Component Usage Does Not Have an Active Component
Hi All,
I get the following error "Component Usage MASTERS_ALV Does Not Have an Active Component" i got the same type of error before and resolved but now i forgor how to do can any one help me in resolving this error.
Hi ,,
In WDDOINIT hook method you need to instantiate the component usage otherwise you will get such type of dump.
Paste the below code in WDDOINIT hook method view or component controller doinit then you will not get dump
data lo_cmp_usage_alv type ref to if_wd_component_usage.
lo_cmp_usage_alv = wd_this->wd_masters_alv( ).
if lo_cmp_usage_alv->has_active_component( ) is INITIAL.
lo_cmp_usage_alv->create_Component( ).
endif.
Regards,
Devi
Similar Messages
-
How to find a customer who does not have any activity in the last 5 years
HI all,
How to find a customer who does not have any activity in the last 5 years.
Thanks & Regards,
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Jan 3, 2011 2:20 PMPost Author: tzinser
CA Forum: Formula
Okay, I left off a lot of important information...
I'm using two tables
TWDATA
EVENT
From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
The two tables are linked by OrderNumber. -
I cannot delete this account because I do not have a password and it is not a valid account anymore. How can I remove this account from my iphone 4s ?
Just because it is an 'old' email doesn't mean it's not a valid Apple ID account.
Is the email that is showing one of your old email accounts? If so, did you ever edit your Apple ID and change the primary email of your Apple ID to a new email, or did you simple create a totally new Apple ID? -
ITunes 10.3.1 does not have an active icon to stream TV.
iTunes used to work. I now have version 10.3.1 and there is not even an icon to click to stream it to the TV. Is there some new way or did they forget to make the icon active? What am I missing here? The only other new thing I've done is get a lap top from which streaming does work.
Try updating iTunes, the latest is 10.4 (or check to see in case you already have it first)
-
The data object "T_ACCIT" does not have a component called "XTRNDP"
I am receiving an ABAP dumb following the execution of transaction MIGO (when posting the goods
movement). Attached is a copy of the ABAP dump and below is part of a dev_w log file.
I tried to look at table T_ACCIT in SE16 and I receive the message 'Table T_ACCIT is not active in the Dictionary'.
A Tue May 20 15:19:26 2014
A *GENER* request remote generation: SAPLRWCL.
A
A Tue May 20 15:19:27 2014
A *** ERROR => Syntax error in program SAPLRWCL [abgen.c 1828]
A {root-id=6431504C36361EE3B88A6D67BE3C41DE}_{conn-id=00000000000000000000000000000000}_0
A *** ERROR => > Include FICA_SAPLRWCL=================E line 5 [abgen.c 1830]
A {root-id=6431504C36361EE3B88A6D67BE3C41DE}_{conn-id=00000000000000000000000000000000}_0
A *** ERROR => > The data object "T_ACCIT" does not have a component called "XTRNDP". [abgen.c 1832]
A {root-id=6431504C36361EE3B88A6D67BE3C41DE}_{conn-id=00000000000000000000000000000000}_0
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
I *** ERROR => SemRel: Inv. Operation. Units 1. Key=51 [semux.c 1393]
I {root-id=6431504C36361EE3B88A6D67BE3C41DE}_{conn-id=00000000000000000000000000000000}_0Hi,
T_ACCIT is a table parameter of a fm and is of structure ACCIT. Also ACCIT can't be found in SE16 but in SE11.
Regards,
Klaus -
I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
ThanxI can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx -
Komp does not have a component "SERVICE_PARAM2"- Runtime error in VA01
When Creating a Sales order(Standard order typeu201D ORu201D and standard pricing procedure u201C) using VA01, System is giving following dump.
"The current ABAP Program "SAPFV45P" had to be terminated because it has come across a statement that unfortunately cannot be executed.
The following Syntax error occured in Program "SAPLV61A" in include "RV63A630" in line 9:
The data object "komp" does not have a component called "SERVICE_PARAM2". "
On analyzing the include "RV63A630" mentioned, the following error message is seen.
u201CNo field KOMP-SERVICE_PARAM2 exists in the latest version of KOMP in the ABAP/4 Dictionary.u201D
Can anyone suggest any possible solutions ?"The data object "KOMP" does not have a component called "TRI_OBJ_TYPE".
You may check any of the following notes
a) 339726
b) 601986
c) 783962
d) 798902
e) 1007550
If the above notes are of no use, then what I would suggest you is that you post this issue in ABAP forum so that you will get swift response.
thanks
G. Lakshmipathi -
The IC WebClient profile does not have a component 'ERP Sales Order'
Hi CRM Experts,
While creating the ERP Sales Order in web-IC
we have bumped into following error:
"The IC WebClient profile does not have a component 'ERP Sales Order'".
And also we are not able to see sales area data and Plant data in the drop down lists.
we have done the following settings:
1) ERP Sales Order Profile:we have defined ERP Sales Order profile,maintained RFC destinatin and assigned document type to ERP Profile.
2) Business Transaction Launcher: We have defined the Business Transaction Profile and assigned dependent business transaction.
