Component issue in routing

Hi Experts,
I have 2 operations, 1 is cutting and 2 nd milling(sub-contracting), but I have only one raw material I far as I know we can only issue it to only one operation.
if I issue it to 1 st operation while sub-contracting I see it has no material is sent , but I am sending 10 pieces after cutting.
Please suggest me how to issue to both operations.
Thanks
Satya

HI
sub contracting
Operation subcontracting: Within in-house production if some capacity bottlenecks exists in any operations then you can this job to some vendors to carryout this job at his premises and supply us the semi-finished part. This can be done via control key example PP02 (external processing).
Assembly subcontracting: Total product can be given for subcontracting. We have to give the raw materials to vendors and they would supply the assembly. This can be done with special procurement type 30 with procurement type F.
Assign the BOM material to first operation and then for second operation go for operation sub contracting
Check and revert
Regards
Anupam Sharma

Similar Messages

Custom component issue

Custom component issue
According to customer requirements, we want to get such an effect in the development of custom components:
Drag and drop custom components to the Flex builder work area, it can generate more than the default properties, not just generate "x", "y" attribute.
【Details are as follows】
We design a custom panel "CustomPanel.mxml" in the project development, then drag it into the workspace in the Flex builder development environment.
View the source code found that it can only generate "x", "y" attribute in default. That is:
<ns2:CustomPanel x="105" y="74">
</ns2:CustomPanel>
【Issue】
How can we do that when drag the 'custom component' into Flex builder workspace, we can generate "layout" attribute in addition to "x", "y" attributes?
That is:
<ns2:CustomPanel x="105" y="74" layout="absolute">
</ns2:CustomPanel>
【Note】
The following code will be generated when the "panel component comes with Flex builder environment" is dragged into workspace.
<mx:Panel x="121" y="134" width="250" height="200" layout="absolute">
</mx:Panel>
How it is done?

I am sorry to bother you again.
I have tried the web site content, but it can't helped!
There is a custom component called 'Basket', source code is as follows:
package picnic
import mx.containers.Panel;
public class Basket extends Panel
public function Basket()
   super();
   layout = "vertical";
   setStyle("backgroundColor", 0x00FFFF);
   setStyle("horizontalAlign", "center");
Here it is worked when the attribute "layout" is set to "vertical", but it isn't when "layout" is set to "absolute" !
When the property is set to "absolute" phenomenon is as follows:
Drag component such as 'Button' into "picnic component". It will automatically go to the top left corner position,
just like the 'layout-attribute' is not set.
Why is there such a phenomenon?

Component allocation in routing

In CA02 (Sales order routing) when I go to component allocation more than once then i get following message. It is ok that you only go once in component overview??
Component overview for routing cannot be called up
Message no. CM022
Diagnosis
You want to call up the component overview for the selected routing (group 50000637, counter ). However this is not possible, because earlier you clled up a material component overview for another routing that had the following properties:
It belongs to the same group as the routing you have now selected.
It has been allocated another material or material BOM as the routing you have now selected.
Procedure
As long as you do not call up the component overvierw for the selected routing, you can go on working as usual. To call up the material component overview, proceed as follows:
1. If you have made any changes in the selected plan that you want to save, do so.
2. Cancel editing the routing
3. Start editing routings with the selected routing (group 50000637, counter ) and call up the material component overview

all u have to do is, go to ca02 operation overview. highlight the operation and click on component allocation. there u can see assignment tab. click on that and assign the components from the bom of that header material. it is as simple as this. dont forget to save the routing at the end.
pls try this and come back with more clarity.
cheers
vinay

Subcontracting Component Issue Error

HI,
i am creating Sub contracting Purchase order.component qty is issued for unlimited, accepted for PO.
my option is Po Parent qty against Component issued Excess qty not Allowed.
Purchase Order Qty A: 100Pc
Child Qty B : 100PC
Issued qty B :150 Pc is Allowed.
this Child qty are maintained for BOM.
Plz, Explain and Advise the Issue.
By,
Jeevan

