Composite AV Cable will play video and audio, but not music

I just bought an Apple Composite AV Cable to use with my iPod touch 3rd gen. It will play videos and the accompanying audio through the TV with no problems, but it will not play just music. What's the deal?

No. However, you can get a cable from the headphone jack to an audio input for your TV.
The Apple universal dock also has audio out.
http://store.apple.com/us/product/MC746LL/A/apple-universal-dock?fnode=72

Similar Messages

  • My IPod Touch 4th Gen easily syncs videos and photos, but not music

    I should mention that since my last sync I successfully transferred my ITunes Folder to a separate hard drive.
    This went smoothly and all the files made it.
    Since then I have been all through i-Tunes and everything was fine.
    When I synced, tv shows and videos that I added were synced.
    Also new apps from my i-pod were synced with ITunes.
    Then, it synced my photo album.
    The music that was originally on the i-Pod is still on my computer, and the sync check marks were still in place.
    I added a few extra albums too
    But when it synche, it only pulled down one song.
    The PLAYLISTS, ARTISTS, AND ALBUMS were all empty
    I did the process several times and each time it would tell me it's syncing photos, then it would be done.
    It didn't touch my music at all.
    Has anyone else had this experience?
    If so, please assist.
    regards and thanks in advance.

    Additionally, I took note that the ONE song that synced was checked within the LIBRARY list
    and NOT within the music list within the I-Pod Window.
    So, I have manually checked the songs that I want and it appears that the SYNC is happening correctly.
    So my actual question is:  How can I divert control back to the listing within the I-Pod Window (which I'd prefer to use) and let it be the default rather than the whole music Library?

  • I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync.  They work fine when played in Quicktime.

    Hello,
    I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program.  It appears to work fine in Quicktime.
    Thanks in advance.

    mbgoodwi
    Thanks for the reply. This is the plan.
    Open Premiere Elements 12/12.1 to the Expert workspace.
    In the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, select the project preset
    NTSC
    AVCHD
    AVCHD LITE 720p30
    OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
    Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
    Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
    into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
    Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
    There should be no colored line over the content if the project preset matches the video properties. But, if you do see
    that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
    the Render button above the Timeline.
    Do your video/audio now play back in the Edit area monitor in sync?
    Please let us know the result, and then we will decide what next.
    Thanks.
    ATR

  • Does the HDMI cable carry both video and audio? U

    Does the HDMI cable carry both video and audio?
    If so what is the purpose of the separate optical audio connection?
    Just a little confusion setting the Apple TV Up with my AV receiver.
    TIA.

    You would use both HDMI and optical by connecting the former to a TV and the latter to a receiver that doesn't have an HDMI input so that you could play the audio through your stereo system.
    You can use the HDMI alone, typically directly to the TV or through an A/V receiver, as HDMI does carry both video and sound.
    For the year prior to the disastrous 4.4 updates a couple of weeks ago, you could use optical alone to add AirPlay music capabilities to your stereo system, so that you could stream music from iTunes and devices like the Touch and iPhone to your stereo. The 4.4 update broke that capability, requiring the use of HDMI for no reason. Lots and lots of people have been complaining about that bug, as it effectively bricks the Apple TV for anyone who bought it for this purpose but can't use the HDMI connection.

  • I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips?

    I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips? This is not hack/ripped video but a legit home movie.

    In this case, it looks like Quicktime wasn't very efficient in managing memory, leading to a slowdown in playback. If QT has a lag and VLC doesn't, that's more evidence.
    I couldn't say why your friend's windows computer plays the media fine, while your Mac doesn't. The only thing I could suggest is to disable QT streaming video - which has been known to slow down performance.

  • I bought an HD video off itunes, it will play on myIpad mini but not on my HD computer. When i try to download it to my Computer, it says my Computer isn't HD, but it is! its a Dell XPS 1330 with HDMI.....

    i bought an HD video off itunes, it will play on myIpad mini but not on my HD computer. When i try to download it to my Computer, it says my Computer isn't HD, but it is!  and the oiption it gives me is to rebuy an SD version.......BS!!!      my laptop plays HD! its a Dell XPS 1330 with HDMI.....how can i get this HD Ted movie to play on my laptop, as my mini pad has no HDMI cable to plug into my TV.

    Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!

  • How can i fix a clip when the video and audio are not matching up?

    How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

    I would try detaching the audio and the dragging the audio to the left or right until it lines up.

  • My Video and Audio are not syncing up after importing

    I am trying to edit a few Ipad Clips in premier pro.  My video and audio are not syncing.  They are .mov lower resolution from the ipad.  The original audio is fine - but after I put in a sequence the audio is off a few seconds (ahead).  I did not add any affects or change anything.  Please advise?
    Thanks for any help in advance.
    Allison

    Premiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.

