Component allocation in production order not match that in routing

Hi
My problem is that the operation allocated to a component in production order does not match that assigned in routing. For example, component A in the routing (CA03, tab CompAlloc) is allocated to operation 0050, but when we convert a planned order to a production order, component A got allocated to a different operation, say 0020. I have no idea how that happened. Can anyone help?
Thanks,
Lin-Lin Li

Lin,
One possibility might be, you might be having multiple BOMs for that FG.
The alternative which is assigned in the routing might be different from the alternative read in the order.
Check & revert.
Hope this helps you.
SmanS

Similar Messages

Component allocation in planned order and production order

Hi all,
I want table or Function module for component allocation in production order and planned order.If component changes done in
planned order or production order.
In Table PLMZ and STPO I am getting component which are allocated in routing MASTER DATA.But if after generation of
production order or planned order and I had changed one component in production order then it will not show in PLMZ and STPO
table.
Please reply.
Regards,
Vidyasagar

Dear
Please check the following table :
AFKO         Order Header
AFPO          Order Item Detail -Compoenets
AFVC          Order Operations Detail
AUFG         Allocation Table Sub-Item, Store Group
AUFI           Allocation Table, Document Sub-item, Store
AUFK          Order master data
RESB
FM: CO_BC_INSERT_CMP_OF_ORDERS . BAPI : BAPI_PRODORDCONF_GETDETAIL.
Refer : Change components and Routing of production order
Edited by: Jiaul Haque on Dec 13, 2010 7:54 PM

Component addition in Production order.

Iam doing Sales order Mrp. After that planned order is converted into production order.
Bom components appear in pegged requirements.
In production order change mode I delete some components and refresh MD04. Components disappear from pegged requirement. It is ok
Now In production order change mode I add some components and refresh MD04. Components does not appear in pegged requirement.
I do MRP again but Components does not appear in pegged requirement.
How to get components in Pegged requirement list??

Hi,
Why requirement for new component does not get added when MD50 is carriied out??
While running MRP using T-code MD50, The system will explode BOM and it will do the net reqmt calculations. Since the newly added component is not part of the BOM, that is the reason it is not considered.
After doing Plant level MRP requirement for that component gets generated but it does not appear in pegged requirement of header material??
When you add the component in the production order, it will create the reservation. In the next MRP run only this reservation will be considered and it will plan.
Regards,
V. Suresh

Reader version listed in GUI does not match that of executable file (again)

I posted regarding this issue before (http://forums.adobe.com/message/4817948), but was never able to find an answer.
Presently I am deploying Adobe Reader 10.1.5 via the MSI installer and group policy. The issue is that a user shut down her Windows 7 computer midway though the MSI installation interrupting (i.e. screwing up) the installation process. I had to delete a few registry entries and reboot the user's PC in order to re-initiate the Reader installation (something I've done in the past).
To verify that Reader was installed sucessfully, I browse to the Reader executable (AcroRd32.exe) in Program Files, double click the executable, select About Adobe from the Help menu, check the version number in the information box and see that the version number is 10.1.4 (i.e. the old version that I am upgrading from). However, when I browse to the Reader executable (AcroRd32.exe) in Program Files and and open the file properties, I see that the version is 10.1.5 (i.e. the new version that I am upgrading to).
So the Reader version listed in GUI does not match that shown in the executable property box.
This is the second time that this has happened with a Windows 7 PC. I've never experienced this sort of thing with a Windows XP PC.
Why is the version number different in the GUI? Where is the version number read in from for the GUI? The registry? Can anybody shed some light on this situation?

