Components required for each operation
Hi Friends,
In production order there are many operations. How can I know components required for each operation.
Thanks,
Kiran
Hi Kiran.
Select the operation in the prodcution order.
Hit component tab below.
You will find the component attached to the operation.
BR
Subbu.
Similar Messages
-
How to analyse actual cost for each operation in Process/Production Order?
Hi all,
IN SAP, I know that we can analyze plan cost for Operation in Process Order/ Production Order.
However, I can not analyze Actual cost for Operation .
I know the object when I good issue material is ORDER, not OPERATION.
But, as requirement of users, they want to analyze actual cost for each Operation.
CAn SAP do this analyze?
If Yes, What should I do in SAP to have this reports?
THanks in advance,
Emily NguyenHi Emily,
as I see from one other message that you're using material ledger. Then your expectation is apparently to also see the actual costs of materials in your production order by operation.
This is not supported. Actual material costs are handed up in material ledger multi-level settlement from one material to the next, bypassing the production orders.
That means the production order will always contain the material costs valuated at plan price, not at actual price.
For activity prices that might be better, when you revalue the orders at actual activity prices with CON2. But even there I am not sure that it will always be assigned correctly to the operations.
There is currently an enhancement in development, the operation level costing. But that will affect more the planned cost side not the actuals. Might be interesting to learn more about your requirements and the use case behind.
best regards,
Udo -
Objects required for transport operations
Hello,
I am preparing to upgrade and migrate databases from 10g on AIX to 12c on OEL6. I found a great doc that details the use of Transportable Tablespaces for metadata movement and RMAN for the migration of the datafiles from big endian to little endian. The doc is 371556.1. The only thing that is unclear to me in that doc is bullet 2 in the Goal section. It states:
2.- Import objects required for transport operations from the source database into the destination database.
I'm not quite sure to which objects this is referring. It sounds like there are objects that are dependencies for transport operations, but again, not sure what those objects might be or what the operations are (e.g. using exp or data pump in tablespace mode?)
Or perhaps it's referring to objects that aren't typically transportable/exported in tablespace mode, such as synonyms?
With the exception of that one bullet point, the doc makes perfect sense. If anyone has any clarification on this, it would be greatly appreciated.
Thanks!
JonIt looks like the link in my original post isn't working. The document is on MOS and is titled "How to Migrate to different Endian Platform Using Transportable Tablespaces With RMAN (Doc ID 371556.1)"
-
CRM ISA Software Components required for Netweaver CE 7.1
Hi Experts
We are planning to migrate CRM ISA Application to Netweaver CE 7.1 environment. Currently we are in Netweaver 7.0 portal in which our CRM ISA 5.0 component is running.
What are the Software components required for CRM ISA to be compatable for Netweaver CE 7.1 environment.
Basically we need to know the SCA versions for CRM ISA compatable for Netweaver CE 7.1
Any kind of documentation which describes SCA's and installation steps are very much helpful
Thanks,
cnuHi cnu,
Information about CRM Java component should be described in master guide, for example CRM 7.0 , these components are
SAP Shared Java Applications 7.0
SAP Java Data Dictionary 7.0
SAP CRM Java Applications 7.0
SAP Shared Java Components 7.0
SAP Shared Web Components 7.0
SAP CRM Java Components 7.0
SAP CRM Web Components 7.0
SAP IPC Mobile 7.0
TeaLeaf 4.5
you should be able to find the SCA files in service market place using these component name.
Interesting to know why would you migrate from 7.0 to 7.1? or you just want to PoC? I don't think SAP will you support you unless you have made a very good deal with them.
I also heard the version of web channel will bring some really good feature though it's still based on NW 7.0 with ehp, are you going to "migrate" it once again?
good luck,
Denny -
Production order: Cost analysis for each operation ?
Hello,
i want to select the detail plan costs (Setup, Labor, Machine) for each operation in a production order. Unfortunalety i found only the plan costs as summary for all operations. Only the time activities are available for each operations.
Can anyone help me ? If you have any suggestions, please let me know!
Best regards,
MichaelDear,
Why do you want the cost for closed order?
Order with Closed Status:
1. No more costing can be posted to that order(s). No more good movements and confirmation can be posted to order with CLSD status
2. The order can not be changed if it has CLSD status
3. There should not be any open PR for the Production order before setting CLSD status
4. Order balance should be zero before setting the CLSD status.
Else you can do this with Transaction BS22 (System Status: Maintain).
Select the system status I0046 by double-clicking.
