Components got over back flushed
Whenever, WIP completion transaction got failed in the mtl_transactions_interface, and their corresponding components were back flushed in the system.
When, we tried to reprocess the failed transaction (WIP Completion) , again all those components are getting back flushed again in the system.
Due to this, components are getting back flushed twice when ever the WIP completion transactions got stuck in the system.
We dont know why Inventory worker again triggering the back flush transactions again.
I tired all different combos on the memory, 1&2, 3&4, 1&3, 2&4, 1, 3, it will not boot in dual channel for anything.
I'm going to test my CPU in another computer tommorow to see if its my CPU, and I will RMA it aswell.
Similar Messages
-
The other day I was writing an essay while listening to my iTunes. Then all of a sudden, the power of my house went out. When we finally got power back, and I was able to open up itunes, over 700 songs of mine were deleted. When I looked in the trash, I saw two things labled "iTunes library extras", and "iTunes library genius". When I tried opening them, it said that I needed to open them with an application, and that I needed to chose one. I chose iTunes. When I tried double clicking on "iTunes library extras" after this, all it did was open up iTunes. Nothing else. Someone please help me because I had a lot of songs that I liked, and recently downloaded. And it will be a pain to get them all back if no one can help me.
Are the files still physically on your HD?
[User]/Music/iTunes/Media/Music is the default location. Unless you suddenly have a bunch of new "free space" on your hard drive, they're still where they were, you just need to create a new library file. -
my wifi worked for over a year then my parents took my ipod away for a month when i got it back the wifi didnt work i tried resetting my network it didnt work (it also says im connected) any suggestions?
they might have changed the password for the netowrk ..
-
Please help! How can I delete a file without deleting all my photos? I have just managed to delete all my more than 2000 photographs by choosing' Select all' and then delete. But I thought only 'all' the photographs in the file I had open would be selected! I have got them back, but I've also got back more than 800 others that I'd deleted SINGLY over the last 6 months! HELP!
Put a Photo in the iPhoto Trash.
iPhoto Menu -> Empty Trash
This removes the photo from iPhoto and the Hard Disk (in every version of iPhoto except iPhoto11)
In iPhoto 11 the file goes to the System Trash, you need to empty that too.
Regards
TD -
I had my laptop sent back to dell to fix and when I got it back all my Itunes music was gone , over 1500 songs . anyway of getting them back? I also lost my Itunes sign in and site that had all my music listed.
See Recover your iTunes library from your iPod or iOS device.
tt2 -
My phone just got voice over back on randomly and i cant get it off or scroll up and down!! help!!!!
my phone just randomly got the voice over back on and wont let me scroll up and down and wont shut off voice over---tried shutting down and back on but didnt help---------------help!!!!!!!!!!!
Try this...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
Restart / Reset
http://support.apple.com/kb/ht1430 -
Back Flush Compared to Manual GI
Hello,
I am comparing the pros & cons of Backflush with Manual GI to suggest the suitable solution .. the points that I could think at top of my head are as follows ..
Back Flush
Pros
Minimal human intervention
User's with limited understanding can function
Faster goods issue process
Cons
Large cumulative variance in system & actual stock figures over time in most cases
Not Recommended for high value material
Salient Feature: Suggested for low cost & less critical BOM components where there is not much financial/ logistic impact with variance within tolerances.
Manual GI
Pros
Accurate consumption can be captured
Better actual & system inventory figure sync
Accurate inventory figures enables better requirement planning
Cons
Recommended for matured users
Labour intensive (Manual activity)
Demand discipline in terms of reporting the consumption error posting due to stock deficit etc
Salient Feature: Recommended for high price & critical BOM components where consumption needs to be captured more accurately.
Please suggest your views on expriences across differrent clients ...Dear,
Apart from Bcakflush and manulgood issue please check this also, Good issue can be done through MB1A, COO1N, CO15. CO27.
Transactions CO27/COIK are lists, based on the order information system, whereas Transaction MB26 is reservation-based. However, it is also possible to make an order-based selection in Transaction MB26 using the 'Production order' selection window. In this case, both lists should also issue the same components for identical orders.
