Composite relationship in SAP XI

Hi all,
Does SAP XI supports composite relationship ?
plz anybody help me.
regards,
sekhar

Hi,
Do the Following,
1) Make sure that you deleted all the Files present in Source Directory
2)Select the Processing mode as Delete.
3)Now Place the File in the Source DIR path
4)See Whether the file got deleted from the Source or not.
5) Check the Sender CC in RWB
6) Check the SXMB_MONI to get the Success Flag.
7) Check the Receiver CC in RWB.
8) Check the Receiver Directory whether received the file or not.
Please check these one-by-one
Regards
Seshagiri

Similar Messages

The relationship between SAP BusinessObjects XI 4.0 and WebIntelligence 6

A lot of APIs in Rebean\ Report Engine Java SDK are disfunctional in BI 4.0 and there is no replacement.
[Rebean Developer Guide|http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_resdk_java_dg_en.pdf] say:
SAP BusinessObjects XI 4.0 release, the Report Engine SDK does not support the following features:
u2022 Drilling in Web Intelligence documents
u2022 Building queries
u2022 Document and report editing
in [BI 4.0 Javadoc|http://help.sap.com/javadocs/bip/40/re/en/com/businessobjects/rebean/wi/package-summary.html]
there are a lot of javadoc with warning Warning: This interface is no longer functional from the SAP BusinessObjects XI 4.0 release onwards
I found another [Java doc for WebIntelligence 6.x|http://help.sap.com/javadocs/boe/xi/re/en/overview-summary.html].
http://help.sap.com/javadocs/boe/xi/re/en/overview-summary.html
This documentation covers the REBean Java SDK. The REBean SDK allows you to work with ** documents and explore the metadata layer.
not supported by 4.x,but supported by 6.x?
what's the relationship between SAP BusinessObjects XI 4.0 and WebIntelligence 6.x?
What version of WebIntelligence used by SAP BusinessObjects XI 4.0 ?

Web Intelligence 6.x is an old product that is currently out of support.
Crystal Enterprise 10 and BusinessObjects 6.5 were the last separate Crystal / Web Intelligence products just after BusinessObjects acquired Crystal Decisions. BusinessObjects XI was the successor to both CE 10 and BO 6.5.
It just so happens that the product name was carried over from the BusinessObjects side, but the versioning brand was carried over from the Crystal side. So 6.x doesn't mean a newer version of ReportEngine. Timeline:
ReportEngine 6.x -> ReportEngine 11 (XI R1) -> ReportEngine 11.5 (XI R2) -> ReportEngine 12 (XI 3.x) -> ReportEngine 14 (BI 4.x).
So you can see the evolution of the branding that led to the newest version being branded by the number 4.0.
The internal APIs being wrapped by ReportEngine was changed from 12 to 14, and thus not all functionality was carried over to 14.
Sincerely,
Ted Ueda

Problem with Foreign Key relationships in SAP R/3 4.7

Hi Experts,
I am trying to create a foreign key relationship between 2 transparent tables in SAP R/3 4.7
Table 1:ZAAVNDR (MANDT (pk), VENDORNO (pk), NAME, REGION, COUNTRY (fk)) Foreign Key Table
Table 2: ZAAVNDRREF(MANDT(pk), COUNTRY (pk)) ---Check table
I have added few valid countries in check table but when I am adding some records in foreign key table with invalid countries these records are not being restricted and are still successfully going into the table.
Could any one please help in this.
Thanks in anticipation.
-Amit

Hi Sandra,
Many thanks for your response and providing time of yours.
Now, I have done exactly the same thing, but still it is the same.
I have created two new tables as below:
ZAAVREF (Check table)
MANDT (PK)
COUNTRY (PK) Domain:ZAACOUNT (CHAR 10)
ZAAV1 (Foreign key table)
MANDT (PK)
COUNTRY (PK) Domain:ZAACOUNT (CHAR 10)
Then I have created FK on country of foreign key table ZAAV1 and then SE16 (for table ZAAVREF)->Create Entries-> Entered values for Country only->Save....Records entered with valid Country values.
After that SE16 (for table ZAAV1)->Create Entries-->Entered an Invalid country->Save->Still the record entered to the Database successfully....
Could you please let me know where I am going wrong.
I am using SAP R/3 4.7 and creating tables using Tools->ABAP Workbench->Development->ABAP dictionary

