Components will not assign to tabs in tab container

When I drag a new component (such as a Spreadsheet Table) to any tab on a tab container, it just becomes another object on the canvas (and not included within the tab or tab set).
How do I actually place objects within the individual tabs?

David:
Thanks for the response. I had just upgraded to xCelsius Engage 2008 and had not entered my product code in License Manager under the Help menu.
I had some functionality during my initial use after the upgrade, but not the tab container apparently. Seems to work fine now that I entered the product code.

Similar Messages

Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!

Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!

I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem.

FlashMX Components will not work in my new FCS2

Flash Communication Server MX Components will not work in my
new FCS2 ,
Components like: SimpleConnect, Cursor, Whiteboard, Chat,
Peoplist, AVpresence, etc.... all the old ones I have been using in
Flash MX. I now use Flash 8 it did not come with all the above
Components so I instaled (the old) in my Flash 8. I beleve there
may be script to up date the old (above Components) , or can I
download a set of NEW Components that do the same job as the old
(above Components) Please help I have spent 4 days on this HELP
Thank you. Raymck

It is a USB cord so I have to use the end of the Shuffle I use to charge th Shuffle.

WRT54G Wireless Router Will Not Assign a Network Address

A Linksys WRT54G router will not assign a network address when I access the router using a Linksys WPC600N wireless card. I have the same problem accessing the router with a TRENDnet TEW-621PC wireless adapter. Both wireless adapters are assigned network addresses when I use other wireless routers. Also, I have no problems being assigned a network address when I access the WRT54G router in question using an old 2WIRE 802.11b wireless card.
I have tried "Repairing" the connection, I have used ipconfig to "release" and "renew" the connection. However, each attempt fails to have a DHCP address assigned.
I am a visitor at the work location with the connection problem, the router works for others without any issues.
Thanks

Well in such case .... you can try few settings on the wireless adapter ....
If you are using WLAN monitor .....
Click start >> All programs >> Linksys wireless monitor >> Click on "Profile" >> Delete all profiles >> Click "New" >> Type in the wireless network name >> Click next >> Configure the rest of the wireless settings same as in the router ...
At last point it shows .... all the configuration settings ...reconfirm that >> Click on connect ot a network & reboot the computer ...
After reboot see if it shows connected or not....
You can also use Static Ip in the configuration ....

When I click on a bookmark, it will not open in a new tab, but I have this option checked?

I have two issues since upgrading to FF4. The first issue is, when I click on a bookmark it will not automatically open in a new tab. I do have this option checked in my preferences, but it will not work. The second issue is when I search in the Google box, I cannot click on the auto search option.

Bookmarks always open in the current tab unless you middle-click or use Ctrl + left-click to open the bookmarks in a new tab just like you do with other links.
There are extensions that can change that behavior.
*Tab Utilities Lite: https://addons.mozilla.org/firefox/addon/tab-utilities-lite/
*Tab Utilities: https://addons.mozilla.org/firefox/addon/tab-utilities/
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

TS4062 I recently updated i tunes, now my i pod will not sync, appears under devices tab but cannot select

I recently updates itunes, now my i pod will sync, appears on the devices tab but cannot select

Should have said"Will not sync" sorry.

Safari will not open PDFs in new tab

Whenever I open a PDF in a new tab, it doesn't show up. I can download it and open it perfectly fine, but it will not display in Safari...

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Some website will not load when their new tab comes up, just a blank page that says done on the bottom

if i'm on a site and click a link to open a new tab, the tab will open but the page never loads. i just get a blank page, and instead of the page name on the new tab, it says "click (GIF Image, 1x1 pixal)" and the address bar will have this http://click.linksynergy.com/fs-bin/click?id=6o8JG0hWlQI&offerid=143696.10000259&subid=0&type=4&afsrc=1&u1=01_2270023365_101019092649_184443883_Z. this happens to me on more than one site. i can't figure it out...please help. if you click on the link, you'll see what i see when the new tab open. i hope someone can tell me how to fix this.

Many thanks, solved issue I have had for weeks

CO-PC Cost components are not assigned when actual cost was posted

Hi Expert,
I estimate material cost by Tcode CK11N, the result is cost components were assigned to plan cost. It's okay. But, I have a problem when posting actual cost.
After actual cost was posted by confirming backflush, I run Tcode KKBC_PKO to check again, but Cost Component field is not assigned to actual cost.
Please tell me the reason.
Regard,

Hi,
Thank for your answer.
I will check Cost component Structure, and ensure that all cost elements were assigned.
Additional, cost components were assigned to PLAN cost, but not assigned to ACTUAL cost.
Do I have to configure something more?
Regard,

Components will not resize correctly in Catalyst

Download PSD: http://dl.dropbox.com/u/814249/campusariel.psd
Download FXP: http://dl.dropbox.com/u/814249/campusariel.fxp
I am completely new to Flash Catalyst (any and all versions). I am currently using Photoshop CS5.5 to design and Catalyst 5.5 to import and translate into a flash project. I recently picked up a job creating an interactive application for a college campus. I have attached my two project files for anyone who can help to view to see what is wrong. I have also attached inline screenies for those who cannot/will not download.
Here is my problem: I created the attached PSD in Photoshop with what I thought were the correct layers and groups/folders. I am hoping to achieve the following effect: when a user rolls over the purple buttons, multiple similar copies of that button that are initially hidden beneath the visible one popup in sequence above the rolled over purple button.
Ex. State 1:
Animation/Action Sequence to the following:
The purple popup objects will have their own text content and will be buttons themselves that a user clicks to change to a different state with more specific information.
Not only am I unsure of how to create such animation/action sequence, my purple components (whether I actually convert them to components in Catalyst or not) will not resize correctly. NOTE: I did click the resizable option when importing the PSD into Catalyst. The following effect occurs both ways. I add constraints to all objects by selecting all, right clicking, and choosing add constraints to all; the following occurs when stretched inwards using the resize test handle:
and this when stretched out:
When viewed using CTRL+Enter, the application is nowhere near resized in the browser window. I must be missing something, especially being new to Catalyst. I tried flattening the image in Photoshop, which obviously allowed the image to be easily resizable in Catalyst and the test browser window. However, I cannot use my separate elements when flattened; flattening defeats the purpose of Catalyst if I'm not mistaken.
Any guidance?
Message was edited by: joshlev

