Component Allocation in Rate Routing
Hai,
Similar to CS15 - component where used list, is there any standard transaction wherein it is possible to find out for a component in which all Rate Routing it is being used.
Can someone throw some light on this subject.
Regards,
R. Vijayakumar
Dear Vijayakumar,
There is no standard report available for this, and what you can do is,after executing CS15 for a
component,you will get the Where Used List (Sub-assemblies and the Assemblies).
Download or copy this report into an excle sheet and then pass on these values to CA51 for the task list
type R - Rate Routing.Now say suppose if you input 10 materials and if you are getting only the results
for 8,then you can conclude that the component is been is used in so many rate routing.
Check and revert back.
Regards
Mangalraj.S
Similar Messages
-
Component allocation missing in Routing,
Hi SAP Gurus
The component allocation for a finished material is missing in
Routing. this is particular with usage production BOM's. I have to manually fix it . What can be the error . Pls advise.
regards
KarthikHi,
It seems that the BOM Components are assigned to the first operation of the Routing, but it is not the case.
If you go and see the component assignment to the Fist operation system says no components are assigned.
At the Time of Production Order creation only the BOM components will be assigned to the first operation.
If you assign a Component specifically to any operation, if you go into the Component assignment, then the to which Operation the component is assgned will be seen.
You need to assing components manually to operation..
Regards,
Siva -
Component allocation in the Routing "BAPI_ROUTING_CREATE"
Hi,
I am using the BAPI "BAPI_ROUTING_CREATE" to create a Routing. It works fine creating the operations, Component allocations and updating the Header data Information.
The Problem i am facing is with the allocation of components with Phantom assembly. Can any one help me in passing the Parameters to the BAPI to allocate the components with the Phantom assembly.
Thanks
ShekarHello Nagasekhar,
I am not able to create operations even.
can you please help me out.
i create routings from the data available in file uploaded from system.
i am able to create the routing.
if i give group number only on the first screen of CA03 its showing the task.
But when i give material and plant its saying the Task doesnot exist.
And when i see the operations then it shows nothing.
can you send me your code to [email protected]
Please help me in this regard.
thankyou.
Message was edited by:
Ravikumar P -
Component Allocation in Group Routing
Hello,
I am working on a group routing.
After add the group members in "Material Assignment" in CA02,
i do the "Component Allocation" one by one for each material number.
Is there any method to do it in a group manners or any better method to work on this?
Thank you.
CollinnDear Collinn,
It seems you are having one group routing(same group no and group counter no) for a list of materials.
In this case if the BOM is common for all these list of materials,then making the component allocation to the individual operation
makes sense.But practically the chances for such case is less.
Moreover I would suggest you to make the component allocation manually in the routing. The reason why I doubt is you have to
build the logic if you are going to do the same in the BDC,so the challenge here will be identifying the component no ,along with the
item no and asigning properly to the operation.So this input has to be accurate i the input file which you will be giving for upload.
Correct me If I'm wrong.
Regards
S Mangalraj -
Get routing component allocation
Hi,
In a routing when clicking on button "ComAlloc" we can see list of component allocations.
In a program I need to get this list, I need the links component/operation.
Is there a function module to get component allocations for a routing ?
Thank you.
Julien SCHNEERBERGER.i do not think them there is any standard function module which can do so.
try hitting database tabel : PLMZ in combuination with PLPO and PLAS. -
Function module/BDC/BAPI for Component allocation operation wise
Dear Experts,
I need your help on Component allocation in Routing (CA02) per opertion wise.
Currently we are assigning the Component individually per operation manually
The problem is if a BOM is having 500 Components/Materials and there are 10 operations then we need to assign these 500 components to that particular operation manually which is tedious job & killing a lot of time.
I need your help if any Function module or BAPI or BDC is there to allocate these components per operation wise.
Or any other process which can done easily on this component allocation operation wise
rgds
gscHello GSC, (and of course anyone able to help me)
taking account of the date of the message (2008) i think you have finally encountered a solution to your issue ?
Well, now i have got the same problem than you before.
My requirement is to modify the component allocation in a routing by using change document.
I found the bapi /SAPMP/BAPI_ROUTING_PROCESS. I have spend few days to make it work without success.
Iam still facing error message. Futhermore i have read trough a SAP note that this BAPI could not work properly in some case.
