Components vanish after planned order in is converted into production order
Dear SAP gurus,
please advise how to sort out the problem.
After update of BOM component in R/3 (usually change of the scrap factor) we observe that the component disappears after planned order conversion to production order.
Please advice how to track where exactly this happens.
Unfortunatelly it does not happen for all orders, some of the orders lose the component, others do not.
I desperately need a way to track or debug the order during conversion and CIF-ing from APO to R/3.
As far as I know there is an user exit I could activate to force BOM explosion at conversion, but would be interested to find the reason.
Your help and advise will be highly appreciated.
Thank you
BR
Ivan
Hi Ivan,
In R/3 CFC2 give user name of on which the SNP planned orders are generated, RFC mode "Q", Logging "D" Debug "R".
Then generate the Planned orders and flow them to R/3.
Go to SMQ2 in R/3 and debug. But it will stop all the queues whichever generated on that user name.
If you want to Debug the Production order whch is flowing from R/3 to APO, then Maintain the same parameters in APo at /SAPAPO/C4.
I hope this will help you..
Regards,
Kishore Reddy
Similar Messages
-
Number range error for some materials when converting into Production order
Hi,
Please I need some help with my error.
When trying to convert planned orders into production orders, I receive an error message saying Internal assignment not defined for number range XX.
The strange part is that is only happening for two materials! Material type is the same one we always use.
The planned orders have also the same type.
Any idea?
Thanks,Hi,
I think for these 2 materials system is selecting the order type for which external number range is marked and ingternal number range is switched off.
Can you go to CO01 and create a production order for these materials directly w/o assigning order type on intial screen. check which order type is detrmined by system and check its number range in co86.
please check. -
Sales Order Not Getting Converted to Production order
Hi gurus,
I have a sales order and when on MTO process i try using CO08 to create a production order using with order type ZP02 , sales order no , item no , production plant the production order doesnt gets created . could anyone help meHi,
What is the error message you are getting?
Are you using strategy group 20 in material master?
Did you try using other order types?
Regards,
Senthilkumar -
Planned orders are not converted into process orders in ECC.
Dear All,
The issue is that Planned orders with conversion tick are not publishing in ECC as manufacturing orders. We did check the relevant master data consistency between APO and ECC and it seems fine.
We have tried to send the conversion from APO to ECC,all the orders stuck in the R1P inbound queue with error - Order no. XXXX does not exist
Message no. C/006.
Based on above message and error we found SAP Note 515740 - Inconsistencies in table CIFORDMAP for this issue.
Used the transaction SE38 and created RCFORDCH report and 'Checking inconsistencies in table CIFORDMAP'
Here it shows order series stuck in queues no longer exists.
But not sure how to reconcile the inconsistency in the CIFORDMAP table.
Would appreciate your advice.
Regards,
Sajit SInghHi Sajit Singh,
Could you take some sample items struck for order conversion and check
whether active PPDS & SNP PPMs available.
In some cases, conversion will be affected for want of PPMs. If it is the
case with you, try generating the PPM first for that sample item and retry
converting the orders.
Could you please check and confirm this.
Regards
R. Senthil Mareeswaran. -
How to trace planned order data after it has been converted into production
Hi, There,
The planned order has been converted into production order.
However, I need to trace if this planned order is generated by MRP
run or created manually. I can't get any planned order info from
table PLAF. Any input?
Regards,
NancyHi,
Once fully converted, the Planned Order data will not be available in the Table : PLAF.
If it is available, then You can have the details with the Time Stamp and User data from PLAF.
But, the refrence will be available in the Production Order.
You want to make a Track of the Planned Order details and the Quanity, then you need to have/create Z tables so that the data will be availabe.
This is how most of the Organizations keep a track of the Planned order data.
Hope this helps..
Regards,
Siva -
Not to convert planned orders into production orders.
I donot want to convert all the planned orders in a plant into production orders on a specific date only ( SAY on 5th Oct -2007 planned orders should not be converted to production orders in a particular plant).pl tell me what customisation is required to be changed or else what is the solution.
jpbHi,
Planned order is just a system proposed order its upto the user if they want to use all or part of it, for this they have to convert them.. If you dont want to convert them you can delete them as else the SNP will keep considering it as a valid supply.
