Component Database Hang
I've stupidly named two component the same name and I'm now having problems with that component. To delete these components, if I try Tools->Database and click on the Components tab, the program hangs and I can only shut it down. I'm not sure if the two problems are related but there's no way I can access the Components tab (Multisim 11.0.2). What do I need to do?
Thanks...Steve
The quick answer is that I don't know if I have a backup. We have full-fledged IT Nazi's here and I'm very limited and what I can do or find out. If you could give me some idea as to where the database is supposed to be and what the size is/filename(s), maybe I can find out where they installed it. I don't think we have a central location for the database, it might be right on my computer (most likely). Then I'd need some instructions on how to reinstall the database because IT here might just wipe my computer and start everything from scratch, when I put in a complaint.
I think I have one dedicated license to this computer and there might be one other license in this facility. Since Multisim is not 'standard', most likely they installed it as a single seat on my computer and wouldn't have a clue how to fix the database other than re-install multisim and all the updates. If there is an easier way to do it, we'd have to tell them how.
Steve
Similar Messages
-
Dear Gurus,
I m facing a database hang issue while performing the scheduled offline backup.I m able to take the online backup.When the backup starts , the database starts to shutdown.When checked in the log of backup it shows in tail as shutting down database.When checked for user trace , it shows message as "Attempting to kill pid xxxxxxx" and keeps on retrying for n no. of times.Then I have to manually kill the backup and restart the application.Then again try for an offline backup.This time it happens smoothly.This activity we did for couple of weeks .But now from past 3 days even after restarting the backup, it goes to hang mode.In other words unable to perform the backup activity.
The message had been raised to SAP from almost 15 days at very high.They every time ask the logs , and say that the data in log is nt providing much info for analysing the issue or cause of hang.Also enabled the traces of 10400 for trace level 1 ,10 some more traces also.But still the output is not helping even them to analyse the root cause.
Its my observation that this issue is occuring only on ABAP+JAVA systems(CRM &BIW)not in ECC.We are on oracle database 10.2.0.0.4 with latest patch set as suggested by SAP for the same issue.
This issue is h
Please suggest me at the earliest.As need to resolve this at the earliest.
Bye.
AmitHi,
No "archive process shutdown avoided" message is there in the log file.
In usertrace i get messages as mentioned below.
bslcrmprddb #more bcp_ora_1257502.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_1257502.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name: AIX
Node name: bslcrmprddb
Release: 3
Version: 5
Machine: 00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 1
Oracle process number: 0
Unix process pid: 1257502, image: oracle@bslcrmprddb
2009-06-05 08:01:36.875
Oracle Instance Startup operation failed. Another process may be attempting to startup or shutdown
Failed to acquire instance startup/shutdown serialization primitive
bslcrmprddb #more bcp_ora_2453676.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_2453676.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name: AIX
Node name: bslcrmprddb
Release: 3
Version: 5
Machine: 00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 2453676, image: oracle@bslcrmprddb
2009-06-06 07:04:22.494
Dynamic strand is set to TRUE
Running with 2 shared and 88 private strand(s). Zero-copy redo is FALSE
bslcrmprddb #more bcp_ora_1495266.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_1495266.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name: AIX
Node name: bslcrmprddb
Release: 3
Version: 5
Machine: 00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 1
Oracle process number: 213
Unix process pid: 1495266, image: oracle@bslcrmprddb (TNS V1-V3)
ACTION NAME:() 2009-06-06 03:00:22.223
MODULE NAME:(sqlplus@bslcrmprddb (TNS V1-V3)) 2009-06-06 03:00:22.223
SERVICE NAME:(SYS$USERS) 2009-06-06 03:00:22.223
SESSION ID:(517.13229) 2009-06-06 03:00:22.223
ksukia: Starting kill, force = 0
ksukia: killed 274 out of 274 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 2 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 1 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 1 processes.
ksukia: Starting kill, force = 0
Please suggest.
Regards,
Amit -
Oracle 10g Database Hanging twice a day
My database server has 10g with MS 2003 server as OS.
Twice a day the database hangs and does disconnects all the users from local and remote locations.
Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data files are, I kept this operation running during weekends but datafile was not added.
Has it anything to do with the MS 2003 server no. of users.
Any other suggestions for SYSTEM Tablespace to be free.
Please reply.
Thanks
Ajaz AhmedHi friends / sameer,
Sorry for the delay. Here is the attached alert.log file Since the data from foxpro was loaded into oracle on to oracle 10 g from 7th may the problem of database hanging started from the next day. I joined the organization on 22nd july.
Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data file is, it does not add. I kept this operation running during weekends but datafile was not added.
