Component Config for RoadMap Tab Description

Hi,
I have the following requirement -
The description on the "NEXT" button in one of the step in a roadmap should be customized. This could be achieved in two ways. One is to change the OTR text for the corresponding alias. But this way the description will also change in another step/page where it is not required to. One more way of doing it is to enhance the method (creating a post exit for the method MODIFY_BUTTONS in the view). But the post exit for this method does seem to work. I believe this is related to Note 1244440.
I was wondering if there is any other way of doing this. I mean using Personalization or Comp Config. Not sure to what extent such a requirement could be achieved using config, because the description should only change for a particular step in the roadmap (which is known only dynamically).
Any suggestions around this would be great. Appreciate your time.
Thanks

Thanks George.
But the "manipulation of text" should be handled in an enhancement (post exit) which does not seem to work.
Is there some place else where I can do this coding? Would it be possible to do anything via comp config?
Any other suggestions??
Thanks

Similar Messages

  • When closing Firefox windows, I would like a warning before the last window closes. The about:config settings do nothing. There is a warning for multiple tabs..

    When closing Firefox windows, I would like a warning before the last window closes. The about:config settings do nothing. There is a warning for multiple tabs... why not for the last window? I do not use tabs... just windows... I have a mouse button programmed for that. It is really irritating to have to restart Firefox all the time and then open the history window because no warning was issued!

    This is ridiculous. I've had this problems for years now and I'm finally walking away from Firefox. I use my keyboards more than my mouse, and how many times does your finger slip and hit Command Q instead of W. How come FF can't reset something as trivial as this? So many people are having problems with this?
    Feels like FF has become too big, too slow and just not cooperative anymore. What a shame, I've been using Netscape/Firefox for 13 years. This is silly.

  • I have tried for new tab page, also done the process from about:config n all, i successfully got the newtab but once i restart firefox i get blank newtab

    i have tried for new tab page, also done the process from about:config n all, i successfully got the newtab but once i restart firefox i get blank newtab not the most visited sites type new tab... plz help

    In case you are using "Clear history when Firefox closes":
    *do not clear the Cache because Firefox will disable the disk cache in such a case
    *do not clear the Browsing History
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    See also:
    *https://support.mozilla.org/kb/thumbnails-on-new-tab-page-are-missing
    The thumbnails on the about:newtab page are generated from the cache, so if the page is not in the cache or otherwise can't or won't (secure pages) be rendered as a PNG image then you will get an empty box.
    *Do not use Clear Recent History to clear data like the cache and the history when you close Firefox
    If there is no history then you get an about:newtab page with empty boxes (no URLs).

  • I want the cursor to be in the address bar when creating a new window; it works for new tabs and in a new private window, but not in safe mode.

    I have tried following the advice offered in the few different threads I have found on this but nothing fixes it. I want the cursor to be in the address bar when I open a new window and/or when firefox opens without restoring a previous session. I fixed the issue for new tabs via about:config but this doesn't work for new windows. I tried safe mode and the problem persists. In new private windows the cursor is in the address bar.

    The search box in about:home steals the cursor. Changing your home page to something else will cause the cursor to start in the address bar for new windows.

  • Sender File Adapter-Content conversion for a tab delimited file

    Hi all,
    I have a FIle to IDoc scenario, where the File is with the structure Header,Detail,Trailer.
    Header and Trailer are with fixed field lengths, whereas the detail records are tab delimited.(Functional spec says delimited by H'05').
    I have given the parameters as follows:
    Header.keyFieldValue     H
    Header.fieldFixedLengths     1,1,4,1,8
    Header.fieldNames     a,b,c,d,e
    Header.endSeparator     'nl'
    Detail.fieldNames     a,b,c,d,e,f
    Detail.fieldSeparator     '0h05'
    Detail.keyFieldValue     LOA
    Detail.endSeparator     'nl'
    Trailer.fieldFixedLengths     1,1,8
    Trailer.fieldNames     a,b,c
    Trailer.keyFieldValue     T
    ignoreRecordsetName     true
    In SXMB_MONI, I get the payload with just the Header and Trailer and not the detail records, even though my file has so many records in it.I m pretty sure, this happens because of my Detail.fieldSeparator parameter.
    Can anyone please help me with this?What is the correct value for this parameter?
    Thanks a lot in advance!
    Anjana.

