Compositing suspended on boot
When I start my computer compositing is not active.
I have to enable it by going to System Settings, Desktop Effects and then i have to press the Enable Compositing button.
Is there a way to enable this on boot?
I use KDE4.3, and the Catalyst Driver 9.10, 64 bit for a ATI Radeon HD4890.
grey wrote:That's weird - KDE should remember your settings. What happens when you start KDE via startx and then logout / login again? Are you settings also forgotten then, or only when you reboot?
When I do this, the settings are forgotten.
When I go to the desktop settings I get the following screen.
When I click on resume compositing, I get a message saying that a program disabled compositing and I can resume it.
Similar Messages
-
hey all,
this is yet another suspend problem, wondering if its anything trivial im doing wrong
simply suspend runs the scripts (as far as i can see) pretty well and seems to work, the screen turns off, some other hardware seem to shut down but essentially the system is still running at full power, which is my problem.
i've tried pm-suspend and the in built suspend button in xfce, all fail with the problems above
echo mem /sys/power/state is the same except the screen stays on with a blinking cursor in the corner
some other info:
/var/log/pm-suspend.log:
Initial commandline parameters: --quirk-dpms-suspend
--quirk-dpms-on
--quirk-vbestate-restore
--quirk-vbemode-restore
--quirk-vga-mode3
--quirk-vbe-post
Sun Mar 8 20:59:53 GMT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux sarin 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686 AMD Athlon(tm) 64 Processor 3700+ AuthenticAMD GNU/Linux
Module Size Used by
isofs 33700 1
zlib_inflate 19968 1 isofs
udf 82596 0
crc_itu_t 3840 1 udf
ipv6 260340 12
radeon 145824 2
drm 83880 3 radeon
agpgart 31572 1 drm
fuse 53020 4
joydev 11712 0
hid_logitech 11392 0
ff_memless 6792 1 hid_logitech
cx88_dvb 17668 0
cx88_vp3054_i2c 4352 1 cx88_dvb
mt352 8196 1 cx88_dvb
s5h1409 10500 1 cx88_dvb
dvb_pll 10632 1 cx88_dvb
s5h1411 11396 1 cx88_dvb
or51132 9988 1 cx88_dvb
cx24116 17032 1 cx88_dvb
nxt200x 14980 1 cx88_dvb
isl6421 3840 1 cx88_dvb
stb6000 5380 1 cx88_dvb
zl10353 9352 1 cx88_dvb
cx24123 15368 1 cx88_dvb
lgdt330x 10244 1 cx88_dvb
stv0299 11656 1 cx88_dvb
stv0288 9352 1 cx88_dvb
cx22702 7556 1 cx88_dvb
wm8775 7596 0
ppdev 9348 0
tuner 26692 0
tea5767 8580 1 tuner
tda8290 14468 1 tuner
tda18271 36360 1 tda8290
tda827x 11652 1 tda8290
tuner_xc2028 23600 2 cx88_dvb,tuner
xc5000 13192 2 cx88_dvb,tuner
tda9887 12164 2 cx88_dvb,tuner
tuner_simple 16144 2 cx88_dvb,tuner
tuner_types 16000 1 tuner_simple
mt20xx 14088 1 tuner
tea5761 6660 1 tuner
lp 11108 0
ppp_generic 25116 0
slhc 7552 1 ppp_generic
pcspkr 4352 0
psmouse 55828 0
cx88_alsa 12424 1
cx8802 16900 1 cx88_dvb
cx8800 31236 0
cx88xx 69800 4 cx88_dvb,cx88_alsa,cx8802,cx8800
compat_ioctl32 3072 1 cx8800
v4l2_common 13184 3 wm8775,tuner,cx8800
videodev 34176 3 tuner,cx8800,cx88xx
v4l1_compat 15364 1 videodev
ir_common 40452 1 cx88xx
i2c_algo_bit 7556 2 cx88_vp3054_i2c,cx88xx
tveeprom 13956 1 cx88xx
videobuf_dvb 8324 3 cx88_dvb,cx8802,cx88xx
dvb_core 81024 5 cx88_dvb,or51132,lgdt330x,stv0299,videobuf_dvb
btcx_risc 6408 4 cx88_alsa,cx8802,cx8800,cx88xx
videobuf_dma_sg 12932 5 cx88_dvb,cx88_alsa,cx8802,cx8800,cx88xx
videobuf_core 17668 5 cx8802,cx8800,cx88xx,videobuf_dvb,videobuf_dma_sg
serio_raw 7172 0
k8temp 6144 0
ohci1394 31280 0
ieee1394 79940 1 ohci1394
sg 26804 0
usb_storage 95552 0
ati_remote 11656 0
usbhid 36640 1 hid_logitech
hid 40704 2 hid_logitech,usbhid
parport_pc 37700 1
parport 33004 3 ppdev,lp,parport_pc
i2c_nforce2 8580 0
i2c_core 22804 33 cx88_vp3054_i2c,mt352,s5h1409,dvb_pll,s5h1411,or51132,cx24116,nxt200x,isl6421,stb6000,zl10353,cx24123,lgdt330x,stv0299,stv0288,cx22702,wm8775,tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,cx88xx,v4l2_common,i2c_algo_bit,tveeprom,i2c_nforce2
evdev 11296 6
thermal 17180 0
fan 6276 0
button 7824 0
battery 12036 0
ac 6020 0
snd_seq_oss 31872 0
snd_seq_midi_event 8192 1 snd_seq_oss
snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8204 2 snd_seq_oss,snd_seq
snd_intel8x0 30876 2
snd_ac97_codec 102308 1 snd_intel8x0
snd_pcm_oss 40192 0
snd_pcm 70020 4 cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 21384 2 snd_seq,snd_pcm
snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
snd_mixer_oss 16512 2 snd_pcm_oss
snd 50852 14 cx88_alsa,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 8160 2 snd
ac97_bus 3584 1 snd_ac97_codec
arc4 3712 2
ecb 4608 2
zd1211rw 46596 0
mac80211 161184 1 zd1211rw
cfg80211 31760 2 zd1211rw,mac80211
forcedeth 56592 0
cpufreq_ondemand 8972 1
powernow_k8 15364 0
freq_table 5632 2 cpufreq_ondemand,powernow_k8
processor 41388 2 thermal,powernow_k8
rtc_cmos 12332 0
rtc_core 17564 1 rtc_cmos
rtc_lib 4480 1 rtc_core
jfs 176364 1
sd_mod 26904 5
ohci_hcd 25360 0
ehci_hcd 36876 0
sr_mod 16708 1
cdrom 35360 1 sr_mod
usbcore 136848 7 usb_storage,ati_remote,usbhid,zd1211rw,ohci_hcd,ehci_hcd
sata_nv 24072 4
ata_generic 6788 0
pata_amd 12292 1
pata_acpi 6016 0
libata 157856 4 sata_nv,ata_generic,pata_amd,pata_acpi
scsi_mod 102164 5 sg,usb_storage,sd_mod,sr_mod,libata
total used free shared buffers cached
Mem: 1034812 815028 219784 0 66896 520532
-/+ buffers/cache: 227600 807212
Swap: 2096440 2832 2093608
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: /bin/stty: standard input: Invalid argument
:: ZoomWLAN down [BUSY] [DONE]
success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90chvt suspend suspend: success.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
Allocated buffer at 0x2010 (base is 0x0)
ES: 0x0201 EBX: 0x0000
success.
Sun Mar 8 20:59:54 GMT 2009: performing suspend
Hardware:
ASUS A8N-E
AMD Athlon64 3700+
ATI Radeon X1600 Pro (using radeon driver)
ZyDAS ZD1211 WLAN
Any ideas? kernel? acpi? If i need to provide any more information just ask
ThanksThe Supend to Disk page on the wiki is easy to follow, but I'll outline how I got it working just because.
First I had to install uswsusp and hibernate-script. You don't need to do anything with s2disk, but you need to configure hibernate properly to work with it. To do that was actually quite easy.
Edit the following files (in /etc/hibernate): blacklisted-modules, common.conf, disk.conf, hibernate.conf.
In blacklisted-modules, if you use nVidia, you'll need to comment out or delete the nvidia line. If you don't, you probably don't need to touch this file.
In common.conf I added a line that says "RestartServices network" (no quotes) under the "###services" section because after resuming I was unable to do anything online at first. This was the only edit.
In disk.conf just make sure the first uncommented line is "TryMethod ususpend-disk.conf". By default it should be listed first.
In hibernate.conf I commented out "TryMethod suspend2.conf", although I'm not sure this was necessary since I don't have TuxOnIce installed or configured. Other than this, make sure "TryMethod disk.conf" is listed first so hibernate knows to suspend to disk rather than RAM.
The other three files that need editing are /etc/suspend.conf, /boot/grub/menu.lst and /etc/mkinitcpio.conf.
In suspend.conf change the "resume device" line to point to your swap partition. I have "resume device = /dev/disk/by-uuid/91d8da0d-007e-42f1-bae3-d5f1741b5dd4" since I have 2 hard drives and occasionally they switch back and forth between sda and sdb, but if you have just one /dev/sdax works. You'll also point to this partition in menu.lst; on the "kernel" line make sure you add the option "resume=/dev/..." (where ... will be replaced with sdax or disk/by-uuid, or whatever method you prefer).
Finally, edit the last line in mkinitcpio.conf by adding "uresume" between "sata" and "filesystems".
After you've done all this run the command "mkinitcpio -p kernel26" as root and you should be set. A simple "sudo hibernate" (or just running "hibernate" as root) will do the job, and hopefully everything will work. I was surprised when it did, but pleased. -
Boot order of the SOA composites
Hi
Do we have any option to define the boot order of the SOA composites, during a server recycle.?
We are having issues in server during recycle. The dependent services are not brought up first, hence call to such not brought up services are failing.
The caller services are configured with MDS artifacts of the callee services, hence they can be brought up, even if the dependent services are not active.
Please suggest, if you have any options.Hi,
Do you use 11g? In that case the best thing to do is to put the abstract version of all the services into the MDS.
Than base all the ui-wsdl references and all the wsdl-imports on the reference to the abstract wsdl in the mds (eg. replace all the wsdl-references with an oramds:/apps/... reference to the path in the mds).
In service references in the composite you should keep the ws.binding attributes (location and port) referencing the concrete (deployed) values. These are used on runtime.
If you do so (which is I think best practice), then there is no dependency at startup, so the chronology of starting up does not matter. At startup time it will use the abstract (ui) versions of the wsdl's. Only on runtime the concrete ones. See for instance: http://www.albinsblog.com/2011/11/oracle-soa-suite-10g-to-11g-migration_06.html.
If you use SOASuite 10g, you could do about the same. But then you should put all the wsdl's in a subfolder in the htdocs folder of the apache server. Then in the bpel.xml you there are the wsdlLocation and the wsdlRuntimeLocation properties for the designtime (abstract) and the runtime version (concrete) of the wsdl.
Regards,
Martien -
Bluetooth mouse must be reinstalled every boot, suspend
I have an X200s running Windows 7 Professional 64. It has the OEM bluetooth adapter.
I like my Logitech V270 bluetooth mouse. I have used it in the past with an X60s (Windows XP SP3) and a T61 (Windows XP SP3) without any problems. I have never had to install any of Logitech's drivers to get the mouse to work, and I don't want extra drivers (nor the accompanying junk).
However, with the X200s running Windows 7, I have to reinstall the mouse every time I boot, suspend, or hibernate the laptop. It's incredibly frustrating.
I found the solution after an hour of agony. It's a bug with Lenovo's bluetooth drivers. If you use Microsoft's bluetooth drivers, this never happens.
(1) Make sure the bluetooth radio is turned on with the Fn+F5 radio manager.
(2) Open the Control Panel.
(3) Open System Properties. Select the "Hardware" tab and click "Device Installation Settings." Make sure "Yes, do this automatically" is selected. Save changes and close System Properties.
(4) Make sure you have internet access--Windows may need to download drivers.
(5) Open the Device Manager. Expand the list item named "Bluetooth Radios." Right-click each item and select uninstall. Once all Bluetooth devices have been uninstalled, click the menu item named "Action" and select "Scan for Hardware Changes."
(6) Windows will now install its own drivers for the Bluetooth adapter.
(7) Close the Device Manager and close the Control Panel.
At this point, my mouse just started working perfectly! However, you may need to add the device and pair it again.
www.wingedleopard.net/lucas || www.thinktankforums.comlucasreddinger wrote:
It's a bug with Lenovo's bluetooth drivers.
I have a V270 working fine with Win 7 Ultimate x64 on an X200 using the Lenovo BT drivers....
Cheers,
Bill
I don't work for Lenovo -
Lenovo Z585 Ubuntu 13.04 / Windows 8 Dual Boot Issue - Wake from Suspend?
As the title says. I have been having an issue with waking the screen on my laptop after going into suspend from Ubuntu 13.04. (Also, same problem on Ubuntu 12.10 and Fedora 18)
When I close the lid, the computer will go into standby normally. Lights go out, and power light just blinks. Upon opening the lid I get the lights on the computer to come back and the fans come back on, however the screen stays black.
I have the following:
Processor: AMD A10-4600M APU with Radeon HD Graphics x 4
Driver: Gallium 0.4 on AMD ARUBA
I have tried updating drivers through Ubuntu. I have tried modifying the backlight controls through editing the grub.
I have tried several re-installs of multiple versions of the listed Linux above.
No matter what I do, I have the same issue(s) on all three versions.
A seperate issue is a weak wifi signal using the installed Broadcom wifi antenna. Sitting next to the router I only get about 60% strength. If I plug in my Belkin USB wireless antenna I get 100%.
Any help would be great!
ThanksBump
-
hey has anybody had any luck being able to boot a beige g3 on the yellow video out plug? the reason its not shown in my macs is cauz its not mine. i dont have an older mac moniter to work with this thing. its got 10.2.6 and 9.1. i think it automacilty boots into OS X cauz it loads like mad forever. it has 192MB in it so yes i know prolly a little slow. its the 233MHz model
You need to have a monitor hooked up to the built-in Mac port to get a mirrored display out of the RCA/S-video output, and you have to select a resolution/mode compatible with NTSC or PAL equipment that you are using, in the Displays or Monitors Control Panel or Preference Pane. The NTSC/PAL modes might not be visible in the scrolling list of options, but if you scroll down you should be able to find them. (NTSC is common in USA)
If you don't have an old legacy Mac monitor, you can use any VGA monitor with an adapater like this one:
http://www.compusa.com/products/productinfo.asp?product_code=50050802&Pn=MAC_VGAAdapter
When I bought my G3 Desktop, some VGA monitors would come with a Mac adapter free, my first ViewSonic monitor came with one. -
Open ATI Drivers - Unable to initialise screen in normal boot
Hi,
I've been having a bunch of trouble with my graphics card since installing a Radeon HD 6900 card. Neither the Catalyst driver or the Xorg Open ATI driver currently work. I've abbandoned the Catalyst drivers as just unwilling to work with Gnome 3 or any other compositing WM. So i've started up a fresh install of Arch using the Xorg Open ATI drivers.
local/xf86-video-ati 1:6.14.6-1
local/xorg-server 1.12.2-1
What i'm finding is weird, the Open ATI drivers fail to load X as they have for quite some time (displaying a weird garbled screen that has elements of colour from the login screen but is mostly garbage, in the latest version I can actually see the tail of the mouse stuck at the top of the screen and moving it across to the far right gives me the bottom few pixels of the mouse repeated in vertical lines all over the rest of the screen). However if I boot into failsafe mode it appears to load X normally. From what I can tell of the Xorg.0.log for both sessions I think it's loading the Xorg drivers in both settings but I'm not sure.
Xorg.0.log From Failed Screen Mode Setting
[ 24.898]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 24.898] X Protocol Version 11, Revision 0
[ 24.898] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 24.898] Current Operating System: Linux nixon 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012 x86_64
[ 24.898] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 ro vga=794
[ 24.898] Build Date: 30 May 2012 07:24:13PM
[ 24.898]
[ 24.898] Current version of pixman: 0.26.2
[ 24.898] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.898] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.899] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 6 14:42:35 2012
[ 24.927] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.966] (==) No Layout section. Using the first Screen section.
[ 24.966] (==) No screen section available. Using defaults.