In the event of incorrect goods movements in Transaction COGI, picking using Transaction MB26 generates postprocessing records, whereas Transactions CO27 and COIK send an error handling. If the goods movements cannot be corrected, the records are returned unchanged.
Picking using Transaction MB26 can be scheduled as a background job.
This is not possible with Transaction CO27/COIK.
In Transactions COIK/COHV, you can use mass processing to store goods movements of the picking as future change records and you can then update them later using a report (for example CORUPROC). There is no function of this type in Transaction MB26.
Coming to your pron and cos,
In backflush you need to use the program CORUPROC to update COGI or terminted inccoreted good movement through OPK4.
Else it is very eassy process but 311 you need to use for transfer from the Ware House to Production stroage loaction.
Unplanned good issue you need to define in confirmtaion screen but there are chances of miss mach of quantity due to manual entry. So here you need screen control.
In correct good issue you need to cancle the confirmation but in Manual good issue you can do it seperatly.
But in manual good issue it is possible to confirm the order without good issue.
Hope it will help you.
Regards,
R.Brahmankar -
I have activated backflush in routing but when i am confirming the order goods movement screen is blank so i went to co02 and saw the BOM here backflush is not activted so i checked the backflush box and saved the order and again when i went to confirmation goods movement screen is availble with 261 movement.
here why the back flush is not happening even when i marked the backflush indicator in routing. it has happened for almost 20 production orders and it got stopped suddenly. But still the back flush is in active mode in routing.
so every time i am going to co02 and ticking the backflush in component overview.
I am using alternative BOM 2 is it effecting anywhere.
Thanks.Hi,
Backflush is used for material which are a must and having fixed relationship.
This can be configured in
MRP2 Screen,
Work center,
Routing and
production order.
If you configure this in routing or production order you have no need to activate this in MRP2 or Work center screen.
MRP2 Screen defines whether material components are always backflushed or work center to decide whether to backflush or mot.
If you want to always backflush your material then in MRP2 view choose 1 so that each time while confirmation it will backflush the material.
Yes, alternate 2 BOM is affecting.
Regards,
Alok Tiwari
Edited by: Alok Kumar Tiwari on Feb 13, 2012 11:30 AM -
I just got it back from the apple store and they reset it (becuase it kept shutting down and not turning back on).
I put in a new password because i needed to start over from factory settings, but now it doesnt let me log in anymore. (I don't know if this is because it doesnt accpet my password, or I forgot my password in less than 5 minutes, or because when i typed in my new password, i typed it in wrong twice)
Command R doesnt work, all i hear is a sound, but nothing happens.What I don't understand is why it is rejecting a password I am creating.
Perhaps the password you are creating is too short, or has characters that are not allowed, or is not secure enough because it is a word in a dictionary.
FileVault may have standards for what it considers an acceptable password. If the password is part of the 128-bit encryption scheme, it might have to be 16 characters, for example. (Don't know if that is true, but it's a possibility.) Check your documentation for password requirements. -
Batch managment and back flush
Dears
Some of my raw material is batch managment activated now i want it to be as back flush
so pleae tell me what will be the imapct of doing the same'
How system automatically issue the raw material from the old date batches
AFHi Abu Fathima,
Batch Determination step as follows:
For that you have to do five important steps or features you have to know OK.
1) Batch number assignment: We use this function to assign a batch with a number that uniquely identifies it OK.
2) Batch Specf: To describe each batch uniquely using like Characteristics and characteristic The values. are allocated in the material master.
3) Batch status management: To indicate weather a batch is usable or unusable: We can set (a) Manually in the batch master record or at goods receipt and (b) Automatically in the usage dissension in quality management.
4) Batch Determination: We can use this function for various criteria to search for batches that are in stock (a) movement type: When posting goods issues (b) When combining suitable components for order types.
5) Where used list: The batch where used list shows the path of the batch from its procurement to its delivery to the customer.
6) Active Ingredient Management: This function is to administrate and process materials with active ingredients that are to be handled in batches OK.
Condition types: Say for x material if we want to determine the batch at the movement type/ plant/order type.
Access Sequence: It will checks weather the batch determination is done with movement type/ plant/ material &
order type/ plant/ material.
