Component ST-A/PI: release 01N_700SOL is incorrect, expected 01[M-Z]_CRM.*

Hello!
I faced with problem after installed Support Package SAPKITL436 (with SP26) on my Solution Manager 7.01
Support Package SAPKITL436 need to upgrade ST-A/PI,01M_CRM570 to ST-A/PI,01N_700SOL.
After upgrading ST-A/PI and installed SP26 I try to Refresh BASIC CONFIGURATION.
In step INSTALLATION CHECK on the Diagnostics Prerequisites I get status "Activity Error" with explanation
Component ST-A/PI: release 01N_700SOL is incorrect, expected 01[M-Z]_CRM.*: see note 1274287
I can not view note 1274287
May be somebody know what I need do? I can ignore this messege?
Or I can do some steps to resolved this problem?
Best regards
Andrey Ivanov

Hello,
The Note is currently in status "For Checking" which means a change has been made and the review process is underway.
It should be released shortly. However you can check the following:
Requirements with component ST400 for SP26
    o Solman 7.0 SP26 ABAP-Stack:
       - Support Package Stack 07 for SAP WEB AS 7.01 AS ABAP
                                                                 Page 7
       - Support Package 07 for PI_BASIS 701 (SAPK-70107INPIBASIS)
       - Support Package 07 for SAP_ABA 701 (SAPKA70107)
       - Support Package 07 for SAP_BASIS 701 (SAPKB70107)
       - Support Package 07 for SAP_BW 701 (SAPKW70107)
       - Support Package 16 for CPRXRPM 400 (SAPK-40016INCPRXRPM)
       - Support Package 19 for SAP_AP (SAPKNA7019)
       - Support Package 17 for BBPCRM 500 (SAPKU50017)
       - Support Package 05 for CRMUIF 5.0 (SAPK-50005INCRMUIF)
       - Support Package 09 for BI_CONT 7.04 (SAPK-70409INBICONT)
       - Support Package 26 for ST 400 (SAPKITL436)
       - Support Package 04 for ST-PI 2008_1_700 (SAPKITLRD4)
       - Support Package 00 for ST-A/PI 01N_700SOL (SAPK-01NS2INSSA)
       - Minimum Support Package 24 for ST-ICO 150_700
(SAPK-1507OINSTPL)
       - Minimum Support Package 03 for ST-SER 701_2010_1 (SAPKITLOS3)
    o SolMan 7.0 SP26 JAVA-Stack:
       - Support Package Stack 07 for SAP WEB AS 7.01 AS JAVA
       - Support Package 09 for SOLMANDIAG 7.01
You should verify your component levels agains the above listed ones.
Also check AGS_UPDATE and ensure you have checked for, downloaded and applied any and all updates.
Hope this helps.
Regards,
Paul

Similar Messages

Component BI_CONT: SP level 0001 is incorrect, expected 6

Hello!
I faced with problem after installed the Solution Manager 7.01 (with SP26)
In step INSTALLATION CHECK on the Diagnostics Prerequisites I get status "Activity Error" with explanation
Component BI_CONT: SP level 0001 is incorrect, expected 6
May be somebody know what I need do?
Or I can do some steps to resolved this problem?
Best regards
Dmitry Zakharenkov

Hi
Please verify the solution manager met all the prerequest specified in the note for ur SP level
[Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP26|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1274287]
if no, please make them equal to the note
and if yes, you can check the fix in the note avoid the activity error
[ Note 1297598 - Fix in prerequisite|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1297598]
Jansi

EHP5 Stack File is invalid: component 'EA-HR' (stack release 600 source .