    first of all make sure with a hex editor that the hex code of the delimiter sign is really 05. This is an odd character, as the normal tab is hex 09.
    when you have confimred it, check online help for file adapter config for the correct entry of hex codes. I think it is something like '0x05',
    Edited by: Stefan Grube on Feb 10, 2011 6:43 PM

  • Spry tabbed panels - Different Hover Class for each tab

    Already posted this in the general Dreamweaver section, but just realized there was a specific Spry section. So, my apologies for the repost.
    I'm setting up spry tabbed panels, and I'm wanting to use an image for each tab, with the text already on it. I've figured this much out by creating a different class for each in the spry tabbed panel css.
    However, I'd also like to have a second hover image for each tab. I'm having trouble figuring out how to set up separate classes for each tab's hover state.
    Any help?
    Thanks.

    Just in case you did not notice the announce at the top of this forum's main page, I have copied it here.
    Announcement: New to Spry, or  the Spry forums?
    Hide Details
    Before you post a topic please verify  that:
    You  are using the latest Spry files
    The latest version of  the Adobe Spry Framework is 1.6.1, this is the same version that ships  with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its  wise to upgrade your files to the latest version. This can easily be  done using the Spry Updater that can be found here.
    Your  question was not asked before
    Using the search  functionality on forums you can easily find out if your question has  been answered before. While you are in search, you can specify the  search locations. The Spry forum can be found under:
    Adobe  Labs > Spry Framework for Ajax
    Yoru question can not be  found in the existing documentation
    Spry provides you  with allot of documentation this can found on different locations. In  the sidebar of this forum you can find a small summary of resources that  will help you on your way.
    If these options do not apply to your question,  please be so kind to also supply the following information in your topic  together with a clear description of your issue:
    What  browsers does this issue occure:
    example: Internet Explorer 8 on  Window 7 and Firefox 3.0 on Mac OSX
    What version  of Spry are using:
    example: Spry 1.6.1 ( the version number can  be found in license header of the .css and .js files )
    What  is the url of your website or page in issue:
    example: http://www.example.com/page/in/issue.html
    Step  to reproduce the issue:
    example: Scroll down till you find the  header "help", there you will see a Spry Accordion. When you click on it  it will not open or close.
    So users can provide you with a  better answer, without having to ask you for further details.
    by Arnout Kazemier at Oct 23, 2009 2:47 PM                        
    landon_tc wrote:
    Actually, I do remember posting that, and have updated it with what worked for me. However, I could not recall posting it in a specific ajax spry forum, so I assumed I just posted in the general forum. Hence the current situation.
    Yeah and my name is not Ben Pleysier.
    landon_tc wrote:
    Any help with the current problem?
    Please have a look at this thread http://forums.adobe.com/message/2662019#2662019
    I hope this helps.
    Ben Pleysier

  • Add the same component in 2 different tabs

    I am trying to add the same component in two different tabs in a tabbed pane. When I add it (programaticaly) the first instance disappears. Is this at all possible. I dont want to clone the component first and then add it.
    Thank you

    In my appllication I have a tab (call it main tab) that includes many components, like a textfield and texteditorpane that form a command line tool, a list of connected clients (names) and several other components in the same tab. Now the user, can issue a command from the command line to open any component in a new tab, for example he might want to open the clients list in a separate tab, while still having an instance of the clients list in the main tab.
    Also when something is updated (for example a new name is added in the list) I want both instances to be updated at the same time (since there is actually one Jlist object there shouldn't be any additional code to do that).
    So far, when i am opening a new tab holding a component from the command line (the one i made), the same component disappears from the main tab.
    I ll try what was mentioned above.
    Edited by: FreshPrince1 on Apr 12, 2010 6:50 AM

