Component allocation problem --Urgent

Dear Gurus !
I am facing one problem as I am having 1 Material with 8 BOM Alternatives and 8 Routing Group Counter . Now I am assigning the components of alt.3 of BOM in the routing Group Counter No. 03 . When i am creating a production order with Routng Group Counter 03 the system is attaching bydefault the components of BOM alt.01 .
I want to avoid Production Version .
Is there any way out to do this..
Regards
Deb

Dear Debjeet,
Please check the following settings,
1.What value have you maintained in the production version selection in OPL8 - Order type dependent
parameters?Is it manual or automatic?If it's automatic then the system selects the first production
version,if multiple production version exists.
2.check what value have you maintained in the BOM selection of that particular material in MRP4 view of
the material master.
Regards
Mangalraj.S

Similar Messages

Very URGENT : BAPI_ROUTING_CREATE Component Allocation

Hi All,
I want to create a routing using BAPI. I tried using BAPI_ROUTING_CREATE, it is creating operations without any problem.
But when I want to assign an Operation/Activity to a Component through New Assignment in Component Allocation through BAPI, it is not assigning.
Please let me know what fields should be passed to the Component Allocation Table in the BAPI.
Please help me as it is very URGENT.
Reward Points for useful answers
Thanks,
Harish

Hi,
The componenet allocation will take automatically if you have the BOM created for the Material for which you are creating the Routing.
It will not add the new components.
i too tried but lot of problems with this BAPI.
I prefered recording.
Reward points if it is helpful.

BAPI_ROUTING_CREATE problems with component allocation of phantom BOMs

I try to create a routing via the BAPI_ROUTING_CREATE and all works fine until I try to do component allocations for phantom BOM lines in the next level.
In my simple BOM I have the following structure:
00004465 (ROOT BOM)
+
+---Phantom_BOM_B (BOM 00004466)
    +
    +---Material_X
+---Material_Y
I only can allocation Material Y and BOM_B but I am not able to allocate the material X instead of the BOM_B, in that case I always get the message "The component to be assigned has not been completely specified".
My COMPONENTALLOCATION Table Code:
T_COM-SEQUENCE_NO = '000000'.
T_COM-OPERATION_ID = '0010'.
T_COM-BOM_TYPE = 'M'.
T_COM-BOM_NO = '00004466'.
T_COM-ALTERNATIVE_BOM = '01'.
T_COM-ITEM_ID = '00000001'.
T_COM-ITEM_NO = '0010'.
T_COM-BACKFLUSH = 'X'.
T_COM-PLANT = '1000'.
T_COM-MATERIAL = ''.
T_COM-BOM_TYPE_ROOT = 'M'.
T_COM-BOM_NO_ROOT = '00004465'.
T_COM-ALTERNATIVE_BOM_ROOT = '01'.
*T_COM-PATH = '000001'.
I hope some can help me to find me, a solution to solve my problem.
Thanks
Jörg

Dear ,
Phantom BOM means which you want to plan interm of Operation Hrs and Issue Componenets but not intereted to Physically Store rather re-ssiue it to Main FG .
Now ,from your requirement it s clear that BOM : 00004465(ROOT BOM) is for your FG (Let Say A) BOM : 00004466 is a SFG (Let say B) as Root BOM component , which is In House produced .
Bascically , If you do not want to *Store B( Phantom BOM) * but want plan the depedent of B ( X, Y , Z etc ) along with A's dependent and also cost of B ( Phantom BOM )   , then the routing hrs /component along will be issued directly to A( Root BOM) ,
So you do not need to create Routing for Phatom BOM and also no componenet alocation required . Better , you can add that routing operation hrs to main routing of the FG .
Hope this is clear
regards
JH

Problem in BOM or component allocation for the Non- codified Item in a PO.