Hi all . . .
Attempting to install EHP5 on ERP ABAP stack. Currently on EHP4 SPS5.
During the configuration roadmap step, the Stack configuration overview told me that "for the following components, a Component Upgrade/Installation and/or Support Packages will be included according to the selected EhP stack configuration . . . " and it proceeded to list the various compoents and their intended releases. During that, I did take note that it wanted to move EA-HR to 600 SPLevel 0059 . . . I was surprised by this, yet I pressed on.
Now, during the Information Gathering phase (PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION) I received the error:
Last error code set: Stack file is invalid: component 'EA-HR' (stack release 600 < source release 604)
I understand that it is trying to tell me that the component is trying to install a release lower than what is already installed. The problem is, I do not know how to go about fixing it.
Any suggestions?
Thanks,
Bryan Montgomery

Hello Bryan,
I believe the best and fastest way to have EA-HR upgraded to 605 is to unselect this usage type in MOPZ, regenerate the XML without it, upgrade the rest of the system to EhP5 level and, afterwards, upgrade only EA-HR to 605 level using SAINT.
Please make sure to check the EHP5 manuals:
http://service.sap.com/swdc
-> Ramp-Up Releases and Beta Software
    -> Installation and Upgrade
      -> EHP5 FOR SAP ERP 6.0
       -> Technical Documentation
and these notes:
#1323537 - Release Info SAP Enhancement Package 5 for SAP ERP 6.0
#1304648 - SAP ERP Enhan.Pk.5 SP Stack 01(10/2009) - Release Information Note
Best regards,
Tomas Black

UI component glow remains after release.

Hi, I am having a problem with the UI components in my flash
project. Once they have been activated the highlight glow remains
on until another UI is activated by a rollover or a release. this
only happens in IE, not when the project is being viewed with the
Flash 'test movie' option. This is particularly problematic with
combo boxes where the outline of the drop down box remains visible.
Any ideas?

I don't have a solution for you, but I think you're probably
right about the datagrid in the accordion being the culprit. I
recently included a datagrid in a movie and have had no problems
with it.

SES release strategy being incorrectly triggered

Dear All,
We have maintained release strategy for Service Entry Sheet. In the SES release strategy class only the following characteristic is maintain
a. Name of the person who creates the Service entry sheet
In the release strategy only 'a', 'b' and 'c' users are maintained in the above characteristic. But in the system even if a user f creates the service entry sheet the system applied the release strategy on it too and asks for release code. The system should only ask for release code if a,b or c user creates SES.
Thank you!

Hi There
Just a guess,,
In CT04- for Name of Person who Created the SES (ERNAM)- in the values tab-
Check the indicator-Additional Values is eanbled or not,, if enable remove it and try
Thanks
Senthil

New Release fo air port expected soon?

Given the various problems afflicting the cooperation between Time Machine a Air Port, someone knows whether Apple is considering a new release of either of those supports or to get rid of either...?

fbartolom, Welcome to the discussion area!
We are all users just like you with no direct connection to Apple nor any insight as to their future plans.
Also, as you know from reading the "Help & Terms of Use" for this area, speculation on future Apple products and services is forbidden.

SOLMAN_SETUP - DIAGNOSTICS Prerequisites fails for BI_CONT

Hi,
We have installed a new Solman 7.0 EHP1 (with new SR1 DVD/media) and then updated it to SP27. SP27 patching has been done with the SPS stack - and this has automatically installed/updated new component ST-BCO and updated BI_CONT to 706 SP1.
During Post Installation configuration, under SOLMAN_SETUP, we have observed that "DIAGNOSTICS Prerequisites" step is failing with the message
Component BI_CONT: release 706 is incorrect, expected 704: see note 1274287
Component BI_CONT: SP level 0001 is incorrect, expected 6
As per SAP note 1274287, our system meets minimum system requirements for BI_CONT.
But not for ST-BCO as minimum requirements is - Support Package 01 for ST-BCO 400 (SAPK-40001INSTBCO ?)
My questions are:
Any idea why the Diagnostics Prerequisites are still failing.
I can't find this patch anywhere in sap service marketplaceso any idea from where to download this.
Appreciate your views on this asap, please.
BR
Davinder

