Component Palette - Is there a way to..?

The length of the component palette on my JDeveloper 3.1 got reduced for reasons that are not clear to me. I can scroll through the palette to view the components but this is not convenient. When I reinstalled JDeveloper 3.1, the length of the palette does not change when I open the project that I am working on.
Is there a way to rectify the problem?
null

mn,
Drag the component palette off of the toolbar, resize it to make it wider, then re-dock it (drag it) back onto the toolbar.
Hope this helps,
Rob
null

Similar Messages

After Upgrading to 10.1, all clips have lost the audio component. Is there any way to get this back?

I have recently updated Final Cut Pro to 10.1, after this upgrade (as well as an upgrade to Maverick) non of the video clips in ANY event or project have any sound component. I have a backup of the project and event files before the upgrade, but I have no idea how I can get the clips back and if I do how I can update the numerous projects I have that no longer have sound. Has anyone else had this problem, if so were you able to fix this? Or am I just doing something wrong?
The clips have no wave form when I look at them so it's almost like they have been stripped of sound. If I goto the event browser and say reveal in finder, I am taken to Original Media, but these are tiny files that can't be played in VLC - they almost look like shortcuts or dynamic links or something...
Can anyone help me get the adio back on these or should I revert back to a previous time machine backup and not update to 10.1?
Thanks
Richard

Not sure what made the files lose the audio, but the solution for my issue was:
In Final Cut, right click on a clip in the event viewer, Reveal in Finder
Close Final Cut Pro
Export orginal clips from Aperture.
Copy exports into folder that the original meda was in, replace all
Open up Final Cut Pro
Load project again, it will start analysing the audio...
Job done

Af:panelPage not found in Component Palette

Hi All,
I am using JDeveloper 11.1.1.5.0. I am following a hands-on tutorial in book "Oracle JDeveloper for Forms and PLSQL developers" which is using Oracle JDeveloper 10g. It is using af:panelPage facet which is not available in JDeveloper 11g.
Can someone guide me how to include it in component palette or there is some alternative available with different name?
Any help will be highly appreciated.
Thanks in advance
Bilal

component palette.. show ADF UI related components when you have ADF Faces. ADF Page Flow shuttled to the right in the project properties.. -> Technology Scope.. ADF ViewController project.. from New Gallery comes with these libraries handy...
i am not sure about af:panelPage.. in 10g but if you want to use panel then you can have a look at
af:panelHeader
af:panelAccordion
etc in jdev 11g for ADF UI components...

Is there any way to call methods of one view from another

Hi experts,
I am new to webdynpro.I am having some requirement in which I need to call methods of one view from some other view of same component .So is there any way to do this.

Dear Pradeep,
This will solve your problem......( plz 1st read everything ..)
There are 2 views :
i) Mandatory Attributes ' view(V1)
ii) Button' s View..(V2)
1. Create a method in Component Controller.( M1).
2. Goto V2 . In the Action Handler method of Button , call method M1 of component controller.
3. Write your Code in M1 instead of V2 method.
4. Create an EVENT ( E1 ) in component controller.
5. Fire this event from M1 before executing Action Code.
6. Now Add the event handler method of E1 in V1 ( i.e. Mandatory attributes view. ) ..........clear????? .. set "METHOD TYPE" = Event Handler. instead of Method.
7. In this event handler method in V1 , write the "check_mandatory_attribute_view" method.
8. use necessary flags..
Regards ,
Aditya.

Satellite A100-192: Is there any way to add DVI port

hello
is there any way to add dvi port to this laptop ?
display card is ati mobility radeon x1600 so the chipset
supports dvi and analog component output
is there any way to add dvi port
or component signal output over d-sub port ?
tia

As Dennis already said, you cannot upgrade the motherboard t get the DVI port but you could buy an 3rd party PCMCIA card which supports such port!!!
Google a little bit and you should find some nice offers.
But such cards are not cheap! So finally its your choice ;)
Greetings

Is there a way to shift select multiple objects in layer palette, not just highlight multiple object

Hi,
Is there a way to shift select multiple objects in layer palette, not just highlight multiple objects?
I would want to do this when I have a bunch of objects hidden under some other objects on the artboard. This feature is available in PSD, so I assume Illustrator should have it.
Thanks!