Has it anything to do with the MS 2003 server no. of users.
Any other suggestions for SYSTEM Tablespace to be free.
If you can get me your mail id then I can send the
attachment of alert.log file as [email protected] bounces back.
Thanks
Ajaz Ahmed -
Hi,
I have Oracle database 10g my database is hanging and i want to check what locks occur on which table how can i work on this database hanging process.Kindly help...because i am new for this i need good procedure to face this problem..If db hangs there could be a lot of possibilities..
eg. no more space for archive log or datafiles
Locks on table are different. You can look on alertlog and start investigating.. -
What are your future component database plans?
I have been a longtime user of Multisim, Ultiboard, (and Ultiroute) power pro edition. This includes the PartMiner days before NI bought EWB. While component manufacturers commonly have component databases for use in the suites of your competitors, there never seem to be any available for your products. Now, access to these databases would save a lot of time. I don't use simulation a lot because you don't provide behavioral simulators, and my designs mostly include processors or controllers. Even Analog Devices' database, which advertises a Multisim and Ultiroute subset, won't load on my platform. Can you explain why you don't either digest the ORCAD datasets or pursuade Analog Devices, Microchip, TI, et al to provide multisim versions of their data?
I have long been a supporter, and am just seeking to make my life simpler.Hi Thomas.
When you say "MDM as Catalogue", which means utilizing the features available in SAP-MDM(Like Portal iViews) and use it as functionality provided for catalog solutions instead of going for SRM-MDM Catalog - correct me if my understanding is wrong.
If this is the case, then you can simply fetch the records available in the repository and showcase it using portal iviews and
use it for procurement solutions(for SRM-Shopping cart etc) using check out functionality.
But SRM-MDM Catalog is designed specifically for certain functionalities like showing different prices like Contract, Purchase Info records, List price etc which is not possible in portal iviews, Service Catalog for showing hierarchies, showing various types of item types(BOM, SK1, SK2, Components etc). Similarly there are some more features which is available in SRM-MDM Catalog which lacks when we use "MDM as Catalogue"
But still SAP can come up with more features if they have plans to bring up a common catalog solution for various solutions.
Hope this helps.
Regards
Bala -
Oracle 8i database hangs for the same amount during JDBC calls.
Hi all,
I have a Oracle 8i database on solaris. The database hangs for exactly 61 seconds for a random jdbc call from my Java application, i mean there is no particular pattern or a JDBC call for which the database hangs. If i choose to wait for 61 seconds it returns the results from the database but if i try to access the database with another query(SQL Plus) the first query starts executing immediately. Is that a database configuration problem or some thing else.
And i also get some exceptions occasionally( Maximum Open Cursors exception). Are these two related?
Any feedback is appreciated.
Thanks
Hugo VictorI have uninstalled Oracle 8i.
Removed all the services from Windows services by deleting corresponding registry entries and deleted the Oracle folder.
I have reinstalled Oracle 8i, this time i changed the name of global database to oracledb.
I channged the tnsnames.ora file from DevSuite appropriately as:
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mscserver)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORACLEDB)
Still it can't login using scott/tiger authentication.
What may be the problem? Please help.
-Sameer -
Hi all,
May I know what to do when database hangs after shutdown immediate command perform? Can I use kill process command to stop Oracle process?Hello,
see documentation for details of immediate-clause:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/start.htm#sthref589
You can do an shutdown abort instead, but then sql is terminated. You can read details here: http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/start.htm#sthref595
Greets,
Hannibal -
DB:11.2.0.3
OS :Linux 5
My database is in hung state now. I did the below steps
sqlplus -prelim '/as sysdba'
SQL*Plus: Release 11.2.0.3.0 Production on Thu Oct 24 08:18:17 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL> oradebug setmypid
Statement processed.
SQL> oradebug unlimit
Statement processed.
SQL> oradebug hanganalyze 3
Statement processed.
SQL> oradebug hanganalyze 3
Statement processed.
SQL> oradebug tracefile_name
/oemdwlk1/oracle/diag/rdbms/eioemd1/eioemd1/trace/eioemd1_ora_14132.trc
SQL> exit
Getting the below output in trace file
Processing Oradebug command 'hanganalyze 3'
===============================================================================
HANG ANALYSIS:
ERROR: Can not perform hang analysis dump without a process
state object and a session state object.
( process=(nil), sess=(nil) )
As per oracle doc How to Collect Diagnostics for Database Hanging Issues (Doc ID 452358.1).