Let me clarify that the tool posted on http://labs.adobe.com/downloads/acrobatcleaner.html is not the uninstaller for Reader. Instead it is a cleaner tool used for any botched up installation as mentioned above. This utility should only be used in rare circumstances. Instead reader has its own uninstaller which can be used through ARP (Add Remove Programs) in Windows or you can also use the command line "msiexec /x AcroRead.msi" to uninstall Reader.
Thanks,
Vinod

Scrap Quantity component in the production order

Dear gurus,
in the material master of a component i insert the scrap % ( view mrp4) = 10 %.
The field is read by planning Mrp and explosion of bom , but when i inseert this component in the production order manually the system don't read this % and the field "scrap quantity in the component detail of the production order is blank.
Are there a setting for uograde this field ( in the production order ) when i insert MANUALLY the component in the production order?
Example:
1) material master of the component > scrap % (view MRP4 ) = 10 %
2) production order created
3) insert this component quantity 100 pc and the system after read the material master insert 110 pc , and upgrade the field automatically 10 % (as material master)?
Thansk a lot
Daniele Pistilli
PP TEAM

Hi Danielepistilli,
Well there is a lot of difference is there: see you are creating production order for header material which is FG. If you maintained component scrap in material level it will be dependent on BOM quantity which you maintained for the header material.
For example say component x quantity is 50 in BOM. How it will calculate when you run the MRP.
component scrap % is 5% then:
===> (5/100) * 50 + 50
Formula is: Percentage of scrap quantity x original quantity + original quantity
So ===> 52.5 quantity should be come for component
So, the order quantity for the header material will not take this quantity or scrap but if you see individually in MD04 screen for X material you can find this quantity ok.
I hope it clears your doubt and helps you any queries please revert me back.
Regards,
Madhu.G

Component quantity in production order

Hi,
For my finished product component quantity in BOM is 1.386 for the base quantity 100.When am creating the production order for 100 in my component overview of production order screen it is showing component quanitity as 2 instead of 1.386.
Since am not using any rounding value,rounding profile and scrap nad upto 3 decimals allowed in CUNI for particular UOM.
Thanks
P.Srinivasan
Edited by: srinivasan ponnurangam on Dec 23, 2011 12:33 AM
Edited by: srinivasan ponnurangam on Dec 23, 2011 12:35 AM

As I understand even if production order screen it is showing component quanitity as 2 instead of 1.386 ,Internally it is stored as 1.386 only.
So as per knowledge it should not affect anything.
Refer Note 931971 - Decimal places in stocks and stock postings
Also refer
Problem with item/component quantity in BOM

"The installed product does not match the installation source" error

Each time I attempt to use the SL disk to update the Apple drivers in Windows XP SP3 on my MacBook Pro 13" I get the error message posted in the title. I used this same disk successfully to update my MacPro. Anyone know what this means?
"The installed product does not match the installation source. Until a matching osurce is provided or the installed product and source are synchronized, this action can not be performed."

I get the same error, and I have an idea of what's going on.
When I try to install Boot Camp 3, Windows asks me to locate "BootCamp.msi". If I try to uninstall Boot Camp via "Add/Remove Programs", the same prompt comes up.
What I think is happening is that the original installer for Boot Camp 2.0 is being requested. But I have applied the Boot Camp 2.1 update, which has no BootCamp.msi file associated with it.
So I'm at a road block of sorts, unable to install Boot Camp 3.0. I cannot download the original Boot Camp 2.0 installer from Apple, only the 2.1 update. (I recently moved across the country and didn't bring my 10.5 media.)
Any ideas out there on what can be done to get Boot Camp 3.0 installed?
Message was edited by: Human Being

Batch Determination for a component of a Production Order

Hello All,
I need to determine the batch for a given component of a Production Order in my report.
Like in tcode CO02 we provide the production order and select the component from the list and do the Batch Determination , i need the same functionality in my report.
Currently i am fetching all the components of a PO entered by user on the selection screen of my report. Know the user selects the component and press on Batch determine button to fetch the batch value.
Can anyone please let me know if there is any FM or class or BAPI for the same .
I tried using FM VB_BATCH_DETERMINATION but the passing of parameters is not correct... still working on it.
Thanks & Regards,
Ravi Aswani

Hi,
Will you share steps you have completed so far for doing for Batch Determination?
It will help us to find the missing part..
- Check all the Batch Characteristic values are maintain in the Batches.If values are missing then also Determination will not take place.
- Check whether you have maintain Sort rule to Batch Determination strategy or not
Regards,
Dhaval

To issue the component to the Production Order

Hello All,
I have assigned the component to the Operation of Production Order from Different plant(say 1100) of Same company code(1000).
I want to issue that material from that plant to this plant (say 1000) of Production Order.
So my question is the correct method of directly issuing the component to this Production Order of different plant.
Shailendra