[ 24.966] (**) |-->Screen "Default Screen Section" (0)
[ 24.966] (**) | |-->Monitor "<default monitor>"
[ 24.966] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.966] (==) Automatically adding devices
[ 24.966] (==) Automatically enabling devices
[ 25.031] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 25.031] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 25.031] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.032] (II) Loader magic: 0x7c58e0
[ 25.032] (II) Module ABI versions:
[ 25.032] X.Org ANSI C Emulation: 0.4
[ 25.032] X.Org Video Driver: 12.0
[ 25.032] X.Org XInput driver : 16.0
[ 25.032] X.Org Server Extension : 6.0
[ 25.033] (--) PCI:*(0:1:0:0) 1002:6719:174b:186b rev 0, Mem @ 0xd0000000/268435456, 0xfdfc0000/131072, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
[ 25.033] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 25.033] (II) LoadModule: "extmod"
[ 25.035] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 25.045] (II) Module extmod: vendor="X.Org Foundation"
[ 25.045] compiled for 1.12.2, module version = 1.0.0
[ 25.045] Module class: X.Org Server Extension
[ 25.045] ABI class: X.Org Server Extension, version 6.0
[ 25.045] (II) Loading extension MIT-SCREEN-SAVER
[ 25.045] (II) Loading extension XFree86-VidModeExtension
[ 25.045] (II) Loading extension XFree86-DGA
[ 25.045] (II) Loading extension DPMS
[ 25.045] (II) Loading extension XVideo
[ 25.045] (II) Loading extension XVideo-MotionCompensation
[ 25.045] (II) Loading extension X-Resource
[ 25.045] (II) LoadModule: "dbe"
[ 25.046] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 25.056] (II) Module dbe: vendor="X.Org Foundation"
[ 25.056] compiled for 1.12.2, module version = 1.0.0
[ 25.056] Module class: X.Org Server Extension
[ 25.056] ABI class: X.Org Server Extension, version 6.0
[ 25.056] (II) Loading extension DOUBLE-BUFFER
[ 25.056] (II) LoadModule: "glx"
[ 25.056] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.070] (II) Module glx: vendor="X.Org Foundation"
[ 25.070] compiled for 1.12.2, module version = 1.0.0
[ 25.070] ABI class: X.Org Server Extension, version 6.0
[ 25.070] (==) AIGLX enabled
[ 25.071] (II) Loading extension GLX
[ 25.071] (II) LoadModule: "record"
[ 25.071] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 25.072] (II) Module record: vendor="X.Org Foundation"
[ 25.072] compiled for 1.12.2, module version = 1.13.0
[ 25.072] Module class: X.Org Server Extension
[ 25.072] ABI class: X.Org Server Extension, version 6.0
[ 25.072] (II) Loading extension RECORD
[ 25.072] (II) LoadModule: "dri"
[ 25.073] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 25.086] (II) Module dri: vendor="X.Org Foundation"
[ 25.086] compiled for 1.12.2, module version = 1.0.0
[ 25.086] ABI class: X.Org Server Extension, version 6.0
[ 25.086] (II) Loading extension XFree86-DRI
[ 25.086] (II) LoadModule: "dri2"
[ 25.087] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.087] (II) Module dri2: vendor="X.Org Foundation"
[ 25.087] compiled for 1.12.2, module version = 1.2.0
[ 25.087] ABI class: X.Org Server Extension, version 6.0
[ 25.087] (II) Loading extension DRI2
[ 25.088] (==) Matched ati as autoconfigured driver 0
[ 25.088] (==) Matched vesa as autoconfigured driver 1
[ 25.088] (==) Matched fbdev as autoconfigured driver 2
[ 25.088] (==) Assigned the driver to the xf86ConfigLayout
[ 25.088] (II) LoadModule: "ati"
[ 25.088] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 25.097] (II) Module ati: vendor="X.Org Foundation"
[ 25.097] compiled for 1.12.2, module version = 6.14.6
[ 25.097] Module class: X.Org Video Driver
[ 25.097] ABI class: X.Org Video Driver, version 12.0
[ 25.097] (II) LoadModule: "radeon"
[ 25.098] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 25.119] (II) Module radeon: vendor="X.Org Foundation"
[ 25.119] compiled for 1.12.2, module version = 6.14.6
[ 25.119] Module class: X.Org Video Driver
[ 25.119] ABI class: X.Org Video Driver, version 12.0
[ 25.120] (II) LoadModule: "vesa"
[ 25.120] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.131] (II) Module vesa: vendor="X.Org Foundation"
[ 25.131] compiled for 1.12.0, module version = 2.3.1
[ 25.131] Module class: X.Org Video Driver
[ 25.131] ABI class: X.Org Video Driver, version 12.0
[ 25.132] (II) LoadModule: "fbdev"
[ 25.132] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.133] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.133] compiled for 1.12.2, module version = 0.4.3
[ 25.133] Module class: X.Org Video Driver
[ 25.133] ABI class: X.Org Video Driver, version 12.0
[ 25.133] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA
[ 25.139] (II) VESA: driver for VESA chipsets: vesa
[ 25.139] (II) FBDEV: driver for framebuffer: fbdev
[ 25.139] (++) using VT number 7
[ 25.143] (II) [KMS] Kernel modesetting enabled.
[ 25.143] (WW) Falling back to old probe method for vesa
[ 25.143] (WW) Falling back to old probe method for fbdev
[ 25.143] (II) Loading sub module "fbdevhw"
[ 25.143] (II) LoadModule: "fbdevhw"
[ 25.143] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.148] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.148] compiled for 1.12.2, module version = 0.0.2
[ 25.148] ABI class: X.Org Video Driver, version 12.0
[ 25.148] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 25.148] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 25.148] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 25.148] (==) RADEON(0): Default visual is TrueColor
[ 25.148] (==) RADEON(0): RGB weight 888
[ 25.148] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 25.148] (--) RADEON(0): Chipset: "AMD Radeon HD 6900 Series" (ChipID = 0x6719)
[ 25.148] (II) RADEON(0): PCIE card detected
[ 25.148] drmOpenDevice: node name is /dev/dri/card0
[ 25.148] drmOpenDevice: open result is 8, (OK)
[ 25.148] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 25.148] drmOpenDevice: node name is /dev/dri/card0
[ 25.148] drmOpenDevice: open result is 8, (OK)
[ 25.148] drmOpenByBusid: drmOpenMinor returns 8
[ 25.148] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 25.148] (II) Loading sub module "exa"
[ 25.148] (II) LoadModule: "exa"
[ 25.149] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 25.149] (II) Module exa: vendor="X.Org Foundation"
[ 25.149] compiled for 1.12.2, module version = 2.5.0
[ 25.149] ABI class: X.Org Video Driver, version 12.0
[ 25.150] (II) RADEON(0): KMS Color Tiling: enabled
[ 25.150] (II) RADEON(0): KMS Pageflipping: enabled
[ 25.150] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 25.163] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 25.165] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 25.168] (II) RADEON(0): Output DVI-0 has no monitor section
[ 25.199] (II) RADEON(0): Output DVI-1 has no monitor section
[ 25.210] (II) RADEON(0): EDID for output DisplayPort-0
[ 25.212] (II) RADEON(0): EDID for output HDMI-0
[ 25.214] (II) RADEON(0): EDID for output DVI-0
[ 25.246] (II) RADEON(0): EDID for output DVI-1
[ 25.246] (II) RADEON(0): Manufacturer: NUL Model: 1 Serial#: 1
[ 25.246] (II) RADEON(0): Year: 2002 Week: 32
[ 25.246] (II) RADEON(0): EDID Version: 1.3
[ 25.246] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 25.246] (II) RADEON(0): Sync: Separate
[ 25.246] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 25.246] (II) RADEON(0): Gamma: 1.00
[ 25.246] (II) RADEON(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
[ 25.246] (II) RADEON(0): First detailed timing is preferred mode
[ 25.246] (II) RADEON(0): redX: 0.609 redY: 0.352 greenX: 0.303 greenY: 0.550
[ 25.246] (II) RADEON(0): blueX: 0.148 blueY: 0.128 whiteX: 0.305 whiteY: 0.342
[ 25.246] (II) RADEON(0): Supported established timings:
[ 25.246] (II) RADEON(0): 720x400@70Hz
[ 25.246] (II) RADEON(0): 640x480@60Hz
[ 25.246] (II) RADEON(0): 640x480@72Hz
[ 25.246] (II) RADEON(0): 640x480@75Hz
[ 25.246] (II) RADEON(0): 800x600@56Hz
[ 25.246] (II) RADEON(0): 800x600@60Hz
[ 25.246] (II) RADEON(0): 800x600@72Hz
[ 25.246] (II) RADEON(0): 800x600@75Hz
[ 25.246] (II) RADEON(0): 1024x768@60Hz
[ 25.246] (II) RADEON(0): 1024x768@70Hz
[ 25.246] (II) RADEON(0): 1024x768@75Hz
[ 25.246] (II) RADEON(0): 1280x1024@75Hz
[ 25.246] (II) RADEON(0): Manufacturer's mask: 0
[ 25.246] (II) RADEON(0): Supported standard timings:
[ 25.246] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 25.246] (II) RADEON(0): Supported detailed timing:
[ 25.246] (II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 25.246] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 25.246] (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 25.246] (II) RADEON(0):
[ 25.246] (II) RADEON(0):
[ 25.246] (II) RADEON(0): Monitor name:
[ 25.246] (II) RADEON(0): EDID (in hex):
[ 25.246] (II) RADEON(0): 00ffffffffffff003aac010001000000
[ 25.246] (II) RADEON(0): 200c010308221b00ca0b329c5a4d8c26
[ 25.246] (II) RADEON(0): 204e57afcf0081800101010101010101
[ 25.246] (II) RADEON(0): 010101010101302a009851002a403070
[ 25.246] (II) RADEON(0): 1300520e1100001e000000fe000a2020
[ 25.246] (II) RADEON(0): 20202020202020202020000000fe000a
[ 25.246] (II) RADEON(0): 202020202020202020202020000000fc
[ 25.246] (II) RADEON(0): 000a20202020202020202020202000d6
[ 25.246] (II) RADEON(0): Printing probed modes for output DVI-1
[ 25.246] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 25.246] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 25.246] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 25.246] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 25.246] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 25.246] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 25.246] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 25.246] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 25.246] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 25.246] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 25.246] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 25.246] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 25.246] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 25.246] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 25.246] (II) RADEON(0): Output HDMI-0 disconnected
[ 25.246] (II) RADEON(0): Output DVI-0 disconnected
[ 25.246] (II) RADEON(0): Output DVI-1 connected
[ 25.246] (II) RADEON(0): Using exact sizes for initial modes
[ 25.246] (II) RADEON(0): Output DVI-1 using initial mode 1280x1024
[ 25.246] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.246] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:80000000 visible:fac0000
[ 25.246] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 25.246] (==) RADEON(0): DPI set to (96, 96)
[ 25.246] (II) Loading sub module "fb"
[ 25.246] (II) LoadModule: "fb"
[ 25.246] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.257] (II) Module fb: vendor="X.Org Foundation"
[ 25.258] compiled for 1.12.2, module version = 1.0.0
[ 25.258] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.258] (II) Loading sub module "ramdac"
[ 25.258] (II) LoadModule: "ramdac"
[ 25.258] (II) Module "ramdac" already built-in
[ 25.258] (II) UnloadModule: "vesa"
[ 25.258] (II) Unloading vesa
[ 25.258] (II) UnloadModule: "fbdev"
[ 25.258] (II) Unloading fbdev
[ 25.258] (II) UnloadSubModule: "fbdevhw"
[ 25.258] (II) Unloading fbdevhw
[ 25.258] (--) Depth 24 pixmap format is 32 bpp
[ 25.265] (II) RADEON(0): [DRI2] Setup complete
[ 25.265] (II) RADEON(0): [DRI2] DRI driver: r600
[ 25.265] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 25.265] (II) RADEON(0): Front buffer size: 5120K
[ 25.265] (II) RADEON(0): VRAM usage limit set to 226483K
[ 25.267] (==) RADEON(0): Backing store disabled
[ 25.267] (II) RADEON(0): Direct rendering enabled
[ 25.268] (II) RADEON(0): Setting EXA maxPitchBytes
[ 25.268] (II) EXA(0): Driver allocated offscreen pixmaps
[ 25.268] (II) EXA(0): Driver registered support for the following operations:
[ 25.268] (II) Solid
[ 25.268] (II) Copy
[ 25.268] (II) Composite (RENDER acceleration)
[ 25.268] (II) UploadToScreen
[ 25.268] (II) DownloadFromScreen
[ 25.268] (II) RADEON(0): Acceleration enabled
[ 25.268] (==) RADEON(0): DPMS enabled
[ 25.268] (==) RADEON(0): Silken mouse enabled
[ 25.279] (II) RADEON(0): Set up textured video
[ 25.279] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 25.279] (II) RADEON(0): [XvMC] Extension initialized.
[ 25.279] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.279] (--) RandR disabled
[ 25.279] (II) Initializing built-in extension Generic Event Extension
[ 25.279] (II) Initializing built-in extension SHAPE
[ 25.279] (II) Initializing built-in extension MIT-SHM
[ 25.279] (II) Initializing built-in extension XInputExtension
[ 25.279] (II) Initializing built-in extension XTEST
[ 25.279] (II) Initializing built-in extension BIG-REQUESTS
[ 25.279] (II) Initializing built-in extension SYNC
[ 25.279] (II) Initializing built-in extension XKEYBOARD
[ 25.279] (II) Initializing built-in extension XC-MISC
[ 25.279] (II) Initializing built-in extension SECURITY
[ 25.279] (II) Initializing built-in extension XINERAMA
[ 25.280] (II) Initializing built-in extension XFIXES
[ 25.280] (II) Initializing built-in extension RENDER
[ 25.280] (II) Initializing built-in extension RANDR
[ 25.280] (II) Initializing built-in extension COMPOSITE
[ 25.280] (II) Initializing built-in extension DAMAGE
[ 25.716] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 25.716] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 25.716] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 25.716] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 25.718] (II) AIGLX: Loaded and initialized r600
[ 25.718] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.764] (II) RADEON(0): Setting screen physical size to 338 x 270
[ 26.178] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 26.178] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.178] (II) LoadModule: "evdev"
[ 26.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.206] (II) Module evdev: vendor="X.Org Foundation"
[ 26.206] compiled for 1.12.0, module version = 2.7.0
[ 26.206] Module class: X.Org XInput Driver
[ 26.206] ABI class: X.Org XInput driver, version 16.0
[ 26.206] (II) Using input driver 'evdev' for 'Power Button'
[ 26.206] (**) Power Button: always reports core events
[ 26.206] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 26.206] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.206] (--) evdev: Power Button: Found keys
[ 26.206] (II) evdev: Power Button: Configuring as keyboard
[ 26.206] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 26.206] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.206] (**) Option "xkb_rules" "evdev"
[ 26.206] (**) Option "xkb_model" "evdev"
[ 26.206] (**) Option "xkb_layout" "us"
[ 26.239] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 26.239] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.239] (II) Using input driver 'evdev' for 'Power Button'
[ 26.239] (**) Power Button: always reports core events
[ 26.239] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 26.239] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.239] (--) evdev: Power Button: Found keys
[ 26.239] (II) evdev: Power Button: Configuring as keyboard
[ 26.239] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 26.239] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 26.239] (**) Option "xkb_rules" "evdev"
[ 26.239] (**) Option "xkb_model" "evdev"
[ 26.239] (**) Option "xkb_layout" "us"
[ 26.240] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event15)
[ 26.240] (II) No input driver specified, ignoring this device.
[ 26.241] (II) This device may have been added with another device file.
[ 26.241] (II) config/udev: Adding input device B16_b_02 USB-PS/2 Optical Mouse (/dev/input/event0)
[ 26.241] (**) B16_b_02 USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 26.241] (II) Using input driver 'evdev' for 'B16_b_02 USB-PS/2 Optical Mouse'
[ 26.241] (**) B16_b_02 USB-PS/2 Optical Mouse: always reports core events
[ 26.241] (**) evdev: B16_b_02 USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
[ 26.241] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc025
[ 26.241] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 26.241] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 26.241] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Found relative axes
[ 26.241] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Found x and y relative axes
[ 26.242] (II) evdev: B16_b_02 USB-PS/2 Optical Mouse: Configuring as mouse
[ 26.242] (II) evdev: B16_b_02 USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 26.242] (**) evdev: B16_b_02 USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 26.242] (**) evdev: B16_b_02 USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input0/event0"
[ 26.242] (II) XINPUT: Adding extended input device "B16_b_02 USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 26.242] (II) evdev: B16_b_02 USB-PS/2 Optical Mouse: initialized for relative axes.
[ 26.242] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 26.242] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 26.243] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 26.243] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 26.243] (II) config/udev: Adding input device B16_b_02 USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 26.243] (II) No input driver specified, ignoring this device.
[ 26.243] (II) This device may have been added with another device file.
[ 26.244] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 26.244] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.244] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 26.244] (**) Logitech USB Keyboard: always reports core events
[ 26.244] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 26.244] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31d
[ 26.244] (--) evdev: Logitech USB Keyboard: Found keys
[ 26.244] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 26.244] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input1/event1"
[ 26.244] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 26.244] (**) Option "xkb_rules" "evdev"
[ 26.244] (**) Option "xkb_model" "evdev"
[ 26.244] (**) Option "xkb_layout" "us"
[ 26.245] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[ 26.246] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.246] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 26.246] (**) Logitech USB Keyboard: always reports core events
[ 26.246] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event2"
[ 26.246] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31d
[ 26.246] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 26.246] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 26.246] (--) evdev: Logitech USB Keyboard: Found keys
[ 26.246] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 26.246] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 26.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input2/event2"
[ 26.246] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 26.246] (**) Option "xkb_rules" "evdev"
[ 26.246] (**) Option "xkb_model" "evdev"
[ 26.246] (**) Option "xkb_layout" "us"
[ 26.246] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 26.246] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 26.246] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 26.246] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 26.246] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 26.246] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 26.246] (II) No input driver specified, ignoring this device.
