Component Inspector Parameters Missing

When I launch the Component Inspector for a Multiple Choice
Interaction, there are no parameters listed under the Parameter
tab. I am used to MX2004, where there was a table and I could fill
in all my values for questions, answers, etc. But now I'm in Flash
8 and that grid isn't there. When I click on the Parameter tab for
a Component Inspector it is a blank slate. Can anyone help? I'm
guessing there is some trick for me to see the fields that I could
so easily fill in with MX2004?
Thanks,
Lauren

Thanks. I expected such answer. But didn't expect Adobe made it silent. I hoped they at least explained something. And what component inspector panel does now? Nothing? Why then Adobe left it... I remember good times with Macromedia...

Similar Messages

Component inspector parameters

I'm making a custom component that extents UIComponent. I've set several of the properties to be Inspectable and they are showing up in the component inspector. But they all show up in alphabetic order, except for the ones that come by default from the UIComponent class -- enabled, visible, minHeight, and minWidth.
I would like to change the order that mine are displayed in and if possible suppress the automagic ones.
Anybody know how to do this?
I tried reordering them in my component definition, but that is overridden.

Okay I found out how to hide the inherited ones using the InspectableList tag. Still haven't found a way to order them....

Runtime Sharing & Component Inspector Bug

I'm not sure if this is a bug with Flash or me doing something wrong. Here are the steps to reproduce:
1) Create "Source.fla"
draw a box on the stage and convert it to a movie clip. Call it "Component"
export Component for actionscript. Give make the class name "Component"
also, check "Export for runtime sharing" and put "Source.swf" in the URL. Click OK.
Next, right click the Component in the library and select "Component Definition..."
click the "+" button to add a parameter, give it the name "label" with type "String". Click OK
Save and test the movie so "Source.swf" is compiled out.
2) Create "Destination.fla" in the same directory
close Source.fla
go to File > Import > Open External Library...
select Source.fla. Click OK
you should see another Library panel show up with the Component symbol in it.
drag the Component symbol from that library onto the stage
save and run it. Everything should be fine: you should see your Component symbol from Source.fla should up on Destination.fla's stage.
3) The Bug!
now, click the imported Component symbol on Destination.fla's stage. And go to the component inspector.
you should see the "label" property we created earlier in step 1
change the value to something other than the default
save and run it.
you should see this compile time error: "Scene 1 1046: Type was not found or was not a compile-time constant: Component."
What's up with that eh? Seems like a Flash bug to me. Unless I'm missing something.
FYI: I'm using Adobe Flash Professional CS5 (11.0.2.489)
Message was edited by: RovertNnud

Yep, the problem definitely still exists in CS6 12.0.2.529. I have hundreds of source files for lessons being used by students from PA to TX, and this BUG is making it impossible to work with the files.
First of all, if a library object is imported for runtime sharing, then it shoudl be loaded from that external source when the file is opened, and flash should keep a file system watcher on the source RSL file so that when it changes, it automatically updates the library definition.
Furthermore, the "Authortime Sharing" seems to handle these updates automatically, but it requires a source FLA file, and once you set one, there's no way to unlink from it. If you decide you don't want to use Authortime Sharing, and just use the "import for runtime sharing" option instead, you're screwed. There is no way to unassociate a file from a source FLA once you choose one. This needs to be fixed immediatly, or RSL and Authortime sharing are useless in Flash CS6.
Did you guys somehow patch CS5.5, without carrying the fixes forward to CS6? lol. This is confusing.

Color Picker in Component Inspector

I want to add a parameter to a custom component which uses
the Color Picker in the Component Inspector. I would prefer to be
able to define the component parameters with the class(rather than
manually adding/subtracting the parameters).
However, there seems to be a conflict between the parameter
type 'Color' and the Color class.
To replicate this problem:
1. Define a symbol's class with the attached 'test' class.
2. Define the component parameters in the 'Component
Definition' for the class with the same 'test' class.
3. Drag the symbol to the stage.
4. Click on the symbol, and adjust the color parameter in the
Component Inspector(important step, otherwise it doesn't try and
set the color)
5. Run - receive "1067: Implicit coercion of a value of type
int to an unrelated type fl.motion:Color." error.
The only way I can see of resolving this seems more like a
hack - to remove the "test" class from the Component definition,
but leave the color parameter there. Now, to adjust the color
variable in the 'test' class to expect an int, rather than Color.
However, I would much prefer to keep the test class in the
Component definition, rather than manually changing the parameters.
Feels like this area of component parameters is on the
fringes of documentation, and even maintaining (this apparent
conflict between Color class and Color parameter type a case in
point).
Anyone any ideas/comments?

i would hope that defining a parameter as an int wouldn't
default to a color picker!
You're seeing a color picker because you initially defined
the parameter as Color. If you go back into Component definition
and hit OK, the parameter input type will update. (so long as you
have 'test' set up as the Definition class)
Alternatively, if you were to go through the 'replicate this
problem' steps above, but with your class, you won't see the Color
Picker.
As i said earlier, I'm aware that if i was to remove test as
Definition class, and either set up an alternative class as
definition class, or manage the parameter definitions manually, i
could fudge a solution to this problem.
I would like to know - is this hack necessary, or is there a
more conventional solution? I think it would make the most sense if
my component parameters could be defined by my class.
And I'm curious to know - what are we seeing here? Am I right
in thinking that there appears to be a conflict between the
parameter definition type 'Color' and the fl.motion.Color
class?

Quiz Template - Component Inspector

The current quiz template on the drag and drop section on the
component inspector has 8 instances. How can I change that to add
more, like 16 or 30? I don't see any way to edit it.
Would appreciate any help.
Thanks

It gives you a wider variety of parameters than you would see
in the properties pane; and sometimes there are wizards for the
particular component, available when you click the button with the
wand/star on it.
That's enough for me to use it!