Dear,
You can not issue the quanity more than the BOM component quantity with respective to the PO.
Transaction ME2O uses the component quantities from the individual purchase order items. However, it does not set up a stock based on purchase orders (POs). The system therefore does not assign POs directly to quantities either. The evaluation of the SC stock is therefore always a cumulative analysis of all the requirements of a material over time. The "Closing Stock" for each material displays whether there is excess stock or a stock undercoverage at that time, or whether requirements and stock are balanced.
You can set up the SC stock with larger quantities than component requirements exist at that time. This option is often used if, for example, you want to set up buffer stocks for the subcontractor for subcontracting works that frequently recur.
Hop clear to you.
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 19, 2009 12:26 PM

BAPI For CA02 - Assign Component allocation for routing

Hello Gurus,
I m searching for the bapi for the component allocation in routing.
Since routing is already created my work is to assign component allocation to the operation.
i tried with the BAPI_ROUTING_CREATE and /SAPMP/BAPI_ROUTING_PROCESS
BAPI_ROUTING_CREATE can be used only to create new routing.
But the /SAPMP/BAPI_ROUTING_PROCESS is going to short dump.
So any alternate please suggest.
Please provide sample code to assign component allocation.

Please have a look at following thread:
http://scn.sap.com/thread/2084329
Also,check tcode :CWBQM
Regards

Negative Component Issue

Hi
It is mentioned in the oracle inventory management material that There are different ways we can receive inventory in to stock: for instance from manufacturing shop floors by :
- Component Return
- Negative Component Issue
- Assembly Return
My question is:
what is "Negative Component Issue" ? and how could it be performed?
Thanks
Walid

HI,
negative component issue is used to issue negative components from job to inventory.
they are normally used in denoting by products that are produced in a job when performing a job, and usually by products are returned to inv from job.
so negative component issue type is used.
is it clear?

SAP R/3 application component issue

Hi all,
My issue: SAP R/3 application component hierarchy node in RSA6 got saved in $TMP package as local object. When iam transporting the request from Dev to QA this hierarchy is not getting transported and all the application components in ECC QA are assigned under not defined node as individual node.
Not only this when i replicate the data sources in BI side in QA these data sources are replicated but come under unassigned nodes because of the missing main node.
So can any body help me in removing this main node from the $TMP folder and save this in a transpotable package to transport that to QA ECC and the same to replicate in BI.
Regards,
Prabhakar.

Hi Markus,
This issue iam facing in ECC side. Unless untill i transport this application component hierarchy all my application components in ECC QA will be under a not defined nodes.
So please suggest me the approach to resolve this issue.
Regards,
Prabhakar.

Ibase/Component issue while creating a message from satillite system

Hi experts,
we have implemented the service desk functionality in solution manager system.
User is able to create message in solution manager directly.
While creating message from a satellite system IBASE/component fields are filled with incorrect values.
Because of this user unable to create message from satillite system.
Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
Thank you in advance,
Babu

Hi Babu,
For Creating messages in SOLMAN make sure that in T code SM30 under the table BCOS_CUST data is maitained
OSS_MSG W NONE CUST620 1.0
First your should make your solman ready for posting issues within.
Then connect it to ECC systems and try posting issues there.
Do not user Tcode NOTIF_CREATE for posting issues always use HELP- Create Support message.
Thanks
Nand

ABAP Runtime error when doing component assignment in routing creation.

Hi All,
I have a problem in component assignment while creating routing (CA01) by using Copy from function. We are creating a Sale order specific routing for a finished material by copying it from the same material. The Transaction runs very slow and when it goes to component assignment it is taking more than 2 hrs and going to dump.
This finished material is having very high no. of compoents in its BOM. (14000). Pls suggest why this is happening.
Regds
Mahesh

Hi,
You can analysis the Dump error using t-code ST22 with the help of your ABAP consultant. He will be able to explain you why the dump you are getting.
Regards,
V. Suresh

LOADER COMPONENT ISSUE

I noticed that when using the Loader component in Flash 8 -
the following issue:
I have a thumbnail gallery that uses the Loader component to
view the large image.
when i view the site in fire fox it works perfectly (scaling
the content and centering it within the loader component shape)
but when i view it in IE - no scaling or centering occurs!!??
any idea why this is happening and how i can rectify
it?