Cannot Delete BP Relationships in SAP CRM 7.0 - intermittent error

Hi Everyone,
We are running SAP CRM 7.0, SP08. We are trying to delete just the relationship "Contact Person" between an Account and a Contact in CRM. Sometimes when we do it everything works just fine and the relationship is removed in CRM and the Contact Person is deleted in ECC. Other times we are getting the following error: "Address is still being used and may not be deleted." If we expand the error, we are getting the following:
Diagnosis
You tried to delete a BP address. This BP is still being used somewhere in the system, meaning that you are not permitted to delete this address.
System Response
Error message. The BP address is not deleted.
Procedure
Look at the where-used list for the BP address. If you still want to delete the address, change the reference to this address in the applications affected. In most cases, if applications other than maintenance of business partner itself are affected, you can navigate directly to the corresponding application from the where-used list (by calling the context menu with the right mouse button). You can then try again to delete the BP address.
Note
If a business partner is merely moving, you only need to change the actual address details. All references are automatically transferred to the new address.
We have tried several scenarios and have not found a consistent result. For example, we can create Activities in CRM, Quotes and Orders in ECC, using the Contact, and then when we remove the relationship it all works as we expected and removes the relationship in CRM and deletes them in ECC. However, for another Contact this does not work. It does not seem to matter if the person is the "main contact" in ECC or not, whether we have flagged them as the Main Contact in CRM or not, whether they have lots of transactions or none. The only thing that does seem to be consistant is where they were created and the relationship defined. It seems if they were created in ECC it does not work, but if they were created in CRM it does work.
I looked at SAP note 830239, but it does not apply to CRM 7.0.
Any help in this regard is appreciated. Thanks for your time.
Bryan

Hi,
We used the questionnaires (questionnaires was displayed and worked) but we faced issues with the display in web UI (only when the questionnaires are linked to an activity/opportunity). The Admin screen for questionnaire works well).
We have implemented the following notes in order to correct this displaying issues :
- 1858059 : Upload the CRM_SVY_GENERATE_BSP_TEMPLATE.ZIP, refresh cash and generate all surveys
And then notes mentioned above
- 1914885 & 1944288 in the relevant order.
But we cannot display anymore the existing surveys (They are active, all scenarios are flagged).
Error message : Cannot get questionnaire HTML string
Any Ideas how to proceed to solve ? (we work on EHP2)

Creating a Composite Provider in SAP BW 7.3 on HANA

Hi All,
We are currently on SAP BW 7.31 SP8 on HANA and would like to ask if you guys can provide some guides on how to create a simple Composite Provider in our current BW version.
I tried creating the object through RSLIMO / RSLIMOBW. But in the right panel of the screen which is supposed to show the list of available info providers is somehow disabled (see attached screenshot - error_CompositeInfo.jpg) and I couldn't choose any infoproviders to drag it to be used.
Any particular steps that needs to be carried out prior to this? Appreciate your help.
Thanks very much,
Jeffrey

Hi Prado,
Please refer the link for detailed steps:
http://scn.sap.com/docs/DOC-53352#__RefHeading__742_705700879
Thanks Much,
Abhishek

Relationship between SAP R/3 and XI

Hi
I have a question. What kindoff relationship exists between an R/3 system and XI system. Is it 1:1 or 1:many.
Lets say i have a requirement where i have one r/3 system and 3 EAI system. I want to generate an idoc or rfc from a single r/3 which has to go through all the 3 EAI systems. Is it possible. If so how do i achieve it.
If not why is it so.
I was having a debate on this with my colleague at my work-place and i would like to hear from you all as to what your opinion is about this.
regards
Sameer

Hi Sameer,
it is no problem to implement an n:m relationship between systems. For example, you can have one R/3 sending an material master IDoc, configure in the receiver determination that this IDoc should go to 3 different receivers, than define for each receiver the interface as expected by the receiver (of course you will have to implement the payload mappings) and than choose three different adapters for sending the messages.
regards, frank

How to setup the complex ownership relationship in SAP BPC

Hi Buddies,
I am new to SAP BPC. For legal consolidation, I am confused how to setup the ownership in BPC. The senario is following:
    P is the parent company, S1 and S2 are subsidiaries.
    1) P owned S1 80%, ownded S2 90%, meanwhile S1 owned P 20%
        How to setup this?
    2) P owned S1 80%, owned S2 70%, and S1 owned S2 10%.
        How to setup this?
For above 2 senarioes, how to calculate the Minority Interest? ( Using different consolidation rules?)
And if there are subgroup, how to see the subgroup result?
Thanks in advance.
Maggie Liu

Hi Will,
Thanks for reply... Actually, I've tried that before(putting comma after the flag "all," presuming the 71st step shows that I should have 3 members in the memberset under the ICDatasrc dimension. But it also did not work.
Nope, step 71 did not tell us to use piping and consequently expanding the col key range.
Thanks...
Dryan

Application Component - Enterprise Services in SAP Customer Relationship Management - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi,
It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
Best Regards,
Sigrid

Intellectual Property Management - Business Functions for SAP Customer Relationship Management - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi,
It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
Best Regards,
Sigrid

Utilities - Business Functions for SAP Customer Relationship Management - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi,
It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
Best Regards,
Sigrid

Create Cost Center relationship usin SAP-PD

Hi all,
SAP_PD is allowing to deal only with O, S and C object. How we can create new relationship to Cost Center (K) using SAP_PD.
Any ideas?
Thanks,
Oleg
Edited by: Oleg Sokolov on May 26, 2010 2:26 PM

