Components not showing up in Flash CS5

What's the correct way to install components in Flash CS3?
first I tried to install the NewGrounds Ad component for AS 3.0 which delivers as an .xmp file. I doubleclicked it and in the Extension Manager it's listed as active under Flash CS5. I restarted flash, but the component does not show up in the components list.
I then tried to install the minimal components from http://minimalcomps.com/ which are delivered as an SWC. I went to the ActionScript 3.0 settings in flash, went to the "library path" tab and clicked browse to swc to select the SWC file. but these components don't show up in the components list either.
So what am I doing wrong?
Thanks

1. Go to HELP > MANAGE EXTENSIONS
2. Choose Flash
3. Choose FILE > "Install Extension"
4. Install xxx.mxp from below locations one of them (you may need to show system folders on Windows to see).
5. I checked these folders on my machine but they were empty,,, but I already have components installed.
C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration
if u can't find it try to go to the below path:
C:\Users\userName\AppData\Local\Adobe\Flash CS4\ar\Configuration
and copy all files existing in this folder to:
C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration

Similar Messages

Fonts not showing up in Flash CS5

Maybe I'm missing something simple but I just can't get some fonts to appear in Flash cs5 on mac osx. they work fine in Photoshop / Illustrator, but don't appear in Flash.
Any ideas?

You may find something useful in one of these links:
http://forums.adobe.com/message/3238692
http://jeremy-knight.com/2011/05/certain-fonts-not-showing-up-in-flash/

Video components not showing up in flash

I am only using Flash MX 6, so I hope it is ok, but I am
having a major problem.
First I need a video component that works, hopefully there is
a few one that is floating around out there.
I have a QT.mov, I have converted it to flash and I drop a
video component on it (surprisingly, it looks like the QT
controls). I test the movie, it works, but when I use the swf in
Dreamweaver on my page, the controls are no where to be seen. I
can't see them, therefore they are useless to me!!I have tried Muak
one, it doesn't seem to link to my movie no matter what I do, along
with VideoController 1_1 which doesn't seem to show up in my movie.
Has anyone else had this problem? How can I resolve it?
Thanks in advance.

1. Go to HELP > MANAGE EXTENSIONS
2. Choose Flash
3. Choose FILE > "Install Extension"
4. Install xxx.mxp from below locations one of them (you may need to show system folders on Windows to see).
5. I checked these folders on my machine but they were empty,,, but I already have components installed.
C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration
if u can't find it try to go to the below path:
C:\Users\userName\AppData\Local\Adobe\Flash CS4\ar\Configuration
and copy all files existing in this folder to:
C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration

Tags not showing up in Dreaweaver cs5

Hello and thank yuo for reading my problem.
I'm working on my website and i came across this issue:
Dreamweaver cs5 ''disabled''? some of the tags, for example <video>, <source>, <media>, and a few others. The only tag witht he letter v is <var>, i have no idea what the issue could be. I tried adding the tag within a div, outside the surrent div and throughout different places within the layout but nothing does it.
Will anybody be able to help me? Thanks in advanced.

UPDATE:
You can forget converting the fonts, here is what really helps:
Move all of your fonts from your user library to your desktop (or whereever, just make sure to remember where), basically uninstalling all your fonts.
Then put the fonts that you need & miss in FLASH into this folder: Macintosh HD/System/Fonts
Enter your user password to confirm the movement of the files into the system folder.
Restart FLASH.
Now the formerly missing fonts should show up in FLASH.
When you're done with your Flash Project, you can delete the added fonts from the system folder and move your old fonts back to your user library in order to get your sytem back the way it was.
WARNING: Be careful while in the system folder, you don’t wanna make any mistakes there. ^^
SICK that adobe is not fixing this issue which is really hell hell hell. Hope this helps you guys in the meantime.
cheers.

New installed components not showing in components panel in cs4

Hi,
I'm currently reading the excellent book "ActionScript 3.0
Quick Reference Guide". In some chapters, the authors ask us to
install third-party components. They install well in the Extension
Manager CS4, but for a reason I don't know, they're not showing in
the Components panel...
I use Flash CS4... but I also have Flash 8 and Flash CS3
installed (in fact, all the suites) and it never caused problems
before, so I don't think that's the problem... By the way, if I
install them in CS3, they show up in the panel.
FYI, I have a French Canadian Windows XP version and I work
with English Flash versions...
Particularly, the extensions I tried are:
- as3webservice by Pieter Michels (wellconsidered.com);
- Yahoo! Astra Library (by Yahoo!, of course);
- Accordion Panel V3AS3 (by JumpeyeComponents).
Thank you.