[ 26.247] (II) This device may have been added with another device file.
[ 26.247] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event10)
[ 26.247] (II) No input driver specified, ignoring this device.
[ 26.247] (II) This device may have been added with another device file.
[ 26.247] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event11)
[ 26.247] (II) No input driver specified, ignoring this device.
[ 26.247] (II) This device may have been added with another device file.
[ 26.247] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
[ 26.247] (II) No input driver specified, ignoring this device.
[ 26.247] (II) This device may have been added with another device file.
[ 26.247] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event13)
[ 26.247] (II) No input driver specified, ignoring this device.
[ 26.247] (II) This device may have been added with another device file.
[ 26.247] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event14)
[ 26.247] (II) No input driver specified, ignoring this device.
[ 26.247] (II) This device may have been added with another device file.
[ 26.247] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
[ 26.247] (II) No input driver specified, ignoring this device.
[ 26.247] (II) This device may have been added with another device file.
[ 26.247] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
[ 26.247] (II) No input driver specified, ignoring this device.
[ 26.247] (II) This device may have been added with another device file.
[ 26.248] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event9)
[ 26.248] (II) No input driver specified, ignoring this device.
[ 26.248] (II) This device may have been added with another device file.
[ 26.248] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 26.248] (II) No input driver specified, ignoring this device.
[ 26.248] (II) This device may have been added with another device file.
[ 26.309] (II) RADEON(0): EDID vendor "NUL", prod id 1
[ 26.309] (II) RADEON(0): Printing DDC gathered Modelines:
[ 26.309] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 26.309] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.309] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.309] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 26.309] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 26.309] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.309] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 26.309] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 26.309] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 26.309] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 26.309] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.309] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 26.309] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 31.686] (II) RADEON(0): EDID vendor "NUL", prod id 1
[ 31.686] (II) RADEON(0): Printing DDC gathered Modelines:
[ 31.686] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 31.686] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 31.686] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 31.686] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 31.686] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 31.686] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 31.686] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 31.686] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 31.686] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 31.686] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 31.686] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 31.686] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 31.686] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 57.574] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 78.281] (II) evdev: Logitech USB Keyboard: Close
[ 78.281] (II) UnloadModule: "evdev"
[ 78.281] (II) evdev: Logitech USB Keyboard: Close
[ 78.281] (II) UnloadModule: "evdev"
[ 78.281] (II) evdev: B16_b_02 USB-PS/2 Optical Mouse: Close
[ 78.281] (II) UnloadModule: "evdev"
[ 78.281] (II) evdev: Power Button: Close
[ 78.281] (II) UnloadModule: "evdev"
[ 78.281] (II) evdev: Power Button: Close
[ 78.281] (II) UnloadModule: "evdev"
[ 78.284] Server terminated successfully (0). Closing log file.
Xorg.0.log From Successful Screen Mode Setting
[ 24.765]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 24.765] X Protocol Version 11, Revision 0
[ 24.765] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 24.765] Current Operating System: Linux nixon 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012 x86_64
[ 24.765] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 ro
[ 24.765] Build Date: 30 May 2012 07:24:13PM
[ 24.765]
[ 24.765] Current version of pixman: 0.26.2
[ 24.765] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.765] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.766] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 6 14:47:41 2012
[ 24.794] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.833] (==) No Layout section. Using the first Screen section.
[ 24.833] (==) No screen section available. Using defaults.
[ 24.833] (**) |-->Screen "Default Screen Section" (0)
[ 24.833] (**) | |-->Monitor "<default monitor>"
[ 24.833] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.833] (==) Automatically adding devices
[ 24.833] (==) Automatically enabling devices
[ 24.899] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 24.899] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.899] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.899] (II) Loader magic: 0x7c58e0
[ 24.899] (II) Module ABI versions:
[ 24.899] X.Org ANSI C Emulation: 0.4
[ 24.899] X.Org Video Driver: 12.0
[ 24.899] X.Org XInput driver : 16.0
[ 24.899] X.Org Server Extension : 6.0
[ 24.900] (--) PCI:*(0:1:0:0) 1002:6719:174b:186b rev 0, Mem @ 0xd0000000/268435456, 0xfdfc0000/131072, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
[ 24.900] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.900] (II) LoadModule: "extmod"
[ 24.902] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 24.912] (II) Module extmod: vendor="X.Org Foundation"
[ 24.912] compiled for 1.12.2, module version = 1.0.0
[ 24.912] Module class: X.Org Server Extension
[ 24.912] ABI class: X.Org Server Extension, version 6.0
[ 24.912] (II) Loading extension MIT-SCREEN-SAVER
[ 24.912] (II) Loading extension XFree86-VidModeExtension
[ 24.913] (II) Loading extension XFree86-DGA
[ 24.913] (II) Loading extension DPMS
[ 24.913] (II) Loading extension XVideo
[ 24.913] (II) Loading extension XVideo-MotionCompensation
[ 24.913] (II) Loading extension X-Resource
[ 24.913] (II) LoadModule: "dbe"
[ 24.913] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 24.923] (II) Module dbe: vendor="X.Org Foundation"
[ 24.923] compiled for 1.12.2, module version = 1.0.0
[ 24.923] Module class: X.Org Server Extension
[ 24.923] ABI class: X.Org Server Extension, version 6.0
[ 24.923] (II) Loading extension DOUBLE-BUFFER
[ 24.923] (II) LoadModule: "glx"
[ 24.923] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.937] (II) Module glx: vendor="X.Org Foundation"
[ 24.937] compiled for 1.12.2, module version = 1.0.0
[ 24.937] ABI class: X.Org Server Extension, version 6.0
[ 24.937] (==) AIGLX enabled
[ 24.938] (II) Loading extension GLX
[ 24.938] (II) LoadModule: "record"
[ 24.938] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.939] (II) Module record: vendor="X.Org Foundation"
[ 24.939] compiled for 1.12.2, module version = 1.13.0
[ 24.939] Module class: X.Org Server Extension
[ 24.939] ABI class: X.Org Server Extension, version 6.0
[ 24.939] (II) Loading extension RECORD
[ 24.939] (II) LoadModule: "dri"
[ 24.940] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.953] (II) Module dri: vendor="X.Org Foundation"
[ 24.953] compiled for 1.12.2, module version = 1.0.0
[ 24.953] ABI class: X.Org Server Extension, version 6.0
[ 24.953] (II) Loading extension XFree86-DRI
[ 24.953] (II) LoadModule: "dri2"
[ 24.954] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.954] (II) Module dri2: vendor="X.Org Foundation"
[ 24.954] compiled for 1.12.2, module version = 1.2.0
[ 24.954] ABI class: X.Org Server Extension, version 6.0
[ 24.954] (II) Loading extension DRI2
[ 24.955] (==) Matched ati as autoconfigured driver 0
[ 24.955] (==) Matched vesa as autoconfigured driver 1
[ 24.955] (==) Matched fbdev as autoconfigured driver 2
[ 24.955] (==) Assigned the driver to the xf86ConfigLayout
[ 24.955] (II) LoadModule: "ati"
[ 24.955] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 24.964] (II) Module ati: vendor="X.Org Foundation"
[ 24.964] compiled for 1.12.2, module version = 6.14.6
[ 24.964] Module class: X.Org Video Driver
[ 24.964] ABI class: X.Org Video Driver, version 12.0
[ 24.964] (II) LoadModule: "radeon"
[ 24.965] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 24.986] (II) Module radeon: vendor="X.Org Foundation"
[ 24.986] compiled for 1.12.2, module version = 6.14.6
[ 24.986] Module class: X.Org Video Driver
[ 24.986] ABI class: X.Org Video Driver, version 12.0
[ 24.987] (II) LoadModule: "vesa"
[ 24.987] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.999] (II) Module vesa: vendor="X.Org Foundation"
[ 24.999] compiled for 1.12.0, module version = 2.3.1
[ 24.999] Module class: X.Org Video Driver
[ 24.999] ABI class: X.Org Video Driver, version 12.0
[ 24.999] (II) LoadModule: "fbdev"
[ 24.999] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.000] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.000] compiled for 1.12.2, module version = 0.4.3
[ 25.000] Module class: X.Org Video Driver
[ 25.000] ABI class: X.Org Video Driver, version 12.0
[ 25.000] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA
[ 25.008] (II) VESA: driver for VESA chipsets: vesa
[ 25.008] (II) FBDEV: driver for framebuffer: fbdev
[ 25.008] (++) using VT number 7
[ 25.012] (II) [KMS] Kernel modesetting enabled.
[ 25.012] (WW) Falling back to old probe method for vesa
[ 25.012] (WW) Falling back to old probe method for fbdev
[ 25.012] (II) Loading sub module "fbdevhw"
[ 25.012] (II) LoadModule: "fbdevhw"
[ 25.013] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.015] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.015] compiled for 1.12.2, module version = 0.0.2
[ 25.015] ABI class: X.Org Video Driver, version 12.0
[ 25.015] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 25.015] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 25.015] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 25.015] (==) RADEON(0): Default visual is TrueColor
[ 25.015] (==) RADEON(0): RGB weight 888
[ 25.015] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 25.015] (--) RADEON(0): Chipset: "AMD Radeon HD 6900 Series" (ChipID = 0x6719)
[ 25.015] (II) RADEON(0): PCIE card detected
[ 25.015] drmOpenDevice: node name is /dev/dri/card0
[ 25.015] drmOpenDevice: open result is 8, (OK)
[ 25.015] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 25.015] drmOpenDevice: node name is /dev/dri/card0
[ 25.015] drmOpenDevice: open result is 8, (OK)
[ 25.015] drmOpenByBusid: drmOpenMinor returns 8
[ 25.015] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 25.015] (II) Loading sub module "exa"
[ 25.015] (II) LoadModule: "exa"
[ 25.016] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 25.024] (II) Module exa: vendor="X.Org Foundation"
[ 25.024] compiled for 1.12.2, module version = 2.5.0
[ 25.024] ABI class: X.Org Video Driver, version 12.0
[ 25.025] (II) RADEON(0): KMS Color Tiling: enabled
[ 25.025] (II) RADEON(0): KMS Pageflipping: enabled
[ 25.025] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 25.036] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 25.039] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 25.041] (II) RADEON(0): Output DVIAs far as I understand, any VGA= option conflicts with kernel modesetting (KMS). Further information can be found here:
https://wiki.archlinux.org/index.php/At … _.28KMS.29 -
On boot, xrandr does not use the preferred resolution anymore
Hello,
I run ArchLInux on my ThinkPad T420 at work. When I am at my Desktop, I use it in double screen, with the laptop screen (LVDS1 for xrandr) and the HDMI output on larger LCD screen (HDMI1 for xrandr).
At least in that working state, I don't use the screens side by side (In fact I close the lid, usually), so it's just in "clone" mode (but with different resolutions...).
Since about one month, When I boot, X doesn't start anymore with the expected resolutions ("preferred", for xrandr). When setting them by and, it works, but nothing automatic... And it's only at (cold) boot; after a suspend-to-disk, it resumes on the correct (former) resolution. I also think that it works fine if I boot with the HDMI cable unplugged (and plug it after X launch and call xrandr --auto).
I don't have anything in /etc/X11/xorg.conf.d/, only the basic default files, only tdealing with inputs (mouse, touch pad, etc). So I don't really where to start from.
Here X's output for today :
[ 390.509]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 390.509] X Protocol Version 11, Revision 0
[ 390.509] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 390.509] Current Operating System: Linux tperson 3.8.7-1-ARCH #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013 x86_64
[ 390.509] Kernel command line: root=/dev/sda5 resume=/dev/sda6 ro
[ 390.509] Build Date: 17 April 2013 02:37:06PM
[ 390.509]
[ 390.509] Current version of pixman: 0.28.2
[ 390.509] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 390.509] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 390.509] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 22 10:12:06 2013
[ 390.619] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 390.642] (==) No Layout section. Using the first Screen section.
[ 390.642] (==) No screen section available. Using defaults.
[ 390.642] (**) |-->Screen "Default Screen Section" (0)
[ 390.642] (**) | |-->Monitor "<default monitor>"
[ 390.642] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 390.643] (==) Automatically adding devices
[ 390.643] (==) Automatically enabling devices
[ 390.643] (==) Automatically adding GPU devices
[ 390.807] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 390.807] Entry deleted from font path.