Hey why don't you try adjusting the permissions and hot
linking protection on your servers control panel? This might be the
problem.

"No valid material component found" when Routing upload using LSMW RCPTRA02

I want to upload routings through LSMW RCPTRA02 incluing routing headers, sequences, operations and component allocations. But systems appears error CM 101 "No valid material component found" . Does anybody occurs the same error before?
The materials truly exists in BOM component.
Sincerely thanks,
Alina

Hi,
What is the status of the BOM? There should not be any problem if the material BOM exists.
Regards,
Krishnendu.

Import Fail crm 2011 to crm 2013 Legacy component issue

Hi All
We are getting issues during organization import from crm 2011 to crm 2013 , the error is
"We have detected the presence of legacy component(s) during upgrade, these components are not supported in Dynamics CRM 2013. Please refer to upgrade log file C:\Users\Administrator\AppData\Roaming\Microsoft\MSCRM\Logs\LegacyFeatureCheck.xml
for more information."
when we check log file it shows the error "ISV folder under CRM Website contains one or more files"
Even we removed everything from ISV folder , Iframe urls from app , solution which is using ISV urls ,plugins and custom workflows but still the error is same
Please help to resolve this issue .
Thank you
Sharique

Hi,
Please refer below blog having details about "Removal of the 2007 Endpoint and Legacy Features"
http://blog.simonjackson.info/2013/07/whats-changing-in-crm-2013-from-sdk.html
The following legacy Microsoft Dynamics CRM 4.0 features will be removed or will no longer be supported in the next major product release:
ISV folder support for custom web applications
Microsoft Dynamics CRM 4.0 plug-ins
Microsoft Dynamics CRM 4.0 client-side scripting
Microsoft Dynamics CRM 4.0 custom workflow activities
Also you can download a tool that can detect legacy feature on your server
http://go.microsoft.com/fwlink/p/?LinkID=309565
Entire documentation is available at below article.
http://msdn.microsoft.com/en-us/library/dn281891.aspx
Hope this helps.
Ajay Chawla

Issue in Router Configuration

Hi All,
While configuring Router we are facing an issue attached. please help me where to recity this dump.
Thanks in advance...
Regards,
Krishna.M

If your router has to renew it's IP Address as required by the ISP very 12 hours then the ISP modem would need to trigger the IP renewal on the router by disconnecting from the router and reconnecting triggering the IP renewal on the router.
Very unusual; what is typically the case is your ISP modem is periodically loosing it's connection to the ISP unregistering either itself or the router.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Mass reversal of one component issued to many production orders

Hello SAP GURUS
One of the common component is issued to many production orders from wrong storage location ie instead of 0002 storage location it got issued from storage location0001,
Is there any way to mass reverse of this common component that got issued to multiple production orders
Thanks & Regards
Himakar Raigir

Dear Himakar,
In my understanding,There is no standard T Code to do this mass reversal.
But in MIGO/MB1A you can do 262 movement to the same storage location from which it was consumed for one single
production order if required or else you have to cancel all the documents using MBST.
Check and revert
Regards
S Mangalraj

Operation subcontracting - excess component issue to vendor

Hi gurus,
Operation subcontracting
Issue of component to operation subcontractor with excess material.
After goods receipt from subcontracting what is the impact at subcontractor vendor stock , costing and financial for excess issue stock.
example
As per BOM component qty (suppose to issue) is 10
After altering in PO issue component qty will be issued 15
At the time of receivable of subcontracting (GRN) where and what is the status of 5 qty?
Regards,
RAM

Do MB1B - Matl Movement Type - 542 w.ref. to P.O(excess 5 qty).
Check stock of subcon. using MBLB.

Component issue in routing

Similar Messages

Maybe you are looking for