If the planned orders are not required on some particular dates on a permanent basis then you need to modify the Factory calender accordingly, so that the system will consider as if the resources are not available on thoese dates.
Reward point plz...
Regards,
manjit. -
Getting Error when convert the plan order into production order
Hi Experts,
When i converting the planorder into production order i am getting this error
could you please suggest me hoew can i resolve this issue.
Message no. CK466
Diagnosis
The system could not calculate a price for the internal activity with activity type 20000 of cost
center 110TUP002 because none of the valuation strategies in valuation variant 006 was successful.
System Response
If the system issues a warning message or an information message, the costing item will be
used in costing with a value of zero.
If the system issues an error message, it sets the status "KF" (costed with errors).
If the system issues a termination message, the cost estimate cannot be processed.
Procedure
1. Check the master data for activity type 20000 of cost center 110TUP002.
2. If you have authorization for Customizing, check the valuation strategy for internal activities
in valuation variant 006.
Thanks®ards.
Sateesh.CHi,
For the orders for which you get the error, note the dates, then check in KSBT, whether there is price maintained for that period.
Eg: If the order has a start - 2nd Aug, 2010 & end 10th Aug, 2010, then check if price exists for period - 08, year - 2010
Regards,
Vivek
Added
If the values are maintained, then check the costing variants specified for the order type in OPL8 for plant - order type combination in cost accounting tab. Then in OPL1, check the details specified for the variants. If you're not sure on this, take help from your FI-Co colleague. -
Converting a production order in PRQ (purchase requisition).
Hi,
how converting a production order in a purchase requisition?
Best regardshi,
u cant convert the production order into Pr.
ho ever u can procure the material against the Production order using the account assignment category.
also check with ur PP consultant for automatic creation of PR with ref to Production order, after exploding the BOM.
check MRP run. -
Partial conversion of planned order into production order of AFS material
Dear Experts,
I am working with SAP 6.0 EHP4 with AFS add-on. My material is AFS specific material. I am not able to convert planned order into production order partially from MD04 screen as all the fields in the CO48 screen is grayed out.
Please help...
Regards,
Alok TiwariHi,
I am not able to get what is passing the start date.
Second thing is how you are generating the serial number - manually or automatic?
If you are generating serial number automatic, then it is not possible to generate it considering the basic start date.
But if you are entering the serial number manually, then there should not be any problem as system will accept that serial number which you enter at the time of conversion of planned order to production order.
Regards
Amit parkhi -
No. of enquiries converted into sales orders
Dear Experts
is there any setting for measuring no.of enquirers converted into sales order
Regards
D.JeevanDear D.Jeevan ,
Take TCode: SE11
Put table VBFA.
Choose DISPLAY
press (ctrlshiftF10)
Give VBTYP_V (Document category of preceding SD document) as A
Give VBTYP_N (Document category of subsequent document) as C
Click on (CTRL+F7) or number of entries in the menu to get the total number of inquiries converted to SALES ORDER.
If you want to know the details about inquiry and the corresponding sales order created, click (F8) or execute button.
Thanks & Regards,
Hegal K Charles -
Dear Guru's,
we have a requirement i.e. user can convert planned orders in to production orders (CO41) based on those production orders we can get Route card( Z Smart form) presently we are using manual input for that Route card. recently we got requirement for this i.e. make to automatic generation of route card for this requirement we need to get the list of child's production orders based on parent production order
so as per my requirement i need to get all child part numbers production orders based on parent production order number and quantity i tried in MD4C and CO46 but those transactions codes are picking multiple lines also so for this requirement please give your valuable suggestions
Regards,
VenkatDear Friends,
Thanks for your reply,
My business process is MTS purely strategy 10, for route card all components with production orders we can give input as like bellow these production orders are converted from planned orders,between few components are don't have production orders those are F-30 materials,because of this reason i need link for production order to child components orders
01
IND1
IND1
A1CE2003520103-005
55685815
02
IND1
IND1
A1CE2003520103-010
55685814
03
IND1
IND1
A1CE2003520103-015
55685813
04
IND1
IND1
A1CE2003520103-020
55685812
05
IND1
IND1
A1CE2003520103-025
55685811
06
IND1
IND1
A1CE2003520103-030
07
IND1
IND1
A1CE2003520103-035
55685810 -
Spliting the sales order qty when iam creating production order
HI
I have sales order haveing qty 100 ,then iam creating the production order with respect to salesorder number and item by co08.
