Component Loader - how to have 1st image visible

I'm a rookie at Flash, so excuse the simpleness of my
question. By the way, I'm using Flash 8.
I want to use the Component Loader that I gave myLoader as an
instance name. I'm using an action script for each button (which
are thumbnails of my big images) with the on(release)
{myLoader.contentPath - "imagename.jpg";} action. My problem is
that I want the 1st image to show, I don't want a blank clip when
it first opens up. How do I get the first image to show but then go
away when the other images are called. I tried simply putting an
image on my first frame, but then everytime I click on a button to
see a different image, during the time the new image is loading, it
brings me back to the image on frame 1 for a second or 2.

the easiest method is actually right there in front of you.
Take the code you have inside your on(release) (the
myLoader.contentPath...) and simply copy it to the main timeline.
This will cause an image of your choosing to appear first.
Subsequent calls will not show the original image under them if
done this way.

Similar Messages

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

C3-00 how to have the image of the caller "bigger"...

Please let me know when sombody call me, how to have the image of the caller bigger on the screen?
Thanks a lot

Please Help!

How to have posted images display as sRGB on wide-gamut monitors.

I understand an sRGB profile is necessary for posting images but I need help on how to do that with Photoshop CS2 and my new wide-gamut monitor (HP LP2475w with Spider3Express calibration). Before doing a "save for web" and posting, I "convert to profile" to either "sRGB IEEE61966-2.1" or "sRGB with hardware configuration derived from calibration" (it makes no difference which), but I see then a significant color shift in the posted images when I view them through Firefox 3.6 (with operating color management software -verified on other posted images) and the same color shift with IE6 (which has NO color management software). So, Firefox is NOT RECOGNIZING my posted images with the sRGB profiles that I thought I was embedding in them in Photoshop. So my question boils down to: WHAT EXACTLY DO I HAVE TO DO IN PHOTOSHOP SO FIREFOX WILL RECOGNIZE THE POSTED IMAGES AS sRGB and display them 'correctly' on wide-gamut monitors??
Thank you very much.
-Jeff

ISSUE RESOLVED. Photoshop CS2 was not embedding an sRGB profile in the images I was posting. I needed to check the "ICC Profile" checkbox in "save for web" to make that actually happen (after I did "convert to profile" sRGB).
I also have switched to "Full Color Management" Value 1 (hidden) in Firefox 3.6 so that Firefox now assumes any untagged image is sRGB standard and then converts those, and all other images which ARE tagged, to my calibrated monitor profile. This definitely looks to me like the way to operate with a wide-gamut monitor although I understand it is still recommended to always tag images for posting as sRGB and not embed any other profile for color consistency over color accuracy. At least if there are some out there with wider-gamut tags, I should get some benefit.
Have I got it right ?
Thanks,
Jeff

How to have monitor image duplicated with actual print?

I have a Mac Pro 10.8.5 Using lightroom 5 and elements 12. Perform most of "developing" in Lightroom and transfer to Elements 12 to fine tune image and save, etc. I understand to save as using sRGB or RGB but the images are identical. Image is always darker and colors "not the same" as the monitor, kind of flat.
The monitor is ViewSonic high definition. Monitor is calibrated using Color Munki.
Pictures are the same whether using Canon Pro 9000 or prints from off site location. Looking for assistance, please?

Spooky - two very similar questions (http://forums.adobe.com/thread/1389512?tstart=0).
In Edit> Color Settings check it is set for 'Always optimize for printing'.
Check your printer driver settings in case any print enhancement options are set (e.g. my Canon has a setting called Vivid Photo' which changes the saturation of all the colours.
In the Print dialog click More Options and see what you have set under Color Management.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Using load how to have vars at end of url

I am trying to use load in AS3 to load another swf. I can not
get it to pass on anything in the url after 8.swf
for testing purposes I removed root.loaderInfo.parameters.cl
and in its place put what it would =
here is my code. I would really appreciate any help that you
might be able to give
import flash.display.*;
import flash.net.URLRequest;
var rect:Shape = new Shape();
rect.graphics.beginFill(0xFFFFFF);
rect.graphics.drawRect(1, 1, 350, 50);
addChild(rect);
var ldr:Loader = new Loader();
ldr.mask = rect;
var url:String = "
http://www.ironnations.com/led-scroller.swf";
var urlReq:URLRequest = new URLRequest(url + "?cl=rainbow");
ldr.load(urlReq);
addChild(ldr);

There is a space in front of the URL string: Once I took that out your code worked fine.
var url:String = " http://www.ironnations.com/led-scroller.swf";

How to draw an Image on a BufferedImage in a class that is not a Component?