[ 390.878] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 390.878] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 390.878] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 390.878] (II) Loader magic: 0x7fcc20
[ 390.878] (II) Module ABI versions:
[ 390.878] X.Org ANSI C Emulation: 0.4
[ 390.878] X.Org Video Driver: 14.1
[ 390.878] X.Org XInput driver : 19.1
[ 390.878] X.Org Server Extension : 7.0
[ 390.879] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 390.882] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 390.883] Initializing built-in extension Generic Event Extension
[ 390.883] Initializing built-in extension SHAPE
[ 390.883] Initializing built-in extension MIT-SHM
[ 390.883] Initializing built-in extension XInputExtension
[ 390.883] Initializing built-in extension XTEST
[ 390.883] Initializing built-in extension BIG-REQUESTS
[ 390.883] Initializing built-in extension SYNC
[ 390.883] Initializing built-in extension XKEYBOARD
[ 390.883] Initializing built-in extension XC-MISC
[ 390.883] Initializing built-in extension SECURITY
[ 390.884] Initializing built-in extension XINERAMA
[ 390.884] Initializing built-in extension XFIXES
[ 390.884] Initializing built-in extension RENDER
[ 390.884] Initializing built-in extension RANDR
[ 390.884] Initializing built-in extension COMPOSITE
[ 390.884] Initializing built-in extension DAMAGE
[ 390.884] Initializing built-in extension MIT-SCREEN-SAVER
[ 390.884] Initializing built-in extension DOUBLE-BUFFER
[ 390.884] Initializing built-in extension RECORD
[ 390.884] Initializing built-in extension DPMS
[ 390.884] Initializing built-in extension X-Resource
[ 390.884] Initializing built-in extension XVideo
[ 390.885] Initializing built-in extension XVideo-MotionCompensation
[ 390.885] Initializing built-in extension XFree86-VidModeExtension
[ 390.885] Initializing built-in extension XFree86-DGA
[ 390.885] Initializing built-in extension XFree86-DRI
[ 390.885] Initializing built-in extension DRI2
[ 390.885] (II) LoadModule: "glx"
[ 390.893] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 390.921] (II) Module glx: vendor="X.Org Foundation"
[ 390.921] compiled for 1.14.1, module version = 1.0.0
[ 390.921] ABI class: X.Org Server Extension, version 7.0
[ 390.922] (==) AIGLX enabled
[ 390.934] Loading extension GLX
[ 390.934] (==) Matched intel as autoconfigured driver 0
[ 390.934] (==) Matched intel as autoconfigured driver 1
[ 390.934] (==) Matched vesa as autoconfigured driver 2
[ 390.934] (==) Matched modesetting as autoconfigured driver 3
[ 390.934] (==) Matched fbdev as autoconfigured driver 4
[ 390.934] (==) Assigned the driver to the xf86ConfigLayout
[ 390.934] (II) LoadModule: "intel"
[ 391.056] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 391.146] (II) Module intel: vendor="X.Org Foundation"
[ 391.147] compiled for 1.14.0, module version = 2.21.6
[ 391.147] Module class: X.Org Video Driver
[ 391.147] ABI class: X.Org Video Driver, version 14.1
[ 391.147] (II) LoadModule: "vesa"
[ 391.147] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 391.157] (II) Module vesa: vendor="X.Org Foundation"
[ 391.157] compiled for 1.14.0, module version = 2.3.2
[ 391.157] Module class: X.Org Video Driver
[ 391.157] ABI class: X.Org Video Driver, version 14.1
[ 391.157] (II) LoadModule: "modesetting"
[ 391.214] (WW) Warning, couldn't open module modesetting
[ 391.214] (II) UnloadModule: "modesetting"
[ 391.214] (II) Unloading modesetting
[ 391.214] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 391.214] (II) LoadModule: "fbdev"
[ 391.214] (WW) Warning, couldn't open module fbdev
[ 391.215] (II) UnloadModule: "fbdev"
[ 391.215] (II) Unloading fbdev
[ 391.215] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 391.215] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 391.215] (II) VESA: driver for VESA chipsets: vesa
[ 391.216] (++) using VT number 1
[ 391.216] (WW) Falling back to old probe method for vesa
[ 391.216] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 391.216] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 391.216] (==) intel(0): RGB weight 888
[ 391.216] (==) intel(0): Default visual is TrueColor
[ 391.216] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 391.216] (**) intel(0): Relaxed fencing enabled
[ 391.216] (**) intel(0): Wait on SwapBuffers? enabled
[ 391.216] (**) intel(0): Triple buffering? enabled
[ 391.216] (**) intel(0): Framebuffer tiled
[ 391.216] (**) intel(0): Pixmaps tiled
[ 391.216] (**) intel(0): 3D buffers tiled
[ 391.216] (**) intel(0): SwapBuffers wait enabled
[ 391.216] (==) intel(0): video overlay key set to 0x101fe
[ 391.217] (II) intel(0): Output LVDS1 has no monitor section
[ 391.217] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 391.230] (II) intel(0): Output VGA1 has no monitor section
[ 391.483] (II) intel(0): Output HDMI1 has no monitor section
[ 391.523] (II) intel(0): Output DP1 has no monitor section
[ 391.536] (II) intel(0): Output HDMI2 has no monitor section
[ 391.550] (II) intel(0): Output HDMI3 has no monitor section
[ 391.590] (II) intel(0): Output DP2 has no monitor section
[ 391.630] (II) intel(0): Output DP3 has no monitor section
[ 391.630] (II) intel(0): EDID for output LVDS1
[ 391.630] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
[ 391.630] (II) intel(0): Year: 2010 Week: 33
[ 391.630] (II) intel(0): EDID Version: 1.4
[ 391.630] (II) intel(0): Digital Display Input
[ 391.630] (II) intel(0): 6 bits per channel
[ 391.630] (II) intel(0): Digital interface is undefined
[ 391.630] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 391.630] (II) intel(0): Gamma: 2.20
[ 391.630] (II) intel(0): No DPMS capabilities specified
[ 391.630] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 391.630] (II) intel(0): First detailed timing is preferred mode
[ 391.630] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 391.630] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
[ 391.630] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 391.630] (II) intel(0): Manufacturer's mask: 0
[ 391.630] (II) intel(0): Supported detailed timing:
[ 391.630] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
[ 391.630] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 391.630] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 391.630] (II) intel(0): Supported detailed timing:
[ 391.630] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
[ 391.630] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 391.630] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 391.630] (II) intel(0): AUO
[ 391.630] (II) intel(0): B140RW02 V1
[ 391.630] (II) intel(0): EDID (in hex):
[ 391.630] (II) intel(0): 00ffffffffffff0006af3e2100000000
[ 391.631] (II) intel(0): 21140104901f11780261959c59528f26
[ 391.631] (II) intel(0): 21505400000001010101010101010101
[ 391.631] (II) intel(0): 010101010101f82a409a61840c30402a
[ 391.631] (II) intel(0): 330035ae10000018a51c409a61840c30
[ 391.631] (II) intel(0): 402a330035ae10000018000000fe0041
[ 391.631] (II) intel(0): 554f0a202020202020202020000000fe
[ 391.631] (II) intel(0): 004231343052573032205631200a00d0
[ 391.631] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 391.631] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 391.631] (II) intel(0): Printing probed modes for output LVDS1
[ 391.631] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 391.631] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 391.631] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 391.631] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 391.631] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 391.631] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 391.643] (II) intel(0): EDID for output VGA1
[ 391.896] (II) intel(0): EDID for output HDMI1
[ 391.897] (II) intel(0): Manufacturer: DEL Model: a019 Serial#: 825832780
[ 391.897] (II) intel(0): Year: 2006 Week: 50
[ 391.897] (II) intel(0): EDID Version: 1.3
[ 391.897] (II) intel(0): Digital Display Input
[ 391.897] (II) intel(0): Max Image Size [cm]: horiz.: 43 vert.: 27
[ 391.897] (II) intel(0): Gamma: 2.20
[ 391.897] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 391.897] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 391.897] (II) intel(0): Default color space is primary color space
[ 391.897] (II) intel(0): First detailed timing is preferred mode
[ 391.897] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 391.897] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 391.897] (II) intel(0): Supported established timings:
[ 391.897] (II) intel(0): 720x400@70Hz
[ 391.897] (II) intel(0): 640x480@60Hz
[ 391.897] (II) intel(0): 640x480@75Hz
[ 391.897] (II) intel(0): 800x600@60Hz
[ 391.897] (II) intel(0): 800x600@75Hz
[ 391.897] (II) intel(0): 1024x768@60Hz
[ 391.897] (II) intel(0): 1024x768@75Hz
[ 391.897] (II) intel(0): 1280x1024@75Hz
[ 391.897] (II) intel(0): Manufacturer's mask: 0
[ 391.897] (II) intel(0): Supported standard timings:
[ 391.897] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 391.897] (II) intel(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 391.897] (II) intel(0): Supported detailed timing:
[ 391.897] (II) intel(0): clock: 119.0 MHz Image Size: 434 x 270 mm
[ 391.897] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 391.897] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 391.897] (II) intel(0): Serial No: HM0646CB195L
[ 391.897] (II) intel(0): Monitor name: DELL 2007WFP
[ 391.897] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 391.897] (II) intel(0): EDID (in hex):
[ 391.897] (II) intel(0): 00ffffffffffff0010ac19a04c353931
[ 391.897] (II) intel(0): 32100103802b1b78eeee91a3544c9926
[ 391.897] (II) intel(0): 0f5054a54b008180714f010101010101
[ 391.897] (II) intel(0): 0101010101017c2e90a0601a1e403020
[ 391.897] (II) intel(0): 3600b20e1100001a000000ff00484d30
[ 391.897] (II) intel(0): 36343643423139354c0a000000fc0044
[ 391.897] (II) intel(0): 454c4c20323030375746500a000000fd
[ 391.897] (II) intel(0): 00384c1e530e000a202020202020007b
[ 391.897] (II) intel(0): Printing probed modes for output HDMI1
[ 391.897] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 391.897] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 391.897] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 391.898] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 391.898] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 391.898] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 391.898] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 391.898] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 391.898] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 391.898] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 391.898] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 391.940] (II) intel(0): EDID for output DP1
[ 391.953] (II) intel(0): EDID for output HDMI2
[ 391.966] (II) intel(0): EDID for output HDMI3
[ 392.006] (II) intel(0): EDID for output DP2
[ 392.046] (II) intel(0): EDID for output DP3
[ 392.046] (II) intel(0): Output LVDS1 connected
[ 392.046] (II) intel(0): Output VGA1 disconnected
[ 392.046] (II) intel(0): Output HDMI1 connected
[ 392.046] (II) intel(0): Output DP1 disconnected
[ 392.047] (II) intel(0): Output HDMI2 disconnected
[ 392.047] (II) intel(0): Output HDMI3 disconnected
[ 392.047] (II) intel(0): Output DP2 disconnected
[ 392.047] (II) intel(0): Output DP3 disconnected
[ 392.047] (II) intel(0): Using fuzzy aspect match for initial modes
[ 392.047] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 392.047] (II) intel(0): Output HDMI1 using initial mode 1024x768
[ 392.047] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 392.047] (II) intel(0): Kernel page flipping support detected, enabling
[ 392.047] (==) intel(0): DPI set to (96, 96)
[ 392.047] (II) Loading sub module "fb"
[ 392.047] (II) LoadModule: "fb"
[ 392.047] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 392.122] (II) Module fb: vendor="X.Org Foundation"
[ 392.122] compiled for 1.14.1, module version = 1.0.0
[ 392.122] ABI class: X.Org ANSI C Emulation, version 0.4
[ 392.122] (II) Loading sub module "dri2"
[ 392.122] (II) LoadModule: "dri2"
[ 392.122] (II) Module "dri2" already built-in
[ 392.122] (II) UnloadModule: "vesa"
[ 392.122] (II) Unloading vesa
[ 392.123] (==) Depth 24 pixmap format is 32 bpp
[ 392.123] (II) intel(0): [DRI2] Setup complete
[ 392.123] (II) intel(0): [DRI2] DRI driver: i965
[ 392.123] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 392.125] (II) UXA(0): Driver registered support for the following operations:
[ 392.125] (II) solid
[ 392.125] (II) copy
[ 392.125] (II) composite (RENDER acceleration)
[ 392.125] (II) put_image
[ 392.125] (II) get_image
[ 392.125] (==) intel(0): Backing store disabled
[ 392.125] (==) intel(0): Silken mouse enabled
[ 392.125] (II) intel(0): Initializing HW Cursor
[ 392.125] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 392.127] (==) intel(0): DPMS enabled
[ 392.127] (==) intel(0): Intel XvMC decoder enabled
[ 392.127] (II) intel(0): Set up textured video
[ 392.127] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 392.127] (II) intel(0): direct rendering: DRI2 Enabled
[ 392.127] (==) intel(0): hotplug detection: "enabled"
[ 392.700] (--) RandR disabled
[ 392.945] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 392.945] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 392.945] (II) AIGLX: enabled GLX_ARB_create_context
[ 392.945] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 392.945] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 392.945] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 392.945] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 392.945] (II) AIGLX: Loaded and initialized i965
[ 392.945] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 392.945] (II) intel(0): Setting screen physical size to 270 x 203
[ 393.385] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 393.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 393.386] (**) Power Button: Applying InputClass "Keyboard defaults"
[ 393.386] (II) LoadModule: "evdev"
[ 393.386] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 393.415] (II) Module evdev: vendor="X.Org Foundation"
[ 393.415] compiled for 1.14.0, module version = 2.8.0
[ 393.415] Module class: X.Org XInput Driver
[ 393.415] ABI class: X.Org XInput driver, version 19.1
[ 393.415] (II) Using input driver 'evdev' for 'Power Button'
[ 393.415] (**) Power Button: always reports core events
[ 393.415] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 393.416] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 393.416] (--) evdev: Power Button: Found keys
[ 393.416] (II) evdev: Power Button: Configuring as keyboard
[ 393.416] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 393.416] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 393.416] (**) Option "xkb_rules" "evdev"
[ 393.416] (**) Option "xkb_model" "evdev"
[ 393.416] (**) Option "xkb_layout" "fr"
[ 393.416] (**) Option "xkb_variant" "oss"
[ 393.468] (II) config/udev: Adding input device Video Bus (/dev/input/event17)
[ 393.468] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 393.468] (**) Video Bus: Applying InputClass "Keyboard defaults"
[ 393.468] (II) Using input driver 'evdev' for 'Video Bus'
[ 393.468] (**) Video Bus: always reports core events
[ 393.468] (**) evdev: Video Bus: Device: "/dev/input/event17"
[ 393.468] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 393.468] (--) evdev: Video Bus: Found keys
[ 393.468] (II) evdev: Video Bus: Configuring as keyboard
[ 393.468] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event17"
[ 393.468] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 393.468] (**) Option "xkb_rules" "evdev"
[ 393.468] (**) Option "xkb_model" "evdev"
[ 393.468] (**) Option "xkb_layout" "fr"
[ 393.468] (**) Option "xkb_variant" "oss"
[ 393.469] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 393.469] (II) No input driver specified, ignoring this device.
[ 393.469] (II) This device may have been added with another device file.
[ 393.469] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 393.469] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 393.469] (**) Sleep Button: Applying InputClass "Keyboard defaults"
[ 393.469] (II) Using input driver 'evdev' for 'Sleep Button'
[ 393.469] (**) Sleep Button: always reports core events
[ 393.469] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 393.469] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 393.469] (--) evdev: Sleep Button: Found keys
[ 393.469] (II) evdev: Sleep Button: Configuring as keyboard
[ 393.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 393.469] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 393.469] (**) Option "xkb_rules" "evdev"
[ 393.469] (**) Option "xkb_model" "evdev"
[ 393.469] (**) Option "xkb_layout" "fr"
[ 393.469] (**) Option "xkb_variant" "oss"
[ 393.469] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 393.469] (II) config/udev: Adding input device HID 04d9:1133 (/dev/input/event6)
[ 393.469] (**) HID 04d9:1133: Applying InputClass "evdev pointer catchall"
[ 393.469] (II) Using input driver 'evdev' for 'HID 04d9:1133'
[ 393.469] (**) HID 04d9:1133: always reports core events
[ 393.469] (**) evdev: HID 04d9:1133: Device: "/dev/input/event6"
[ 393.469] (--) evdev: HID 04d9:1133: Vendor 0x4d9 Product 0x1133
[ 393.469] (--) evdev: HID 04d9:1133: Found 3 mouse buttons
[ 393.469] (--) evdev: HID 04d9:1133: Found scroll wheel(s)
[ 393.469] (--) evdev: HID 04d9:1133: Found relative axes
[ 393.469] (--) evdev: HID 04d9:1133: Found x and y relative axes
[ 393.469] (II) evdev: HID 04d9:1133: Configuring as mouse
[ 393.469] (II) evdev: HID 04d9:1133: Adding scrollwheel support
[ 393.470] (**) evdev: HID 04d9:1133: YAxisMapping: buttons 4 and 5
[ 393.470] (**) evdev: HID 04d9:1133: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 393.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input6/event6"
[ 393.470] (II) XINPUT: Adding extended input device "HID 04d9:1133" (type: MOUSE, id 9)
[ 393.470] (II) evdev: HID 04d9:1133: initialized for relative axes.
[ 393.470] (**) HID 04d9:1133: (accel) keeping acceleration scheme 1
[ 393.470] (**) HID 04d9:1133: (accel) acceleration profile 0
[ 393.470] (**) HID 04d9:1133: (accel) acceleration factor: 2.000
[ 393.470] (**) HID 04d9:1133: (accel) acceleration threshold: 4
[ 393.471] (II) config/udev: Adding input device HID 04d9:1133 (/dev/input/mouse0)
[ 393.471] (II) No input driver specified, ignoring this device.
[ 393.471] (II) This device may have been added with another device file.
[ 393.472] (II) config/udev: Adding input device DELL DELL USB Keyboard (/dev/input/event7)
[ 393.472] (**) DELL DELL USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 393.472] (**) DELL DELL USB Keyboard: Applying InputClass "Keyboard defaults"
[ 393.472] (II) Using input driver 'evdev' for 'DELL DELL USB Keyboard'
[ 393.472] (**) DELL DELL USB Keyboard: always reports core events
[ 393.472] (**) evdev: DELL DELL USB Keyboard: Device: "/dev/input/event7"
[ 393.472] (--) evdev: DELL DELL USB Keyboard: Vendor 0x413c Product 0x2005
[ 393.472] (--) evdev: DELL DELL USB Keyboard: Found keys
[ 393.472] (II) evdev: DELL DELL USB Keyboard: Configuring as keyboard
[ 393.472] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input7/event7"
[ 393.472] (II) XINPUT: Adding extended input device "DELL DELL USB Keyboard" (type: KEYBOARD, id 10)
[ 393.472] (**) Option "xkb_rules" "evdev"
[ 393.472] (**) Option "xkb_model" "evdev"
[ 393.472] (**) Option "xkb_layout" "fr"
[ 393.472] (**) Option "xkb_variant" "oss"
[ 393.473] (II) config/udev: Adding input device Integrated Camera (/dev/input/event16)
[ 393.473] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 393.473] (**) Integrated Camera: Applying InputClass "Keyboard defaults"
[ 393.473] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 393.473] (**) Integrated Camera: always reports core events
[ 393.473] (**) evdev: Integrated Camera: Device: "/dev/input/event16"
[ 393.473] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
[ 393.473] (--) evdev: Integrated Camera: Found keys
[ 393.473] (II) evdev: Integrated Camera: Configuring as keyboard
[ 393.474] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16/event16"
[ 393.474] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 11)
[ 393.474] (**) Option "xkb_rules" "evdev"
[ 393.474] (**) Option "xkb_model" "evdev"
[ 393.474] (**) Option "xkb_layout" "fr"
[ 393.474] (**) Option "xkb_variant" "oss"
[ 393.475] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 393.475] (II) No input driver specified, ignoring this device.
[ 393.475] (II) This device may have been added with another device file.
[ 393.475] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 393.475] (II) No input driver specified, ignoring this device.
[ 393.475] (II) This device may have been added with another device file.
[ 393.476] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
[ 393.476] (II) No input driver specified, ignoring this device.
[ 393.476] (II) This device may have been added with another device file.
[ 393.476] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 393.476] (II) No input driver specified, ignoring this device.
[ 393.476] (II) This device may have been added with another device file.
[ 393.476] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 393.477] (II) No input driver specified, ignoring this device.
[ 393.477] (II) This device may have been added with another device file.
[ 393.477] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event14)
[ 393.477] (II) No input driver specified, ignoring this device.
[ 393.477] (II) This device may have been added with another device file.
[ 393.477] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 393.477] (II) No input driver specified, ignoring this device.
[ 393.477] (II) This device may have been added with another device file.
[ 393.477] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 393.477] (II) No input driver specified, ignoring this device.
[ 393.477] (II) This device may have been added with another device file.
[ 393.477] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 393.477] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 393.477] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard defaults"
[ 393.477] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 393.477] (**) AT Translated Set 2 keyboard: always reports core events
[ 393.477] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 393.477] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 393.477] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 393.477] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 393.477] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 393.477] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 393.477] (**) Option "xkb_rules" "evdev"
[ 393.477] (**) Option "xkb_model" "evdev"
[ 393.477] (**) Option "xkb_layout" "fr"
[ 393.477] (**) Option "xkb_variant" "oss"
[ 393.478] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 393.478] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 393.478] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 393.478] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 393.478] (II) LoadModule: "synaptics"
[ 393.478] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 393.503] (II) Module synaptics: vendor="X.Org Foundation"
[ 393.503] compiled for 1.14.0, module version = 1.7.0
[ 393.503] Module class: X.Org XInput Driver
[ 393.503] ABI class: X.Org XInput driver, version 19.1
[ 393.503] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 393.503] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 393.503] (**) Option "Device" "/dev/input/event15"
[ 393.520] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 75)
[ 393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820 (res 105)
[ 393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 393.520] (**) Option "TapButton1" "1"
[ 393.520] (**) Option "TapButton2" "2"
[ 393.520] (**) Option "TapButton3" "3"
[ 393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 393.520] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 393.530] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
[ 393.530] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 393.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 393.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 393.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 393.530] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 393.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 393.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 393.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 393.531] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 393.531] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 393.531] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 393.532] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
[ 393.532] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 393.532] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 393.532] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 393.532] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
[ 393.532] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 393.532] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 393.532] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 393.532] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 393.532] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 393.532] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 393.532] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 393.532] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input18/event18"
[ 393.532] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 393.532] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 393.533] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 393.533] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 393.533] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 393.533] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 393.533] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 393.534] (II) No input driver specified, ignoring this device.