Hi HAdkar
The correct procedure is .
You have to assign special procurement key 80 in material master for which you want to procure from plant 1100. The material master of procuring material should exist for the plant 1100. While running MPR the procurement proposal will be automatically created in the 1100 plant. From 1100 plant you do stock transfer to your storage location. Then finally do GI for the header prod order in you plant.
This is the procure in SAP. Eventhough both the plants exist in the same compound.
Regards
J . Saravan

How to create a manufactured component in a production order network

Hi,
I've been facing problems to create a subnetwork in a production order. I want to add a manufactured component at a production order network.
Does anyone know any BAPI or FM to solve this problem?
Thks,

I tried to use the below FM sequence, but I just create no-manufactured compenents. However this tried was failed too, becaus a couple of fields was missing when I go to CO02 transaction.
CO_XT_COMPONENT_ADD
CO_XT_ORDER_PREPARE_COMMIT

HT2736 I can't use my Australian iTunes Card on my Australian laptop. I get a message saying "Your iTunes store (US) does not match that of your gift certificate (Australian)".

I can't use my Australian iTunes Card on my Australian laptop.
I get a message saying:
"Your iTunes store (US) does not match that of your gift certificate (Australian)".

You can't redeem that certificate in another country's store. You also can't change the iTunes Store country with an unspent balance.
(72677)

Determine a component in the production order

Hi,
To determine if a component in the production order is relevant for the paint dispatch list:
For a Production Order, after retrieving all the components (children) of the header material utilize function module CLSE_SELECT_AUSP. Pass the following information under the import parameters:
Function Group: CLSE
Function Module: CLSE_SELECT_AUSP
Import Parameters:
KLART   = 001   (Hard-coded) (ZERO, ZERO, ONE)
     OBJEK =    (Component number from production order Item) – RESB-MATNR
MAFID = O (Hard-coded) (The letter O)
          KEY_DATE = (BOM Explosion Date) – CAUFV AFKO-AUFLD
Returns:
          Table = T_AUSP
          Field = ATWRT
          T_AUSP-ATWRT
Then the following logic should apply:
     IF T_AUSP-ATWRT = OPTPNTD THEN this component (RESB-MATNR) is relevant for the dispatch list.
can any body explain the meaning of this
all replies will be rewarded

Hi,
i got the solution i came to know the meaning of it
thanks

Reader version listed in GUI does not match that of executable file

I have an interesting situation...
I have Adobe Reader X installed on a Windows 7 desktop. When I go to the Reader installation files right click on the executable (AcroRd32.exe) and open properties, I see that the version is 10.1.4.38 and that the update date is July 28th 2012 (Which is consistent with the Reader X 10.1.4 release date). However, when I double click the same executable file and open About Adobe from the Help menu, the information box that appears states that the reader version is 10.1.3.
So the Reader version listed in GUI does not match that of executable file's properties. Very, very strange.
I am fairly sure that the version stated in the property box is correct, but am not 100% certain. So where is the version number read in from for the GUI? The registry? Can anybody shed some light on this situation?

I don't know why you are seeing that, my Adobe Reader 10.1.4 shows this

Your iTunes store ([?]) does not match that of the gift certificate ([?])

My iPad was purchased and registered in the USA. I am on a temporary assignment in Mexico. I purchased a iTunes gift card. When I tried to redeem it I get an error message. "Your iTuens store ([?]) does not match that of the gift certificate ([?])". I seen on another post that I need to change my region. I did that and still get the same error. Any help is much appreciated.
Thank you,
NFREEMA7

If you have a US iTunes account, you cannot use a gift card
from Mexico in that US account. Additionally, you are supposed
to be in the US when using your US account.

Your iTunes store(Kuwaiti) does not match that of the gift certificate(us)

when i entered gift card number i have got this error what should i do ?

your iTunes store(Kuwaiti) does not match that of the gift certificate(us)
The Complete Guide to Using the iTunes Store | iLounge Article < "Gift Cards and Gift Certificates may only be redeemed in the country in which they were purchased."

Component allocation in production order not match that in routing

Similar Messages

Maybe you are looking for