3) We have assigned the Business Transaction Profile to the Navigation Bar Profile.
Please suggest me regarding above error also let us know did we miss any configuration?
Waiting for your valuable inputs.
Regards,
Sree.Hi Sree,
There is a setting needed for the IC webclient
ERP_SALES_ORDER
you need to define ERP sales order profile and assign it to your ic webclient profile.
And the ERP sales order scenario can only be used with a ERP 6.0 backend system, at least.
Hongyan -
The data object "BSEG" does not have a component called "ZZREGION"
Hi Friends,
Getting ABAP runtime error while doing MIGO-Goods receipt .
The data object "BSEG" does not have a component called "ZZREGION".
Regards
Ashucheck/activate table bseg in se11
A. -
The data object "FP_FORMOUTPUT" does not have a component called "XML"
Hello All,
When i tried to run a simple report with ADOBE form i got this message:
The data object "FP_FORMOUTPUT" does not have a component called "XML"
I saw that the field XML is really missing in structure fpformoutput!
Also in structure sfpoutputparams the field GETXML is missing!
Is there a note to fix this?
The system status is:
Database system ORACLE
Release 10.2.0.2.0
SAP_BASIS 700 0012 SAPKB70012 SAP Basis Component
SAP_ABA 700 0012 SAPKA70012 Cross-Application Component
ST-PI 2008_1_700 0000 - SAP Solution Tools Plug-In
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C PI_BASIS 2005_1_700
SAP_BW 700 0013 SAPKW70013 SAP NetWeaver BI 7.0
SAP_AP 700 0009 SAPKNA7009 SAP Application Platform
SAP_HR 600 0016 SAPKE60016 Human Resources
SAP_APPL 600 0009 SAPKH60009 Logistics and Accounting
EA-IPPE 400 0009 SAPKGPID09 SAP iPPE
EA-HR 600 0016 SAPKGPHD16 SAP Enterprise Extension HR
EA-GLTRADE 600 0009 SAPKGPGD09 SAP Enterprise Extension Global Trade
EA-PS 600 0009 SAPKGPPD09 SAP Enterprise Extension Public Services
EA-RETAIL 600 0009 SAPKGPRD09 SAP Enterprise Extension Retail
EA-FINSERV 600 0009 SAPKGPFD09 SAP Enterprise Extension Financial Services
EA-DFPS 600 0009 SAPKGPDD09 SAP Enterprise Extension Defense Forces & Public Security
EA-APPL 600 0009 SAPKGPAD09 SAP Enterprise Extension PLM, SCM, Financials
FINBASIS 600 0009 SAPK-60009INFINBASIS Fin. Basis
ECC-DIMP 600 0009 SAPK-60009INECCDIMP DIMP
ERECRUIT 600 0009 SAPK-60009INERECRUIT E-Recruiting
FI-CA 600 0009 SAPK-60009INFICA FI-CA
FI-CAX 600 0009 SAPK-60009INFICAX FI-CA Extended
INSURANCE 600 0009 SAPK-60009ININSURANC SAP Insurance
IS-CWM 600 0009 SAPK-60009INISCWM Industry Solution Catch Weight Management
IS-H 600 0009 SAPK-60009INISH SAP Healthcare
IS-M 600 0009 SAPK-60009INISM SAP MEDIA
IS-OIL 600 0009 SAPK-60009INISOIL IS-OIL
IS-PS-CA 600 0009 SAPK-60009INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT 600 0009 SAPK-60009INISUT SAP Utilities/Telecommunication
LSOFE 600 0009 SAPK-60009INLSOFE SAP Learning Solution Front-End
SEM-BW 600 0009 SAPKGS6009 SEM-BW: Strategic Enterprise Management
ST-A/PI 01L_ECC600 0000 - Application Servicetools for ECC 600
Thank you all In advance,
Eran FOXHello Otto,
Thank you for your reply...
If i enter se11 to see the structure of FPFORMOUTPUT for example... i get the following structure:
PDF FPCONTENT RAWSTRING 0 0 Form Processing: Content from XFT, XFD, PDF, and so on
PDL FPCONTENT RAWSTRING 0 0 Form Processing: Content from XFT, XFD, PDF, and so on
PAGES FPPAGECOUNT INT4 10 0 Form Processing: Number of Pages Created
LANGU LANGU LANG 1 0 Language Key
can you see any XML field here?
This is OLD as you said - but how can i get the proper one?
Thanks again,
Eran -
The data object does not have a component
Prior to making change to Z program, I did syntax check and got:
The data object "WA_D003" does not have a component called "ZSHIFT".
This Z program is in the End Routine of a transformation from a PSA to DSO. I get the error when syntax checking, but when executing the DTP, there is not an error and ZSHIFT gets populated as expected.
I am hesitant to make a program change and transport up.
This is all in our BW Development box. I checked the code against what is in BWQ & BWP and the code is exactly the same as is the DSO InfoObjects. However, in BWQ and BWP, I do not receive the error when doing a syntax check.