I have an Image object loaded from a file using Toolkit, I want to draw it on a BufferedImage using g.drawImage( x, y, width, height, ImageObserver );
later on I want to save the BufferedImage in a jpeg file using the converter.
Since my class is not a subclass of Component (Panel, Applet, Canvas... ) what do I pass along as ImageObserver, nothing seems to be working, I can draw anything using g.draw... except an Image.
Thanks...
Fco. Espaillat

Try extending ImageObserver. You only have to implement one method, and its hardly an implementation. I ussually have that method return true regardless of what is going on and it works.
But to discourage bad programming style does anyone there know what that method is suppossed to return and how to find that out?

How do i insert a splash screen or a loading screen and a application image for a phone app on Dream

How do i insert a splash screen or a loading screen and a application image for a phone app on Dreamweaver 6, 5.5 had the mobile application setting that is seemingly no longer present? and i also heard you can use animanted backgrounds on the mobile application in dreamweaver 6 but figuring out how to set the splash screen and application image like it was in 5.5 would be nice. All i can get to pull up is the web application i developed i am trying to build into a phone app on google chrome, if i could officially designate it as a phone app where i can set each splash screen and app image to where it is recognized as a phone app that would be really nice.

Duely noted, the server will still not connect, so i have left an inquery in the suggested forum.
Date: Mon, 15 Oct 2012 07:37:34 -0600
From: [email protected]
To: [email protected]
Subject: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    Re: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    created by David_Powers in Developing server-side applications in Dreamweaver - View the full discussion
jmed0411 wrote: the phonegap program loads for quite some time and eventually reaches to the unfortunate conclusion that the server cannot be reached and to please try again. Any ideas on how that problem can be mended if the solution is in my hands?? I haven't used PhoneGap Build recently, but I have seen several reports about problems connecting to the server. One suggestion that I've heard is that there has been unexpectedly high demand on the server since the launch of Edge Tools and Services as part of the Creative Cloud last month. As far as I know, the only thing you can do is wait, and try again later. You could also try posting in the PhoneGap Build forum: http://community.phonegap.com/nitobi/products/nitobi_phonegap_build.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4774799#4774799
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4774799#4774799
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4774799#4774799. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Developing server-side applications in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to load and save a Bitmap Image?

Hi, I have to load a directory of bitmap images, take the background(in this case: light green) and then swap those exact pixels with another image's corresponding pixels, and then save them in the same format(bitmap) in a different directory. Can anybody advise me on which libraries I need to use, and how I should approach this? I need help with every step so any help will be good. Thanks. Basically I need to do the following:
1. Load 2 directories of images(Lets say the images are corresponding like Image1A and Image1B)
2. Take Image1A's green pixels and swap them with the corresponding Image1B's pixels.
3. Save Image1A in a new Directory.
This will go on for however many images there are in those 2 directories. Can anybody advise me how to do this? I need critical help in all three stages. Thanks.
Edited by: Taufiq on Feb 25, 2008 9:10 AM

Taufiq wrote:
Doesn't java handle bitmap images? Does it HAVE to be gif etc. ?
Edited by: Taufiq on Feb 25, 2008 10:17 AMI'm not familiar with windows-specific stuff, but ImageIO supports additional image readers/writers. You should google.
Edit: Actually, I just checked and ImageIO comes with readers and writers for both BMP and WBMP files:
http://java.sun.com/javase/6/docs/api/javax/imageio/package-summary.html

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answers

Upgrade your browser to Firefox 8 and check
* getfirefox.com

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

How do I delete images in Finder's "all my Files" when I have the same pictures in a file in Documents? It seems like a lot of duplication. If I delete the individual image it disappears in the folder. Thank You.

How do I delete images in Finder's "all my files" without deleting the images in a separate folder I have in Documents? It seems to be so much duplication. Just set up our new Mac and am not understanding how the files work. Thank you.