Thanks for the reply, Harron.
I'm using CS4 & below.
Highlighting object - click on object in layers palette & it turns blue
Select object - click on object in layers palette to the right of the circle, which creates a square, and selects the object on the artboard
How do I shift-select multiple objects in the layers palette...select 50 objects with a click, then a shift-click? Shift-select works for highlighting, but not selecting. On most programs shift-select is used to grab a bunch of stuff...:0)
In the past I have inadvertently selected multiple objects in the layers palette, by somehow alt?-dragging over the layers...or something...I can't re-create it.

Is there a way to permanently save color libraries in Illustrator CC 2014 so that every time you launch the software, the colors appear in Swatch palette?

Is there a way to permanently save color libraries in Illustrator CC 2014 so that every time you launch the software, the colors appear in Swatch palette?

Modify the New Document Profile you use the most to reflect what you want it to contain or just make a new document with all the stuff and save it with a distinct name to the New Document Profiles folder in your user profile.

Is there a way of recording component video output to a MacBook Pro

I have a Sony DXC990P video camera head i.e. it has no recorder. It has several output of which component video is regarded as the highest quality. Is there a way recording this output with a MacBook Pro?
T5G5

The matrox MXO2 is likely what you are referring to. It would be an extremely useful i/o device for you if the price is acceptable. It will have good resale value for a few years too if you ever wanted to get rid of it. With your camera's chip set and resolution of 850 lines you can capture via component to 4:2:2 color space by editing in a codec like DVCPRO 50 which is very efficient and looks great too. It is a big step above anything dv related which is 4:1:1 color space. If you ever drop your video signal down to dv quality you will take a big hit picture quality wise. Another device is the original AJA IO which connects via firewire and gives you component i/o as well as s-video, composite and digital component as well. The AJA IO's are selling on ebay for $600.00 - $750.00. They were around $2500.00 originally. You could also use an AJA LA which is basically the analog side of the IO and they are a little cheaper. Blackmagic multibridge is another product that is similar. These are all pro level equipment. You will need FCP.
http://www.aja.com/html/productsIoIo.html
http://www.matrox.com/video/en/products/mxo2/output/

Is there any way to get this palette into photoshop CS6?

I'm curious as to why Photoshop CS6 can't have a simple effective palette choice like this one from Fireworks?
I'm an artist and this palette makes sense to me. The standard issue pallette in Photoshop is a mess compared to this.
Is there any way to get this palette into photoshop CS6?
Thanks!

If your talking about the Color Cubes from fireworks as shown in your screenshot, then yes.
Save the swatches out of fireworks as an Adobe Swatch Exchange File (ASE) and then you can load them into photoshop
in it's swatches panel like below.

Is there any way to disable caching for a particular component?

I have a component which should always produce the output by executing a code and not from the dispatcher cache.
Is there any way to clear the dispatcher cache for the component or is it possible to disable the component caching.

Praveen-
The dispatcher caches the entire HTTP response body, so doing what you are describing actually requires two steps:
1) Loading the non-cacheable component through Ajax (or some other edge side assembly technology like ESI)
2) Including the Dispatcher: no-cache header in the response when that component is requested.
#1 is pretty easy to do with jQuery
#2 is covered here: http://dev.day.com/content/kb/home/Dispatcher/faq-s/DispatcherNoCache.html
You will probably want to use the WCMMode to only do the dynamic loading on the publish server.
HTH,
Justin

Is there any way to enlarge menus, palettes, toolbar?

The icons and font headers for all the menus and palettes are too small. Isn't there a way to change so it's more legible? Using Indesign CS2. Help.. this is such a drag!