Hi All,
Please advise how to explode a BOM or Assign component in a Purchase order with Item category (L) for a Operation oriented material for which no material code is created from a production order .
Actually in my scenario, no raw material component will send to the Sub -Contract Vendor. Only Assembled operation material lets say operation 20 from a routing ( which is not having material code ) from an In - house production from a shopfloor has to be sent to the vendor to create a operation 30 material , which is also not having a material code." How to explode a BOM or component allocation for the Non- codified Item in a PO".
Kindly give me the IMG settings for the above scenario.
regards,
YK

Hi Prasobh,
Tnx for your suggestion. But, the client external processing routing is not constant activity . Based on the Operation bottlenecks client is sending the operation as external Processing. For Eg., If on first order operation 20 be external , Then in second order operation 20 need not be external. operation 30 may go out for external processing. Client does not want a material code for each operation.
Give your valuable suggestion.
regards,
YK

Problem in Component Allocation using RCPTRA01 for Reference Operation Set

Hello,
I am trying to do Reference Operation Set upload with component allocation using RCPTRA01 program in lsmw.
Even though i assign values to BIMPZ structure fields the component allocation is not happening.
Could u please give some inputs ?
Thanks!
Regards,
Deepali

Hi,
Check this link, if it can help you.
http://help.sap.com/saphelp_45b/helpdata/en/35/a47e3b763e0392e10000009b38f9b7/content.htm
Reddy

Error in component allocation in BAPI_ROUTING_CREATE to creae routing

Hi
I'm using BAPI_ROUTING_CREATE to create BAPI with component allocation. But my problem is I'm able to create operations but not able to create component allocation. The BAPI is giving me success message, but not creating component allocation.
In the table BAPI1012_COM_C, I'm populating the following fields:
GROUP_COUNTER
VALID_FROM
VALID_TO_DATE
ACTIVITY
BOM_TYPE
BOM_NO
ALTERNATIVE_BOM
ITEM_NO -> value is POSNR field of STPO table
BOM_TYPE_ROOT -> value is same as BOM_TYPE
BOM_NO_ROOT -> value is same as BOM_NO
ALTERNATIVE_BOM_ROOT -> value is same as ALTERNATIVE_BOM
Routing is being created successfully without component allocation.

See BAPI_ROUTING_CREATE / Material Component Allocation
Kanagaraja L

Component Allocation LSMW not working for materials having alternative BOMs

Hi Experts,
I have a requirement in Component allocation LSMW.
Component Allocation LSMW was created using a material which do not have an alternative BOM and the LSMW NOT working for materials having alternative BOMs. Currently iam using Batch Input Recording method in LSMW.Can any one suggest me is it possible by recording method in Lsmw. Because in transaction CA02 when we click the CompAlloc button in application tool bar we get a pop up screen with alternative BOM's, we have to choose any of them. If we choose any of the alternatie BOM in the pop up screen then it will be fixed always, but depending upon my flat file value of alternate BOM i need to pick the value. It is not static.
Can any one suggest me is there any BAPI for this requirement.
Your hel will be greatly appreciated.
Thanks & Regards,
Venkat.

Use BDC instead of LSMW, that will solve your problem.

Routing Component Allocation and Assignment of Operation/Seq to components

Hi everyone,
We are creating a Order Bom (uses variant configuration) and Sales order routing using CU51.
When in routing component allocation screen using CA02 , we can assign the operation and sequence to the components manually. Requirement is to automate this manual process and assign the operation and sequence to components based on master routing ( template created manually). I have not been able to find any objects (BAPI, FM) which will do this. I see that when operation/sequence is assigned manually to components, the records are created in PLMZ table. But I have not been able to find any objects (BAPI, FM) which will creates records in PLMZ table that can be used to automate this w/o worrying about loosing the integrity of data. If no objects are available , what other information I should make sure that I update along with update to PLMZ table. Going through the recording, I don't see BDC an option for this. Has anyone done this before ? Any ideas on whats the best way to automate this ?
Thanks
Raghu

Hello Munukala Rao,
I m also stuck up with same problem so please share code your BDC code .

Component allocation of material components in routing

Dear Sap Gurus,
I am having a finished product in which it contains rawmaterials for making but it in my routing i am having operations of 10, 20,30,40,50,60 ( 10-shearing, 20-bending, 30-welding, 40-grinding, 50-bending, 60-grinding )
but in my routing doing compoent allocation i am using materials from bom which contains components of 10,20,30 for routing operation of 10 and the output of 10 is the input of 20 routing operation so how can i give component allocation in routing whether i should give for routing operation of 10 the bom components so that it can take for routing operation of 20,30,40,50.
whether my procedure is correct or any body can help me how to proceed the above problem.
regards,
muralidhar.t