[ 393.534] (II) This device may have been added with another device file.
[ 393.534] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 393.534] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 393.535] (**) ThinkPad Extra Buttons: Applying InputClass "Keyboard defaults"
[ 393.535] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 393.535] (**) ThinkPad Extra Buttons: always reports core events
[ 393.535] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[ 393.535] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 393.535] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 393.535] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 393.535] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input4/event4"
[ 393.535] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15)
[ 393.535] (**) Option "xkb_rules" "evdev"
[ 393.535] (**) Option "xkb_model" "evdev"
[ 393.535] (**) Option "xkb_layout" "fr"
[ 393.535] (**) Option "xkb_variant" "oss"
[ 395.112] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 395.112] (II) intel(0): Printing DDC gathered Modelines:
[ 395.112] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 395.112] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 395.523] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 395.523] (II) intel(0): Printing DDC gathered Modelines:
[ 395.524] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 395.524] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 395.942] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 395.942] (II) intel(0): Printing DDC gathered Modelines:
[ 395.942] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 395.942] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 583.668] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 583.668] (II) intel(0): Printing DDC gathered Modelines:
[ 583.668] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 583.668] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 593.901] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 593.901] (II) intel(0): Printing DDC gathered Modelines:
[ 593.901] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 593.901] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 999.675] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 999.675] (II) intel(0): Printing DDC gathered Modelines:
[ 999.675] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 999.675] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1000.092] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 1000.420] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1000.420] (II) intel(0): Printing DDC gathered Modelines:
[ 1000.420] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1000.420] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1000.860] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1000.860] (II) intel(0): Printing DDC gathered Modelines:
[ 1000.860] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1000.860] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1001.281] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1001.281] (II) intel(0): Printing DDC gathered Modelines:
[ 1001.281] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1001.281] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1001.694] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1001.694] (II) intel(0): Printing DDC gathered Modelines:
[ 1001.694] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1001.694] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1002.128] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1002.128] (II) intel(0): Printing DDC gathered Modelines:
[ 1002.128] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1002.128] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1009.889] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1009.889] (II) intel(0): Printing DDC gathered Modelines:
[ 1009.889] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1009.889] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1026.586] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1026.586] (II) intel(0): Printing DDC gathered Modelines:
[ 1026.586] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1026.586] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1027.284] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1027.284] (II) intel(0): Printing DDC gathered Modelines:
[ 1027.284] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1027.284] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 1027.699] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 1027.699] (II) intel(0): Printing DDC gathered Modelines:
[ 1027.700] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 1027.700] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
For me, it looks like a regression, maybe linked to the kernel upgrade to branch 3.8, or maybe to another (obscure to me, like EDID management) packet.Thanks for your attention.
In the above logs, higher resolutions seems to be detected on both screens, hence my surprise :
[ 391.631] (II) intel(0): Printing probed modes for output LVDS1
[ 391.631] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 391.897] (II) intel(0): Printing probed modes for output HDMI1
[ 391.897] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
If it can help here is also my current xrandr output (after having called it manually to use the preferred resolution of each screen)
itanguy ~ $ xrandr
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 434mm x 270mm
1680x1050 59.9*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
If needed, I may reboot and provide xrandr output after boot (it will be 1024x768), or could other logs help you ? Please ask... -
[SOLVED] Gnome won't boot up after catalyst install
Hello all,
I'm new to Arch, and seem to have been thrown into the deep end here, as it were. I installed the catalyst drivers for my Radeon HD8xxx card in my laptop to try and get some better video performance, and, through the help of the extraordinarily informative wiki, was able to do so. However when it boots now, it stays on the first screen with all the OK's (I removed quiet from my boot options in grub). I have to switch to tty2 (Alt+F2) and log in to start using it. Here's the kicker though: from there I can run startx and work just fine in x with the catalyst drivers. I don't get that, but I'm hoping someone else might. I apologize in advance if this is noobish mistake, but appreciate any pointers I can get.
Here's some relevant technical info:
/var/log/Xorg.0.log (if I understand things correctly, this would be from startx since that's where I'm working now, right?):
[ 49.034]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 49.034] X Protocol Version 11, Revision 0
[ 49.034] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 49.035] Current Operating System: Linux samwise 3.15.4-1-ARCH #1 SMP PREEMPT Mon Jul 7 07:42:54 CEST 2014 x86_64
[ 49.035] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eb465246-d35b-4dc0-a92a-d948f621ccaa rw nomodeset
[ 49.035] Build Date: 27 June 2014 07:32:26PM
[ 49.035]
[ 49.035] Current version of pixman: 0.32.6
[ 49.035] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 49.035] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 49.036] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 10 16:09:18 2014
[ 49.036] (==) Using config file: "/etc/X11/xorg.conf"
[ 49.037] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 49.037] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 49.037] (==) ServerLayout "aticonfig Layout"
[ 49.037] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 49.037] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 49.037] (**) | |-->Device "aticonfig-Device[0]-0"
[ 49.037] (==) Automatically adding devices
[ 49.037] (==) Automatically enabling devices
[ 49.037] (==) Automatically adding GPU devices
[ 49.037] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 49.037] Entry deleted from font path.
[ 49.037] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 49.037] Entry deleted from font path.
[ 49.037] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 49.037] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 49.037] Entry deleted from font path.
[ 49.037] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 49.037] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 49.037] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 49.037] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 49.037] (II) Loader magic: 0x811cc0
[ 49.037] (II) Module ABI versions:
[ 49.037] X.Org ANSI C Emulation: 0.4
[ 49.037] X.Org Video Driver: 15.0
[ 49.037] X.Org XInput driver : 20.0
[ 49.037] X.Org Server Extension : 8.0
[ 49.038] (--) PCI:*(0:0:1:0) 1002:9995:17aa:510a rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 49.038] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 49.039] Initializing built-in extension Generic Event Extension
[ 49.039] Initializing built-in extension SHAPE
[ 49.039] Initializing built-in extension MIT-SHM
[ 49.039] Initializing built-in extension XInputExtension
[ 49.039] Initializing built-in extension XTEST
[ 49.039] Initializing built-in extension BIG-REQUESTS
[ 49.039] Initializing built-in extension SYNC
[ 49.039] Initializing built-in extension XKEYBOARD
[ 49.039] Initializing built-in extension XC-MISC
[ 49.039] Initializing built-in extension SECURITY
[ 49.039] Initializing built-in extension XINERAMA
[ 49.039] Initializing built-in extension XFIXES
[ 49.040] Initializing built-in extension RENDER
[ 49.040] Initializing built-in extension RANDR
[ 49.040] Initializing built-in extension COMPOSITE
[ 49.040] Initializing built-in extension DAMAGE
[ 49.040] Initializing built-in extension MIT-SCREEN-SAVER
[ 49.040] Initializing built-in extension DOUBLE-BUFFER
[ 49.040] Initializing built-in extension RECORD
[ 49.040] Initializing built-in extension DPMS
[ 49.043] Initializing built-in extension Present
[ 49.045] Initializing built-in extension DRI3
[ 49.048] Initializing built-in extension X-Resource
[ 49.051] Initializing built-in extension XVideo
[ 49.053] Initializing built-in extension XVideo-MotionCompensation
[ 49.056] Initializing built-in extension XFree86-VidModeExtension
[ 49.058] Initializing built-in extension XFree86-DGA
[ 49.061] Initializing built-in extension XFree86-DRI
[ 49.063] Initializing built-in extension DRI2
[ 49.063] (II) "glx" will be loaded by default.
[ 49.063] (II) LoadModule: "glx"
[ 49.064] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 49.064] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 49.064] compiled for 6.9.0, module version = 1.0.0
[ 49.067] Loading extension GLX
[ 49.067] (II) LoadModule: "fglrx"
[ 49.067] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 49.086] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 49.086] compiled for 1.4.99.906, module version = 14.10.2
[ 49.086] Module class: X.Org Video Driver
[ 49.086] (II) Loading sub module "fglrxdrm"
[ 49.086] (II) LoadModule: "fglrxdrm"
[ 49.086] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 49.117] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 49.117] compiled for 1.4.99.906, module version = 14.10.2
[ 49.117] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 49.117] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001
[ 49.117] (II) AMD Proprietary Linux Driver Build Date: May 5 2014 21:38:38
[ 49.117] (++) using VT number 2
[ 49.117] (WW) Falling back to old probe method for fglrx
[ 49.186] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 49.189] ukiDynamicMajor: found major device number 251
[ 49.189] ukiDynamicMajor: found major device number 251
[ 49.189] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 49.189] ukiOpenDevice: node name is /dev/ati/card0
[ 49.189] ukiOpenDevice: open result is 9, (OK)
[ 49.533] ukiOpenByBusid: ukiOpenMinor returns 9
[ 49.533] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 49.629] (--) Chipset Supported AMD Graphics Processor (0x9995) found
[ 49.629] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 49.631] (II) fglrx(0): pEnt->device->identifier=0x12181a0
[ 49.631] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 49.631] (II) Loading sub module "vgahw"
[ 49.631] (II) LoadModule: "vgahw"
[ 49.631] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 49.644] (II) Module vgahw: vendor="X.Org Foundation"
[ 49.644] compiled for 1.15.2, module version = 0.1.0
[ 49.644] ABI class: X.Org Video Driver, version 15.0
[ 49.644] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 49.644] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 49.644] (==) fglrx(0): Default visual is TrueColor
[ 49.645] (**) fglrx(0): Option "DPMS" "true"
[ 49.645] (==) fglrx(0): RGB weight 888
[ 49.645] (II) fglrx(0): Using 8 bits per RGB
[ 49.645] (==) fglrx(0): Buffer Tiling is ON
[ 49.645] (II) Loading sub module "fglrxdrm"
[ 49.645] (II) LoadModule: "fglrxdrm"
[ 49.645] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 49.645] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 49.645] compiled for 1.4.99.906, module version = 14.10.2
[ 49.647] ukiDynamicMajor: found major device number 251
[ 49.647] ukiDynamicMajor: found major device number 251
[ 49.647] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 49.647] ukiOpenDevice: node name is /dev/ati/card0
[ 49.647] ukiOpenDevice: open result is 11, (OK)
[ 49.647] ukiOpenByBusid: ukiOpenMinor returns 11
[ 49.647] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 49.647] (**) fglrx(0): NoAccel = NO
[ 49.647] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 49.647] (--) fglrx(0): Chipset: "AMD Radeon HD 8450G" (Chipset = 0x9995)
[ 49.647] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x510a)
[ 49.647] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 49.647] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 49.647] (--) fglrx(0): MMIO registers at 0xf0300000
[ 49.647] (--) fglrx(0): I/O port at 0x00003000
[ 49.647] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 49.666] (II) fglrx(0): ATIF platform detected
[ 49.670] (II) fglrx(0): AC Adapter is used
[ 49.680] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 49.685] (II) Loading sub module "vbe"
[ 49.685] (II) LoadModule: "vbe"
[ 49.685] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 49.686] (II) Module vbe: vendor="X.Org Foundation"
[ 49.686] compiled for 1.15.2, module version = 1.1.0
[ 49.686] ABI class: X.Org Video Driver, version 15.0
[ 49.690] (II) fglrx(0): VESA BIOS detected
[ 49.690] (II) fglrx(0): VESA VBE Version 3.0
[ 49.690] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 49.690] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 49.690] (II) fglrx(0): VESA VBE OEM Software Rev: 15.31
[ 49.690] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 49.690] (II) fglrx(0): VESA VBE OEM Product: DVST
[ 49.690] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 49.690] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 49.690] (--) fglrx(0): Video RAM: 786432 kByte, Type: DDR3
[ 49.690] (II) fglrx(0): PCIE card detected
[ 49.690] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 49.690] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 49.690] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x30000000)
[ 49.690] (II) fglrx(0): RandR 1.2 support is enabled!
[ 49.690] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 49.691] (II) Loading sub module "fb"
[ 49.691] (II) LoadModule: "fb"
[ 49.691] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 49.692] (II) Module fb: vendor="X.Org Foundation"
[ 49.693] compiled for 1.15.2, module version = 1.0.0
[ 49.693] ABI class: X.Org ANSI C Emulation, version 0.4
[ 49.693] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 49.693] (II) Loading sub module "ddc"
[ 49.693] (II) LoadModule: "ddc"
[ 49.693] (II) Module "ddc" already built-in
[ 49.839] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 49.839] (II) fglrx(0): Output DFP1 has no monitor section
[ 49.839] (II) fglrx(0): Output CRT1 has no monitor section
[ 49.839] (II) Loading sub module "ddc"
[ 49.839] (II) LoadModule: "ddc"
[ 49.839] (II) Module "ddc" already built-in
[ 49.839] (II) fglrx(0): Connected Display0: LVDS
[ 49.839] (II) fglrx(0): Display0 EDID data ---------------------------
[ 49.839] (II) fglrx(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 49.839] (II) fglrx(0): Year: 2011 Week: 0
[ 49.839] (II) fglrx(0): EDID Version: 1.3
[ 49.839] (II) fglrx(0): Digital Display Input
[ 49.839] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 49.839] (II) fglrx(0): Gamma: 2.20
[ 49.839] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 49.839] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 49.839] (II) fglrx(0): First detailed timing is preferred mode
[ 49.839] (II) fglrx(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 49.839] (II) fglrx(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 49.839] (II) fglrx(0): Manufacturer's mask: 0
[ 49.839] (II) fglrx(0): Supported detailed timing:
[ 49.839] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 49.839] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 49.839] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 49.839] (II) fglrx(0): Supported detailed timing:
[ 49.839] (II) fglrx(0): clock: 57.8 MHz Image Size: 344 x 193 mm
[ 49.839] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 49.839] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 49.839] (II) fglrx(0): Unknown vendor-specific block f
[ 49.839] (II) fglrx(0): N156BGE-L11
[ 49.839] (II) fglrx(0): EDID (in hex):
[ 49.840] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[ 49.840] (II) fglrx(0): 0015010380231378ea00259e57529929
[ 49.840] (II) fglrx(0): 15505400000001010101010101010101
[ 49.840] (II) fglrx(0): 010101010101121b5664500014301022
[ 49.840] (II) fglrx(0): 260058c1100000189116566450001430
[ 49.840] (II) fglrx(0): 1022260058c1100000180000000f008c
[ 49.840] (II) fglrx(0): 09328c09321609000daea915000000fe
[ 49.840] (II) fglrx(0): 004e3135364247452d4c31310a20007e
[ 49.840] (II) fglrx(0): End of Display0 EDID data --------------------
[ 49.840] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 49.840] (II) fglrx(0): EDID for output LVDS
[ 49.840] (II) fglrx(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 49.840] (II) fglrx(0): Year: 2011 Week: 0
[ 49.840] (II) fglrx(0): EDID Version: 1.3
[ 49.840] (II) fglrx(0): Digital Display Input
[ 49.840] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 49.840] (II) fglrx(0): Gamma: 2.20
[ 49.840] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 49.840] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 49.840] (II) fglrx(0): First detailed timing is preferred mode
[ 49.840] (II) fglrx(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 49.840] (II) fglrx(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 49.840] (II) fglrx(0): Manufacturer's mask: 0
[ 49.840] (II) fglrx(0): Supported detailed timing:
[ 49.840] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 49.840] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 49.840] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 49.840] (II) fglrx(0): Supported detailed timing:
[ 49.840] (II) fglrx(0): clock: 57.8 MHz Image Size: 344 x 193 mm
[ 49.840] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 49.840] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 49.840] (II) fglrx(0): Unknown vendor-specific block f
[ 49.840] (II) fglrx(0): N156BGE-L11
[ 49.840] (II) fglrx(0): EDID (in hex):
[ 49.840] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[ 49.840] (II) fglrx(0): 0015010380231378ea00259e57529929
[ 49.840] (II) fglrx(0): 15505400000001010101010101010101
[ 49.840] (II) fglrx(0): 010101010101121b5664500014301022
[ 49.840] (II) fglrx(0): 260058c1100000189116566450001430
[ 49.841] (II) fglrx(0): 1022260058c1100000180000000f008c
[ 49.841] (II) fglrx(0): 09328c09321609000daea915000000fe
[ 49.841] (II) fglrx(0): 004e3135364247452d4c31310a20007e
[ 49.841] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[ 49.841] (II) fglrx(0): Printing DDC gathered Modelines:
[ 49.841] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 49.841] (II) fglrx(0): Modeline "1366x768"x0.0 57.77 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Printing probed modes for output LVDS
[ 49.841] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 49.841] (II) fglrx(0): Modeline "1366x768"x50.0 57.77 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1360x768"x60.0 69.30 1360 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1360x768"x50.0 57.77 1360 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1280x768"x50.0 57.77 1280 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1382 1416 1466 720 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1280x720"x50.0 57.77 1280 1382 1416 1466 720 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1024x768"x50.0 57.77 1024 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1382 1416 1466 600 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1024x600"x50.0 57.77 1024 1382 1416 1466 600 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1382 1416 1466 600 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "800x600"x50.0 57.77 800 1382 1416 1466 600 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1382 1416 1466 480 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "800x480"x50.0 57.77 800 1382 1416 1466 480 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1382 1416 1466 480 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "640x480"x50.0 57.77 640 1382 1416 1466 480 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): EDID for output DFP1
[ 49.841] (II) fglrx(0): EDID for output CRT1
[ 49.841] (II) fglrx(0): Output LVDS connected
[ 49.841] (II) fglrx(0): Output DFP1 disconnected
[ 49.841] (II) fglrx(0): Output CRT1 disconnected
[ 49.841] (II) fglrx(0): Using exact sizes for initial modes
[ 49.841] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 49.841] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 49.841] (II) fglrx(0): Display dimensions: (350, 190) mm
[ 49.841] (II) fglrx(0): DPI set to (99, 102)
[ 49.841] (II) fglrx(0): Eyefinity capable adapter detected.
