COMPONENT MONITORING in the RWB is not working /throwing error

HI
I ve recently installed a new PI 7.0 SP 18 , but my COMPONENT MONITORING in the RWB is not working , as i click on COMPONENT MONITORING it throws an error :
java.lang.NoClassDefFoundError: com/sap/aii/rwb/exceptions/HttpException
, pl help
thanks
mojib

Hi Mark ,
Thanks for your timely help , it has solved my problem ,
thanks once again
rgds
mojib

Similar Messages

MDIS Unmapped Values ADD is not Working Throws errors

Hi Experts,
I have a Qualified table where the Non qualifier is a Lietaral Date field.
Qualified Update -> Update
New links -> Create
Existing Links -> All mapped Fields
MDIS unmapped values -> ADD
All is working well,When the Incoming file has exactly the same NOn qualifier as in Data manager, But when the incoming file has some New non-qualifers then it fails with a value Exception...
1166657856 2011/09/27 16:29:16.326 GMT Importing: 'Samplee_27sep[1].xml.MDM_DATA' Table --> 'CostCentre.CostCentre' Table.
1166657856 2011/09/27 16:29:16.341 GMT Could not create lookups. Source record number: -10, error message : Type mismatch. Invalid field values.
1166657856 2011/09/27 16:29:16.346 GMT Import failed. Could not create lookups. Source record number: -10, error message : Type mismatch. Invalid field values.
Import action: Update (All Mapped Fields)
Source record no: 1
But ideally it should NOT fail as the MDIS Unmapped fields are set to ADD..
I would expect it to Add any new NON qualfiers to QT and add that Link to that Record.
But it is throwing error...
Did anyone face this issue till date???
Kind Regards
Eva
Why is this behaviour..

Hi,
In the Import map as the Non qualifier is the literal date field and in DM i can see they are stored in MM/DD/YYYY format.
The incoming value from the File is also the same format but the Config parameters date format in Import map is different, is this the problem for not adding New dates even though the MDIS unmapped fields are set to ADD..
Also, are Config parameters Specific to Map or Repository Or server!!
i.e if i change a config parameter and save the map.
will the config parameters in all import maps be changed automatically??
Kind Regards
Eva

The battery does not work

Hello
I have a problem with my Toshiba WT310 tablet.
Battery status in toshiba health monitor is good, but tablet not working on battery power.
If I plug the power adapter into the socket tablet works fine, but if unlink AC tablet turns off.
Battery power is 97% in system, so is charged.
Amber battery light flashes.
Someone had a similar problem or know how to solve?

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
If it's a European model, you could check the Toshiba Europe forum.
- Peter