  • Documentation Assistant - No Logical Component exists for this analysis

    Hi
    Whe trying to create a analysis with in solution manager documentation assistant i get the error messaage
    No logical component exists for this analysis , verify the analysis project.
    Can anyone tell me how i can solve this,
    Thanks
    Barry

    Hi Barry,
    To solve this issue, you may try steps described below:
    1. Call  Transaction 'SOLMAN_DIRECTORY'
    2. Select your source Solution via single click.
    3. In detail panel, check if there is any valid Logical component in the
    'System Group' Tab.
    4. Add related Logical Component to the Solution, make sure there is val
    id System for at least one role ( Development System e.g. )
    5. Save your Solution.
    6. Try to create Analysis Project from that Solution again and afterward
    screate an Analysis.
    Hope such information can help you solve such issue.
    Kind regards,
    Fabricius

  • Data is not showing Under work center for any tabs

    Hi,
    Initialed EHp1 and done initial and basic configuration using Transaction SOLMAN_SETUP successfully.
    SMD + wily installed successfully in satellite system system
    I can see the satellite system data in Introscope Webview
    Extractor Framework jobs are running fine.
    But for under Transaction solman_workcenter-> Root cause analysis -> workload, trace analysis etc no data is showing.
    1) Under workload analysis -> P07 Enterprise portal ->J2ee
    it's saying that no application data found and for some tabs empty (just white) screen is showing.
    2) Under workload analysis -> P07 Enterprise portal ->Host
    Itu2019s giving "Error loading template 0TPL_0SMD_MPEH_WA_Q0018_H"
    I am able to see only one graph i.e. under workload analysis -> overview tab.
    I have found one warning for managing system for Extractor banned /inconsistent under Extractor FWK administration.
    Best Regards,
    AR

    Hi,
    In SMSY my settings are with old version i.e producte version is solution manager 7.0, i think i need to create again System and logical component by selecting produt name as SAP Solution Manager EHP1.
    Do you think this could be a problem because i got inconsistency for extractor jobs for managing system under Extractor FWK administration.
    in my system BI client is already activated in 001 client.
    and how can we indentify whether Bi client is setup and activated.
    Best Regards,
    AR

  • Drag JTabbedPane out of the main Frame and set scroll bars for the tabs

    hi ,
    Iam working on a Swing application . In it i have Six Tabs added to a single JTabbedPane. all the tabs are different class files . is it possible to drag any of the tabs out of the frame.
    how to add scroll bars for the tabs individually. i have tried adding JScrollPane to the main frame and add the JTabbedPane to the Scrollpane . the scroll bar was not visible and i have tried adding
    all the six tabs to the individual JScrollPanes and add the six scrollpanes to the TabbedPane .
    only the scroll arrows are visible , when i minimised or resized the application the scrollbars were not appearing .
    could any one help me to solve the above two problems.

    just trying.....
    public void mouseDragged(MouseMotionEvent e){
    // this event should be activated only when the Drag goes out of scope of the parent JFrame which i dont know how
    Component c=JTab.getComponentAt(JTab.getSelectedIndex());
    JFrameobj.getContentPane().add(c,"Center");
    }

  • Can't close tab. Don't get an X in tab.ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589) Stack Trace: 0:([object XULElement],[object XULElement],0)

    error msg: ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589)
    Stack Trace:
    0:([object XULElement],[object XULElement],0)

    A work around is goto about:config
    toggle the following line so that it is set to false.
    browser.tabs.animate

  • Passing arguments/data for a tab click

    Hi,
    Is there a way to modify state, or pass arguments (set item values) when a tab is clicked?
    The intent is to make specific data values (e.g.. items on the source page) available to the tab target page - and only the tab target page since there are multiple tabs available.
    Thanks for all and any help !!
    sinclair

    You cannot specify a URL (javascript: or any other) for a tab target, it has to be a page in the application.
    Don't think of session state as a bunch of global variables that you have to avoid, this is not a programming language. Session state is managed automatically by the HTML DB engine, once an item is saved into session state, its value is available for use by any other application component.
    Restating my earlier response...
    Values in session state can be referenced from any other page in the application. Why do you need to set values only when the tab is clicked?
    Another idea is to create OnLoad computations on your tab's target page that set whatever values you need.