Murlidhar,
First of all tell me one thing, are you going to identify the inprocess material with a separate material or not?
If you are going to do it, then your query can be answered.
If component ABC is allocated to operation no. 0010, it gets changed to PQR, then you need to first create the code for PQR. Then do GR as a byproduct with movement type 531 & again do the GI with movement type 261 against that order itself.
It's a quite tedious process & normally no one goes for this.
It's better you deal to the initial component & the final product only. If you opt out for in process material codification then in future where there are several stages of the process, you find it difficult & next to impossible.
Go for that if it is having major impact on the process (normally it never be).
Hope this helps you.
SmanS
Edited by: SAP PP Consultant on Mar 30, 2009 12:59 PM

Level & path determination for Component allocation in BAPI_ROUTING_CREATE

Hi,
I am facing a problem in determining the level and path which needs to be fed in the BAPI structure of Component allocation in BAPI_ROUTING_CREATE for phantom assemblies and its components.
ls_compall TYPE bapi1012_com_c.
ls_compall-order_lvl       = ls_bomexp-stufe.
ls_compall-order_path      = ls_bomexp-wegxx.
Is there any FM or any logic to find out the same.
Thanks,
Vasudha L

Hi,
I am facing a problem in determining the level and path which needs to be fed in the BAPI structure of Component allocation in BAPI_ROUTING_CREATE for phantom assemblies and its components.
ls_compall TYPE bapi1012_com_c.
ls_compall-order_lvl       = ls_bomexp-stufe.
ls_compall-order_path      = ls_bomexp-wegxx.
Is there any FM or any logic to find out the same.
Thanks,
Vasudha L

Component allocation in the Routing "BAPI_ROUTING_CREATE"

Hi,
I am using the BAPI "BAPI_ROUTING_CREATE" to create a Routing. It works fine creating the operations, Component allocations and updating the Header data Information.
The Problem i am facing is with the allocation of components with Phantom assembly. Can any one help me in passing the Parameters to the BAPI to allocate the components with the Phantom assembly.
Thanks
Shekar

Hello Nagasekhar,
I am not able to create operations even.
can you please help me out.
i create routings from the data available in file uploaded from system.
i am able to create the routing.
if i give group number only on the first screen of CA03 its showing the task.
But when i give material and plant its saying the Task doesnot exist.
And when i see the operations then it shows nothing.
can you send me your code to [email protected]
Please help me in this regard.
thankyou.
Message was edited by:
Ravikumar P

Component Allocation in Routing is missing

Dear PP Gurus,
We are using R/3 4.7 version and we are facing a serious problem in Routing Comp. Alloc. since few years. There are 3 to 5 operations in the Routing and about 20 to 30 BOM components, each components are assigned to their respective operations. But after a few days, component allocations for some materials would be gone. So the user needs to do the assignment again from time to time.
They don't even changed the BOM and there's only 1 person who is maintaining the Routing. So we don't assume that somebody has removed the component allocation. Besides, we have activated the Change Management in Routing since then, and we are able to see the history changes in the Routing.
If this is a System Bug, do you know any patches or OSS note that could fix the problem?
Thanks,
John

Dear John,
I don't think that is a system bug.
I believe that is your master data.
You could start to researh from material master - simply use MM04
I also recommend to check out the relevant BOM changes. Look after routing changes as well.
Before to do that, go to SU01 and get all users who able to do such things.
(some users could break the process just done a 'little' adjustment)
Good luck!
p.s. just in case - have you done any updates recently? ask you basis guys

Function module/BDC/BAPI for Component allocation operation wise

Dear Experts,
I need your help on Component allocation in Routing (CA02) per opertion wise.
Currently we are assigning the Component individually per operation manually
The problem is if a BOM is having 500 Components/Materials and there are 10 operations then we need to assign these 500 components to that particular operation manually which is tedious job & killing a lot of time.
I need your help if any Function module or BAPI or BDC is there to allocate these components per operation wise.
Or any other process which can done easily on this component allocation operation wise
rgds
gsc

Hello GSC, (and of course anyone able to help me)
taking account of the date of the message (2008) i think you have finally encountered a solution to your issue ?
Well, now i have got the same problem than you before.
My requirement is to modify the component allocation in a routing by using change document.
I found the bapi /SAPMP/BAPI_ROUTING_PROCESS. I have spend few days to make it work without success.
Iam still facing error message. Futhermore i have read trough a SAP note that this BAPI could not work properly in some case.
Considering that Iam trying to study other solutions (BDC ?).
Please, i would appreciate if you give me some advice on this problem.
Thank you very much.
Best regards,
C.S

J2EE StartUp Problem, URGENT.