Well, we're making progress...
No, there're not in that folder, but from what I understand,
they shouldn't be there either, because in that folder, it's the
place for the default ones (that comes with Flash).
The ones that we add are in the Documents and Settings
folder:
So, since I installed the same components in Flash CS3 and
Flash CS4 (because they weren't working in CS4), they appear in:
C:\Documents and Settings\Nelson Therrien\Local
Settings\Application Data\Adobe\Flash
CS3\en\Configuration\Components... Good.
Now, do they appear in Flash CS4 (path C:\Documents and
Settings\Nelson Therrien\Local Settings\Application
Data\Adobe\Flash CS4\en\Configuration\Components)... NO!!
BUT!! I don't know if it's because I tried the French version
once or because I have a French Operating System, but I also have a
fr folder (full path: C:\Documents and Settings\Nelson
Therrien\Local Settings\Application Data\Adobe\Flash
CS4\fr\Configuration\Components) and... THEY APPEAR THERE!!
So, I copied them from the fr folder to the en folder and
Voilà! They now appear inside the Flash CS4 Components
Panel...!
Thank you for pointing me in the right direction!
Nelson

White Boxes from EPS Not Showing Up in INDD CS5

this is kind of lame, but I'm still curious...
I have an Illustrator eps file (CS4) that had black and white shapes, text, etc (very simple), however when I placed the eps file into InDesign (CS5), the white box did not show up. There is a black stroke around the box that appears, however the white does not appear. I went back and drew a new white box, resaved it and the new white box appeared. Any idea why the original file would not have come through properly?
(PS...I'm using Windows)
Thanks!

White set to overprint?
And stop using EPS...it's an archaic file format. Use native AI or PDF from Illustrator for best results.
Bob

ADF visualization components not showing in a region

I have a task-flow of JSF fragments, when I visit a page with adf visualization components they are not showing. I call:
region.queueActionEventInRegion(getMethodExpression(methodExpression),
null, null, false, -1, -1,
PhaseId.ANY_PHASE);
They dont show even iif I call
AdfFacesContext.getCurrentInstance().addPartialTarget(getRegion());
Only loads when I collapse a panel - which suggests they are there, loaded. Just not showing.

Hi,
if you want to refresh a region then either you call the refresh method exposed on the region or configure the Task Flow binding refresh condition to #{1==} (for always to refresh) in addition to the PPR refresh.
The first of your method really has nothing to do with region refresh and is for a different usecase
Frank

Components not showing in java 1.4

I have a small program where some JLabels, JTextFields, JComboBoxes and JCheckBoxes are shown in a JFrame. It works fine in JBuilder 7 but when I tried to run it outside JBuilder, where I have java 1.4.1 installed, the components are not showing correctly. The JLabels are not shown att all and the rest of the components are not fully painted, if at all. If I run it from the bin directory in JBuilder, where java 1.3 is installed, the program works fine.
Anybody have any idea what could be wrong?

I have tried compiling both with javac and in JBuilder and in JBuilder and java 1.3 it works fine, but with java 1.4.1 it doesn't.
I am not using any special JBuilder layout, I have written all the code by hand (haven't figured out the design function in jBuilder yet).

Pixel bender parameter not showing up in flash

I am writing a pixel bender filter to be used in Flash. When I run the kernel in Pixel Bender I can see and change all my parameters (float and float2), but once exported to a .pbj and embedded in Flash I get a "TypeError: Error #1010: A term is undefined and has no properties.". I have run a loop tracing the shader data and it does not show that the parameters are there I change the version number for each export and I am surely embedding the latest version.
Can someone please tell me why this would be happening, I am totally at a loss.
Thanks,
Chris

UPDATE:
You can forget converting the fonts, here is what really helps:
Move all of your fonts from your user library to your desktop (or whereever, just make sure to remember where), basically uninstalling all your fonts.
Then put the fonts that you need & miss in FLASH into this folder: Macintosh HD/System/Fonts
Enter your user password to confirm the movement of the files into the system folder.
Restart FLASH.
Now the formerly missing fonts should show up in FLASH.
When you're done with your Flash Project, you can delete the added fonts from the system folder and move your old fonts back to your user library in order to get your sytem back the way it was.
WARNING: Be careful while in the system folder, you don’t wanna make any mistakes there. ^^
SICK that adobe is not fixing this issue which is really hell hell hell. Hope this helps you guys in the meantime.
cheers.

Illustrator white not showing up in indesign cs5

I have a white illustrator logo as an .AI file. When I put print over view on, it is not showing up.
The illustrator swatch is set to white process 4 color.
I looked at indesigns attributes and nothing is checked.
Any thoughts?
thanks,
Jon

White objects inadvertantly set to overprint has been a problem since day one of the desktop publishing revolution. The day that a company or agency vectorized their logo is when the problem started. And the story goes like this: a logo is vectorized and colorized for multiple usage, in hopes to prevent trapping issues for the black version the art is set to overprint. Then someone realizes that a reverse logo is needed, takes the black version switches to white, not paying any attention to an overprint setting.

Fonts Not Showing Up In Illustrator CS5.1

Hi there,
Would anyone be able to help me, my fonts that are all installed to my computer and that are showing up in Photoshop are not showing up in Illustrator.
I have read a few forums on this topic but none seemed helpful. They basicly said to install your fonts or that illustrator has a font limit so you are out of luck.
Which I am hoping is not true.
Thanks in advance for any help.