Note: From 11.2.0.2 onwards, hanganalyze will not produce output under a sqlplus "preliminary connection" since it requires a process state object and a session state object. If a hanganalyze is attempted, the trace will output:
HANG ANALYSIS:
ERROR: Can not perform hang analysis dump without a process state object and a session state object.
( process=(nil), sess=(nil) )
Is something i am missing or there is some different steps.
===============================================================================Level 3 --> will collect HANGANALYZE OUTPUT + DUMPS ONLY THE PROCESSES THOUGH TO BE IN HANG.
This many not be a case of process hang. So check with LEVEL 10 .
Still if you are getting the same error than , you need to contact oracle support.
Thanks,
<mod. action: blog ref. removed, please link to one of your blog entries when it's appropriate>
Message was edited by: Nicolas.Gasparotto -
On performing continuous delete operation database hangs
Dear All,
On performing continuous delete operation , the instance on which delete operation is performed database hangs i.e it does not allows to make new connection and some times on alert log we get ORA-3136 error
Database version 10.2.0.3 , OS : HP-UXvi3
RegardsRefer this thread
ORA-3136 while performing bulk delete -
Hi,
I am working oracle9i and WIndows 2003 Server.Sometimes my Database is Hanged up and i am not able to logint to the Database using PL/SQL. Then i restarted the DB again . After that the error is resolved. But everyday i am geeting this Database Hanging problem...
Server and Network are fine.
Please provide me the solution...
REgs..Hi,
You can see (Diagnosing Database Hanging Issues (Doc ID: Note:61552.1)) on Oracle Metalink.
Adith -
How do I add Analog Devices symbols and footprints to component database?
Hi,
Analog Devices conveniently has a library of their component symbols and footprints for Ultiboard and Multisim. How can I add these to the library?
Is it a drag and drop thing? If so what is the folder location?
If I go thru the available database interface it doesn't allow for selecting footprints outside of the existing library and adding them.
In ultiboard I can open the footprints, but 'save to database' is not an option available.
thanks
RyanI am not sure which file you downloaded, but I downloaded the Ultiboard Zip file (the small 3KB one). Each footprint is an individual footprint and apparently must be added manually to the database in Ultiboard.
How to do this? In Ultiboard, Extact them to a location on your drive and double click the footprint and it will load onto the screen like a normal board would. Now you have to goto DATABASE>DATABASE MANAGER. Once there you right click on USER DATABASE and add a family like say TRANSITORS. Then highlight your new family by clicking on it. Then goto the very top of the and you will see a little yellow "+" . click that and it will give you the option to add a new part from the current design to the user database. That is all you need. The footprint will be in the user database.
The next step is to assign it to the component in Multisim and you will have to refer to a turtorial on the NI Site in order to do this. I will post a link to it once I find it.
I do not know about the other file. Most of the time there are .PRZ files that the only thing you have to do is to go into the database manager of Multisim and select the user database. This will give you the option to do an import. If your files are a .PRZ file then you will be able to import using this option.
I hope some of this helps a little
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day -
Where can I find a listing of all the components in Multisim/Cap and Ultiboard. When I want to put, say a connector on the circuit, I get a list of many components but I don't know what they really are. To learn them, I need to place one in the circuit, transfer it to Ultiboard, and then examine the 3D view.
Is there any madness to the numbering of components? In surface mount technology there are thing like 0805, 1206, 1210, etc that describe the physical size of the component. What else exists?Yes, I agree with you about this. I think this has been discussed before with NI, but I do not remember what they said in reply to it. It may already be on a feature list. If not, it definitely needs to be added.
The way I get my parts dimensions is to select a footprint that I think will work and then transfer to Ultiboard and view it there. If I am not happy with it, then I change it in Multisim and forward annote that back to Ultiboard. I do this in conjunction with any datasheets/parts information I have. This is probably the long way around to do this, but I usually stick with what works for me.
If the datasheet already has a footprint number that is contained in the database then I will use that one. I have run into situations. namely with resistors. where the only thing you have are dimensions and the seller's part book doesn't list anything about a footprint number.
Maybe NI can release an article in their knowledge base that contains this information or point users to somewhere that does have this info.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day -
Weird : Database Hangs without any message in Alert File
Hi
We have production database 10.2.0 , in the last 3 days database database has to be restarted as it hangs without any information in the Alert File.
No trace file is genrated at that time.
Only SYS user Can LOGIN to the database.
I had no other option but to restart
Database is in NO ARCHIVE MODE
There is Enough Space in Temporary Tablespace and all other tablespace.
NO patches were applied to the database
NO parameters has been modified
When i check the CPU usage its normal.
There is Enough Disk Space.
This is procution and i apreciate Help.
Thank Youuser6421665 wrote:
Only SYS user Can LOGIN to the database.