Set the business transaction 'Permtd' for costing object.
I will not recommended to change the SAP standard setting.
Regards,
R.Brahmankar -
how can I use for each operation in jdeveloper 11.1.1.5.0 in adf fusion web application to show images stored in database?
How are the images stored in the database?
If it has the path - create the VO and show the images using foreach by creating a tree/table binding in the pageDef as follows:
<af:forEach items="#{bindings.BillToStateLOV.rangeSet}" var="item">
<af:image id="si9" source="#{item.src}"/>
</af:forEach>
If the images are stored as BLOBS, take the approach as mentioned in the blog post:
http://baigsorcl.blogspot.com/2010/09/store-images-in-blob-in-oracle-adf.html
Thanks,
Navaneeth -
SAP components required for implemeting SAP SRM MDM
Hi all,
Plz let me know , the SAP components required for implemeting SAP SRM MDM , for the following points:
· Internal catalogs hosted and maintained by buyer?
· Internal catalogs that are maintained by vendor (vendor will be using buyer's firewall)?
· External catalogs hosted and maintained by vendor?
Thanks and regards
HarishHi Harish,
The SAP components you would be needed are
SAP MDM5.5 or 7.1
- MDM server
- MDIS server
- MDSS server
SAP SRM5.5 or 7.0
SAP SRM-MDM business content
WAS engine typically used for deploying sca files given by SAP for configuring MDM as catalog. Mostly was engine of SRM is used in such case.
If you need an integration with backend system SAP PI will be used.
refer note
1057316 - SRM-MDM Catalog 2.0 - Installation & configuration.
refer article for understanding mdm catalog configuration steps
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
Regards,
Abhijeet
Edited by: abhijeet more on Apr 20, 2009 1:19 PM -
Barcode for each operation of production order
Hi, We want to use barcode for each operation of the manufacturing order so that by scanning it, it will display the data related with order automatically on screen. pls guide how to implement the same
it is done by myself.
-
Different inspection point field combination for each operation ?
Hi
I see that i can choose inspection point user field combination in the inspection plan header.
But what i need is to define different combinations for each operation,
Is this possible?
If not do u have any other suggestions?
Thanks,
Alper,Dear Alper,
I just meant in config .SPRO > Quality Management > Quality Planning >Inspection Planning >Define Identifier for Inspection Points
you can make use of all the identification field for your purpose ( Text length 18, text length 10, Number length 10, number length 3 )
operation wise what is needed to enter you make use of it
Only a suggestion
Regards
gajesh -
Components Required for CIC Web Client
We have a question about CIC installation components for CRM 5.
When we check the "Upgrade Master Guide" for "mySAP Customer
Relationship Management" ( Pages 58 - 61 ) for all CIC components, we
do not find that JAVA components are required for CIC ( Like JCRM).
When we see details from Best Practices Doucment for CRM component matrix, we see that its required.
We are not sure what to do. We were under the impression that Java
components are not mandatory for CIC forCRM 5. All we need is TREX and IPC.
Can someone please clarify/confirm ASAP as system needs to be build
accordingly. If we do need JCRM, what functionalities is this required for?
Thanks for help in advance.Hi Nikhil,
With 04s all required installations will be completed by default. Just that you have create a domain and the track to make use Webdynpro Components in NWDI.
Following are the SCs that are required.
DI Build Tool 7.00
SAP J2EE Engine 7.00
SAP Java Tech Services 7.00
This u can download from Service Market Place
Support Packages and Patches - SAP NetWeaver - SAP NETWEAVER - SAP NETWEAVER 7.0 (2004S) - Entry by Component - Development Infrastructure
Regards,
Nagarajan. -
The quantity received/required for each material (only sum of Dep and Foreq
Hi all
I have a report and I need it to show the <b>quantity received/required</b> for each material (<b>only sum of Depreq and ForReq</b>) in a plant due to MRP execution.
Basically something like MD04 showing each MRP element entry (only sum of Depreq and ForReq)
Do anyone knows a function, bapi, or other that can helps calculate this?
Thanks in advanceHi srivalli,
U mean that for every material u need sum of recieved quntity and required qunatity? if this is your requirement.
Try the synax below.
Example.
itab - internal table of any sturcture. suppose itab consits of materil and quantity fiedls.
sort itab by matnr.
loop at itab.
At end of matnr.
Sum.
Write: itab-matnr, itab-menge.
ENDAT.
endloop.
This syntax will display the sum of quantity for each material.
<b>Reward if useful</b>
Any thing please reply back if you have any other doubt.