[ 49.841] (II) fglrx(0): Adapter AMD Radeon HD 8450G has 4 configurable heads and 1 displays connected.
[ 49.841] (==) fglrx(0): PseudoColor visuals disabled
[ 49.841] (II) Loading sub module "ramdac"
[ 49.841] (II) LoadModule: "ramdac"
[ 49.841] (II) Module "ramdac" already built-in
[ 49.841] (==) fglrx(0): NoDRI = NO
[ 49.841] (==) fglrx(0): Capabilities: 0x00000000
[ 49.841] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 49.841] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 49.841] (==) fglrx(0): UseFastTLS=0
[ 49.841] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 49.841] (--) Depth 24 pixmap format is 32 bpp
[ 49.841] Loading extension ATIFGLRXDRI
[ 49.841] (II) fglrx(0): doing swlDriScreenInit
[ 49.841] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 49.841] ukiDynamicMajor: found major device number 251
[ 49.841] ukiDynamicMajor: found major device number 251
[ 49.841] ukiDynamicMajor: found major device number 251
[ 49.841] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 49.841] ukiOpenDevice: node name is /dev/ati/card0
[ 49.841] ukiOpenDevice: open result is 12, (OK)
[ 49.841] ukiOpenByBusid: ukiOpenMinor returns 12
[ 49.841] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 49.842] (II) fglrx(0): [uki] DRM interface version 1.0
[ 49.842] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[ 49.842] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 49.842] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f64c6e62000
[ 49.842] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 49.842] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 49.842] (II) fglrx(0): swlDriScreenInit done
[ 49.842] (II) fglrx(0): Kernel Module Version Information:
[ 49.842] (II) fglrx(0): Name: fglrx
[ 49.842] (II) fglrx(0): Version: 14.10.2
[ 49.842] (II) fglrx(0): Date: May 5 2014
[ 49.842] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 49.842] (II) fglrx(0): Kernel Module version matches driver.
[ 49.842] (II) fglrx(0): Kernel Module Build Time Information:
[ 49.842] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.15.4-1-ARCH
[ 49.842] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 49.842] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 49.842] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 49.842] (II) fglrx(0): [uki] register handle = 0x00004000
[ 49.844] (II) fglrx(0): DRI initialization successfull
[ 49.856] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[ 49.862] (==) fglrx(0): Backing store enabled
[ 49.862] Loading extension FGLRXEXTENSION
[ 49.862] (**) fglrx(0): DPMS enabled
[ 49.863] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 49.863] (**) fglrx(0): Textured Video is enabled.
[ 49.863] (II) LoadModule: "glesx"
[ 49.863] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 50.008] (II) Module glesx: vendor="X.Org Foundation"
[ 50.008] compiled for 1.4.99.906, module version = 1.0.0
[ 50.008] Loading extension GLESX
[ 50.008] (II) fglrx(0): GLESX enableFlags = 8784
[ 50.016] (II) fglrx(0): GLESX is enabled
[ 50.017] (II) LoadModule: "amdxmm"
[ 50.017] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 50.035] (II) Module amdxmm: vendor="X.Org Foundation"
[ 50.035] compiled for 1.4.99.906, module version = 2.0.0
[ 50.058] Loading extension AMDXVOPL
[ 50.058] Loading extension AMDXVBA
[ 50.086] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 50.088] (II) fglrx(0): Enable composite support successfully
[ 50.088] (II) fglrx(0): X context handle = 0x1
[ 50.088] (II) fglrx(0): [DRI] installation complete
[ 50.089] (==) fglrx(0): Silken mouse enabled
[ 50.106] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 50.107] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 50.115] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 50.115] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 52.673] (--) RandR disabled
[ 52.679] ukiDynamicMajor: found major device number 251
[ 52.679] ukiDynamicMajor: found major device number 251
[ 52.679] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 52.679] ukiOpenDevice: node name is /dev/ati/card0
[ 52.679] ukiOpenDevice: open result is 13, (OK)
[ 52.679] ukiOpenByBusid: ukiOpenMinor returns 13
[ 52.679] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 52.680] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 52.929] ukiDynamicMajor: found major device number 251
[ 52.929] ukiDynamicMajor: found major device number 251
[ 52.929] ukiDynamicMajor: found major device number 251
[ 52.929] ukiOpenDevice: node name is /dev/ati/card0
[ 52.929] ukiOpenDevice: open result is 14, (OK)
[ 52.929] ukiGetBusid returned 'PCI:0:1:0'
[ 52.929] ukiOpenDevice: node name is /dev/ati/card1
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: Open failed
[ 52.929] ukiOpenDevice: node name is /dev/ati/card2
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: Open failed
[ 52.929] ukiOpenDevice: node name is /dev/ati/card3
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: Open failed
[ 52.929] ukiOpenDevice: node name is /dev/ati/card4
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card5
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card6
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card7
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card8
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card9
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card10
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card11
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card12
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card13
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card14
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card15
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiDynamicMajor: found major device number 251
[ 52.931] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 52.931] ukiOpenDevice: node name is /dev/ati/card0
[ 52.931] ukiOpenDevice: open result is 14, (OK)
[ 52.931] ukiOpenByBusid: ukiOpenMinor returns 14
[ 52.931] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 53.834] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 53.835] ukiDynamicMajor: found major device number 251
[ 53.835] ukiDynamicMajor: found major device number 251
[ 53.835] ukiDynamicMajor: found major device number 251
[ 53.836] ukiOpenDevice: node name is /dev/ati/card0
[ 53.836] ukiOpenDevice: open result is 15, (OK)
[ 53.836] ukiGetBusid returned 'PCI:0:1:0'
[ 53.836] ukiOpenDevice: node name is /dev/ati/card1
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card2
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card3
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card4
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card5
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card6
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card7
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card8
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card9
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card10
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card11
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card12
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card13
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card14
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card15
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiDynamicMajor: found major device number 251
[ 53.837] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 53.837] ukiOpenDevice: node name is /dev/ati/card0
[ 53.837] ukiOpenDevice: open result is 15, (OK)
[ 53.837] ukiOpenByBusid: ukiOpenMinor returns 15
[ 53.837] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 53.941] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 54.199] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 54.199] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 54.199] (II) LoadModule: "evdev"
[ 54.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 54.222] (II) Module evdev: vendor="X.Org Foundation"
[ 54.223] compiled for 1.15.1, module version = 2.9.0
[ 54.223] Module class: X.Org XInput Driver
[ 54.223] ABI class: X.Org XInput driver, version 20.0
[ 54.223] (II) Using input driver 'evdev' for 'Power Button'
[ 54.223] (**) Power Button: always reports core events
[ 54.223] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 54.223] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 54.223] (--) evdev: Power Button: Found keys
[ 54.223] (II) evdev: Power Button: Configuring as keyboard
[ 54.223] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 54.223] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 54.223] (**) Option "xkb_rules" "evdev"
[ 54.223] (**) Option "xkb_model" "pc104"
[ 54.223] (**) Option "xkb_layout" "us"
[ 54.249] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 54.250] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 54.250] (II) Using input driver 'evdev' for 'Video Bus'
[ 54.250] (**) Video Bus: always reports core events
[ 54.250] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 54.250] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 54.250] (--) evdev: Video Bus: Found keys
[ 54.250] (II) evdev: Video Bus: Configuring as keyboard
[ 54.250] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input5/event4"
[ 54.250] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 54.250] (**) Option "xkb_rules" "evdev"
[ 54.250] (**) Option "xkb_model" "pc104"
[ 54.250] (**) Option "xkb_layout" "us"
[ 54.250] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 54.250] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 54.250] (II) Using input driver 'evdev' for 'Power Button'
[ 54.250] (**) Power Button: always reports core events
[ 54.250] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 54.250] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 54.250] (--) evdev: Power Button: Found keys
[ 54.250] (II) evdev: Power Button: Configuring as keyboard
[ 54.250] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[ 54.250] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 54.250] (**) Option "xkb_rules" "evdev"
[ 54.250] (**) Option "xkb_model" "pc104"
[ 54.250] (**) Option "xkb_layout" "us"
[ 54.251] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 54.251] (II) No input driver specified, ignoring this device.
[ 54.251] (II) This device may have been added with another device file.
[ 54.251] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 54.251] (II) No input driver specified, ignoring this device.
[ 54.251] (II) This device may have been added with another device file.
[ 54.251] (II) config/udev: Adding input device Integrated Camera (/dev/input/event12)
[ 54.251] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 54.251] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 54.251] (**) Integrated Camera: always reports core events
[ 54.251] (**) evdev: Integrated Camera: Device: "/dev/input/event12"
[ 54.251] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb44d
[ 54.251] (--) evdev: Integrated Camera: Found keys
[ 54.251] (II) evdev: Integrated Camera: Configuring as keyboard
[ 54.251] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb7/7-2/7-2:1.0/input/input14/event12"
[ 54.251] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 54.251] (**) Option "xkb_rules" "evdev"
[ 54.251] (**) Option "xkb_model" "pc104"
[ 54.251] (**) Option "xkb_layout" "us"
[ 54.252] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 54.252] (II) No input driver specified, ignoring this device.
[ 54.252] (II) This device may have been added with another device file.
[ 54.252] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event9)
[ 54.252] (II) No input driver specified, ignoring this device.
[ 54.252] (II) This device may have been added with another device file.
[ 54.252] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event8)
[ 54.252] (II) No input driver specified, ignoring this device.
[ 54.252] (II) This device may have been added with another device file.
[ 54.252] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 54.252] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 54.252] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 54.252] (**) AT Translated Set 2 keyboard: always reports core events
[ 54.252] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 54.252] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 54.252] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 54.252] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 54.252] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 54.252] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 54.252] (**) Option "xkb_rules" "evdev"
[ 54.252] (**) Option "xkb_model" "pc104"
[ 54.252] (**) Option "xkb_layout" "us"
[ 54.253] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 54.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 54.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 54.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 54.253] (II) LoadModule: "synaptics"
[ 54.253] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 54.258] (II) Module synaptics: vendor="X.Org Foundation"
[ 54.258] compiled for 1.15.1, module version = 1.8.0
[ 54.258] Module class: X.Org XInput Driver
[ 54.258] ABI class: X.Org XInput driver, version 20.0
[ 54.258] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 54.258] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 54.258] (**) Option "Device" "/dev/input/event11"
[ 54.384] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5702 (res 51)
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4750 (res 67)
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 54.385] (**) Option "TapButton1" "1"
[ 54.385] (**) Option "TapButton2" "2"
[ 54.385] (**) Option "TapButton3" "3"
[ 54.385] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 54.385] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 54.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 54.467] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 54.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 54.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 54.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 54.467] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 54.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 54.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 54.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 54.467] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 54.468] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 54.468] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 54.468] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event13)
[ 54.468] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 54.468] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 54.468] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 54.468] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event13"
[ 54.469] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 54.469] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 54.469] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 54.469] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 54.469] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 54.469] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 54.469] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 54.469] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input13/event13"
[ 54.469] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 54.469] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 54.469] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 54.469] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 54.469] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 54.469] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 54.470] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 54.470] (II) No input driver specified, ignoring this device.
[ 54.470] (II) This device may have been added with another device file.
[ 54.470] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 54.470] (II) No input driver specified, ignoring this device.
[ 54.470] (II) This device may have been added with another device file.
[ 54.471] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 54.471] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 54.471] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 54.471] (**) ThinkPad Extra Buttons: always reports core events
[ 54.471] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event6"
[ 54.471] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 54.471] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 54.471] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 54.471] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event6"
[ 54.471] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 54.472] (**) Option "xkb_rules" "evdev"
[ 54.472] (**) Option "xkb_model" "pc104"
[ 54.472] (**) Option "xkb_layout" "us"
[ 54.479] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 1453.877] ukiDynamicMajor: found major device number 251
[ 1453.877] ukiDynamicMajor: found major device number 251
[ 1453.878] ukiDynamicMajor: found major device number 251
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card0
[ 1453.878] ukiOpenDevice: open result is 41, (OK)
[ 1453.878] ukiGetBusid returned 'PCI:0:1:0'
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card1
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card2
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card3
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card4
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card5
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card6
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card7
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card8
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card9
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card10
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card11
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card12
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card13
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: Open failed
[ 1453.879] ukiOpenDevice: node name is /dev/ati/card14
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: Open failed
[ 1453.879] ukiOpenDevice: node name is /dev/ati/card15
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: Open failed
[ 1453.879] ukiDynamicMajor: found major device number 251
[ 1453.879] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1453.879] ukiOpenDevice: node name is /dev/ati/card0
[ 1453.879] ukiOpenDevice: open result is 41, (OK)
[ 1453.879] ukiOpenByBusid: ukiOpenMinor returns 41
[ 1453.879] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
/var/log/Xorg.0.log.old:
[ 144.740]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 144.755] X Protocol Version 11, Revision 0
[ 144.759] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 144.764] Current Operating System: Linux samwise 3.15.4-1-ARCH #1 SMP PREEMPT Mon Jul 7 07:42:54 CEST 2014 x86_64
[ 144.765] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eb465246-d35b-4dc0-a92a-d948f621ccaa rw nomodeset
[ 144.774] Build Date: 27 June 2014 07:32:26PM
[ 144.779]
[ 144.784] Current version of pixman: 0.32.6
[ 144.793] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 144.793] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 144.812] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 10 13:39:10 2014
[ 144.817] (==) Using config file: "/etc/X11/xorg.conf"
[ 144.821] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 144.826] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 144.826] (==) ServerLayout "aticonfig Layout"
[ 144.826] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 144.826] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 144.826] (**) | |-->Device "aticonfig-Device[0]-0"
[ 144.826] (==) Automatically adding devices
[ 144.826] (==) Automatically enabling devices
[ 144.826] (==) Automatically adding GPU devices
[ 144.826] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 144.826] Entry deleted from font path.
[ 144.826] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 144.826] Entry deleted from font path.
[ 144.826] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 144.826] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 144.826] Entry deleted from font path.
[ 144.826] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 144.826] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 144.826] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 144.826] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 144.826] (II) Loader magic: 0x811cc0
[ 144.826] (II) Module ABI versions:
[ 144.826] X.Org ANSI C Emulation: 0.4
[ 144.827] X.Org Video Driver: 15.0
[ 144.827] X.Org XInput driver : 20.0
[ 144.827] X.Org Server Extension : 8.0
[ 144.828] (--) PCI:*(0:0:1:0) 1002:9995:17aa:510a rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 144.828] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 144.833] Initializing built-in extension Generic Event Extension
[ 144.837] Initializing built-in extension SHAPE
[ 144.842] Initializing built-in extension MIT-SHM
[ 144.846] Initializing built-in extension XInputExtension
[ 144.850] Initializing built-in extension XTEST
[ 144.855] Initializing built-in extension BIG-REQUESTS
[ 144.859] Initializing built-in extension SYNC
[ 144.863] Initializing built-in extension XKEYBOARD
[ 144.867] Initializing built-in extension XC-MISC
[ 144.871] Initializing built-in extension SECURITY
[ 144.875] Initializing built-in extension XINERAMA
[ 144.878] Initializing built-in extension XFIXES
[ 144.882] Initializing built-in extension RENDER
[ 144.886] Initializing built-in extension RANDR
[ 144.889] Initializing built-in extension COMPOSITE
[ 144.893] Initializing built-in extension DAMAGE
[ 144.896] Initializing built-in extension MIT-SCREEN-SAVER
[ 144.899] Initializing built-in extension DOUBLE-BUFFER
[ 144.902] Initializing built-in extension RECORD
[ 144.906] Initializing built-in extension DPMS
[ 144.909] Initializing built-in extension Present
[ 144.911] Initializing built-in extension DRI3
[ 144.914] Initializing built-in extension X-Resource
[ 144.917] Initializing built-in extension XVideo
[ 144.920] Initializing built-in extension XVideo-MotionCompensation
[ 144.923] Initializing built-in extension XFree86-VidModeExtension
[ 144.925] Initializing built-in extension XFree86-DGA
[ 144.928] Initializing built-in extension XFree86-DRI
[ 144.930] Initializing built-in extension DRI2
[ 144.930] (II) "glx" will be loaded by default.