What is the OS ? Windows --> Did you check virus scan or some other process running during that time ?
Unix / Linux --> Is sysadmin running a defrag on the disks or some other OS Utility ?
Do you login as SYS from the server ? Can you login as any other user from the server ?
Hang == Slow ?
>
This is procution and i apreciate Help.
Production database in NOARCHIVE log mode... is interesting by itself, but that is not a question here. -
Database hangs after retrieving some records....
hi,
I create a two level B+-tree index, for the first level i'm using key as logical database name, for the second level B+-tree i'm using some other field in my data. I am retrieving the records based on logical database name. I am using C++ to implement my index.
In the following code i'm retrieving records from database. Program is behaving differently for different logical database names. For example in my database i have around 4 lakhs records with logical database name 'A' and around 1 lakh of records with logical database name 'B'. The following code displays all B records but programs hangs after retrieving some A records.
I'm using PAGE_SIZE=8192, numBuffers=2048, and runnig in Fedora Core3.
DbEnv myEnv(0);
myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
myEnv.set_data_dir("/home/raviov/new/database");
try {
myEnv.open("./", DB_CREATE | DB_INIT_MPOOL, 0);
catch (DbException &e) {
cerr << "Exception occurred: " << e.what() << endl;
exit(1);
db=new Db(&myEnv,0);
db->set_pagesize(PAGE_SIZE);
db->set_bt_compare(compare_int);
dbname=itoa(p);
try
db->open(NULL,
"treedb.db",
dbname,
DB_BTREE,
0,
0);
catch(DbException &e)
cerr << "Failed to open DB object" << endl;
exit(1);
db->cursor(NULL,&cursorp,0);
key=new Dbt();
data=new Dbt();
while(ret=(cursorp->get(key,data,DB_NEXT))==0)
j=*((int*)key->get_data());
q=(*((struct tuple*)data->get_data())).startPos;
r=(*((struct tuple*)data->get_data())).endPos;
s=(*((struct tuple*)data->get_data())).level;
cout<<"position : "<<j<<"\t";
cout<<"start : "<<q<<"\t";
cout<<"end : "<<r<<"\t";
cout<<"level : "<<s<<"\n";
if(ret==DB_NOTFOUND)
cout<<"no records";
exit(1);
if(cursorp!=NULL)
cursorp->close();
try
db->close(0);
catch(DbException &e)
cerr << "Failed to close DB object" << endl;
exit(1);
myEnv.close(0);HI Andrei,
thank you for giving reply, I'm not using any secondary indecies, subdatabases and not using any threads.
the following code displays index...
#include <stdio.h>
#include <db_cxx.h>
#include <iostream.h>
#include <db.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
int PAGE_SIZE=8192;
int numBuffers=2048;
char *itoa(const int x)
char buf[100];
snprintf(buf, sizeof(buf), "%d", x);
return strdup(buf);
int compare_int(Db dbp, const Dbt a, const Dbt *b)
int ai;
int bi;
memcpy(&ai,a->get_data(),sizeof(int));
memcpy(&bi,b->get_data(),sizeof(int));
return(ai-bi);
struct tuple
int startPos;
int endPos;
int level;
main()
FILE *fp;
int i,j,k,l,m,n,total=0;
char dbname[500],filename[500],str [500];
tuple t;
Db *db;
Dbt key,data;
DbEnv myEnv(0);
myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
try {
myEnv.open("/home/raviov/Desktop/example", DB_CREATE | DB_INIT_MPOOL, 0);
catch (DbException &e) {
cerr << "Exception occurred: " << e.what() << endl;
exit(1);
for(n=0;n<=84;n++)
db = new Db(&myEnv, 0); // Instantiate the Db object
db->set_bt_compare(compare_int);
db->set_pagesize(PAGE_SIZE);
strcpy(filename,"/home/raviov/Desktop/GTCReport/code/sequence/splitter/tree/");
strcat(filename,itoa(n));
fp=fopen(filename,"r");
if(fp==NULL)
cout<<"error in opening the file";
exit(0);
while(fgets (str , 500 , fp)!=NULL)
sscanf(str,"%d(%d,%d,%d,%d)",&i,&j,&k,&l,&m);
key=new Dbt(&i,sizeof(int));
if(total==0)
strcpy(dbname,itoa(j));
t.startPos=k;
t.endPos=l;
t.level=m;
data=new Dbt(&t,sizeof(t));
if(total==0)
try
db->open(NULL,
"tree.db",
dbname,
DB_BTREE,
DB_CREATE,
0);
catch(DbException &e)
cerr << "Failed to create DB object" << endl;
exit(1);
total=99;
int ret=db->put(NULL,key,data,DB_NOOVERWRITE);
if(ret==DB_KEYEXIST)
cout<<"key already exist\n";
exit(1);
delete key;
delete data;
total=0;
fclose(fp);
try
db->close(0);
catch(DbException &e)
cerr << "Failed to close DB object" << endl;
exit(1);
myEnv.close(0);
}The following code retrieves the records from database that we had built above...