You can 'start' an SAP_PD service with an Position, Job, or Org Unit. But you can update ANY relationship to that object (even cost center). Play around with it a bit and I'm sure you'll stumble up on the solution.
Derrick Banks
Banks & Company, LLC

Questions on composition and assosiation relationship

Which two are true about the composition relationship "A Blip consists of many
Blipverts."? (Choose two.)
A. A Blip must have at least two Blipverts.
B. A Blipvert can be a part of only one Blip.
C. A Blipvert must be part of at least one Blip.
D. When a Blipvert is deleted, its Blip should also be deleted.
E. When a Blip is deleted, each of its Blipverts should also be deleted. Answer: BE
according to me its answer shud be C and E. as composition says that one can not exsit without other..means blipvert can not exist without blip..hence it must be part of atleast one blip..
but actual answer given in book is B and E.
Can some one explain.
Question on Assosiation
Which is true about association navigation?
A. Association navigation is meaningful for only OO design, NOT implementation.
B. Association navigation is used to describe the relationship between a subclass and its superclass.
C. Association navigation indicates which direction a relationship can be traversed.
D. Association navigation indicates how many instances of each object type are involved in an association.
Answer should be C and D....D because we mention the how many instances can one have of other....example 0..1, 1..* etc etc...so D should also be an answer
but in book it is only C..
can someone explain this.
Am i wrong in my explanation?...
Thanks

(Choose two.)Choose none. This is not a homework answering site for your multiple-choice questions, that are only designed to elicit whether you have done the study they are about. Future posts of this nature will be deleted without notice. Locking this thread.

SAP PLM, ERP, PPM relationships

Hi PLM experts,
I have some questions about the SAP PLM products as below, would you share your insights? Thanks.
1. Most of PLM sub-modules are the functions of SAP ECC components as I see. So what's the relationship between SAP PLM and SAP ECC?
2. SAP PLM can be installed as an independent instance or as an integrated instance with SAP ECC as I read from document. Is it correct?
3. I read SAP PPM can be installed as an independent instance as well, what's PPM relationship to SAP PLM?
4. Most PLM user interface is using Web UI. Is it based ABAP webdynpro or Java webdynpro? Someone told me it's based on FPM framework in ABAP wedynpro. If you know, please share me your idea as well.
5. Any workflow function in SAP PLM? If user requires workflow to manage R&D process in SAP PLM, is it using similar ABAP workflow technology as in SAP ECC? Or java-based workflow as in BPM?
Appreciate your expert share.

Hi Justin,
see responses below:
1. Most of PLM sub-modules are the functions of SAP ECC components as I see. So what's the relationship between SAP PLM and SAP ECC?
SAP PLM capabilities are an integral part of SAP ECC, some are natively available like SAP GUI based BOM Management, Classification, Variant Configuration, Engineeering Change Management, etc., some , especially those in the PLM Web UI, need to be activated through Business Functions made available in various standard SAP ECC Enhancement Packages and partially licensed, like e.g. Engineering Record, Product Structure Synchronization, Access Control Management.
2. SAP PLM can be installed as an independent instance or as an integrated instance with SAP ECC as I read from document. Is it correct?
Yes.
3. I read SAP PPM can be installed as an independent instance as well, what's PPM relationship to SAP PLM?
SAP PPM is a a standalone product with its own license. It integrates into SAP ERP/PLM and other legacy and Business Suite solutions.
4. Most PLM user interface is using Web UI. Is it based ABAP webdynpro or Java webdynpro? Someone told me it's based on FPM framework in ABAP wedynpro. If you know, please share me your idea as well.
PLM Web UI is ABAP WebDynpro. And yes, it uses Floor Plan Manager.
5. Any workflow function in SAP PLM? If user requires workflow to manage R&D process in SAP PLM, is it using similar ABAP workflow technology as in SAP ECC? Or java-based workflow as in BPM?
SAP Business Workflow is leveraged in SAP PLM. Anyone can feel free to use SAP BPM as well, especially if workflows are crossing applications, and need to be orchestrated accordingly.
Hope this helps.
Ulf.

SAP Business Partner Person - Organization relationship

Hello All,
I am creating Person to Organization relationship in SAP BP category is BUR010 (employee of). I get the error called
'Maintenance is only possible via Organization Management'
Can some one help me?? I have also put myself in PPOMW (created a new test org. structure and put myuser ID in there).
Regards,
Naeem

Hello Naeem,
I normally create this relationship in the organizational model (old transaction PPOMA_CRM and also somewhere in the WebUI). There you can assign persons to organizational units. You normally do this to group your sales reps.
Best regards,
Thomas Wagner

Table Relationship's in SAP...

Hi All,
how to find relationship between sap tables.
like i want to relate MARA to VBAk..
can i get table mapping in SAP.
Thanks & Regads,
yunus

hi Yunus,
Check this LInk
http://www.sapgenie.com/abap/tables_sd.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.sapgenie.com/abap/tables.htm
Regards,
Santosh

Composite relationship in SAP XI

Similar Messages

Maybe you are looking for