Component material costing (Unit of Measure conversion) is not working at S

Hi,
Unit of Measure conversion factor (Value) is not working for component materials at Sales order level costing, but the same conversion factor is working fine at Standard cost estimation level.
Example:
Conversion Factor for Raw materials (Procurement in Tones, Consumption in Each)
1 Ton (Rs.1000) = 10 Each (per Each u2013 Rs.100)
For Manufacturing of 1 pc FG is required 1 each Raw material
Issue: At sales Order level - Raw material costing is calculated at u201CTonu201D price u2013 Rs.1000 instead of u201CEachu201D price u2013 Rs.100.
Regards
Nagesh

Hi,
Pricing (unit conversion) is done different for MM and SD process.
MM has decided to use the old process which determines the values out of T006. There you have the conversion factors which are used in PO. If you create a sales order or billing document the determination will be different as the material master will be read.
regards
Waman

Similar Messages

Automatically pick material master unit of measure conversion to routing

I maintain finish goods conversion factor in material master u201CAdditional Data: Unit of measureu201D as M to KG and basic unit of measure for finish good in material master is in KG.
I attached multiple operations for the finish goods material in routing.
Some operations base unit of measure is M and others its KG.
I want to pick material master unit of measure conversion automatically when Iu2019m creating routing for the finish good material in ca01. (Unit of measure conversion for header and operation of the operation)
Can anyone letme know the SAP configuration for this.

Hi!,
Please expalin about the purpose of this requirement, because when you will create a order using that routing, at that time system will definately do the unit conversion automatically.
Regards,
Uday

Report on material code, description and all unit of measure conversions

report on material code, description and all unit of measure conversions ?
any ideas?

Material Number MATNR
with this key and SPRAS (the desired Language key)
from MAKT you can get the descriptions..
and with MATNR from MARM you can get alternative UOM and the conversion rates.
If you need help on MARM how to get the conversions please notify.
Hope it helped
Please reward if found useful
Best Regards

Unit of measure conversion for CIN is not relevant for pricing

During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. V

Dear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra

Unit of Measure Conversions.

Hi All, I have Unit of Measure Conversion requirement in my reports, I would like to create a variable and user has an option to choose the Target UoM.
For this I have referred RSUOM T-Code and got an option to create Target UoM Variable (Specifying Target UoM using a variable) but here my proble is, have to do conversion across dimensions as below.
Unit of Measure conversions that I have across dimensions (all conversions both ways):
tonne to kilotonne
1000 GJoule to Million GJoule
kilotonne to Million tonne
tonne to Million tonne
kilogram to tonne
tonne to barrel
kg to liter (spill)
tonne to gallon
Could anyone tell me, is it possible to do conversion Across dimensions? (i.e Mass to Volume), if itu2019s possible where we need to maintain the conversion values.
I am not able to see any table which holds the values of Unit of Measure, I saw T006 but could not able tofind any info.
Thanks in Advance.

Hi Kalyan,
To convert from kg to litres you need material specific information like relative density .
It can not be done with common values in UOM-conversions.
e.g. the relative density for lead (11.35 kg/ litre) is different from the relative density for water (1 kg/litre)
1 tonne = 1000 kgs for every material.
Udo

Material's Unit of Measurment differentin Con & Rec due to Prd Process ?

Hi
We got some byproduct due to the production. So we are planned we will take qty in m2 & stock maintain in kg, because this is child material of another one product, so that time we consumption book in kg wise only u2026.
Finally we want:
      Received: M2
      Stock Maintain & Consumed: kg
If u have any solution, kindly explain step by stepu2026
I hope defiantly u resolved my problemu2026..
Regards
Porsee

Dear Porselvan ,
                 You can resolved it by using alternate unit of measurement.
Now there is two way:-
1. Take KG as Base Unit Of Measurement then Go to work scheduling View & take unit of issue as M2 as well as you put it asks conversion with KG (How much m2 in one KG) and it will make all movement posting By M2 but stock will be keep in KG which will be your Base unit of measurement. For consuming in kG u can put Unit KG in BOM of respective article.
2. Take KG as Base Unit Of Measurement then Go to work scheduling View & take Production unit as M2 as soon as you put it asks conversion with KG (How much m2 in one KG) and due to it Production will happen in M2 remaining all things happen in KG.
           For both these condition you can make movement any of unit which both you given by manual changing but automatically it propose unit as i explained.
Regards.........Rakesh Saxena

Decimal in Unit of Measure conversion

Hi Gurus,
I want to enter decimals in Unit of Measure conversion. System is giving the error that "Decimal not permitted". Actually the scenario is we have a material with KG as a base unit of measure. The ordering unit is "L" litre and the conversion factor is:
1 Litre = 0.792 KG
But when I am going to enter the conversion the system is not allowing to enter decimal. What I need to do in the configuration to enable the decimal entry.
Earliest response will be highly appreciated.
Thanks

>
Imran Khan wrote:
> I have entered 1000 Litre = 792 Kg, but when I order 1Kg, system is converting it into 12.62 Litres.
>
> Thanks
if 792 kg equal to 1000 ltr,
then 1 kg equals to 1,263 ltr.
when do you see this "conversion" to 12,62 litres? in ME21N after you entered 1 KG?
if yes, then your order unit is probably set to liter, further check if you have a rounding profile in material master or info record, that causes the switch from 1,26 to 12,62

