Composite role not showing in Access request screen. (BRM not used)

Dear All
I have created a composite role in backend system with 2 single roles.
a. I have imported the single roles using the NWBC screen.
b. run the auth sync job.
c. imported the composite role as a techincal role using the NWBC import screen.
the import procedure was successfully completed.
But when i try to search for the role in Access request screen for a user - i can only see the single roles & not the composite roles?
Pls advise
Raju

Hi Raju,
In addition to Alessandro's valuable inputs, you need to be sure whether or not you were able to generate the composite roles (in NWBC).
The final stage of the composite role has to be in complete status.
Regards,
Ameet

Similar Messages

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

I just purchased Apple USB SuperDrive and connected to my Mac mini 2012 but does not show anything on the screen. Not sure if its working.

I just purchased Apple USB SuperDrive and connected to my Mac mini late 2012 USB slot but nothing shows up on the screen.
I have OS X versus 10.10.3

The system bus and all connected products should appear in the system profile or in the
hardware part of About this Mac (more info) and if that does not, restart the computer with
the external Apple USB SuperDrive plugged in. •As a last resort, if nothing else, before a
return trip to be rid of the SuperDrive, you could try a system management controller reset.
The SMC reset is not a first choice, so I won't post a link to the support instruction page.
A new Apple USB SuperDrive should be seen as hardware in system information report.
Of course, an icon of disc media should appear once the disc is inserted into the drive, too.
Good luck & happy computing!

Hi im new apple user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like .! What can be this issue n how to solve it??

hi im new apple ,ac book pro user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like though i can access web site n etc .! What can be this issue n how to solve it??

Hi,
If the machine is brand new I don't see why the serial Number is missing (it is entered on to a special chip at the factory)
However if the machine is a return and has been refurbished then the Logic/mother board may have been changed and someone forgot to put the info back to the new board.
for the Points
7:44 pm Thursday; January 16, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

System error - User not authorized to access requested Info Object!

Hi, Experts,
I have a user ID begin with S***, but when I click some links, the following message shows:
"System error - User not authorized to access requested Info Object!"
How could I have authorization to see these links?
Thanks!
Lorrie

Hi Lorrie,
If you are a superuser, you should not get this error.
If not, you can not change any autohorizations.
Check it out. For your job, you have to be a super user.
Thanks,
Gordon

HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :(

Yesterday I reset my settings on my iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

The message icon is not showing in the drop screen of my photos it used to show before and now it's not there how can I get it back?

The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?

Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.

Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black, when I try to synchronise my ipod to my library it comes up with a message saying "iTunes could not back up the ipod because a session could not be

Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!

Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406

HT5492 I had disabled my restrictions and my apps are not showing again in the screen!

Hi everyone!
please help me with my probleme
I had enabled my restrictions by accidant and some of my icons apps gone missing and if I wanted to open them I have to go to the app store, then I disabled my restrictions and they are still not showing on the home screen!
please if anyone know how to make them appear again pleeaaase tell me!

iPhone apps don't work on Macs and Mac apps don't run on iOS devices like an iPhone. If you sync an iPhone to a Mac, the apps from the iPhone are stored in the Mac's iTunes app's media library as a backup.
The App Store app on a Mac is not the same as the App Store app on the iPhone. The Mac version is the Mac App Store, apps for Macs. The iPhone version is the iTunes App Store, apps for iOS devices.

I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
Accepting that it works fine with another iPad, I suggest trying the following:
1. Restart the non-working iPad
2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
iTunes 10.3 is now available, and that may make a difference.

IOS 5 - Notification are not showing in the lock screen knowing that the option view in lock screen is active ?

Hi ,
After Upgade my iphone4 to ios 5 , Notifications are not showing in the lock screen knowing that the option view in lock screen is active ?
Regards
HM

I experience this also sometimes (whatsapp), is this a bug??
sometimes when a person writes 2-3 messages in a row (for instance) in whatsapp (im in standby mode), it sometimes only displayes ONE message in lock screen mode (though he/she wrote more than 1), and sometimes shows the right corresponding written messages!
Why is this?
its really annoyoing when you get messages in lock screen mode BUT it doesnt stay and remain so you notice it. That way you get missed messages etc and notices it first...when doing the "pull-down list".
FIX THIS

8Gb Touch 2nd gen problem. Only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem

I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
Any idea what I can do to fix this?

you can connect the iPod to iTunes in recovery mode:
Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes)

404 Not Found, Error: The requested resource does not exist.

Hi all,
When I try to access VC with the http://localhost:50400/vc where 04 is the CE1 instance, it returns the following error:
404 Not Found
Error: The requested resource does not exist.
Any clues. Just to add that the CE1 servers are running green and nwa is accessible on same url.
Regards.

Hi
Try with following link (VC should be in Caps) -
http://localhost:50400/VC/default.jsp
Also check whether you have proper admin roles assigned to your user id.
Regards
Sandeep
Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM

Photos loaded directly onto ipad air do not show up on PC anywhere when synced using itunes

Photos loaded directly onto ipad air using Apple camera connection kit, do not show up on PC anywhere when synced using itunes

They won't show in iTunes (iTunes is only used to copy photos to a device, not copy them off), but you should be able to copy them off either manually via My Computer (the iPad should show as a camera) or via windows camera wizard or windows live photo gallery depending upon your OS version.
Copying photos : iOS: Import personal photos and videos from iOS devices to your computer

Composite role not showing in Access request screen. (BRM not used)

Similar Messages

Maybe you are looking for