#include <stdio.h>
#include <db_cxx.h>
#include <iostream.h>
#include <db.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
int PAGE_SIZE=8192;
int numBuffers=2048;
char *itoa(const int x)
char buf[100];
snprintf(buf, sizeof(buf), "%d", x);
return strdup(buf);
int compare_int(Db dbp, const Dbt a, const Dbt *b)
int ai;
int bi;
memcpy(&ai,a->get_data(),sizeof(int));
memcpy(&bi,b->get_data(),sizeof(int));
return(ai-bi);
struct tuple
int startPos;
int endPos;
int level;
main()
FILE *fp;
int i,j,k,l,m,n,total=0;
char *dbname;
char filename[200],str [100];
tuple t;
Db *db;
Dbt key,data;
Dbc *cursorp=NULL;
int ret,x=4;
char *ravi;
int p=84763;
int y=2134872;
int r,s,q,count=0;
DbEnv myEnv(0);
myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
myEnv.set_data_dir("/home/raviov/new/database");
try {
myEnv.open("./", DB_CREATE | DB_INIT_MPOOL, 0);
catch (DbException &e) {
cerr << "Exception occurred: " << e.what() << endl;
exit(1);
db=new Db(&myEnv,0);
db->set_pagesize(PAGE_SIZE);
db->set_bt_compare(compare_int);
dbname=itoa(p);
try
db->open(NULL,
"tree.db",
dbname,
DB_BTREE,
0,
0);
catch(DbException &e)
cerr << "Failed to open DB object" << endl;
exit(1);
db->cursor(NULL,&cursorp,0);
key=new Dbt();
data=new Dbt();
while(ret=(cursorp->get(key,data,DB_NEXT))==0)
j=*((int*)key->get_data());
q=(*((struct tuple*)data->get_data())).startPos;
r=(*((struct tuple*)data->get_data())).endPos;
s=(*((struct tuple*)data->get_data())).level;
cout<<"position : "<<j<<"\t";
cout<<"start : "<<q<<"\t";
cout<<"end : "<<r<<"\t";
cout<<"level : "<<s<<"\n";
delete key;
delete data;
if(ret==DB_NOTFOUND)
cout<<"no records";
exit(1);
if(cursorp!=NULL)
cursorp->close();
try
db->close(0);
catch(DbException &e)
cerr << "Failed to close DB object" << endl;
exit(1);
myEnv.close(0);
} -
Deployment to runtime repository in different database hangs
Hi All
I am facing an issue while deploying to a runtime repository in different database.
I have created a simple mapping,taking data from one schema available in database where OWB is installed, to schema available in different database.I am changing the configuration to the control center available on target database.
source module is associated with control center available on design repository and target module is associated with control center available on runtime repository.
In control center manager,the message displayed at toolbar is "compiling deployment object"..after sometime OWB hangs and nothing happens.
What could be possible reason for that?
Thanks in advance
AvanishI got the problem with OWB 10.1.0.4.0 and I had to install the path 10.1.0.5.0 for make it works !
Maybe you are looking for
-
Trying to upgrade my OS to Yosemite from 10.6.8, but it doesn't want to work.
I have to upgrade my operating system to Yosemite from 10.6.8. I've already checked to see what app compatibility problems I'll have to deal with, so I know pretty much what to expect. But when I go in to the Mac App Store and hit Upgrade Now, it sen
-
Serial Key not working for Adobe Creative Suite 5 Design Premium
I have the serial key for my Adobe Creative Suite 5 Design Premium that I bought in 2011 on my account page. However, when I put the serial number in the installer, it says "This serial number is not valid for this product." I just want access to the
-
Useful help links for BBM on BlackBerry
Here are some useful Knowledge Base help articles for BBM on BlackBerry devices: Unable to change the BBM Display Picture on the BlackBerry 10 smartphone "A temporary server error has occurred error" may be displayed during initial setup of BBM an
-
i have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?
-
From where the sales office data is fetched in Activity moniter for an empl
Hello , An activity is maintained for an employee who has been maintained in CRM .So the sales office data that is displayed is fetched from which table or Tcode.It dislayed automatically while monitering the Activity in Activity Moniter. If i want