10vtjudemd wrote:
The icons and font headers for all the menus and palettes are too small. Isn't there a way to change so it's more legible? Using Indesign CS2. Help.. this is such a drag!
There are cheap and free third-party utilities for both Mac and Windows that can enlarge parts of the screen. Some newer versions of OS X and Windows (7, I think) have features built in. On Mac, it's in System Preferences > Universal Access > Mouse & Trackpad > Open Keyboard Preferences > Zoom (whew!)
Try a Google search for screen enlargement, screen loupe, screen eyeglasses, screen zoom - Windows or Mac - free, etc.
Ooops, I forgot to include search terms like assistive devices, screen magnifiers, increasing user interface size.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Message was edited by: peter at knowhowpro

Component Palette cannot show in Jdeveloper IDE

I startup Jdeveloper 11g studio edition version 11.1.2.3.0 with all features option selected, but cannot see the Component Palette panel(only can see a grey blank area at the up-right corner in Jdev IDE).
and when I open the SummitADF application example, click the index.jspx file, in the opened "design" view for index.jspx, only text-style is displayed.
What's the matter? need helps!
By the way, I run the jdev in Windows 7.
Thanks.
BAO

It works by "reset window factory settings"-the Component Palette appears now.
and it also works by selecting memu "View-Component Palette(ctrl+shift+p)".
but there is still another half problem:
Even I have startuped the jdev by SELECT ROLE :STUDIO DEVOLOPER(ALL FEATURES) ,
but when i open/new a *.jspx file, only a text-style component structure is displayed instead of WYSIWYG style display in the opened "design" view.
--Anyway it's great for i can get help almost on time(in demand) from this forum! many thanks!

ADF Faces not found at Component Palette..

I am a Tertiary Student currently doing a project using Jdeveloper 11G version 11.1.1.3.0 . I am currently doing a project on Login.jspx. I am unable to select the ADF Faces page from the Component Palette and unable to Locate the Panel Header component in the Layout layer of the Component Palette. May I know is there any other way to be able to locate the ADF Faces Page or the panel header?
Thanks.

Make sure you have the 'ADF Faces' and ADF Page Flow' technologies selected to your project.
Open the ViewController project properties and select the last node in the tree ('Technology Scope'). The two mentioned scopes should be on the selected side to see the stuff you are looking for in the component palette.
Timo

Add custom JPanel to component palette

Hi all,
i created a new JPanel,that extends JPanel class, called MyPanel. Is there a way for me to add this to the component palette?
I tried adding it to code snippets but that didn't work for me.
Christoph

Christoph,
1. right mouse click onto the component panel
2. Choose "Palette Properties"
3. Click "Add" to create a new page
4. Give it a name of your choice e.g. "My ToolBox"
5. Type should be Java
6. Click add on the Components area for "My ToolBox" to search for the component to display
Frank

Missing diagram components from component palette in Jdev11

I've been using JDeveloper 11 for a couple of months and today went to create a sequence diagram and found that I had no sequence components listed in the Component Palette. The only drop-down selection is "My Components" which is empty.
I tried this in Tech Preview 4 which I still have and the selection drop-down contains Sequence components such as Object Lifeline, Message, etc.
I'm using version 11.1.1.0.1 and it's the full Studio version/role that I'm running.
Any hints on what might be wrong with my setup?
Thanks,
Gary

I tested several approaches:
- closed and opened Jdeveloper several times
- rebooted the machine and then opened Jdeveloper
nothing worked
I managed to resolve the problem in the "heavy way".
I first uninstalled/reinstalled JDev 11.1.1.0.2 but nothing changed. It didn't ask me to import settings from previous version.
I tried again but this time I:
- uninstalled Jdeveloper
- removed the directory <JDEV_INSTALL_DIR>/system/system11.1.1.0.31.52.05 (moved it elsewhere)
- reinstalled Jdeveloper importing settings of my previous JDeveloper 11.1.1.0.1 which was into the directory <JDEV_INSTALL_DIR>/system/system11.1.1.0.31.51.88
I reopened my projects and everything is back to normal.. at least for DB diagram ans Sequence diagram (I haven't tested everything).
Since I haven't changed my settings since the upgrade, I haven't lose anything.
I even closed Jdeveloper and reopened it to check if it was still working fine and it was.
So this is one solution for people having the same problem.
I don't know if there is a "lighter" way to resolve the problem.
Djazia

Component Palette - Is there a way to..?

Similar Messages

Maybe you are looking for