Composite Mode with X?

Hello,
the FCPX allow the Composite Mode function (like the FCP7 under Modify menu), to apply for example over two clip one on top of the other in the timeline (more or less like layers)?
If not ;-( is there any similar function or the same function with another name?
Thank you.

I´m not yet a FCPX user so I can only imagine what you´re explaining, but tell me if it´s this:
1.Two clips, one on top of the other, with the cursor line over them too.
2. One click on the "i" icon, with the clip on the top selected and we´ve access to the Composite Modes list?
3. Choose from that list and apply a Composite Mode over both clips (the first over the other in the vertical alignment)  like a "subtract" or a "multiply" mode?

Similar Messages

  • Composite mode transition

    Hi,
    When I use a transition (edge wipe in this case) between two clips with a different composite mode, something strange happens. I thought that the transition will mix the composite modes but it looks like it adds the composite modes.
    Is there any change of solving this problem or do I have to find a workaround?
    Martijn.
    PowerMac G5 DUAL 2.0   Mac OS X (10.4.4)   FCP 4.5

    Can i edit my posts in this forum?
    I looked again at the transition and I found that the transition only uses the composite mode of the first clip.
    Martijn.

  • Affecting Parameters in Composite mode

    I'm a new FC user so excuse my ignorance. I'm trying to affect the parameters of a video composite. With Avid I was able to affect each video layer and key frame between foreground and background, but in composite mode I can't seem to affect any of the parameters as you can with other video filters. Is there a type of "blending" filter that would work better?

    Not sure what you're trying to accomplish, but try double clicking one of the video layers and making adjustments in the Viewer.
    for instance if I was composting two identical video clips and using Composite Mode Add then I might launch my top video layer and adjust the Opacity in the Motion Tab

  • E72 problem to activate silent mode with 031.023

    now it is very difficult to activate silent mode with the ctrl key !

    I think this is not a bug, but a fix. In the previous FW it was TOO easy to switch to Silent mode and that would happen quite often by mistake (at least to me).
    So I think that Nokia corrected this problem, but did not communicate properly with their customers....
    2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Firefox plug in container has stopped working, even in safe mode with plug ins disabled

    My firefox keeps crashing every 5 - 10 minutes. Sometimes I get a windows error message saying "firefox plugin container stopped working", but most times I don't. These are the actions I've taken so far, with no effect:
    1. Updated all my plug-ins
    2. Run firefox in safe mode with plug-ins disabled
    3. Uninstalled and reinstalled firefox
    4. Run an AVG scan which turned up nothing
    Can anyone offer advice on how to fix this (very annoying) problem?
    I've had to write this in IE because firefox wouldn't stay open long enough for me to copy and paste it into the text box.

    Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

  • How can I get to DFU mode with a broken power button?

    How can I get to DFU mode with a broken power button?

    aarons84 wrote:
    This is bad, but i tried jailbraking my iphone
    You may as well stop there. We can't help you.

  • Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

    Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

    Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
    Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
    marek

  • Firefox 29 When I right click to open in a new tab, the tab will open but it will be a blank page. Tried Firefox Safe Mode & with Ad On Disabled Nothing

    When I right click to open in new tab, the new tab will open but the page is blank. I have tried it in Firefox Safe Mode & with Add Ons Disabled, still doesn't work.

    Hi UKBlue,
    Is your new tab page set to about:blank? You can change this from the about:config page or you can restore defaults by resetting Firefox.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Error when opening XLSX file with Excel 2003 SP3, file does open but in read only mode with temporary name

    I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed.  When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
    "Windows cannot find '<path to file>'.  Make sure you typed the name correctly, and then try again.  To search for a file, click the Start button, and then click Search."
    Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls".  The number seems to increment up each time it happens.
    Now here is the strange part.  If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
    I Googled the error I was getting and found KB211494.  It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case.  Any other ideas?  This is
    really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.

    This may be a file association problem.  To solve that:
    In Windows 7:
    1. Right-click the file,
    2. Select "Open With" 
    select [Your Program Here]
    3. Check always use this program. 
    In Windows XP:
    1. Locate the file as you have described above
    2. Right click the file
    3. Select Open with from the pop-up menu
    4. Click Choose default program…
    5. Select Excel in the Recommended Programs box
    6. Check Always use the selected program to open this kind of file
    7. Click on OK.
    1.  Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
    2. Take a registry backup using the steps given here
    3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
    4. Exit Registry Editor
    5. Undo Step 1 to make Excel available.
    6.  Restart the computer and verify it the issue is fixed.
    If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

  • My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

    My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

    What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

  • Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

    Hi,
    I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
    Using qtp in integrated mode worked previously on the solution manager 7.1 system.  Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
    I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
    Sincerely,
    David
    Edited by: David Snyman on Mar 2, 2012 7:38 AM

    Hi Sida,
    Can you check SapLogon.ini file maintaining below location please.
    let me know it resolve the isse, can you forward your details to <email removed by moderator>
    looking forward your response.
    Regards
    Naveen
    File Location
    Use
    C:\Windows\saplogon.ini
    Enable QTP to identify the Solution
      Manager Server
    C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
    Auto log on to SAP Systems for testing
    C:\SAP\FrontEnd\SAPgui\saplogon.ini
    Set Record and Run settings in QTP for
      64 Bit OS
    C:\Program Files
      (x86)\SAP\FrontEnd\SAPgui\saplogon.ini
    Set Record and Run settings in QTP for
      32 Bit OS
    Message was edited by: Manish Kumar

  • My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen.

    My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen after update os7 to os7.04
    My phone is completely disabled, what can i do ?

    Connect to iTunes. The phone is in Recovery mode. Follow the directions in this support document. http://support.apple.com/kb/HT1808

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.

    Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.

    Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.

Maybe you are looking for