Hi Martin - Those are really good questions! I did check and the image is uploaded. I assume I can see the image in my one browser because of the cache since I could not see it on several computers that I had never pulled the site up on before.
And actually I have it working now. Nancy had a good idea to check to see if I saved it as CMYK instead of RGB. When I went to go open the file on my computer Photoshop and Fireworks had an error in opening it. They had a problem opening the one I downloaded from the ftp too. It just looks like somehow the file became corrupted! Not sure how, but that seems like what the problem was since I have a new image up there now and it's working fine again.
Thanks for all your help!
Liz

Linksys wrt54g will not assign address to macbook...

I don't know what to do. I have reset the linksys and rebooted the macbook numerous times. I don't have any idea why it will not pull ip. It just gets a 169.254.14.99 address.
I am on the neighbors wifi right now because mine will not work. I have 2 G3 dual usb white iBooks and a MacBook Pro that pull ips fine. This MacBook will not pull ip for nothing.
Any suggestions? I have upgraded the firmware on the linksys to 4.07 something or other? I think that is the newest.

Any suggestions? I have upgraded the firmware on the
linksys to 4.07 something or other? I think that is
the newest.
Are you using MAC Address Access Control?
Are you running a closed network (not broadcasting your SSID)?
Are you using WEP?
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
iFelix

When I click on a web link and hold down ctrl the page will not open into a new tab, it is just opening in a new window. How do I correct this?

When I use to hold down the ctrl key and left click on a web link, the page use to open into a new tab. For some reason this is not working anymore. Instead when I hold down the ctrl key and left click on a web link, the link will open into a new window. How do I fix this?

I figured out how to correct it. Not sure what exactly was happening. But I started into private browsing and then turned it off. It's been working correctly ever since I did private browsing.

When i click on a bookmark, it will not open in a new tab

I just got a Macbook Pro and installed Firefox. On a PC, whenever I clicked on a bookmark, it opened in a new tab. The same settings do not work on a Mac. The bookmark opens in the same tab I was on. Help please

Hello,
My understanding is that the default action for left clicking a bookmark is to open in the current tab. If you want to open in a new tab, the middle click button is usually the way to do it.
Alternatively, you can install the following extension which will force all bookmarks to open in a new tab:
* https://addons.mozilla.org/en-US/firefox/addon/open-bookmarks-in-new-tab/
Or this extension which will provide more options for tabs (including what you want):
* https://addons.mozilla.org/en-US/firefox/addon/tab-mix-plus/

Additional tabs will not open when clicking the "+" tab at the top of the screen or by clicking "file + new tab"

I've been using Firefox for several years and just ran across a problem within the past two weeks. I usually have several tabs open at the same time while browsing the Internet. Suddenly, when I tried to open a new tab by clicking on the "+" tab at the top right of the screen, a new tab would not open. Then I tried clicking on "file + new tab" and a new tab still won't open. If I click on a link within an email, then a new tab will open, but I cannot choose to open a new tab. Please help! Thanks! :)

In addition to the above:
Your above posted system details show multiple Java Console extensions.
You can uninstall and remove Java Console extensions, you do not need them to run Java applets.
See:
* http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

Will not open link in new tabs, some of my add ons are not working properly

I am using Firefox 3.6.6
My add ons, such as Gmail Notifier and Forecast Fox are not showing up on the bottom, but they are all enabled and updated. Also, when right click and select Open Link in New Tab, it opens an Untitled tab.
== This happened ==
Every time Firefox opened
== I'm not sure when

The current version of Greasemonkey is compatible with Firefox 29. Could you check to make sure it is not turned off? There should be a "monkey" icon on the toolbar. Clicking that icon turns Greasemonkey on and off; the "off" state is designated by a faded icon, while the "on" state has a full-colored icon.
More generally, could you check for possible extension updates and disable unimportant extensions in case one of those conflicts with Firefox?
Open the Add-ons page using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, look for the "gear" button above the list and choose Check for Updates.
I also suggest disabling any extensions you won't be using for the next 24 hours so that you can test whether that improves Firefox's functioning.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any difference?
One possible reason for hangs, especially where you eventually get a dialog indicating that a script is running slowly, is Flash. To minimize sites from using Flash unnecessarily, try setting Flash to Click-to-Play ("Ask to Activate"). This will delay Flash from starting on a page until you approve it.
On the Add-ons page, in the left column, click Plugins. Look for "Shockwave Flash" and change "Always Activate" to "Ask to Activate".
When you visit a site that wants to use the Flash, you should see a notification icon in the address bar and one of the following: a link in a black rectangle in the page or an infobar sliding down between the toolbar area and the page.
Any noticeable difference?

Components will not assign to tabs in tab container

Similar Messages

Maybe you are looking for