helpful.

Error in component allocation in BAPI_ROUTING_CREATE to creae routing

Hi
I'm using BAPI_ROUTING_CREATE to create BAPI with component allocation. But my problem is I'm able to create operations but not able to create component allocation. The BAPI is giving me success message, but not creating component allocation.
In the table BAPI1012_COM_C, I'm populating the following fields:
GROUP_COUNTER
VALID_FROM
VALID_TO_DATE
ACTIVITY
BOM_TYPE
BOM_NO
ALTERNATIVE_BOM
ITEM_NO -> value is POSNR field of STPO table
BOM_TYPE_ROOT -> value is same as BOM_TYPE
BOM_NO_ROOT -> value is same as BOM_NO
ALTERNATIVE_BOM_ROOT -> value is same as ALTERNATIVE_BOM
Routing is being created successfully without component allocation.

See BAPI_ROUTING_CREATE / Material Component Allocation
Kanagaraja L

[svn:fx-trunk] 8271: Change the event type of List-based component's change , changing and caretChange events to a new event class: spark.events. IndexChangeEvent.

Revision: 8271
Author:   [email protected]
Date:     2009-06-25 16:25:28 -0700 (Thu, 25 Jun 2009)
Log Message:
Change the event type of List-based component's change, changing and caretChange events to a new event class: spark.events.IndexChangeEvent.
QA: Yes
Doc: Yes
Checkintests: Pass
Mustella: List/DDL/ButtonBar tests pass
Reviewers: Hans & Jason
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/events/IndexChangedEvent.as
    flex/sdk/trunk/frameworks/projects/spark/asdoc/en_US/spark/components/examples/ButtonBarE xample.mxml
    flex/sdk/trunk/frameworks/projects/spark/asdoc/en_US/spark/components/examples/DropDownLi stExample.mxml
    flex/sdk/trunk/frameworks/projects/spark/asdoc/en_US/spark/components/examples/ListExampl e.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/ButtonBar.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ListBase.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/events/IndexChangeEvent.as

Are those components in a SWC? I would expect them to also have a namespace
that looks more like http://.....
Otherwise, make sure the path to the components are correct.

Component allocation changes in routers

Similar Messages

Maybe you are looking for