Composite cable doesn't work with iOS 8 on ipad

I have the iPad3 and a composite cable Video/audio.  I have been able to use these to watch videos from the ipad on my tv. Both sound and video worked, until I upgraded to IOS 8. Now it does not work.

What product are you using for that? I'll check to see if it's Apple approved. If it's not, then havimg it stop working is possible.

Similar Messages

  • Official Apple Composite Cable DOESN'T WORK with iPhone 3GS firmware 3.1.2

    I've tried everything and I cannot make the official apple composite cable (MB129LL/B) work with my iPhone 3GS 3.1.2.
    I get no video output AND no sound as if the cable is simply not made for my 3GS
    What do need to do to get composite video output on my 3GS 3.1.2????

    "The 3GS will not work with a Composite cable. It will only work with a Component cable. See here: http://support.apple.com/kb/HT1454"
    I have had no luck with getting the component cables to work with my 3GS. They are the Apple branded cables, not some knockoff. I would be angry if I needed to buy the universal dock to get them to work. Per some of the forums I've read, it is not needed. Also, from all the reading I've done on the TV out feature in this forum and others, it appears to be a hit or miss whether it works or not.

  • TS1702 How do I hide purchased apps with iOS 6? With iOS 5 you can swipe the unwanted app to hide it, but this doesn't work with iOS 6.

    How can I hide an app from the list of purchased apps using iOS6? With iOS 5 you can swipe the icon to display a red Hide icon, but this doesn't work with iOS 6. Suggestions (that work) will be appreciated.

    Yes. On a computer. Not ios6.
    On iTunes on your computer under purchased, select the x on the top corner. That will hide them.

  • ITeufel Radio v2 doesn't work with iOS 5.0.1

    My iTeufel Radio v2 doesn't work with iOS 5.0.1.
    It does not charge (just a short "beep" when connecting, but then it does not charge) and the audio function also doesn't work.
    I already tried to reset the phone, but this didn't help.
    Any ideas? Thank you.

    I got Wi-Fi to reconnect by restarting my router and re-entering the wireless password. I wonder if the wireless account passwords were lost in the update process? I wonder if I would have just had the phone “forget” the wireless account and reconnect if that would have worked.
    On an interesting side note, the exchange server connected after I got Wi-Fi back working! I am wondering if there is a issue with 3G and the new IOS 5.01? I could not get any exchange connectivity after the update on 3G.

  • Itunes Sync doesn't work with iOS 8.0.2

    Hello,
    after updating to iOS 8.0.2 on an iphone 5S the itunes syncing with an USB cable doesn't work anymore. A message is listed to "authorize" this computer, but it is already authorized. The iPhone isn't listed in the devices list with this itunes account either.
    suggestions anyone?

    Hi ..
    Try this on one device to test.
    Tap Settings > Safari then tap to clear History, Cookies, & Data then reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Then try writing a post in ASC discusions.

  • Calendar sync via cable doesn't work with now I've updated to Maverick and ios7

    Calendar sync via cable doesn't work now I've updated to Maverick and ios7.

    I am sorry you are having this trouble. 
    Here is an article on troubleshooting calendar syncing with iCloud.  See if the suggestions there are of help.
    http://support.apple.com/kb/TS3999

  • Apple Composite AV cable doesn't work with my iPhone 3G (3.1.3)

    Hello,
    Just purchased composite AV cable from apple store but it doesn't play videos on TV but audios only,
    Is it firmware or my cable prlbme?

    I used the original Apple composite AV cable with my iPhone 3G (OS 3.1.3) for a while and it worked fine for video playback in the iPod app. But after upgrading my iPhone 3G to iOS4 the cable stopped working. Video on my TV remains black and is shown on the iPhone's screen instead of the TV, and sometimes the iPhone tells me that this accessory is not designed to work with this iPhone. What did Apple do? Is there anyone who can confirm this change in behavior? Apple still recommends this cable in this article: http://support.apple.com/kb/HT1454?viewlocale=en_US
    Regards,
    Marcus

  • HT1454 iphone 4, composite cable no longer works with ios6 update

    I have the iphone 4, and I used an apple composite cable to watch youtube, videos, etc on my TV through an AV input. But when I upgraded from IOS 4 to IOS 6, it no longer works. Says something along the lines of "accessory not supported" or close to that. The iphone used to go into a display mode, where nothing shows on the phone's screen, and everything shows on the TV. But now it doesn't even do anything but give me an error message. Any ideas?
    In sum, it worked before, but updated, and now no longer works.

    It was the cable connector seating.
    It looked fully attached, but on removal and FIRM attachment it worked.
    If the AV iPod connector is not fully seated you get this error. The old iPod connector used a locking connection with a positive click, the AV cable uses a lockless connector that differs from the newer lockless iPhone connector. I suspect the AV cable connector was a transitional design that may have more connectivity issues.
    Message was edited by: jfaughnan

  • My Apple AV composite cable no longer works with my 3G iPhone. Anyone else?

    I purchased an Apple composite AV cable from my local Apple store shortly after I bought my 3G iPhone.
    It worked then.
    I haven't used it much, but this morning I tried it again.
    This time I got a message something like this:
    "This accessory was not made to work with the iPhone. Would you like to turn on Airplane mode to reduce interference?"
    It works with my older 3rd generation iPod.
    This isn't an after-market cable. I bought it (yes, $50) at an Apple store because I knew Apple had shut out non-Apple connectors with the new generation devices.
    I've seen various messages about failures of the AV cables after the 2.1 update. Most refer to aftermarket cables, or Apple cables purchased indirectly (may be counterfeit).
    Has anyone else run into this?
    I suppose I'll have to go back to the Apple Store with the cable and receipt and see what they can do about it.