All My files is a "search folder"
it isn't real storage location. All files within your home folder are found by the criteria set for the search folder and displayed to you In one place.
If the folder doesn't meet your needs, remove it from the sidebar.

How do I find images in LR 2.4 (imported from CS4 Bridge) that have color labels already assigned In CS4 Bridge? I have set both Bridge and LR color labels text to match (eg Green for green, etc).

How do you find images in LR 2.4 that have been imported from CS4 Bridge and have been assigned a color label in Bridge? I have set both LR 2.4 and my CS4 Bridge to match the text for each color to be the same (eg. Green for green, etc), and the filter search in LR 2.4 shows that a label has been assigned, but I am unable to identify and locate the specific images in LR 2.4 that have had a color label assigned from CS4 Bridge. I have tried to search via attribute, metadata, text, etc...Is it necessary to re-assign color labels all over again, image by image, in LR 2.4, or is there a way to automatically have the color labels assigned in CS4 Bridge be assigned and searchable to the images after they have been imported into the LR 2.4 catalogue from the Bridge program?

JohnM.
I closed both programs and re-imported photos and re-tried the action of having LR read the XMP metadata from the CS4 files, and it seems to work now just fine...don't know why now and not before, but thanks much. Is there a way to have LR do this automatically upon import of images from CS4? I tried to do this with an import metadata preset, but no luck. It seems as if I can only do this once the images have already been imported into LR, and then to have to have LR read the metadata from the CS4 Bridge files. thanks gain.

How do I have an image move with a text box?

I need to embed an image within a text box so that when I add additional text in the future, the image moves with the text that surrounds it.
For example, if I have a paragraph of text, then on the following line vertically I have an image, then on the following line another paragraph of text ... When I add additional paragraphs of text above the image, how can I have the image track down to stay between the original two paragraphs of text?

Thanks Zak! I figured that out but now have another problem that I just posted. The app keeps locking up when I try to export HTML or upload my site to the server. Please give me any advise on how to handle it.
Here's my other post:
Hi,
I just upgraded to the latest version of Muse. I made a few changes to my site and I'm trying to export the HTML. I've now tried 3 times and the app locks up at 89%. It completes all pages, but locks up there. When I look into the Muse Export folder, there is nothing there. The window reads "Finishing export" but it stays at that point for more than an hour when I finally give up and force quit.
Any ideas? Anyone else having this issue? Any ideas on how to get my HTML exported successfully?
Thanks in advance for any help!
Reply
27 Views   2 Replies   Latest reply: amchambers,      May 26, 2013 9:23 PMWas this helpful? Yes   No
Replies
20 posts
Sep 19, 2012
1.amchambers,May 26, 2013 9:18 PM   in reply to amchambers
Just an update. Previously I was attempting to export HTML to the Muse Export folder on my computer. I described what happened above. Now, I'm trying to publish directly to my FTP site. Its doing basically the same behavior where it exports all desktop pages (189 of them) then it locks up. However, the interesting thing is that when exporting to the Muse Export folder on my computer this said it was 89% complete. When uploading to my server, it says its 59% computer when all pages have been exported. Both options result in the app locking up and never completing the export. I did check my site online to see if the pages were really updated. I made a change to the nav bar on the master so I should see that on every page. It is not showing up online yet even though the app says all 189 pages have been exported. Still looking for help, all advice and ideas will be appreciated! I do want to get my updates online.
Was this helpful? Yes   No
Reply|
Mark as:
CorrectHelpful
20 posts
Sep 19, 2012
2.amchambers,May 26, 2013 9:23 PM   in reply to amchambers
Here's what I have when it locks up. It sits like this for hours.

How to have image instead of blank player screen

I know virtually nothing about Dreamweaver and Flash...I know
how to update page, embed .flv files, etc, and how to encode
videos, but that's it. I am a videographer by trade. I am putting
videos up on my new website and they are not going to be autostart.
How can I have an image instead of a blank screen show on the
inactive player?
Thanks in advance

Hi,
In the VO list of values, check "Include no selection item", choose "Labelled item first of the list" from the drop down and give your custom label.
Thanks

Component Loader - how to have 1st image visible

Similar Messages

Maybe you are looking for