Considering that Iam trying to study other solutions (BDC ?).
Please, i would appreciate if you give me some advice on this problem.
Thank you very much.
Best regards,
C.S -
Error in component allocation in BAPI_ROUTING_CREATE to creae routing
Hi
I'm using BAPI_ROUTING_CREATE to create BAPI with component allocation. But my problem is I'm able to create operations but not able to create component allocation. The BAPI is giving me success message, but not creating component allocation.
In the table BAPI1012_COM_C, I'm populating the following fields:
GROUP_COUNTER
VALID_FROM
VALID_TO_DATE
ACTIVITY
BOM_TYPE
BOM_NO
ALTERNATIVE_BOM
ITEM_NO -> value is POSNR field of STPO table
BOM_TYPE_ROOT -> value is same as BOM_TYPE
BOM_NO_ROOT -> value is same as BOM_NO
ALTERNATIVE_BOM_ROOT -> value is same as ALTERNATIVE_BOM
Routing is being created successfully without component allocation.See BAPI_ROUTING_CREATE / Material Component Allocation
Kanagaraja L -
Component allocation in routing
In CA02 (Sales order routing) when I go to component allocation more than once then i get following message. It is ok that you only go once in component overview??
Component overview for routing cannot be called up
Message no. CM022
Diagnosis
You want to call up the component overview for the selected routing (group 50000637, counter ). However this is not possible, because earlier you clled up a material component overview for another routing that had the following properties:
It belongs to the same group as the routing you have now selected.
It has been allocated another material or material BOM as the routing you have now selected.
Procedure
As long as you do not call up the component overvierw for the selected routing, you can go on working as usual. To call up the material component overview, proceed as follows:
1. If you have made any changes in the selected plan that you want to save, do so.
2. Cancel editing the routing
3. Start editing routings with the selected routing (group 50000637, counter ) and call up the material component overviewall u have to do is, go to ca02 operation overview. highlight the operation and click on component allocation. there u can see assignment tab. click on that and assign the components from the bom of that header material. it is as simple as this. dont forget to save the routing at the end.
pls try this and come back with more clarity.
cheers
vinay -
Routing-LSMW-Component Allocation to task list
Hi Gurus,
I'm creating LSMW to Routing using Standard-Batch Input method, have mapped the required structures.
But I was unable to map the Component allocation to task list.
Is it possible in the standard one else I need to go for some sort customisation.
Can anybody throw some lite on this issue ?
regards
Ram KumarHi,
You will find BIPMZ Batch input structure for component allocation to task list in the standard structure relations (no customizing required). Use the same for your need.
Hope it clarifies your query.
Regards,
Vivek -
Routing Component Allocation and Assignment of Operation/Seq to components
Hi everyone,
We are creating a Order Bom (uses variant configuration) and Sales order routing using CU51.
When in routing component allocation screen using CA02 , we can assign the operation and sequence to the components manually. Requirement is to automate this manual process and assign the operation and sequence to components based on master routing ( template created manually). I have not been able to find any objects (BAPI, FM) which will do this. I see that when operation/sequence is assigned manually to components, the records are created in PLMZ table. But I have not been able to find any objects (BAPI, FM) which will creates records in PLMZ table that can be used to automate this w/o worrying about loosing the integrity of data. If no objects are available , what other information I should make sure that I update along with update to PLMZ table. Going through the recording, I don't see BDC an option for this. Has anyone done this before ? Any ideas on whats the best way to automate this ?
Thanks
RaghuHello Munukala Rao,
I m also stuck up with same problem so please share code your BDC code . -
Component allocation of material components in routing
Dear Sap Gurus,
I am having a finished product in which it contains rawmaterials for making but it in my routing i am having operations of 10, 20,30,40,50,60 ( 10-shearing, 20-bending, 30-welding, 40-grinding, 50-bending, 60-grinding )
but in my routing doing compoent allocation i am using materials from bom which contains components of 10,20,30 for routing operation of 10 and the output of 10 is the input of 20 routing operation so how can i give component allocation in routing whether i should give for routing operation of 10 the bom components so that it can take for routing operation of 20,30,40,50.
whether my procedure is correct or any body can help me how to proceed the above problem.
regards,
muralidhar.tMurlidhar,
First of all tell me one thing, are you going to identify the inprocess material with a separate material or not?