Clear the font cashes and see here
http://kb2.adobe.com/cps/327/327791.html

Nikon Df Nef File Thumbnails not showing in Adobe Bridge CS5

HI,
I am having trouble getting NEF thumbnail to show in Bridge CS5, but only from the Nikon Df. All other, older, NEF files are showing up without a problem
I have installed the latest updates (Camera Raw etc)
I would appreciate any advice on getting this to happen.
Thanks
BD

Ok thanks for that, at least I wont be chasing my tail.
I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

Font showing in photoshop font list but not showing in the flash font list

Hi,
I have some issues with fonts. I am using a Mac OS X and i have installed the fonts into font book.
The installed fonts are showing up in my Photoshop CS3 font list but are missing from my Flash CS3 and CS4 font lists.
I am using .otf fonts.
Any help will be really appreciated .
Thanks,

Jude,
I don't know what the problem may be, sorry.
Since the fonts are not from Adobe, you'll have to either contact the foundry from which you've licensed them or post this issue on the Flash forum at http://forums.adobe.com/community/flash/flash_general

FlowLayout wrapped components not showing when nested in a GridBagLayout

Hello, I'm having a problem when adding multiple components to a FlowLayout that is inside a grid of a GridBagLayout. I'd love to post some code, but it's really entrenched, so I'll try to give an a decent verbal example below.
The problem is that when I fill a grid in the GridBagLayout, it happily goes to the end of the JScrollPane it's nested inside (this is necessary for vertical movement, but horizontal is disabled). When I add a JPanel to this right-most grid, and set it FlowLayout, and then add any n components, the components plow right off the right side of the screen (and again, having a horizontal scroller is not acceptable to the users).
I've tried screwing around with setting the preferred size: if I set the preferred width to 0 (or to anything smaller than the width of the JScrollPane), the FlowLayout wraps the components (good) but doesn't take up the height it needs to display them (bad). They get stuck "under" whatever is painted next. If I set the preferred height to some arbitrary value, it will show them, but maintains that value even when the window is resized, so again some components get buried.
Further, the arbitrary size that I'm setting can't be calculated, as I can't get the preferred size (or any size) of the FlowLayout until after it's been drawn to the screen!
Is there something that I'm missing here, or some trick that I haven't stumbled across before to make this work the way that I want it to? (That being that a JPanel nested in some grid in a GridBagLayout, and having sufficient GridBagConstraints, and being set to FlowLayout, will display all the components dropped in it, wrapping them as they reach the end of the JScrollPane that encapsulates the GridBagLayout).
Any help is greatly appreciated!

I've found a reasonable solution to my problem:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=780453
contains code for an extended FlowLayout called "BetterFlowLayout" which works in a much more friendly way with JScrollPane. It seems the problem wasn't so much with the GridBagLayout, but more with the JScrollPane. In any event, anyone having a similar problem can find (and modify) a decent solution from the post above.

Plz help me out!! Custom components not showed in JTabbedPane....

Hi!!
I am extending a JPanel and adding some components to it and finally when I create an object and add it to the JTAbbedPane its not being shown....If i do it disrectly on JPanel instead of my class its is being shown.can anybody...please help me out and tell where the problem is ...My code is as follows....
public class TabColorExample extends JPanel {
public TabColorExample() {
setLayout(new BorderLayout());
UIManager.put("TabbedPane.selected", Color.green);
JTabbedPane tabbedPane = new JTabbedPane();
String tabs[] = {"One", "Two", "Three", "Four"};
Color[] colors = {null, Color.red, null, null};
for (int i=0;i<tabs.length;i++) {
tabbedPane.addTab(tabs, createPane(tabs[i]));
tabbedPane.setBackgroundAt(i, colors[i]);
tabbedPane.setSelectedIndex(0);
add(tabbedPane, BorderLayout.CENTER);
JPanel createPane(String s) {
return new panel(s);
public static void main(String[] args) {
JFrame frame = new JFrame("Tab color Example");
frame.addWindowListener( new WindowAdapter() {
public void windowClosing( WindowEvent e ) {
System.exit(0);
frame.getContentPane().add( new TabColorExample() );
frame.setSize( 200, 100 );
frame.setVisible(true);
class panel extends javax.swing.JPanel
     panel(String s)
          super();
          JPanel p = new JPanel();
          p.add(new JLabel(s));
Thanx in advance...
Krtrao

Hi there,
Having that string in a mapping of DSO when DSO will process the SIDs it doesn't like that string and therefore throws an error.
You could for example transform that field in for example start routine or customer exit R/3 side, like for example split string with commas, and concatenate everything like this: 01,02,03 should retrieve 010203.
Other option is to first create master data texts datasource for that field PDP and for each key retrieves a string, like this for example:
010203 - text 01,02,03, or text MDTDWD
than when you fill the DSO with that field aready fixed in the form 010203, you can in the query represent it with text, it should represent in the form 01,02,03 or MDTDWD, see the picture?
You can do this kind of fixing of the filed 01,02,03 or in the start routine, or the transfer structure.
And to only get those records with the field being there, just write in the start routine something like:
DELETE <SOURCE_PACKAGE> where your_field is initial.
Hope this helps,
Diogo.

Components not showing up in Flash CS5

Similar Messages

Maybe you are looking for