Error in units of measurement conversion "BOM"

hello gurus gudmorning everybody
i have problem in project regarding the units   of measurement conversion BOM
this is the scenario: 1000 ft2( BASE UNIT MEASUREMENT) = 1ea (    SALES UNIT) ( 2bed room flat) it is a higher level item
sub items are in EA base unit measurement ex: like one sofa one air conditioner etc instead of taking sale unit measurement of higher level item , its taking base unit mesurement of higher level item , .i.e instead of taking 1EA 2bhk = 1AC, 1 SOFA,   but is calculating 1000ft2( 2bhk)   = 1000ac, 1000sofa , plz help out to rectify the conversion
thank you in advance
venkat

Dear Venkat,
Try with this
Please maintain the alternative unit of measure in sub itemes master data at Additional tab like this
in AC master data 1EA = 1AC and 1AC = 1EA 2BHK
in Sofa master data 1EA = 1 Sofa and 1Sofa = 1EA 2BHK
Now you try
I hope this will help you,
Regards,
Murali.

Routing - decimal places for unit of measure conversion quantity

Hello all,
in the change routing screen in SAP (CA02), when going to a operation detail screen, a unit of measure conversation value can be defined. A value for header and operation can be made.
Currently we cannot set any decimal values for operations, I get the error message: "decimal places are not permitted."
Where in customizing can I change that?
Thanks
Anne

Hello,
thanks for the answers.
The UoM is LB.
I've already checked CUNI, but I can not find LB..?
Also I've noticed other places in SAP, for example the base quantity of some operations in the routing have a numbers with 3 decimal places and the same UoM LB, so this looks like the UoM is setup fine, maybe there are just problems with this special screen?
Thanks
Anne

Cost/revenue rate E_MOE_DEC, 00000000: unit of measure PDA does not exist

Dear community,
I am still working on SAP PPM FICO & CATS integration.
I can't replicate my cost/revenue rate in the ECC system.
There is the error message : Cost/revenue rate (name of the cost/revenue rate) : unit of measure PDA does not exist
Does someone know what PDA is ?
I customized the units with FTE.
Thank you in advance for your help.
Best,
Cassoké

Hi Cassoke,
Through analysis found that you need to define 'Units of Measurement' PDA which is linked to the capacity unit 'FTE'.
Just check whether you have the PDA unit of measurement in tcode-CUNI or under SPRO-->PPM-->Portfolio Management-->Global Customizing-->Global Settings-->Define Units of Measurement.
Select dimensions 'Time' and click on 'Units of Measurement' and if no PDA entry is there, create an entry(Attached screenshot for your reference).
Hope this helps.
Regards,
Ravi

Routing unit of measure conversion

Dear guru ,
I have a different unit of measure for one operation of my routing.
Which is the problem if I maintain relation 1 to 1 in the routing unit of measure conversion ?
Thanks.

Dear ,
One operation of my routing have a different unit of measure (EA for operation , KG for routing).
I don't know the exact conversion factor between operation and routing.
This factor is only known after the confermation of the production order.
Which problem occurs if i maintain relation 1 to 1 (numerator and denominator) in the routing unit of measure conversion.
Thanks.

O4G1 - Unit of measure group does not exist

Dear all,
This is error exists in O4H1 : Unit of measure group does not exist.
I have created the group following by this path: Industry Solution Oil & Gas (Downstream) -> HPM (Hydrocarbon Product Management) -> Oil- and Gas-Specific Units of Measure and Additional Stockkeeping Units -> Define additional stockkeeping units of measure (Transaction O586).
But i don't know how to use this UOM group. Pls help!
Thanks,
Edited by: Le Vinh Quang on Dec 29, 2010 8:05 AM
O4H1 --> O4G1

Hi,
Maintain in the Material Master data for your material.
The UoM Group field is on the Oil-specific data tab in MM02.
BR,
Barna

Unit of Measure PCE is not an ISO Code

Hi MDM Experts,
We experienced problems in transferring the Catalog item to the shopping cart. The following error message appears:
"Incomplete items in catalog. Only complete items were transferred "
I checked SLG1 for the OCI error message and found this log:
"Unit of measure PCE is not an ISO code. Item will not be transferred"
I checked table CUNI in both the ERP and SRM server and I found out that PCE is indeed an ISO code. How can I resolve this error? The system is saying that PCE is not an ISO code but the table shows that it is. Is this a bug or something?
Would appreciate your help. Thanks in advance!
ADP

It turned out that in ERP and SRM, ST is the ISO code used for UOM piece. The ISO code in the Data Manager was changed to synchronize the three systems.

Unit of measure ST is not defined as a commercial unit

Hi Experts,
While doing Punch Out catalogue in the Maintenance Order, i have received the following error "Unit of measure ST is not defined as a commercial unit".
I have checked in the transaction CUNI, and ensure that the above UoM is maintained.
This is a standard error message M3 491.
Any pointers will be appreciated....
by
Prabhu

Hi Prabhu,
GOTO CUNI
Check whether Commercial meas.unit field is ticked or not in application Parameters tab.
If not maintained, maintain here the tick
Regards,
Amol

Error: In language EN, the internal unit of measure DA is not maintained.

hi
i am doing subcontracting operation and when i try to convert the PR into p.o in co02 the system gives this error
In language EN, the internal unit of measure DA is not maintained.
how can i solve this error...

Hi,
There are couple of things..
1. PR to PO Creation is not with T.Code: CO02.
2. It seems you are working on Multi Global environment.
Ask your Basis Team to do the Language imports for UOM.
Regards,
Siva

Component material costing (Unit of Measure conversion) is not working at S

Similar Messages

Maybe you are looking for