Hi all!
I'm having a problem since friday with the J2EE Engine Startup. The problem is that MMC says me that the server is running but i can access to the server by anyway. The developer trace of the jcontrol process is:
[Thr 2968] Tue Aug 09 13:59:50 2005
[Thr 2968] JControlICheckProcessList: process server0 started (PID:1544)
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -file=C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[04] = -nodeName=sdm
-> arg[05] = -nodeId=2
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2964
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 2968] Tue Aug 09 13:59:51 2005
[Thr 2968] JControlICheckProcessList: process SDM started (PID:1556)
[Thr 1188] Tue Aug 09 14:01:01 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:01:58 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:10:25 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:15:45 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:20:46 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:26:06 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:31:07 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:36:27 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:41:28 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
Then i try to login the visual admin gives me a windows error and the msg_server process shuts down alone. Then i restart that node and agregate the following lines to the trace:
Thr 1188] Tue Aug 09 14:42:25 2005
[Thr 1188] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c      2488]
[Thr 1188] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c      1652]
[Thr 1188] Tue Aug 09 14:42:27 2005
[Thr 1188] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi_r.cpp 8588]
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:32 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:38 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:44 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:49 2005
[Thr 1188] JControlMSConnect: reconnected to message server (toshiba-user/3601)
[Thr 1188] Tue Aug 09 14:48:11 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:53:12 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:58:32 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
I try to login the visual admin again and gives me the following error: "Cannot open connection on host: 191.9.6.22 and port: 50004"
Looking the log and trace files i see the following errors:
- SAPEngine_System_Thread[impl:5]_5##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to toshiba-user/3201(Connection refused: connect)#
- java.net.SocketException: socket closed
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
     at java.net.ServerSocket.implAccept(ServerSocket.java:448)
     at java.net.ServerSocket.accept(ServerSocket.java:419)
     at com.sap.engine.core.port.impl0.ServerSocketListener.run(ServerSocketListener.java:87)
- erver socket listener opened by service on socket encountered error. The listener will be stopped.#2#p4#ServerSocket[addr=/0.0.0.0,port=0,localport=50004]
I dont know whats happening, if somebody knows i hope that helps me. Please is urgent.
Thx and Rgds.
Gregory