[ 144.930] (II) LoadModule: "glx"
[ 144.930] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 144.931] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 144.931] compiled for 6.9.0, module version = 1.0.0
[ 144.933] Loading extension GLX
[ 144.933] (II) LoadModule: "fglrx"
[ 144.933] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 144.953] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 144.953] compiled for 1.4.99.906, module version = 14.10.2
[ 144.953] Module class: X.Org Video Driver
[ 144.953] (II) Loading sub module "fglrxdrm"
[ 144.953] (II) LoadModule: "fglrxdrm"
[ 144.953] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 144.981] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 144.981] compiled for 1.4.99.906, module version = 14.10.2
[ 144.981] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 144.981] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001
[ 144.982] (II) AMD Proprietary Linux Driver Build Date: May 5 2014 21:38:38
[ 144.982] (++) using VT number 2
[ 144.982] (WW) Falling back to old probe method for fglrx
[ 145.046] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 145.049] ukiDynamicMajor: found major device number 251
[ 145.049] ukiDynamicMajor: found major device number 251
[ 145.049] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 145.049] ukiOpenDevice: node name is /dev/ati/card0
[ 145.049] ukiOpenDevice: open result is 9, (OK)
[ 145.406] ukiOpenByBusid: ukiOpenMinor returns 9
[ 145.407] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 145.493] (--) Chipset Supported AMD Graphics Processor (0x9995) found
[ 145.493] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 145.495] (II) fglrx(0): pEnt->device->identifier=0x17b11a0
[ 145.495] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 145.495] (II) Loading sub module "vgahw"
[ 145.495] (II) LoadModule: "vgahw"
[ 145.496] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 145.508] (II) Module vgahw: vendor="X.Org Foundation"
[ 145.508] compiled for 1.15.2, module version = 0.1.0
[ 145.508] ABI class: X.Org Video Driver, version 15.0
[ 145.509] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 145.509] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 145.509] (==) fglrx(0): Default visual is TrueColor
[ 145.509] (**) fglrx(0): Option "DPMS" "true"
[ 145.509] (==) fglrx(0): RGB weight 888
[ 145.509] (II) fglrx(0): Using 8 bits per RGB
[ 145.509] (==) fglrx(0): Buffer Tiling is ON
[ 145.510] (II) Loading sub module "fglrxdrm"
[ 145.510] (II) LoadModule: "fglrxdrm"
[ 145.510] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 145.510] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 145.510] compiled for 1.4.99.906, module version = 14.10.2
[ 145.513] ukiDynamicMajor: found major device number 251
[ 145.513] ukiDynamicMajor: found major device number 251
[ 145.513] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 145.513] ukiOpenDevice: node name is /dev/ati/card0
[ 145.513] ukiOpenDevice: open result is 11, (OK)
[ 145.513] ukiOpenByBusid: ukiOpenMinor returns 11
[ 145.513] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 145.513] (**) fglrx(0): NoAccel = NO
[ 145.513] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 145.513] (--) fglrx(0): Chipset: "AMD Radeon HD 8450G" (Chipset = 0x9995)
[ 145.513] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x510a)
[ 145.513] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 145.514] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 145.514] (--) fglrx(0): MMIO registers at 0xf0300000
[ 145.514] (--) fglrx(0): I/O port at 0x00003000
[ 145.514] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 145.530] (II) fglrx(0): ATIF platform detected
[ 145.536] (II) fglrx(0): AC Adapter is used
[ 145.556] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 145.560] (II) Loading sub module "vbe"
[ 145.560] (II) LoadModule: "vbe"
[ 145.560] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 145.561] (II) Module vbe: vendor="X.Org Foundation"
[ 145.561] compiled for 1.15.2, module version = 1.1.0
[ 145.561] ABI class: X.Org Video Driver, version 15.0
[ 145.565] (II) fglrx(0): VESA BIOS detected
[ 145.565] (II) fglrx(0): VESA VBE Version 3.0
[ 145.565] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 145.565] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 145.565] (II) fglrx(0): VESA VBE OEM Software Rev: 15.31
[ 145.565] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 145.565] (II) fglrx(0): VESA VBE OEM Product: DVST
[ 145.565] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 145.565] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 145.565] (--) fglrx(0): Video RAM: 786432 kByte, Type: DDR3
[ 145.565] (II) fglrx(0): PCIE card detected
[ 145.565] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 145.565] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 145.565] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x30000000)
[ 145.566] (II) fglrx(0): RandR 1.2 support is enabled!
[ 145.566] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 145.566] (II) Loading sub module "fb"
[ 145.566] (II) LoadModule: "fb"
[ 145.566] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 145.567] (II) Module fb: vendor="X.Org Foundation"
[ 145.567] compiled for 1.15.2, module version = 1.0.0
[ 145.567] ABI class: X.Org ANSI C Emulation, version 0.4
[ 145.567] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 145.567] (II) Loading sub module "ddc"
[ 145.567] (II) LoadModule: "ddc"
[ 145.567] (II) Module "ddc" already built-in
[ 145.714] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 145.714] (II) fglrx(0): Output DFP1 has no monitor section
[ 145.714] (II) fglrx(0): Output CRT1 has no monitor section
[ 145.714] (II) Loading sub module "ddc"
[ 145.714] (II) LoadModule: "ddc"
[ 145.714] (II) Module "ddc" already built-in
[ 145.714] (II) fglrx(0): Connected Display0: LVDS
[ 145.714] (II) fglrx(0): Display0 EDID data ---------------------------
[ 145.714] (II) fglrx(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 145.714] (II) fglrx(0): Year: 2011 Week: 0
[ 145.714] (II) fglrx(0): EDID Version: 1.3
[ 145.714] (II) fglrx(0): Digital Display Input
[ 145.714] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 145.714] (II) fglrx(0): Gamma: 2.20
[ 145.714] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 145.714] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 145.714] (II) fglrx(0): First detailed timing is preferred mode
[ 145.714] (II) fglrx(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 145.714] (II) fglrx(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 145.715] (II) fglrx(0): Manufacturer's mask: 0
[ 145.715] (II) fglrx(0): Supported detailed timing:
[ 145.715] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 145.715] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 145.715] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 145.715] (II) fglrx(0): Supported detailed timing:
[ 145.715] (II) fglrx(0): clock: 57.8 MHz Image Size: 344 x 193 mm
[ 145.715] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 145.715] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 145.715] (II) fglrx(0): Unknown vendor-specific block f
[ 145.715] (II) fglrx(0): N156BGE-L11
[ 145.715] (II) fglrx(0): EDID (in hex):
[ 145.715] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[ 145.715] (II) fglrx(0): 0015010380231378ea00259e57529929
[ 145.715] (II) fglrx(0): 15505400000001010101010101010101
[ 145.715] (II) fglrx(0): 010101010101121b5664500014301022
[ 145.715] (II) fglrx(0): 260058c1100000189116566450001430
[ 145.715] (II) fglrx(0): 1022260058c1100000180000000f008c
[ 145.715] (II) fglrx(0): 09328c09321609000daea915000000fe
[ 145.715] (II) fglrx(0): 004e3135364247452d4c31310a20007e
[ 145.715] (II) fglrx(0): End of Display0 EDID data --------------------
[ 145.715] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 145.715] (II) fglrx(0): EDID for output LVDS
[ 145.715] (II) fglrx(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 145.715] (II) fglrx(0): Year: 2011 Week: 0
[ 145.715] (II) fglrx(0): EDID Version: 1.3
[ 145.715] (II) fglrx(0): Digital Display Input
[ 145.715] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 145.715] (II) fglrx(0): Gamma: 2.20
[ 145.715] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 145.715] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 145.715] (II) fglrx(0): First detailed timing is preferred mode
[ 145.715] (II) fglrx(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 145.715] (II) fglrx(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 145.715] (II) fglrx(0): Manufacturer's mask: 0
[ 145.715] (II) fglrx(0): Supported detailed timing:
[ 145.715] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 145.715] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 145.715] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 145.715] (II) fglrx(0): Supported detailed timing:
[ 145.715] (II) fglrx(0): clock: 57.8 MHz Image Size: 344 x 193 mm
[ 145.715] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 145.715] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 145.715] (II) fglrx(0): Unknown vendor-specific block f
[ 145.715] (II) fglrx(0): N156BGE-L11
[ 145.715] (II) fglrx(0): EDID (in hex):
[ 145.715] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[ 145.716] (II) fglrx(0): 0015010380231378ea00259e57529929
[ 145.716] (II) fglrx(0): 15505400000001010101010101010101
[ 145.716] (II) fglrx(0): 010101010101121b5664500014301022
[ 145.716] (II) fglrx(0): 260058c1100000189116566450001430
[ 145.716] (II) fglrx(0): 1022260058c1100000180000000f008c
[ 145.716] (II) fglrx(0): 09328c09321609000daea915000000fe
[ 145.716] (II) fglrx(0): 004e3135364247452d4c31310a20007e
[ 145.716] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[ 145.716] (II) fglrx(0): Printing DDC gathered Modelines:
[ 145.716] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 145.716] (II) fglrx(0): Modeline "1366x768"x0.0 57.77 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Printing probed modes for output LVDS
[ 145.716] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 145.716] (II) fglrx(0): Modeline "1366x768"x50.0 57.77 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1360x768"x60.0 69.30 1360 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1360x768"x50.0 57.77 1360 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1280x768"x50.0 57.77 1280 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1382 1416 1466 720 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1280x720"x50.0 57.77 1280 1382 1416 1466 720 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)The short answer here is this: https://bbs.archlinux.org/viewtopic.php … 9#p1404629 ... some weird incompatibility w/ the catalyst drivers w/ latest gnome... had I really been paying attention to the wiki, I'd have known this. Oh well, it's worth the extra performance to me to use startx. Thanks all for watching. Nothing more to see here.
-
After pacman -Syu upgrade xfce boots black screen cursor
Hello,
I've recently upgraded the system with pacman -Syu and it seem something has gone wrong with new xfce 4.12. I have changed DM from slim to lxdm and can only boot to openbox but not xfce. I also switch to tty2 and try a startx with ~/.xinitrc file with exec startxfce4 but it does not launch properly. What I mean is both the display manager and a startx boots me into a black screen with a cursor when i try to launch xfce. Again I can boot to openbox just fine. I've searched for similar topics but cant seem to find any solution. Can anyone help?
[ 18.673]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.673] X Protocol Version 11, Revision 0
[ 18.673] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.673] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
[ 18.674] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
[ 18.674] Build Date: 14 March 2015 06:45:50PM
[ 18.674]
[ 18.674] Current version of pixman: 0.32.6
[ 18.674] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 18.674] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.674] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 17 03:38:39 2015
[ 18.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.047] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.553] (==) No Layout section. Using the first Screen section.
[ 19.553] (**) |-->Screen "Default Screen" (0)
[ 19.553] (**) | |-->Monitor "<default monitor>"
[ 19.586] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 19.586] (==) Automatically adding devices
[ 19.586] (==) Automatically enabling devices
[ 19.586] (==) Automatically adding GPU devices
[ 20.294] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 20.294] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.294] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.354] (II) Loader magic: 0x815d80
[ 20.354] (II) Module ABI versions:
[ 20.354] X.Org ANSI C Emulation: 0.4
[ 20.354] X.Org Video Driver: 19.0
[ 20.354] X.Org XInput driver : 21.0
[ 20.354] X.Org Server Extension : 9.0
[ 20.356] (EE) systemd-logind: failed to get session: PID 940 does not belong to any known session
[ 20.357] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.359] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
[ 20.359] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.422] (II) "glx" will be loaded by default.
[ 20.423] (II) LoadModule: "vnc"
[ 20.568] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
[ 22.029] (II) Module vnc: vendor="Constantin Kaplinsky"
[ 22.029] compiled for 1.17.1, module version = 1.0.0
[ 22.029] Module class: X.Org Server Extension
[ 22.029] ABI class: X.Org Server Extension, version 9.0
[ 22.029] (II) LoadModule: "glx"
[ 22.030] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.054] (II) Module glx: vendor="X.Org Foundation"
[ 24.208] compiled for 1.17.1, module version = 1.0.0
[ 24.208] ABI class: X.Org Server Extension, version 9.0
[ 24.208] (==) AIGLX enabled
[ 24.208] (==) Matched ati as autoconfigured driver 0
[ 24.208] (==) Matched ati as autoconfigured driver 1
[ 24.208] (==) Matched modesetting as autoconfigured driver 2
[ 24.208] (==) Matched fbdev as autoconfigured driver 3
[ 24.208] (==) Matched vesa as autoconfigured driver 4
[ 24.208] (==) Assigned the driver to the xf86ConfigLayout
[ 24.208] (II) LoadModule: "ati"
[ 24.261] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 24.332] (II) Module ati: vendor="X.Org Foundation"
[ 24.332] compiled for 1.17.0, module version = 7.5.0
[ 24.332] Module class: X.Org Video Driver
[ 24.332] ABI class: X.Org Video Driver, version 19.0
[ 24.332] (II) LoadModule: "radeon"
[ 24.333] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 24.765] (II) Module radeon: vendor="X.Org Foundation"
[ 24.765] compiled for 1.17.0, module version = 7.5.0
[ 24.765] Module class: X.Org Video Driver
[ 24.765] ABI class: X.Org Video Driver, version 19.0
[ 24.765] (II) LoadModule: "modesetting"
[ 24.765] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.878] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.878] compiled for 1.17.1, module version = 1.17.1
[ 24.878] Module class: X.Org Video Driver
[ 24.878] ABI class: X.Org Video Driver, version 19.0
[ 24.878] (II) LoadModule: "fbdev"
[ 24.878] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.005] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.005] compiled for 1.17.0, module version = 0.4.4
[ 25.005] Module class: X.Org Video Driver
[ 25.005] ABI class: X.Org Video Driver, version 19.0
[ 25.005] (II) LoadModule: "vesa"
[ 25.006] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.099] (II) Module vesa: vendor="X.Org Foundation"
[ 25.099] compiled for 1.17.0, module version = 2.3.2
[ 25.099] Module class: X.Org Video Driver
[ 25.099] ABI class: X.Org Video Driver, version 19.0
[ 25.099] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 25.111] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 25.111] (II) FBDEV: driver for framebuffer: fbdev
[ 25.111] (II) VESA: driver for VESA chipsets: vesa
[ 25.111] (++) using VT number 7
[ 25.184] (II) [KMS] Kernel modesetting enabled.