  • Accessing Component Information for systems connected to Solution Manager

    We currently aggregate system component information for our ABAP systems through the following manual (and tedious) process:
    Log into each ABAP system
    Menu:  System -> Status
    Click Component Information button (magnifying glass icon)
    Retrieve the information:  Component, Release, Level, Support Package Name, Description.
    Recently, we were drilling through Solution Manager Root Cause analysis -> Change reporting and noticed that this information is available for each system.  In the ABAP-Software data store.  This led us to consider if this information is contained within the Solution Manager BW cubes.
    However when we looked at the SMD Change Analysis (thinking this would map to what we saw in the Change Analysis reporting), we didn't see this information.
    So, the question is, does anyone have any thoughts were the Component information for systems is stored in Solution Manager?  Ideally, we would like to tap into this source for our own custom report as opposed to retrieving it manually from each system as I described.
    Thanks,
    Jeff Henke

    Hi Jeff,
    the information about software components (and this is I think what you are looking for) is stored in the LMDB of Solution Manager. Each satellite system sends its component info into SLD (either in an external system or in Solution Manger itself). From there it is redirected to LMDB.
    Try transaction LMDB in Solution Manager. There you have (depending on your SP-Stack) access to several reports to evaluate your landscape.
    Best regards, Alexander

  • Java.lang.NumberFormatException: For input string: "DESCRIPTION="

    Colleagues,
    eBis 11.5.10.2.
    I'm getting a Warning in the concurrent manager when I submit a programme that has an attached xml template. The warning is stating: -
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 2667735 on node BAMBI at 02-SEP-2011 17:32:56.
    Post-processing of request 2667735 failed at 02-SEP-2011 17:32:57 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    ------------- 2) PRINT   -------------
    Not printing the output of this request because post-processing failed.
    When I consult the OPP log in Sysadmin, I can see a not very helpful message: -
    [9/2/11 5:32:57 PM] [UNEXPECTED] [36822:RT2667735] java.lang.NumberFormatException: For input string: "DESCRIPTION="
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
         at java.lang.Integer.parseInt(Integer.java:447)
         at java.lang.Integer.parseInt(Integer.java:497)
         at oracle.apps.xdo.generator.pdf.PDFGenerator.setFont(PDFGenerator.java:629)
         at oracle.apps.xdo.generator.pdf.PDFGenerator.setProperties(PDFGenerator.java:468)
         at oracle.apps.xdo.generator.ProxyGenerator.setProperties(ProxyGenerator.java:1373)
         at oracle.apps.xdo.template.fo.FOHandler.startElement(FOHandler.java:262)
         at oracle.apps.xdo.template.fo.FOHandler.startElement(FOHandler.java:204)
         at oracle.apps.xdo.common.xml.XSLTMerger.startElement(XSLTMerger.java:55)
         at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
         at oracle.apps.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:320)
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:1051)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5926)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3458)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3547)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:290)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [9/2/11 5:32:57 PM] [36822:RT2667735] Completed post-processing actions for request 2667735.
    Now, this isn't programme specific as it's affecting all our BI Publisher reports. Also the specific report I am working on has the option to email. I'm finding that the emails still work and when I open the attachment, they are displaying in PDF format correctly - even though the concurrent manager completes with the above warning. The above warning doesn't let me view the output in PDF from Oracle Financials.
    Any help would be greatly appreciated.
    Thanks

    Maybe check if Metalink note 764180.1 applies? This appears to be a bug fixed with patch 7669965.

  • Config for Production client

    Dear all,
    I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
    In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
    How do we config for Production client to cover this requirements ?
    Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
    Thank you very much.
    Regards,
    Thanh.
    Do not use text message language, the next time your thread will be deleted.
    Read the "Rules of Engagement"
    Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

    You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
    Note 1497640 - Open and close periods in productive client
    You can theoretically put every customizing view there and make it "executable" in a production system.
    Markus

Maybe you are looking for