I've searched customer messages and have had no luck. I also treid to add an attachment to this question, but it won't allow me to. Thanks for any help.pretty hard to help you as we have no clue what you're actually doing with WA_D003 and ZSHIFT, no?
so you're calling a z-program in an end routine?
what does that program do? what are it's parameters/select options?
what are you doing with the results of that program in the end routine?
what are WA_D003 and ZSHIFT? I'm assuming the first one is a work area and the latter a field you're trying to fill in the end routine? -
The data object "LS_VBAP" does not have a component called
Hi, gurus!
We are trying to call a function for upload a data on the key figure
S076-Produ using a function module OIJU_sp_select_s076, however we are
facing a error in function OIJU_TRANSF_RDDOC_TO_WHIF, The data
object "LS_VBAP" does not have a component called". I didn´t find a SAP
NOTE speaking nothing about how can we solve it. could you help me?
We just need update a value on S076-Produ.
Steps for Reconstruction
Run se37 calling OIJU_TRANSF_RDDOC_TO_WHIF
Set Display...
After click or Ctrl+F2
Our system are stopping in the line 211 calling LS_VBAP-OID_SHIP
We know that we just need use function OIJU_sp_select_s076 but
internally this last one, is calling OIJU_TRANSF_RDDOC_TO_WHIF.
Did you already face it? Could you teach me, How can I solve this issue or wich another function and/or BAPI I could use to upload some external data (z program) from S076-Produ?The Reason may be that in Include MV45A_MSRF01 the VBAP Structure is Assigned to field Symbol <LS_VBAP>.
And you are Trying to Assign a field <LS_VBAP>-MSR_RET_ to a Variable or something.
But this field was there in Previous version but not in Current Version.
Regards
sandipan -
Data Object does not have a component called MATNR
Hi Everyone,
I am battling with a small program for 2 days as to why any output is not getting on to the list.
On CHECK, the error being shown is the
'THE DATA OBJECT "WA_ITAB" DOES NOT HAVE A COMPONENT CALLED "MATNR".
Report ZTR_REP1.
tables:mara.
select-options:s_matnr for mara-matnr.
types:begin of itab,
matnr like mara-matnr,
ersda like mara-ersda,
ernam like mara-ernam,
ekgrp like marc-ekgrp,
end of itab.
data: wa_itab like itab,
itab1 like itab occurs 0 .
select matnr ersda ernam
from mara
into wa_itab
where matnr in s_matnr.
append wa_itab to itab1.
loop at itab1 into wa_itab.
write:/ wa_itab-matnr,
endloop.
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 5:34 PMHi Ranjith,
Use this code it will work fine:
tables: mara.
select-options : s_matnr for mara-matnr.
types: begin of itab,
matnr like mara-matnr,
ersda like mara-ersda,
ernam like mara-ernam,
ekgrp like marc-ekgrp,
end of itab.
data: wa_itab type itab,
itab1 like itab occurs 0 .
select matnr ersda ernam
from mara
into corresponding fields of wa_itab
where matnr in s_matnr.
append wa_itab to itab1.
Endselect.
loop at itab1 into wa_itab.
write:/ wa_itab-matnr.
endloop.
<REMOVED BY MODERATOR>
Regards
Hemant Khemani
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 5:35 PM -
Error msg: Current user does not have privileges to perform product Activation
I am running Adobe Photoshop CS 8.0 on Windows Home Vista platform.
I keep getting this error message when I try to open Photoshop:
Current user does not have privileges to perform product activation. Run this application from a user account with administrative privileges or contact your system administrator.
I am the only owner & user of this software. I have re-installed the SW once (full install), and the error message went away for a while.
Now it's come back.
What do I do now?2 options:
Either disable UAC (User Access Controls) or run the application with Administrator rights. -
I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
"The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
ID: 2607"
What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
5) Neither service account is locked out
Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
Andrew ToppThat answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
as suggested by 331951, and that made absolutely no difference.
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
"doesn't have access to AD DS," which is obviously untrue)
The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?
Maybe you are looking for
-
My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I ha
-
Interactive Filter Saved Report Subscription by Email
Hi I did Interactive filter and saved a report. The interactive filter is performed between start and end date with a location details. I would like to have a custom header with title like this Data is obtained at Location Name from <start> and <end>
-
Get and hide all child symbols
I'd like to target all child symbol instances of my mT symbol and hide them. Something like this (except this doesn't work): childsymbols_d1 = sym.getSymbol("holder").getSymbol("d1").getSymbol("mT").getChildSymbols(); for(var i=0; i<childsymbols_d1.l
-
Setting debit/credit indicator
Hi, While postings the goods(MIGO), I am getting below error, but there is no any message in the error .Please look into this. Internal error while setting debit/credit indicator Message no. CON_FIN_ACCE_01331 Thanks, Chandu
-
Generate IDL from Java Code, Classes, UML, etc?
Hi, is is possible to generate IDL code from Java Code, Classes, UML, ... using JDeveloper? I know this is somewhat reverse engeneering, but it would speed up the migration of our existing Java project... Thanks, Johan