Strategy type: We will assign here condition type and Access sequence and as well we have to maintain Class type: 023
sort sequence, batch split
Batch Search Procedure: Here we will define the search procedure and using the condition type here OK.
Batch Search Procedure Allocation and Check Activation: Here we will assign the search procedure to the movement types and for order types as well
HERE THE BELOW FOLLOWING DATA WILL GIVE YOU RIGHT UNDERSTANDING OK:
a) It will looks for the search procedures.
b) It searches through the strategy types in the search procedures for a valid search strategy.
c) Characteristics from the selection class of the search strategy looks for batches with suitable specifications.
d) Then it will looks for weather the batches are available.
e) It sorts the batches that are available according to the sort rule from the search strategy.
f) Then the system selects a proposed quantity with proposed quantity from the search strategy.
Go -
> Logistic General -
> SPRO -
> Batch Management you can find every thing there it self.
Any questions revert me back please.
Regards,
Madhu.G -
Failed to back flush in IDES 4.7 due to kp26 proplem
hi:
I Failed to back flush in IDES 4.7, and afterwads i found it was due to a system problem with kp26 which should be patched with KH47012. I tried spam ,but failed.I could not proceed. any opinions will be appreciated.
infomation below is from trans.log
4 ETW000 R3trans version 6.08 (release 620 - 04.02.03 - 14:54:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 25.03.2008 - 11:30:32
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d -w trans.log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Mar 25 11:30:35 2008 84745 0.084745
4 ETW000 [dev trc ,00000] db_con_init called 98 0.084843
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 53 0.084896
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ...
4 ETW000 990 0.085886
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0
4 ETW000 129579 0.215465
4 ETW000 [dev trc ,00000] using "D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll"
4 ETW000 109 0.215574
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded
4 ETW000 22 0.215596
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 47 0.215643
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "620.02", patchlevel (0.549)
4 ETW000 83717 0.299360
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 29 0.299389
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 35 0.299424
4 ETW000 [dev trc ,00000] New connection 0 created 26 0.299450
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO
4 ETW000 29 0.299479
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3)
4 ETW000 19 0.299498
4 ETW000 [dev trc ,00000] find_con found the following connection for reuse:
4 ETW000 20 0.299518
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO
4 ETW000 23 0.299541
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=D:\oracle\ora92 from environment
4 ETW000 19992 0.319533
4 ETW000 [dev trc ,00000] -->oci_initialize 693 0.320226
4 ETW000 [dev trc ,00000] Tue Mar 25 11:30:39 2008 3705588 4.025814
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC
4 ETW000 33 4.025847
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPHFS's password
4 ETW000 364 4.026211
4 ETW000 [dev trc ,00000] Connecting as /@HFS on connection 0 ...
4 ETW000 20 4.026231
4 ETW000 [dev trc ,00000] Allocating service context handle
4 ETW000 20241 4.046472
4 ETW000 [dev trc ,00000] Allocating server context handle
4 ETW000 36 4.046508
4 ETW000 [dev trc ,00000] Attaching to DB Server HFS (con_hdl=0,svchp=0197D4D4,svrhp=02EB3D4C)
4 ETW000 70 4.046578
4 ETW000 [dev trc ,00000] Tue Mar 25 11:30:51 2008 12424050 16.470628
4 ETW000 [dev trc ,00000] Assigning server context 02EB3D4C to service context 0197D4D4
4 ETW000 39 16.470667
4 ETW000 [dev trc ,00000] Allocating user session handle
4 ETW000 44346 16.515013
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0197D4D4,srvhp=02EB3D4C,usrhp=02EBC4EC)