Buggy Component Inspector window

This has been an insane issue for years now and I was hoping they'd fix it by now, but no. When you adjust the columns in the Component Inspector window, then try to adjust a parameter, then the inspector scrolls you like 200 pixels out to the right in the panel, rendering it mostly useless. The only way to get it to behave that I know of it to reboot Flash. This is ridiculous. Does anyone know of any solutions?
Any input appreciated,
Thanks,
Dan P.

It gives you a wider variety of parameters than you would see
in the properties pane; and sometimes there are wizards for the
particular component, available when you click the button with the
wand/star on it.
That's enough for me to use it!

Component Inspector bug

ARGH. I would've hoped they'd've fixed this by now. In the
component inspector, if I make the "Name" column wider, and if I've
got an array item in there with several items, when I click on the
Value column for anything, it scrolls the whole table of data to
the far right (accomodating the width of the array item, but
pushing the variable names off out of the left side of the window,
so I can't see them. It's really annoying when I'm just trying to
access a boolean or other droplist and can't see the variable name
to the left. It's not the end of the world, but really annoying.
Anybody know how to make it stop?
Dan P.

It gives you a wider variety of parameters than you would see
in the properties pane; and sometimes there are wizards for the
particular component, available when you click the button with the
wand/star on it.
That's enough for me to use it!

Component Inspector not selecting

I'm using Flash CS4. When I press Shift+F7 to bring up the component inspector, it tells me to select a component even though it displays the component name: Select a component instance to edit its parameters, bindings or schema in this panel. So I can't edit the parameters. Why does this happen? Thanks.

Hi,
Increasing memory of JDeveloper IDE ,
See
http://oracle-bpel.blogspot.com/2010/06/increasing-memory-of-jdeveloper-ide.html
http://adfhowto.blogspot.com/2010/12/troubleshooting-low-memory-warning-of.html
How to increase memory for JDeveloper
Hope above links will helpful

Component Inspector

hi,
what is Component Inspector

It gives you a wider variety of parameters than you would see
in the properties pane; and sometimes there are wizards for the
particular component, available when you click the button with the
wand/star on it.
That's enough for me to use it!

Calendar Display Issue / Unable to render component: ORA-00936: missing exp

I am trying to display a range of dates in an APEX calendar, where the start and end date are in the record being selected.
The SQL statement works fine in sqlplus, however when put into the calendar renders the error message "Unable to render component: ORA-00936: missing expression".
select task, start_due + l - 1 "date"
from calendar_tasks
, (select level l from dual connect by level <= (select max(stop_date - start_date) + 1 from calendar_tasks))
where
l <= stop_date - start_date + 1 and
task_status = 'SCHEDULED'
Looking to understand this error in the calendar context and any possible solutions.
Thanks!

Try a column alias other than "date" and either not double-quoted or in upper case if double-quoted.
Scott

Location of Component Inspector tool in EP7

Hello,
I would like to know where the <b>component Inspector tool</b> is located in EP7 portal. I have uploaded a PAR file, but I cant find the Component Inspector tool to run it. Before, this tool used to be inside the Java Developer Role, but we dont have that role available in our portal.
Basically, our requirement is to execute a PAR file that we have uploaded? How to do that?
Thank you.
R

Hi,
It should be installed. Check:
System Administratio -> Support -> Support Desk -> PCD -> PCD Inspector
or:
http://server:port/irj/servlet/prt/portal/prtroot/com.sap.portal.pcd.admintools.pcd_inspector.default
br,
Tobias

Error :Required parameters missing when calling up module MARC_SINGLE_READ

Dear all,
When trying to do the production order confirmation i am getting the error "Required parameters missing when calling up module MARC_SINGLE_READ".How can this error be solved?
Thanks,
Kumar

Hi
Please activate the corresponding programs again. I think you got a short dump for this error, if yes, you can see the program's name there.
Best Regards.
Leon.

The Property Inspector is missing the V Space and H Space fields in DW6 - where did they go?

I just downloaded DW6. The Property Inspector is missing the V Space and H Space fields, therefore I am unable to add space around my images. Suggestions?

It is no longer available because the problem with that was that it applied spaces around the image rather than where the user actually wanted them. You now need to use CSS and apply margins and paddings and target exactly where you want them by using something like this:
img {
    margin-bottom: 0;
    margin-right: 0;
    margin-left: 0;
    margin-top: 0;
    padding-top: 0;
    padding-right: 0;
    padding-bottom: 0;
    padding-left: 0;
img {
     border: 0;
     padding: 0;
The second style is generic to set margin and padding for all four sides.
Good luck.

Component qt is missing

Sir, when i'm installing some apps then it says 'component qt is missing' and after installing the app not opens . Please help what i do...? for installing those apps.

Did you try to install a Qt Framework based app as explained in that other thread, for example Nokia Public Transport? I recommend to do this via the Nokia Suite on a Windows computer.
If that does not help, did you try to install the Qt SIS files, as explained in that other thread?
If that does not help, please
give one concrete example app (and source) so we are able to reproduce
dial *#0000# and give ‘Software version’
remove the battery and give us your (Nokia Product) Code (058…)
how much free space is left on drive C? Menu » Applications » Office » File manager » C » Free

CS5 Component Inspector performance

I'm curious when Adobe are going to repair the performance issues inside component inspector panel in CS5? Scrolling through the properties of some components is ridiculously slow, 486 like slow...

Hi, ya, same issues... Regardless of whether I'm on a fast Mac or a fast PC the component inspector is too slow to be worth my time.
I've switched back to Flash CS4. Is someone from Adobe monitoring these forums? This should get some serious attention...

Component Inspector Parameters Missing

Similar Messages

Maybe you are looking for