Appreciate your quick response. Following the recommeded Note -- solves my first problem - wow.. Thanks again for this.
Will really appreciate if you can clarify on my second query also, please-
"Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27" - our system meets all the prerequisites, except for the component ST-BCO - our system has ST-BCO 400 SP0.
But requirement is to have Support Packages 1 (SAPK-40001INSTBCO).... which i am not able to find out from SAP Service marketplace,
Any idea how this can be downloaded, please
Requirements with component ST400 for SP27
    o Solman 7.0 SP27 ABAP-Stack:
       - Support Package Stack 08 for SAP WEB AS 7.01 AS ABAP
       - Support Package 08 for PI_BASIS 701 (SAPK-70108INPIBASIS)
       - Support Package 08 for SAP_ABA 701 (SAPKA70108)
       - Support Package 08 for SAP_BASIS 701 (SAPKB70108)
       - Support Package 08 for SAP_BW 701 (SAPKW70108)
       - Support Package 19 for CPRXRPM 400 (SAPK-40019INCPRXRPM)
       - Support Package 22 for SAP_AP 700(SAPKNA702)
       - Support Package 18 for BBPCRM 500 (SAPKU50018)
       - Support Package 07 for CRMUIF 500 (SAPK-50007INCRMUIF)
       - Support Package 01 for BI_CONT 706 (SAPK-70601INBICONT ?)
       - Support Package 01 for ST-BCO 400 (SAPK-40001INSTBCO ?)
       - Support Package 27 for ST 400 (SAPKITL437)
       - Support Package 04 for ST-PI 2008_1_700 (SAPKITLRD4)
       - Support Package 00 for ST-A/PI 01N_700SOL (SAPK-01NS2INSSA)
       - Minimum Support Package 24 for ST-ICO 150_700 (SAPK-1507OINSTPL)
       - Minimum Support Package 07 for ST-SER 701_2010_1 (SAPKITLOS7)
BR
Davinder

Error checkin prerequisites diagnostics in SOLMAN_SETUP

Hi All!
I trying execute Basic Configuration in SOLMAN_SETUP. In section installation check on step Prerequisites Diagnostics receive messages:
Component CPRXRPM: SP level 0007 is incorrect, expected 14
Component CPRXRPM: release 450_700 is incorrect, expected 400
Could you please help me to resolve it?
Thanks for your advance,
alexander Ganishev

Hi Shyam!
If am not wrong CPRXRPM450 version was requested by " Diagnostic Prerequisites" check?
in system installed version 450_700
If yes, you can ignore the message from Diagnostic Prerequisites check and set your system to CPRXRPM 400.
Could you try to implement the required version ?
How can I set system to CPRXRPM 400? Version CPRXRPM 450 cannot uninstalled.
and also deploy LMService 701 SP02 Patch 4.
in system applied LM-SERVICE 7.01 SP4
Thanks for your advance,
Alexander

New Release: Java ES 5 Update 1 - **Correction**

In my entry on Sep 5, 2007 7:34 AM with the topic of "New Release: Java ES 5 Update 1", I incorrectly stated that Sun Application Server 9.1 was certified with Java ES 5 Update 1. It is not. The fully certified and supported web containers are listed in the Java ES 5 Update 1 Release Notes. For now, it is not supported by Java ES 5 Update 1 component products, but future releases of Sun middleware products will, so hang tight. I do apologize for any inconvenience. The official documentation at docs.sun.com should always be considered the source for what is supported and what is not.
Here is a corrected entry...
In case you haven't noticed there is a new version of the Java Enterprise System that was posted to the Sun Download site on Friday September 1, 2007. The new release is Java ES 5 Update 1. Here is the main Java ES download page.
Here are the versions of the individual products that are in Java ES 5 Update 1:
* Directory Server 6.2 EE
* Directory Proxy Server 6.2
* Application Server 8.2 Patch 2
* Service Registry 3.1 Update 1
* Access Manager 7.1
* Portal Server 7.1 Update 2
* Message Queue 3.7 Update 2
* Web Server 7.0 Update 1
* Web Proxy Server 4.0.5
This release is mainly a maintenance release, with lots of bug fixes. But there are a few new and interesting features included also.
One interesting feature is the inclusion of Service Tags. Service Tags are digital identifiers that can be embedded in software or firmware and that holds a small amount of product information. The Sun Connection Registration Manager discovers service tags and registers the products and allows you to view and manage your registered products online. You can check out Sun Connection Inventory Channel here. Not all of the Sun Java System components are Service Tag-enabled just yet, but a lot of them are. Here is the list of the components that are Service Tag-enabled:
* Directory Server 6.2 EE
* Application Server 8.2 Patch 2
* Access Manager 7.1
* Portal Server 7.1 Update 2
* Web Server 7.0 Update 1
* Monitoring/JMX framework