  • Linked video and audio do not move together on timeline

    Hello, I have been working in a project for a couple of days and cannot find out why the video and audio do not move together when one of them is dragged laterally on the timeline. They are linked yet do not move together. I seem to remember one of the first clips I dragged down to the timeline did what it should but they do not behave as they should. If I click on both clips the only option is unlink. When I move one part in the timeline it shows me how much they are out of sync.Any ideas?
    ~Grant

  • Video and audio tracks not synchronized after importing

    When I try to watch a video in quicktime or itunes video and audio tracks not synchronized. If I wach on another player they are synced. Anyone help?

    John:
    Thanks for your reply.  Excuse my referring to you as "Kevin".  I'm new to the Adobe Community.  I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself.  I'm going to try both solutions.  Whichever works I'll be sure to reply to the thread with my findings.  I found this article which provides the following solution:  http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

  • HT204406 My mix tape music will play on my laptop but not on either of my iPhones, is there a fix for this?

    My mix tape music will play on my laptop but not on either of my iPhones, is there a fix for this?

        Let's fix this kacheson! Please back up the device and complete a restore via iTunes by following the visuals here http://vz.to/1hYsMpP Please test and keep me posted. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport

  • Firefox doesn't play video and audio, cann't download anything!

    A very strange problem occurred a few days ago. I didn't pay attention on it at first ( I thought it was caused by my provider) but now I found that it's a real problem. Firefox doesn't play video or audio. For instance, it starts loading and that's all. The same is with playing music. In addition, I can't download any files and view a big image as quick as early.
    What is more interesting sometimes Firefox just begins to work in ordinary way.

    There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
    If you want to try "hit and miss", you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. Perian, which rolls several codecs into one package, might also work.
    If you just want to play the movie any way you can, you can also give this player a try:
    http://www.videolan.org/vlc/
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • Can't play Video and audio tracks.

    What software components are necessary to play the video and
    audio tracks on OTN.
    I'm using Windows 2000.

    Most of the iDevelop 2001 videos and audios require a Real
    Networks player.

  • Video and Audio do not match up in Photo Booth

    When I record a video in Photo Booth with my built in iSight video camera, the video and audio do no match up. The audio plays, and then about one second later, the corresponding video plays.
    P.S. This has only been an issue since I updated to 10.5.2.
    Please help, as I am relatively new to Mac OS.

    Hello [dot]Zac
    Try the following:
    • Backup your Home Folder, or at very least, your important files.
    • Repair permissions. (Click here if you need help.)
    • Then download and apply the Mac OS X 10.5.2 Combo Update.
    • Finish with another Permissions Repair, and then check your iSight again.
    Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • FME Firewire Video and Audio Support(not from Camera)

    I can't seem to find any definitive answer on weather FME can
    support both video and audio from a single Firewire connection that
    is coming from an analog to digital Firewire converter box. I want
    to take the analog audio and video feed, convert it to a Firewire
    feed (using a Canopus DV converter) and feed that into a laptop.
    Seems like that should work and both audio/video would be
    present...
    That being said, I have found a few conflicting reports on
    weather or not both the audio and video will be recognized. I also
    note that others have been having issues in FME with PCI cards (no
    audio when it should be there) so I'm curious if anyone has tried
    Firewire (not from a camera). Will it work in FME v2.5+? If not, is
    there an elegant laptop analog to digital conversion solution (that
    doesn't require using the crapy mic in or line in ports)? (RCA
    connectors would be preferred.)
    Thanks so much!
    P.S. I'm disappointed with Adobe's lack of support on this
    encoder. They claim Firewire is supported but I've only found a few
    3rd party sources that say 'video only' and nothing concrete at
    that (even in the downloadable manual). I'm also disappointed at
    Adobe's lack of e-mail support for 'pre-sale' product questions.
    Not supper great customer service!

    FME should support audio and video from Firewire
    source.

Maybe you are looking for

  • Tables or FM needed to get purc req for a sales order

    hi when you go to the /sapapo/rrp3 transaction ( product view ) in SCM system you will get lot of views for a given product and location like elements, periods, pegging overview etc.,. . In the pegging overview for example we have recpt element and r

  • Tables to see credit data of the customer.

    Hi Is ther any table which gives the data for the below mentioned fields Customer CCA Credit limit Credit exposure credit limit used I checked with F.35 but it is giving only the data for customer and CCA. thank you, Malli.

  • Mail will not open, nor can I select Preferences or anything else. Help.

    Mail account does nothing -- cannot open, select Preferences, etc.

  • How to resize a window with out a mouse

    Hello There are times that I rather not use a mouse, my question is How do I resize a window or drag it to make it larger not using a mouse but using the touch-pad and keyboard. I usually put the mouse pointer in the bottom right hand conner of the w

  • Learning Struts...Struts Loop....What's Struts...

    Hi guys i want to learn struts.i am quite familiar with java ejb jsp servlets etc.. i just wanted to learn this framework can any body provide some guidelines how to go about i mean can some some give me a sample code and all the jar files needed.. P