Hi, thx a lot both.
Respect the link
http://<hostname>:50<instanceno>00/sap/monitoring/SystemInfo , i cant access it. I cant access by telnet, by visual admin.
In the work folder under \usr\sap\<sid>\JC00 i found that the last updated files are:
- available.txt that contains the following data:
    Unavailable 08.08.2005 10:46:53 - 08.08.2005 10:58:54
    Available   08.08.2005 10:59:54 - 08.08.2005 13:52:54
    Unavailable 08.08.2005 13:53:54 - 08.08.2005 13:53:54
    Available   08.08.2005 13:54:54 - 08.08.2005 14:03:54
    Unavailable 08.08.2005 14:04:54 - 08.08.2005 14:04:54
    Available   08.08.2005 14:05:54 - 08.08.2005 14:34:54
    Unavailable 08.08.2005 14:35:54 - 08.08.2005 14:39:44
    Unavailable 08.08.2005 14:56:17 - 08.08.2005 16:24:13
    Unavailable 08.08.2005 16:28:07 - 08.08.2005 16:29:07
    Unavailable 08.08.2005 16:34:36 - 08.08.2005 17:17:58
    Unavailable 09.08.2005 08:13:36 - 09.08.2005 08:54:33
    Unavailable 09.08.2005 08:57:04 - 09.08.2005 12:46:25
    Available   09.08.2005 12:47:25 - 09.08.2005 13:26:25
    Available   09.08.2005 13:43:56 - 09.08.2005 13:55:56
    Unavailable 09.08.2005 13:56:40 - 09.08.2005 14:04:57
    Available   09.08.2005 14:05:57 - 09.08.2005 16:16:57
    Unavailable 09.08.2005 16:17:57 - 09.08.2005 17:27:12
    Unavailable 10.08.2005 08:10:30 - 10.08.2005 08:35:39
    Available   10.08.2005 08:36:39 - 10.08.2005 09:16:39
    Available   10.08.2005 12:33:51 - 10.08.2005 14:01:51
- dev_jcontrol that contains the information displayed in the developer trace of jcontrol process(and y mentioned above)
- dev_dispatcher that contains the following info:
    [Thr 2664] Wed Aug 10 08:33:04 2005
    [Thr 2664] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2664] JLaunchISetClusterId: set cluster id 5761000
    [Thr 2664] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2664] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 3320] Wed Aug 10 08:33:21 2005
    [Thr 3320] JLaunchISetP4Port: set p4 port 50004
    [Thr 3528] Wed Aug 10 08:33:26 2005
    [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
    [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
    [Thr 3584] Wed Aug 10 08:33:55 2005
    [Thr 3584] JLaunchISetHttpPort: set http port 50000
    [Thr 2664] Wed Aug 10 08:34:02 2005
    [Thr 2664] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
    [Thr 2568] Wed Aug 10 08:34:08 2005
    [Thr 2568] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 3660] Wed Aug 10 08:35:07 2005
    [Thr 3660] JLaunchISetP4Port: set p4 port 50004
    [Thr 3600] Wed Aug 10 08:36:34 2005
    [Thr 3600] JLaunchISetHttpPort: set http port 50000
    [Thr 3612] Wed Aug 10 12:43:40 2005
    [Thr 3612] JLaunchISetHttpPort: set http port 50000
    [Thr 3612] JLaunchISetP4Port: set p4 port 50004
    [Thr 3612] JLaunchISetTelnetPort: set telnet port 50008
- dev_server0 that contains:
    [Thr 2676] Wed Aug 10 08:33:06 2005
    [Thr 2676] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2676] JLaunchISetClusterId: set cluster id 5761050
    [Thr 2676] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2676] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 4296] Wed Aug 10 08:34:58 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 4296] Wed Aug 10 08:35:00 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
    [Thr 4296] Wed Aug 10 08:35:01 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
    [Thr 2676] Wed Aug 10 08:35:07 2005
    [Thr 2676] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 208] Wed Aug 10 08:36:34 2005
    [Thr 208] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
I still dont know whats happening. And i need to solve the problem urgent. I hope u can help me.
Thx and Rgds.
Gregory.

DATE FIELD PROBLEMS - URGENT

I´m having trouble with FormsCentral.
My form is running about 8 months with no problems.
Yesterday people started to complain that the system doesn´t accept any date.
That means the date field restricts date entries, from date dd/mm/aaaa (brazilian format) to another dd/mm/aaaa, but every date that users input in, is considered by the system as invalid, even it´s a correct and valid date right between the interval specified!
I need Help Urgent!!!
I depend on these forms to finish the payrol service from here.
Thanks
I´ll be waiting.
Maurício Galletti
Message was edited by: SNOWMAUSS
It look like the system accepts just dates starting from the date of today.
I´m testing.
Please help.
Thanks
Message was edited by: SNOWMAUSS
It looks like the system have some problem just with the date 20/10/2013?!
I´ve fixed the problem change the interval from 20/10/2013 to another date and used 21/10/2013 to another date and it works!
But I think something is wrong with the 20/10/2013 date?!
To reproduce the erros just create a new form with date feature with this exaclty configurations and the bug appears:
I´ll keep waiting
Message was edited by: SNOWMAUSS

Hi
I´ve concluded that the problem persist if the date interval starts at the
specific date "20/10/2013". Don´t know why?!
Look at the screen capture above, you aks for
Thanks a lot
image: Imagem inline 1
Maurício P. Galletti
Contador
[email protected]
( 55 11 3331-5567
www.cadt.com.br
2013/10/29 Genevieve Laroche <[email protected]>
Re: DATE FIELD PROBLEMS - URGENT created by Genevieve Laroche<http://forums.adobe.com/people/Genevieve+Laroche>in
FormsCentral - View the full discussion<http://forums.adobe.com/message/5797083#5797083

Component allocation problem --Urgent

Similar Messages

Maybe you are looking for