To install Sun Java Stutio 5 update 1 under SuSE
LInux (tested with SuSE 9.0 Professional, but should
work with other versions) simply create a text file
in /etc named suse-release with the follwoing
content: Sun Java Desktop System 2003
Now you will be able to install Sun One Stutio 5
update 1 under SuSE.Did not work - still got (-is:log log.txt):
Executing launch script command: "/usr/lib/java/bin/java" -cp "/tmp/isjtPgeKd/Verify.jar" "Verify" java.vendor java.version in working directory /root/install/.
Output from the launch script execution
StdOut:
1739021872
Sun Microsystems Inc.
1.4.2_04
ErrOut:
Found matching JVM at /usr/lib/java/
Matching JVM home is /usr/lib/java/
Matching JVM file is /tmp/isjGbTC86
Executing launch script command: "/usr/lib/java//bin/java" -cp "/tmp/isjPpa0A0/s1s5u1se-linux-en.jar" -Dtemp.dir="/tmp" -Dis.jvm.home="/usr/lib/java/" -Dis.jvm.temp="0" -Dis.media.home="/tmp/isjPpa0A0/s1s5u1se-linux-en.jar" -Dis.launcher.file="/root/install/./s1s5u1se-linux-en.bin" -Dis.jvm.file="/tmp/isjGbTC86" -Dis.external.home="/root/install/." run in working directory /root/install/.
Output from the launch script execution
StdOut:
ErrOut:
The wizard cannot continue because of the following error: could not load wizard specified in /wizard.inf (104)
Any help would be greatly appreciated, thnx

Logical Component SAP ERP lost

Hello,
after patching the Solution Manager EHP1 to SPS23, logical component SAP ERP is lost.
in Transaktion smsy Landscape Component - Systems -> the Product SAP ERP is also lost.
strange i can´t see any system that was registred under this component, but i can release patches for all my ERP System by using Transaktion Solution Manager.
regards
Steven

Hi,
Could you please check in transaction SMSYUtilitiesSystem Settings, the product SAP ERP is active? If not please check the active check box.
Rajeev

Stack file is invalid: 'SEM-BW' (stack release 600 source release 602)

Hi experts,
I encountered the following error while patching my BCS SEM system using EHPi.
Servere error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Stack file is invalid: component 'SEM-BW' (stack release 600 < source release 602)
The BCS SEM system is currently installed with SEM-BW 602. But the xml stack file generated by solution manager contains SEM-BW 600. From SMSY, under the Software Components tab, the release for software component SEM-BW is 602.
Where does solution manager obtain the data when calculating the xml stack? How can I generate a xml stack with SEM-BW release 602?
Thanks,
Tzyy Ming

Hi.
When installing this system you have used an installation guide. If i were you i would try to configure the system described in the guide. SAP note 852447 talks about an IInstallation SEM-BW 600 on SAP NW 2004s AS ABAP;
So why not try to configure this system as netweaver as abap in smsy and add the add-ons as relevant. But i am not completely sure - i am at home and can not look to our SolMan system.
I do not think that the configured system should be the problem. You said, the smsy contains the correct data. Did you refresh the product data in your solution manager. That could be the reason why the queue ist not calculated correct ly.
regards,
Martin

Network Component Deletion

Hi All,
I want the table from which i get the material component deleted from activity (Released) ie it shows a deletion flag in RESB table but i also want the time and date on which it is deleted.
Thanks,

In CJ20N , click on the component assigned to the network activity , and clik on the blue button "i" either on general Data tab or Proc Param Tab .
In the next screen ,from the Menu
Extras --> Change Documents --> for All
you get the time stamp .
For the component take the reservation number and pass it to RESB Table .
If RESB-LOEKZ = X ,
Pass RESB-OBJNR to JEST-OBJNR for the Status I0013 .
probably there should be a standard function module or anyother means to identify when the DLT status is active in JEST . Need to explore .
regards
Kish

Planned cost for processing the component

Hi All,
How to see the planned cost for processing any component or finished product in SAP.
I don't want actual cost for processing the component.
Regards,
Shailendra

After releasing production order all primary and secondary costs get attached to the order.
You can see planned cost in Tcode:CO02>>>>Goto>>>>>>>Costs>>>Analysis>>>under cost trend layput.
Yogesh Thorat

How to release panelbinding correctly?