If you are going to do it, then your query can be answered.
If component ABC is allocated to operation no. 0010, it gets changed to PQR, then you need to first create the code for PQR. Then do GR as a byproduct with movement type 531 & again do the GI with movement type 261 against that order itself.
It's a quite tedious process & normally no one goes for this.
It's better you deal to the initial component & the final product only. If you opt out for in process material codification then in future where there are several stages of the process, you find it difficult & next to impossible.
Go for that if it is having major impact on the process (normally it never be).
Hope this helps you.
SmanS
Edited by: SAP PP Consultant on Mar 30, 2009 12:59 PM -
Component allocation in production order not match that in routing
Hi
My problem is that the operation allocated to a component in production order does not match that assigned in routing. For example, component A in the routing (CA03, tab CompAlloc) is allocated to operation 0050, but when we convert a planned order to a production order, component A got allocated to a different operation, say 0020. I have no idea how that happened. Can anyone help?
Thanks,
Lin-Lin LiLin,
One possibility might be, you might be having multiple BOMs for that FG.
The alternative which is assigned in the routing might be different from the alternative read in the order.
Check & revert.
Hope this helps you.
SmanS -
Bom for component allocation in routing
I have created Sales order Bom. When I create normal routing and go for component allocation then system asks for Bom creation.
Why system is not considering sales order bom in Normal routing for component allocation?Hi,
Sales order BOM will not be valid for Production. Eventhough you have created the sale BOM, the system will consider only the Production BOM. So you need to create a Production order BOM also, when you want to create a routing or production order creation.
Regards,
V. Suresh -
Component Allocation in Routing is missing
Dear PP Gurus,
We are using R/3 4.7 version and we are facing a serious problem in Routing Comp. Alloc. since few years. There are 3 to 5 operations in the Routing and about 20 to 30 BOM components, each components are assigned to their respective operations. But after a few days, component allocations for some materials would be gone. So the user needs to do the assignment again from time to time.
They don't even changed the BOM and there's only 1 person who is maintaining the Routing. So we don't assume that somebody has removed the component allocation. Besides, we have activated the Change Management in Routing since then, and we are able to see the history changes in the Routing.
If this is a System Bug, do you know any patches or OSS note that could fix the problem?
Thanks,
JohnDear John,
I don't think that is a system bug.
I believe that is your master data.
You could start to researh from material master - simply use MM04
I also recommend to check out the relevant BOM changes. Look after routing changes as well.
Before to do that, go to SU01 and get all users who able to do such things.
(some users could break the process just done a 'little' adjustment)
Good luck!
p.s. just in case - have you done any updates recently? ask you basis guys -
BAPI For CA02 - Assign Component allocation for routing
Hello Gurus,
I m searching for the bapi for the component allocation in routing.
Since routing is already created my work is to assign component allocation to the operation.
i tried with the BAPI_ROUTING_CREATE and /SAPMP/BAPI_ROUTING_PROCESS
BAPI_ROUTING_CREATE can be used only to create new routing.
But the /SAPMP/BAPI_ROUTING_PROCESS is going to short dump.
So any alternate please suggest.
Please provide sample code to assign component allocation.Please have a look at following thread:
http://scn.sap.com/thread/2084329
Also,check tcode :CWBQM
Regards
Maybe you are looking for
-
About the quality
-
Problem With Package Statement
Hello - I am semi new to Java and I am trying to place two classes I have created into a package. At the top of both classes I have the statement: package mycode.stringtests; I have saved both files into d:\jf\mycode\stringtests and set my classpath
-
Rebuild launch services database in Lion problem
Everytime that i restart the computer (MacBookPro 17" latest model) the "launch services database" in Lion get spoiled and i have to rebuilt it again. Does not happen when login/out. Any idea what the problem could be or if it is a seriuos one. The c
-
Do I need to reinstall Logic to get my loops back?
OK, so I don't know how I did it, but apparently I deleted all my Apple Loops. A long while back I was looking around for free loops, and as far as I can tell, when I downloaded them I must have tossed all the old loops from Logic and Garageband. I d
-
Reducing Video Noise (colored grain)
Is there a way to reduce video noise in FCE and if so, how?