Sorting for the procedure is not working

can you help why the sorting is not working here.I am running the below procedure to sort asc and desc and when I do sort in descending order by a different column it gives me a different rows sorted in desc order. what i
want the proecdure to do it to sort the recordset in asc and desc order without changing the selected rows
SQL> exec trnsportitems.gettrnsportitems(1,10,'itemnumber desc', :n, :c);
PL/SQL procedure successfully completed.
SQL> print c;
ITEMNUMBER              R IDESCR                                   IDESCRL                                                      IUNI IS I ITEM
2011.601/00002          1 TUNNEL CONSTRUCTION LAYOUT STAKING       TUNNEL CONSTRUCTION LAYOUT STAKING                           LS   0
2011.601/00003          2 CONSTRUCTION SURVEYING                   CONSTRUCTION SURVEYING                                       LS   05 N 2011601/00003
2011.601/00010          3 VIBRATION MONITORING                     VIBRATION MONITORING                                         LS   05 N 2011601/00010
2011.601/00020          4 REVISED BRIDGE PLANS                     REVISED BRIDGE PLANS                                         LS   05 N 2011601/00020
2011.601/00040          5 DESIGN                                   DESIGN                                                       LS   05 N 2011601/00040
2011.601/00050          6 DESIGN AND CONSTRUCT                     DESIGN AND CONSTRUCT                                         LS   05 N 2011601/00050
2011.601/08010          7 SUPPLEMENTAL DESCRIPTION                 SUPPLEMENTAL DESCRIPTION                                     LS   05 N 2011601/08010
2011.601/08011          8 SUPPLEMENTAL DESCRIPTION                 SUPPLEMENTAL DESCRIPTION                                     LS   05 N 2011601/08011
2011.601/08012          9 SUPPLEMENTAL DESCRIPTION                 SUPPLEMENTAL DESCRIPTION                                     LS   05 N 2011601/08012
2011.601/08013         10 SUPPLEMENTAL DESCRIPTION                 SUPPLEMENTAL DESCRIPTION                                     LS   05 N 2011601
10 rows selected.
SQL>
SQL> exec trnsportitems.gettrnsportitems(1,10,'idescr DESC', :n, :c);
PL/SQL procedure successfully completed.
SQL> print c;
ITEMNUMBER              R IDESCR                                   IDESCRL                                                      IUNI IS I ITEM
2563.613/00040          1 YELLOW TUBE DELINEATORS                  YELLOW TUBE DELINEATORS                                      UDAY 05 N 2563613/00040
2563.602/00100          2 YELLOW TUBE DELINEATOR                   YELLOW TUBE DELINEATOR                                       EACH 05 N 2563602/00100
2565.602/00940          3 YELLOW LED INDICATION                    YELLOW LED INDICATION                                        EACH 05 N 2565602/00940
2502.602/00040          4 YARD DRAIN                               YARD DRAIN                                                   EACH 05 N 2502602/00040
2411.601/00030          5 WYE STRUCTURE                            WYE STRUCTURE                                                LS   05 N 2411601/00030
2557.603/00041          6 WOVEN WIRE FENCE                         WOVEN WIRE FENCE                                             L F 05 N 2557603/00041
2557.603/00043          7 WOVEN WIRE                               WOVEN WIRE                                                   L F 05 N 2557603/00043
2563.613/00615          8 WORK ZONE SPEED LIMIT SIGN               WORK ZONE SPEED LIMIT SIGN                                   UDAY 05 N 2563613/00
2563.613/00610          9 WORK ZONE SPEED LIMIT                    WORK ZONE SPEED LIMIT                                        UDAY 05 N 2563613/00610
2557.603/00035         10 WOODEN FENCE                             WOODEN FENCE                                                 L F 05 N 2557603/00035
10 rows selected.

Hi,
user13258760 wrote:
can you help why the sorting is not working here.I am running the below procedure to sort asc and desc and when I do sort in descending order by a different column it gives me a different rows sorted in desc order. what i
want the proecdure to do it to sort the recordset in asc and desc order without changing the selected rowsAs it is written now, the argument insortexp has nothing to do with the order of the rows. It is used only in computing column r, and column r is used only in the WHERE clause.
Are you really saying you don't want a WHERE clause at all in the main query: that you always want the cursor to contain all rows from itemlist that meet the 3 hard-coded conditions:
...                     WHERE item '2999509/00001'     -- Did you mean != here?
                          AND iobselet = 'N'
                          AND ispecyr = '05'?
If so, change the main query WHERE clause:
WHERE r BETWEEN instartrowindex AND inendrowindexinto an ORDER BY clause:
ORDER BY rBy the way, you might want to make insortexp case-insensitive.
In your example, you're calling the procedure with all small letters in insortexp:
user13258760 wrote:
SQL> exec trnsportitems.gettrnsportitems(1,10,'itemnumber desc', :n, :c);but the output is coming in ASC ending order:
...                           ORDER BY
                                 DECODE (insortexp, 'itemnumber ASC', item) ASC,
                                 DECODE (insortexp, 'itemnumber DESC', item) DESC,     -- capital 'DESC' won't match small 'desc'
                                 DECODE (insortexp, 'idescr ASC', idescr) ASC,
                                 DECODE (insortexp, 'idescr DESC', idescr) DESC,
                                 DECODE (insortexp, 'idescrl ASC', idescrl) ASC,
                                 DECODE (insortexp, 'idescrl DESC', idescrl) DESC,
                                 DECODE (insortexp, 'iunits ASC', iunits) ASC,
                                 DECODE (insortexp, 'iunits DESC', iunits) DESC,
                                 DECODE (insortexp, 'ispecyr ASC', ispecyr) ASC,
                                 DECODE (insortexp, 'ispecyr DESC', ispecyr) DESc,
                               SUBSTR (item, 1, 4) || '.' || SUBSTR (item, 5)          -- This is the only non-NULL ORDER BY expression     Why not declare a local variable:
sortexp      VARCHAR2 (20) := LOWER (insortexp);and use that variable instead of the raw argument in the query:
...                              DECODE (sortexp, 'itemnumber asc', item) ASC,
                                 DECODE (sortexp, 'itemnumber desc', item) DESC, ...Also, this site doesn't like to display the <> operator, even inside \ tags. When posting here, always use the other inequality operator, !=
Edited by: Frank Kulash on Jun 15, 2010 3:25 PM

Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state in SCOM 2012

Hello Team,
We are monitoring 1000 servers in our environment and out of 1000 servers, we have approximately 100 servers showing as critical state on the server state view.
We can get the critical servers list from SCOM console, but we are not able to get the information about the component responsible for the server to be critical. Using Health explorer to find the root cause for 100 servers is really impossible and time consuming.
Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state?
Advance thanks for your help.
Regards,
Dinesh
Thanks & Regards, Dinesh

Hi,
As far as I know alerts with severity as criticla may cause windows computer in a critical state, we can try below code to find all critical alerts：
get-alert -criteria 'ResolutionState=0 AND Severity=2' | select Name,ResolutionState,TimeRaised | export-csv c:\Alerts.txt
Criteria Syntax http://msdn.microsoft.com/en-us/library/bb437603.aspx
Values to use.
Resolution State
Severity Values for Alerts
0 = New
0 = INFORMATIONAL
255 = Closed
1 = WARNING
2 = CRITICAL
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

The wi-fi on my ipod touch is connected but the internett is not working! Help

Soo annoying, it's connected but the internett is not working. I don't know what to type in or what to do, so I need help.

Are you 100% positive you are connected? Head to Settings - Wi-Fi and tap the > next to the network you are connected to? What is listed for an IP address? If it's in the 169.x.x.x range, it means your iPod did not properly receive a valid IP address via DHCP from your modem/router. So the 169.x.x.x address is a self-assigned one.
This can usually be resolved by a reboot of your router. You can do this by unplugging it for about 30 seconds. After it powers back up, try reconnecting it. It wouldn't hurt to try a reset of your iPod as well. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting suggestions.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

WRT1900 AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900 AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900 AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900 AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

FernandoRocker wrote:
Well... instead of looking into this with Engineering, I would prefer you to talk about this with the Sales department and exchange my WRT1900AC for an EA8500 (I will pay the difference if needed). Seriously. The device is useless. Not just a paperweigt... an expensive paperweight.Actually I looking into the swap for you because I think that would be best in your case. Keep this in perspective. There is laterally millions of WRT1900AC V1 out there with very few issues with latest firmwares and of course the odd exception. In your case it could be a defective WRT1900AC.

WRT1900AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

HT1212 I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?

I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?

You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.

My mac fall and now the trackpad is not working?

So today my macbook fall and the bottom left part of the trackpad is not working . I can still move the cursor, but if I click on the bottom left corner of the trackpad, I cannot tap the other trackpad part, it will not respond. To make it respond again, I need to click on the bottom right corner of the trackpad, so I can tap the other trackpad parts. In short, I must TAP to click, I can't click on the bottom left corner. The secondary click (bottom right corner or two fingers tap) works fine.
There's no Apple Store in my city (or even country, I live in Indonesia), I just have an Apple Reseller on my city. What do I need to do?

I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees).

TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Please is an emergenci!!! I put my iPhone 5 to charge and the cable is not working I tried in other pluggers in the house but nothing I don't know what's wrong and I don't have any more battery

Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?

@whimsei,
Hello and thank you for posting back. What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
To fix this it would have to be opened up and the connections checked. If there is an issue with the cable then it would have to be replaced. This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
Here is the link to the maintenance and service guide. If you feel comfortable doing the work it will help you.
HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
Maintenance and Service Guide
If you want to send it in for repair here is how.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

COMPONENT MONITORING in the RWB is not working /throwing error

Similar Messages

Maybe you are looking for