Hi guys, i have a master-detail from linked to the main form through an item menu.
When i close the master-detail form i perform the following operations:
panelBinding.release(DCDataControl.REL_VIEW_REFS);
panelBinding.getBindingContext().remove(panelBinding.getName());
this.dispose();
Is it correct?
I'm asking this because if I open the master-detail form more then once i have the following error:
oracle.jbo.JboException) 35001
thank you,
angelo

When you close a multi-panel form be sure to release all bound panels.
I do it this way:
In all my forms I have:
1) a method to create the bindings
private DCBindingContainer createBindingContainer(String packageName, String panelModelName)
2) a collection of all bound panels, to make it easier all my panels extends an Abtract class with at least following methods:
public void setBindingContainer(DCBindingContainer ctr) throws Exception
public void panelReleaseViews()
3) when closing my form I loop through my collection, cast to my Abstract class and call the release method.
Each sub component must implement the release panel method to release ALL its panels (there could more > 1)
Details:
in calling form:
private DCBindingContainer createBindingContainer(String packageName, String panelModelName)
StringBuffer sb = new StringBuffer(packageName);
sb.append(".");
sb.append(panelModelName);
DCBindingContainerDef bcdef = DCBindingContainerDef.findDefObject(sb.toString()); //NOTE THE NAME.
if (bcdef == null)
throw new JboException("System error, "+getClass().getName()+".createBindingContainer, DCBindingContainerDef: "+sb.toString()+" not found");
DCBindingContainer bc = bcdef.createBindingContainer(panelBinding.getBindingContext());
bc.setName(panelModelName);
panelBinding.getBindingContext().put(panelModelName, bc);
return bc;
In Abstract class:
public void setBindingContainer(DCBindingContainer ctr) throws Exception
panelBinding = (JUPanelBinding)ctr;
if (panelBinding == null)
throw new JboException("System error "+getClass().getName()+".setBindingContainer, Panel Binding is null");
else
if (ctr.getBindingContext() == null)
throw new JboException("System error "+getClass().getName()+".setBindingContainer, Binding Context is null");
setBindingContext(ctr.getBindingContext());
// override this method if more panels to release in called panel
public void panelReleaseViews()
if (panelBinding != null)
panelBinding.release(DCDataControl.REL_VIEW_REFS);
System.out.println(getClass().getName()+".releaseBeforeClosing(), panelBinding.getName(): "+panelBinding.getName());
panelBinding.getBindingContext().remove(panelBinding.getName());
Example of call:
PACKAGE_NAME = static String defined in class
String panelModelName = "PanelFileTypeVO1UIModel";
DCBindingContainer bc = this.createBindingContainer(PACKAGE_NAME,panelModelName);
PanelFileTypeVO1 panelFileTypeVO1 = new PanelFileTypeVO1();
panelFileTypeVO1.setBindingContainer(bc);
// panelFileTypeVO1.setBindingContext(panelBinding.getBindingContext());
panelFileTypeVO1.revalidate();
add panel to collection
To release:
Iterate obver your collection, cast to Abstract class and call panelReleaseViews()
Regards
Fred

Where to download the Security Providers Component for Content Server

Hi,
according to the security providers guide (http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/extras/security_providers_guide.pdf),
the Security Providers component file, SecurityProviders.zip, is part of the
component update bundle for release 10g.
Does anyone know where to get this bundle?
Thanks in advance.

Hi 321sdk123
I would say that it is on metalink in the section patches & updates.
Is it for the RDBMS or the IAS?

Component ST-A/PI: release 01N_700SOL is incorrect, expected 01[M-Z]_CRM.*

Similar Messages

Maybe you are looking for