4 ETW000 35 16.515048
4 ETW000 [dev trc ,00000] Tue Mar 25 11:30:57 2008 5350925 21.865973
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 40 21.866013
4 ETW000 [dboci.c ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 23 21.866036
4 ETW000 [dev trc ,00000] Try to connect with default password
4 ETW000 25 21.866061
4 ETW000 [dev trc ,00000] Connecting as SAPHFS/<pwd>@HFS on connection 0 ...
4 ETW000 20 21.866081
4 ETW000 [dev trc ,00000] Assigning username to user session 02EBC4EC
4 ETW000 20 21.866101
4 ETW000 [dev trc ,00000] Assigning password to user session 02EBC4EC
4 ETW000 26 21.866127
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0197D4D4,srvhp=02EB3D4C,usrhp=02EBC4EC)
4 ETW000 24 21.866151
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 373915 22.240066
4 ETW000 [dboci.c ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 26 22.240092
4 ETW000 [dblink ,00419] ***LOG BY2=>sql error 1017 performing CON [dblink#1 @ 419]
4 ETW000 72401 22.312493
4 ETW000 [dblink ,00419] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#1 @ 419]
4 ETW000 26 22.312519You need to discuss with your technical consultant
-
Hide Back Flush Indicator and Bulk Material Indicator in PM order
Hi Experts
Can any one help me, how to hide or display Back Flush and Bulk Material Indicator in PM order Components tab. Can we customize this or we need to do the modification in standard program.
Thanks is advance
Regards
N.SaidasanTry to hide it my using transaction variant tcode SHD0
If it dosent work then use
User exit
IWO10009 Maintenance order: Customer check for "Saving"
PPCO0023 (check changes to order components)
BADI
IWO1_ORDER_BADI
This will solve your problem -
Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem
Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone -
I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?
Deauthorizing won't delete anything, and all your purchased content is safe. You will just have to reauthorize any of the other computers that get deauthorized along with your computers old machine id.
To get your purchased content back on that computer, just use iTunes to redownload it (http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US). Of course, music you ripped from CD or got from another source you'll need to copy those files back over. -
REM Back flush using firmed planned orders
Dear Gurus,
We are using REM manufacturing process in SAP , we are doing backflush for stage wise confirmation and final confirmation.while doing this we are not referring any planned orders as reference.
if we update new part numbers in BOM the system asking for the availbilty of that particular new part numbers but physically we are having old materials .
we want to consume that old materials how it possible in the MFBF t.code.
if any one please help me , if I firmed a planned order with quatity or date then sytem will ask the old materials instead of new one.
pls explain what is planned orders and their impact on MRP ?
how we can firmed that planned, if i firmed what is the impact duirng backflushing?.
Thanks & Regards
Suresh babu.s
WIN - IS.
SureshHi
please compare the process when you create the production order manually in Co01 instead of creating the production order by converting the planned order.
Here you are carrying out back flush with out refering the planned order.
It is like creating the production order manually.
In such case system will always look the BOM as of now.
It will not refer any of the planned order & the components there in.
If you want to consume the old parts instead of new parts , you can delete the new part numbers & add the old ones in MFBF. this will be allowed by system.
In this case you are back flushing with out reference to planned orders.System will not ask for old components at all whether planned order is firmed or not.
Once if planned order is firmed a star (*) mark will appear in MD04 near the planned order number.
Once if the planned order is firmed, it will not be changed in subsequent MRP Run.
Hope it is clear.
Pl. award if it is clear else pl. update.
Regards
YMREDDY
Maybe you are looking for
-
Terrible delivery and customer service
My fridge broke so I went to the best buy in Roseville CA to get a new one on friday 10/17/14. Found an open box one that my wife and I liked and negotiated a deal for about $1887 total (that included 5 yr geed squad). They say it will be delivered
-
Help required in identifying the admin groups for a IT Resource
I would like to pick up the user details of the members in the admin groups of a particular IT resource. Can anyone help me in this regard..??? Thanks in advance
-
How do I set my own homepage to open when starting Firefox rather than the Firefox homepage?
When I open my web browser, I want to immediately access my Yahoo! homepage, not Firefox homepage. How do I make that happen? Thanks! Big Jim
-
Getting Data Components to export on Frame 3!!!
Finally went to ColdFusion and some data connectivity. Installed the Data Connection Wizard and DataGrid Column Editor and whatever else was there already for data/web services. I'm trying to get my standard preloader to work: 1) Import the Standard
-
Make File for C,Pro*C, Files in Solaris Server
HI, I would like to know how to write a Make File for C,Pro*C Files in Sun Solaris Server. Thanks, Vijaya.