    It was the cable connector seating.
    It looked fully attached, but on removal and FIRM attachment it worked.
    If the AV iPod connector is not fully seated you get this error. The old iPod connector used a locking connection with a positive click, the AV cable uses a lockless connector that differs from the newer lockless iPhone connector. I suspect the AV cable connector was a transitional design that may have more connectivity issues.
    Message was edited by: jfaughnan

  • 40GB iPod Photo came with FW cable, doesn't work with FW cable

    I have a 40GB iPod photo that I love. I bought another (used) one for my wife, being careful to get the identical model so we could share things such as docks, cables, etc.
    Her iPod works fine with the USB cable, but will only charge with the FW cable -- no computer can see her iPod through FW. I've reset the iPod, updated it with the iPod updater, but nothing. When I connect her iPod to any of my Macs (her 12" iBook, my 12" PowerBook, my G5 iMac) with FW, the iPod appears to be charging, but is not detected by the computer, nor are any of the iPod controls usable. It doesn't go to the "do not disconnect" screen, but simply freezes where it is until the FW cable is disconnected.
    Specifics: both iPod Photos are the 40GB model M9585LL, version 1.2.1. The 2nd one CAME WITH a FW cable, which is why I'm puzzled that it won't work with it. Help?

    Here is some info for the pinout for the iPod.
    http://www.anythingbutipod.com/archives/2006/04/zen-vision-m-video-cable-other-4 pole-35mm-pinouts.php
    You need to find the pinout of the camera cable you have.
    Probably be easier to get get an AV cable with a 3.5mm plug to (whatever fits into your TV) cable.
    Usually, you simply have to swap the Red and the Yellow for it to work properly.

  • Keyboard shortcuts doesn't work with iOS 6.1.3

    Since I've upgraded my iPhone 5 to iOS 6.1.3, my keybord's shortcuts doesn't work.
    Can you help me?Key

    HI boombadabum,
    I understand that you are having issues with keyboard shortcuts with a custom keyboard layout.
    I also understand that when you press the shortcuts that the menu blinks like it is working, but nothing actually happens.
    As a work around, you may be able to map them out with this add on[https://addons.mozilla.org/en-us/firefox/addon/customizable-shortcuts/]

  • Wifi doesn't work with IOS 7

    Hi, I installed on my iphone IOS 7 but now wifi doesn't work. It doesn't find any wifi connections around me. Please help me! What can I do?

    My wifi had no problem connecting to our home wifi prior to the IOS 7 update, but since updating this morning it's not working.  My phone will try to connect to wifi, but then I get the "Unable to join the network" message.  I tried resetting network settings, but that did not solve it.  I tried @bam11's suggestion of being in airplane mode first, but still no luck.  I've had my phone open to the Wi-Fi page, and saw it connect a couple times for the slightest second, but it disconnected just as fast.  My son as the exact same phone (4s) and he's connecting just fine!  Any other suggestions?  I'm afraid to hard reset my phone.

  • QuickTime 7 iPhone preset doesn't work with iOS 7

    Using the QuickTime Pro iPhone export preset doesn't seem to create movies that can be played in iOS 7.  When clicked on, you get the "no" play symbol.  The same movies can be played on an iPhone with iOS 6.
    Any workarounds out there?

    To Apple Discussions!
    "You should fix the problem soon in the QT 7.1.3 version."
    Apple Discussions are user to user message boards. Therefore, suggest that you report your concerns to QuickTime Feedback.
    Good luck!

  • Larrouse English-German doesn't work with IOS 7?

    After update to IOS 7.02 the Larrouse English-German do not work any more. It was working with early versions

    I reset my Motorola S11 Flex to factory settings and it works just fine now. To do that, make sure the head phones are off. Press the power button and multi-function button and the lady in the head phones will talk to you..the first option is to reset to factory settings. Do this and it will work. Hoped this helped

  • VPN over a TC doesn't work with iOS 4 or iPad OS 3.2.2

    MacBook, iPhone (1G, 3GS) and iPad are working fine with wifi and a Time Capsule. But there is a problem with newer OS (iOS 4, iPhone OS 3.2) and VPN (Cisco IPSec).
    The VPN-connection is established (symbol in title-bar), but no systems within the firewall are reachable. IPhone 1G with iPhone OS 3.1.2 and VPN is working fine. The iPad also did, before upgrading to OS 3.2.
    All systems do work fine with VPN via a Lancom access point. Seems that new OS won't work with an Apple Time Capsule any more. Update to 3.2.2 and 4.0.2 didn't help.
    Are there any special security settings that have to be configured in a Time Capsule to connect via VPN/IPSec?
    Thanks for any suggestions.

    {quote:title=Tesserax wrote:}Time Capsules are VPN "pass through" devices{quote}
    That's the way I expected they have to work. But it seems they do not. The VPN-data seems to be blocked by my Time Capsule. Is this behavior a bug?
    As written above: All my devices are working fast with Wi-Fi over my Time Capsule and without any problems when used without VPN. VPN works fine with all my devices via a LANCOM L-305 access point. VPN with first generation iPhone and OS 3.1 is also working fine via Time Capsule. iPad also did before upgrading to 3.2.
    With the newest software versions iPhone and iPad cannot exchange data through a VPN-tunnel when connected to my Time Capsule. Looks like some new security features have been introduced.
    Is there any document available, where a complete list of all changes from 3.1 to 3.2 can be found?

Maybe you are looking for