i want to split the order qty while iam creating production order .and after complitiung the sales order qty sysytem should not allow to create production order .
how can i do thisHi,
1. I dont think in standard it is possible.
2. You need to find a control mechanism using the user exit only.
reg
dsk -
Sales order number not exposed in Production Order DTW Template
Dear all,
Sales order number field(ie., OrginNum) is not exposed in dtw template of oProductionOrder,
As we need to update sales order number manually linked with production order after uploading prodn .orders thru DTW.
We are using DTW Version 2005.0.18 API Version 6.80.320
Whether this issue is solved in latest 2005 B versions ?
JeyakanthanAfter analysis,We should enter sales order DocEntry on field ProductionOrderOriginEntry.
-
Replicate the Sales order Line Item Text to Production Order
I want to replicate the Sales Order Line Item Text to Production Order? Please tell me if this is Functional job or a Developers Job?
I believe this can be achieved by customization and doesnot need any programming and I am trying hard to gather relevant posts for this, but didnt find any.
Please help me with some information if some body encountered this earlier.
Regards,
Jessica Sam.Hey Jay, thanks for your reply.
Please confirm me if this is a developers job or a functional job?
Do i need to do some programming to achive this?
I checked with couple of my collegues and friends and 90% people say it can be achieved throug functional configuration.
can thorugh some light on this as i had been researching on this seriously and still have mixed opinions .
Thanks,
Jessica -
Sales Order - Pick remarks copy to Production Order remarks field
Hi All
I need help with the query to copy sales order - pick remarks to Production Order when the Sales Order is linked with the production order.
Thanks
Bongani DlaminiHi All
I still need some help with this issue.
Here's the scenario:-
When a user captures a Sales Order , (s)he must enter remarks in the Logistics Tab --> Pick and Pack Remarks ( to be renamed to Production Remarks).
This info must be copied when a production manager or supervisor creates a production order and links it to the Sales Order field on the header .
Tried a couple or tricks but still nothing.
SELECT $[ORDR.PickRmark]
SELECT T1.[PickRmrk] FROM OWOR T0 , ORDR T1 WHERE T1.[DocNum] = T0.[OriginNum]
SELECT $[ORDR.PickRmrk]
Please help.
Thanks
Bongani Dlamini
Maybe you are looking for
-
Text Message with sent/receive time
I had a LG Voyager before the DX. When I got a text message it would show the time when the sender sent the message and the time I received it. So if I turned my phone on at 10 am and somebody sent a text at 8 am it would show sent at 8 received at 1
-
Error while accessing recruiter tab in Erecruit module
Hi All, We are using ECC 6.0 HCM along with eRecruiting and LSO. Since yesterday while trying to access eRecruitement pages, I have been getting this error 'Internal Error has occurred. Please try again later'. There is no error code associated with
-
Font issue when creating PDF from web page with Acrobat 8
I have a group of documents created with html/css that i am converting to pdf. Everything works slick except for some reason every HTML page that spans more than one printable page in the PDF the first page body text looks bold, the rest of the text
-
Database connection not closing on time out
Hi All, Not sure if this is the right place for this question but.. I've moved my app (built using jdev10.1.2., adf bc's and jsp's) to an app server. For some reason, the database connection is not closing. I have 46 connections to the database and I
-
I've looked this up elsewhere, and nothing has been working so far. I want to get advice before I do something that may cause more harm. I'm a new Mac user, so I don't know much about troubleshooting. My MacBook was working yesterday. I went to turn