Regards,
sunil kairam. -
VPN Password Required for Each Connection
Prior to installing 10.5.6, when I accessed my VPN the password was automatically sent. Now I am required to type it in for each connection, although my setup remains the same as it was. Can someone tell me how to do this automatically?? Thanks
Hi,
You need to upgrade the excel addin to 9.3.1.3 as it resolves the following issue
Spreadsheet Add-in. In the Login dialog box, Essbase was not storing non-default port information.
If Essbase was listening on a non-default port, that information was not being saved after having
previously connected successfully. Upon subsequent logins, it was necessary to re-enter the nondefault
server and port numbers; it was not saved in the Server drop-down list. Additionally, after a
successful connection on one sheet, re-connection was necessary after switching to another sheet
when a non-default port was used. [7118611, 7298976]
Ok?
Cheers
John
http://john-goodwin.blogspot.com/ -
New field NOTES required for each activity listed in BP factsheet
Hi Experts.
We are trying to have a new field NOTES for each activity listed in BP factsheet. For activity we have several fields like description, status , dates etc but notes (long text) is not there for the activity.
Could anyone help us out.
Regards,
RahulHi Saumya,
I want to use the standard activity notes field here.
My requirement is to display the column Activity notes in activities assigment block of account Factsheet.
BP_Factshheet/Activities is the view and the Context node BUILACTIVITY does not have the attribute activity notes.
Please give your inputs
Regards,
Rahul -
Components required for sending Email from SAP [Kernel Release 46D]?
Hi All,
Can somebody please tell me the components and the Configuration settings required for sending Emails from SAP system[Kernel Release 46D] to the mail server[Win NT] using SMTP.
From note 455127, I understood that "Sap Internet Mail Gateway" is required and there are other settings to be done. (SAPconnect with RFC can only be used as the Kernel version is 46D)
It will be great if somebody can explain me in simple steps if He/She has done this before.
Thanks,
VarunVarun,
sendmail comes with UNIX OS, there are versions of sendmail programs available for Windows too, but i guess you have to purchase them.
Another alternative is a discontinued product called SAP Exchange connector, if you have a Windows environment and MS Exchange server as your mail server, you could use a SAP exchange connector and get your SAP Email config done.
Regards,
Siddhesh -
SAP components required for DUET Enterprise integration
Dear Team,
I have installed "SAP NW702" trail version in my "WS2008 R2 Data center" machine succesfully.
I would like to install DUET Enterprise to integrate both SAP and SharePoint2010.
Could you please let me know "Release","Level" and "Highest Support package" details for the below components ,
WEBCUIF
IW_FND
IW_CNT
IW_TNG
Securitylibs(Security library)
SAP Cryptographic library
Thanks
S.JeevaHi,
Thanks for your response.
We have understand that SAP components have the "Highest Support Package" name for each item as listed in below.
Software Component - Release - Level - Highest Support Package
WEBCUIF - 701 - 0002 - SAPK-70102INWEBCUIF
IW_FND - 100 - 0001 - SAPK-10001INIWu2026u2026.
IW_CNT - 100 - 0001 - SAPK-10001INIWu2026u2026.
IW_TNG - 100 - 0001 - SAPK-10001INIWu2026u2026.
Could you please provide the complete "Highest Support Package" names for "IW_FND","IW_CNT" and "IW_TNG".
Thanks a lot
S.Jeeva
Maybe you are looking for
-
The Apple ID on my iPhone is incorrect when trying to update apps. It is correct in my Settings. I have signed out & signed back on & this does not make any difference. I have also changed my password and that doesn't help. HOW can I correct the
-
Since upgrading to ios7, I can't get face time or message to work. When I try to sign in with Apple ID, I get error message saying check wifi connection and try again. I looked at support pages but can't sign in. Face time works ok on iPod touch
-
Where can i buy the Mega 180 ??
I have read alllll about the new Mega 180 PC as well as the 400. I am really interested in purchasing the 180. All news/reviews I read say it was supposed to debut late September. Its now mid October and I can't find it anywhere!! What's the deal!? I
-
Smart form driver program for VF23
hi any one can tell me is there a standard driver program for a smartform to run transaction VF23. There is a Standard SAP script program named RVADIL01 . Is there a similar driver program for Smartform for the same Invoice List Transaction .
-
COS sales account in Account based COPA
Hi, I am new to account based COPA and like to implement it in parallel to costing based COPA. I understand that COS or COGS account triggered during delivery has to be created as cost element. What should be cost element category of COS account ?