[ 25.184] (WW) Falling back to old probe method for modesetting
[ 25.184] (WW) Falling back to old probe method for fbdev
[ 25.184] (II) Loading sub module "fbdevhw"
[ 25.184] (II) LoadModule: "fbdevhw"
[ 25.184] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.280] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.280] compiled for 1.17.1, module version = 0.0.2
[ 25.280] ABI class: X.Org Video Driver, version 19.0
[ 25.280] (WW) Falling back to old probe method for vesa
[ 25.280] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 25.280] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 25.280] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 25.280] (==) RADEON(0): Default visual is TrueColor
[ 25.280] (==) RADEON(0): RGB weight 888
[ 25.280] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 25.280] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
[ 25.280] (II) Loading sub module "dri2"
[ 25.280] (II) LoadModule: "dri2"
[ 25.280] (II) Module "dri2" already built-in
[ 25.280] (II) Loading sub module "exa"
[ 25.280] (II) LoadModule: "exa"
[ 25.281] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 25.406] (II) Module exa: vendor="X.Org Foundation"
[ 25.406] compiled for 1.17.1, module version = 2.6.0
[ 25.406] ABI class: X.Org Video Driver, version 19.0
[ 25.406] (II) RADEON(0): KMS Color Tiling: enabled
[ 25.406] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 25.406] (II) RADEON(0): KMS Pageflipping: enabled
[ 25.406] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 25.440] (II) RADEON(0): Output VGA-0 has no monitor section
[ 25.471] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 25.510] (II) RADEON(0): EDID for output VGA-0
[ 25.541] (II) RADEON(0): EDID for output HDMI-0
[ 25.541] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
[ 25.541] (II) RADEON(0): Year: 2012 Week: 0
[ 25.541] (II) RADEON(0): EDID Version: 1.3
[ 25.541] (II) RADEON(0): Digital Display Input
[ 25.541] (II) RADEON(0): DFP 1.x compatible TMDS
[ 25.541] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 25.541] (II) RADEON(0): Gamma: 2.20
[ 25.541] (II) RADEON(0): DPMS capabilities: Off
[ 25.541] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.541] (II) RADEON(0): First detailed timing is preferred mode
[ 25.541] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
[ 25.541] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
[ 25.541] (II) RADEON(0): Supported established timings:
[ 25.541] (II) RADEON(0): 720x400@70Hz
[ 25.541] (II) RADEON(0): 640x480@60Hz
[ 25.541] (II) RADEON(0): 640x480@67Hz
[ 25.541] (II) RADEON(0): 640x480@72Hz
[ 25.541] (II) RADEON(0): 640x480@75Hz
[ 25.541] (II) RADEON(0): 800x600@56Hz
[ 25.541] (II) RADEON(0): 800x600@60Hz
[ 25.541] (II) RADEON(0): 800x600@72Hz
[ 25.541] (II) RADEON(0): 800x600@75Hz
[ 25.541] (II) RADEON(0): 832x624@75Hz
[ 25.542] (II) RADEON(0): 1024x768@60Hz
[ 25.542] (II) RADEON(0): 1024x768@70Hz
[ 25.542] (II) RADEON(0): 1024x768@75Hz
[ 25.542] (II) RADEON(0): 1280x1024@75Hz
[ 25.542] (II) RADEON(0): 1152x864@75Hz
[ 25.542] (II) RADEON(0): Manufacturer's mask: 0
[ 25.542] (II) RADEON(0): Supported standard timings:
[ 25.542] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 25.542] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 25.542] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 25.542] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 25.542] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 25.542] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 25.542] (II) RADEON(0): Supported detailed timing:
[ 25.542] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
[ 25.542] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 25.542] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 25.542] (II) RADEON(0): Supported detailed timing:
[ 25.542] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
[ 25.542] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 25.542] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 25.542] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
[ 25.542] (II) RADEON(0): Monitor name: NS-20EM50A13
[ 25.542] (II) RADEON(0): EDID (in hex):
[ 25.542] (II) RADEON(0): 00ffffffffffff00085920bb01010101
[ 25.542] (II) RADEON(0): 00160103812c19782a3c25a554559f27
[ 25.542] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
[ 25.542] (II) RADEON(0): 81c0010101012f2640a060841a303020
[ 25.542] (II) RADEON(0): 3500baf91000001a662150b051001b30
[ 25.542] (II) RADEON(0): 40703600baf91000001e000000fd0037
[ 25.542] (II) RADEON(0): 4c1e520f000a202020202020000000fc
[ 25.542] (II) RADEON(0): 004e532d3230454d35304131330a00a6
[ 25.542] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 25.542] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 25.542] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 25.542] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 25.542] (II) RADEON(0): Output VGA-0 disconnected
[ 25.542] (II) RADEON(0): Output HDMI-0 connected
[ 25.542] (II) RADEON(0): Using exact sizes for initial modes
[ 25.542] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
[ 25.542] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.542] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
[ 25.542] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 25.542] (==) RADEON(0): DPI set to (96, 96)
[ 25.542] (II) Loading sub module "fb"
[ 25.542] (II) LoadModule: "fb"
[ 25.542] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.769] (II) Module fb: vendor="X.Org Foundation"
[ 25.769] compiled for 1.17.1, module version = 1.0.0
[ 25.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.769] (II) Loading sub module "ramdac"
[ 25.769] (II) LoadModule: "ramdac"
[ 25.769] (II) Module "ramdac" already built-in
[ 25.769] (II) UnloadModule: "modesetting"
[ 25.769] (II) Unloading modesetting
[ 25.769] (II) UnloadModule: "fbdev"
[ 25.769] (II) Unloading fbdev
[ 25.769] (II) UnloadSubModule: "fbdevhw"
[ 25.769] (II) Unloading fbdevhw
[ 25.769] (II) UnloadModule: "vesa"
[ 25.769] (II) Unloading vesa
[ 25.769] (--) Depth 24 pixmap format is 32 bpp
[ 25.818] (II) RADEON(0): [DRI2] Setup complete
[ 25.818] (II) RADEON(0): [DRI2] DRI driver: r600
[ 25.818] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 25.818] (II) RADEON(0): Front buffer size: 5652K
[ 25.818] (II) RADEON(0): VRAM usage limit set to 225496K
[ 25.853] (==) RADEON(0): Backing store enabled
[ 25.853] (II) RADEON(0): Direct rendering enabled
[ 25.853] (II) EXA(0): Driver allocated offscreen pixmaps
[ 25.853] (II) EXA(0): Driver registered support for the following operations:
[ 25.853] (II) Solid
[ 25.853] (II) Copy
[ 25.853] (II) Composite (RENDER acceleration)
[ 25.853] (II) UploadToScreen
[ 25.853] (II) DownloadFromScreen
[ 25.853] (II) RADEON(0): Acceleration enabled
[ 25.853] (==) RADEON(0): DPMS enabled
[ 25.853] (==) RADEON(0): Silken mouse enabled
[ 25.920] (II) RADEON(0): Set up textured video
[ 25.920] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 25.920] (II) RADEON(0): [XvMC] Extension initialized.
[ 25.920] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.100] (WW) RADEON(0): Option "PasswordFile" is not used
[ 26.100] (--) RandR disabled
[ 32.355] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 32.355] (II) AIGLX: enabled GLX_ARB_create_context
[ 32.355] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 32.355] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 32.355] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 32.355] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 32.355] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 32.355] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 32.355] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 32.357] (II) AIGLX: Loaded and initialized r600
[ 32.357] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 32.358] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 35.161] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 35.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.161] (**) Power Button: Applying InputClass "keyboard-layout"
[ 35.161] (II) LoadModule: "evdev"
[ 35.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.498] (II) Module evdev: vendor="X.Org Foundation"
[ 35.498] compiled for 1.16.2, module version = 2.9.1
[ 35.499] Module class: X.Org XInput Driver
[ 35.499] ABI class: X.Org XInput driver, version 21.0
[ 35.499] (II) Using input driver 'evdev' for 'Power Button'
[ 35.499] (**) Power Button: always reports core events
[ 35.499] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 35.499] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.499] (--) evdev: Power Button: Found keys
[ 35.499] (II) evdev: Power Button: Configuring as keyboard
[ 35.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 35.499] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 35.499] (**) Option "xkb_rules" "evdev"
[ 35.499] (**) Option "xkb_model" "pc104"
[ 35.499] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.975] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 35.975] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.975] (**) Power Button: Applying InputClass "keyboard-layout"
[ 35.975] (II) Using input driver 'evdev' for 'Power Button'
[ 35.975] (**) Power Button: always reports core events
[ 35.975] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 35.975] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.975] (--) evdev: Power Button: Found keys
[ 35.975] (II) evdev: Power Button: Configuring as keyboard
[ 35.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 35.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 35.975] (**) Option "xkb_rules" "evdev"
[ 35.975] (**) Option "xkb_model" "pc104"
[ 35.976] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.977] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
[ 35.977] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
[ 35.977] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
[ 35.978] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
[ 35.979] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
[ 35.979] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
[ 35.979] (II) No input driver specified, ignoring this device.
[ 35.979] (II) This device may have been added with another device file.
[ 35.980] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
[ 35.980] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.980] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.980] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.980] (**) Generic USB Keyboard: always reports core events
[ 35.980] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
[ 35.980] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 35.980] (--) evdev: Generic USB Keyboard: Found keys
[ 35.980] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 35.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:040B:2000.0004/input/input10/event7"
[ 35.980] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
[ 35.980] (**) Option "xkb_rules" "evdev"
[ 35.980] (**) Option "xkb_model" "pc104"
[ 35.980] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.981] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
[ 35.981] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.981] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.981] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.981] (**) Generic USB Keyboard: always reports core events
[ 35.981] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
[ 35.981] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 35.981] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
[ 35.981] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
[ 35.981] (--) evdev: Generic USB Keyboard: Found relative axes
[ 35.981] (--) evdev: Generic USB Keyboard: Found x and y relative axes
[ 35.981] (--) evdev: Generic USB Keyboard: Found keys
[ 35.981] (II) evdev: Generic USB Keyboard: Configuring as mouse
[ 35.981] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 35.981] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
[ 35.981] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
[ 35.981] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:040B:2000.0005/input/input11/event8"
[ 35.981] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
[ 35.981] (**) Option "xkb_rules" "evdev"
[ 35.981] (**) Option "xkb_model" "pc104"
[ 35.981] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.981] (II) evdev: Generic USB Keyboard: initialized for relative axes.
[ 35.981] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration profile 0
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
[ 35.982] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
[ 35.982] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.982] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.982] (**) Generic USB Keyboard: always reports core events
[ 35.982] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
[ 35.982] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
[ 36.060] (EE) PreInit returned 2 for "Generic USB Keyboard"
[ 36.060] (II) UnloadModule: "evdev"
[ 36.060] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
[ 36.060] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
[ 36.060] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
[ 36.060] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
[ 36.060] (**) HP Webcam HD-2200: always reports core events
[ 36.061] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
[ 36.061] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
[ 36.061] (--) evdev: HP Webcam HD-2200: Found keys
[ 36.061] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
[ 36.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input13/event10"
[ 36.061] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
[ 36.061] (**) Option "xkb_rules" "evdev"
[ 36.061] (**) Option "xkb_model" "pc104"
[ 36.061] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 36.062] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 36.062] (II) No input driver specified, ignoring this device.
[ 36.062] (II) This device may have been added with another device file.
[ 36.063] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 36.063] (II) No input driver specified, ignoring this device.
[ 36.063] (II) This device may have been added with another device file.
[ 36.063] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 36.063] (II) No input driver specified, ignoring this device.
[ 36.063] (II) This device may have been added with another device file.
[ 36.064] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
[ 36.064] (II) No input driver specified, ignoring this device.
[ 36.064] (II) This device may have been added with another device file.
[ 36.064] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
[ 36.064] (II) No input driver specified, ignoring this device.
[ 36.064] (II) This device may have been added with another device file.
[ 53.210] (II) RADEON(0): EDID vendor "BBY", prod id 47904
[ 53.210] (II) RADEON(0): Using EDID range info for horizontal sync
[ 53.210] (II) RADEON(0): Using EDID range info for vertical refresh
[ 53.210] (II) RADEON(0): Printing DDC gathered Modelines:
[ 53.210] (II) RADEON(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 53.210] (II) RADEON(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 53.210] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 62.870] (II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by mavo (2015-03-17 13:08:53)alphaniner wrote:The preferred way to test a 'default session' is with a clean non-root user. Logging in as root can hide other issues.
Ok i get that. Here is xorg log and journalctl -b log. I rebooted tried to login through lxdm and got the cursor and blank screen. I then tty3 and startx and launched into openbox to post these results. Still cannot get into xfce as normal user. Thoughts???
~.local/share/xorg/Xorg.1.log
[ 84.848]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 84.848] X Protocol Version 11, Revision 0
[ 84.848] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 84.848] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
[ 84.848] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
[ 84.848] Build Date: 14 March 2015 06:45:50PM
[ 84.849]
[ 84.849] Current version of pixman: 0.32.6
[ 84.849] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 84.849] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 84.850] (==) Log file: "/home/molmedo1/.local/share/xorg/Xorg.1.log", Time: Wed Mar 18 10:06:18 2015
[ 84.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 84.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 84.851] (==) No Layout section. Using the first Screen section.
[ 84.851] (**) |-->Screen "Default Screen" (0)
[ 84.851] (**) | |-->Monitor "<default monitor>"
[ 84.851] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 84.851] (==) Automatically adding devices
[ 84.851] (==) Automatically enabling devices
[ 84.851] (==) Automatically adding GPU devices
[ 84.851] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 84.851] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 84.851] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 84.851] (II) Loader magic: 0x815d80
[ 84.851] (II) Module ABI versions:
[ 84.851] X.Org ANSI C Emulation: 0.4
[ 84.851] X.Org Video Driver: 19.0
[ 84.851] X.Org XInput driver : 21.0
[ 84.851] X.Org Server Extension : 9.0
[ 84.856] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 84.856] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 84.857] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 84.859] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
[ 84.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 84.859] (II) "glx" will be loaded by default.
[ 84.859] (II) LoadModule: "vnc"
[ 84.860] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
[ 84.868] (II) Module vnc: vendor="Constantin Kaplinsky"
[ 84.868] compiled for 1.17.1, module version = 1.0.0
[ 84.868] Module class: X.Org Server Extension
[ 84.868] ABI class: X.Org Server Extension, version 9.0
[ 84.868] (II) LoadModule: "glx"
[ 84.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 84.870] (II) Module glx: vendor="X.Org Foundation"
[ 84.870] compiled for 1.17.1, module version = 1.0.0
[ 84.870] ABI class: X.Org Server Extension, version 9.0
[ 84.870] (==) AIGLX enabled
[ 84.870] (==) Matched ati as autoconfigured driver 0
[ 84.870] (==) Matched ati as autoconfigured driver 1
[ 84.870] (==) Matched modesetting as autoconfigured driver 2
[ 84.870] (==) Matched fbdev as autoconfigured driver 3
[ 84.870] (==) Matched vesa as autoconfigured driver 4
[ 84.870] (==) Assigned the driver to the xf86ConfigLayout
[ 84.870] (II) LoadModule: "ati"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 84.871] (II) Module ati: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 7.5.0
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "radeon"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 84.871] (II) Module radeon: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 7.5.0
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "modesetting"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 84.871] (II) Module modesetting: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.1, module version = 1.17.1
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "fbdev"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 84.871] (II) Module fbdev: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 0.4.4
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "vesa"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 84.871] (II) Module vesa: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 2.3.2
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 84.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 84.876] (II) FBDEV: driver for framebuffer: fbdev
[ 84.876] (II) VESA: driver for VESA chipsets: vesa
[ 84.876] (++) using VT number 3
[ 84.876] (--) controlling tty is VT number 3, auto-enabling KeepTty
[ 84.876] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 84.876] (II) [KMS] Kernel modesetting enabled.
[ 84.876] (WW) Falling back to old probe method for modesetting
[ 84.876] (WW) Falling back to old probe method for fbdev
[ 84.876] (II) Loading sub module "fbdevhw"
[ 84.876] (II) LoadModule: "fbdevhw"
[ 84.876] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 84.876] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 84.876] compiled for 1.17.1, module version = 0.0.2
[ 84.876] ABI class: X.Org Video Driver, version 19.0
[ 84.876] (WW) Falling back to old probe method for vesa
[ 84.876] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 84.876] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 84.876] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 84.876] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 84.876] (==) RADEON(0): Default visual is TrueColor
[ 84.876] (==) RADEON(0): RGB weight 888
[ 84.876] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 84.876] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
[ 84.876] (II) Loading sub module "dri2"
[ 84.876] (II) LoadModule: "dri2"
[ 84.876] (II) Module "dri2" already built-in
[ 84.876] (II) Loading sub module "exa"
[ 84.876] (II) LoadModule: "exa"
[ 84.877] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 84.877] (II) Module exa: vendor="X.Org Foundation"
[ 84.877] compiled for 1.17.1, module version = 2.6.0
[ 84.877] ABI class: X.Org Video Driver, version 19.0
[ 84.877] (II) RADEON(0): KMS Color Tiling: enabled
[ 84.877] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 84.877] (II) RADEON(0): KMS Pageflipping: enabled
[ 84.877] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 84.920] (II) RADEON(0): Output VGA-0 has no monitor section
[ 84.951] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 84.990] (II) RADEON(0): EDID for output VGA-0
[ 85.021] (II) RADEON(0): EDID for output HDMI-0
[ 85.021] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
[ 85.021] (II) RADEON(0): Year: 2012 Week: 0
[ 85.021] (II) RADEON(0): EDID Version: 1.3
[ 85.021] (II) RADEON(0): Digital Display Input
[ 85.021] (II) RADEON(0): DFP 1.x compatible TMDS
[ 85.021] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 85.021] (II) RADEON(0): Gamma: 2.20
[ 85.021] (II) RADEON(0): DPMS capabilities: Off
[ 85.021] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 85.021] (II) RADEON(0): First detailed timing is preferred mode
[ 85.021] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
[ 85.021] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
[ 85.021] (II) RADEON(0): Supported established timings:
[ 85.021] (II) RADEON(0): 720x400@70Hz
[ 85.021] (II) RADEON(0): 640x480@60Hz
[ 85.021] (II) RADEON(0): 640x480@67Hz
[ 85.021] (II) RADEON(0): 640x480@72Hz
[ 85.021] (II) RADEON(0): 640x480@75Hz
[ 85.021] (II) RADEON(0): 800x600@56Hz
[ 85.021] (II) RADEON(0): 800x600@60Hz
[ 85.021] (II) RADEON(0): 800x600@72Hz
[ 85.021] (II) RADEON(0): 800x600@75Hz
[ 85.021] (II) RADEON(0): 832x624@75Hz
[ 85.021] (II) RADEON(0): 1024x768@60Hz
[ 85.021] (II) RADEON(0): 1024x768@70Hz
[ 85.021] (II) RADEON(0): 1024x768@75Hz
[ 85.021] (II) RADEON(0): 1280x1024@75Hz
[ 85.021] (II) RADEON(0): 1152x864@75Hz
[ 85.021] (II) RADEON(0): Manufacturer's mask: 0
[ 85.021] (II) RADEON(0): Supported standard timings:
[ 85.021] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 85.021] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 85.021] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 85.021] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 85.021] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 85.021] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 85.021] (II) RADEON(0): Supported detailed timing:
[ 85.021] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
[ 85.021] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 85.021] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 85.021] (II) RADEON(0): Supported detailed timing:
[ 85.021] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
[ 85.021] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 85.021] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 85.021] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
[ 85.021] (II) RADEON(0): Monitor name: NS-20EM50A13
[ 85.021] (II) RADEON(0): EDID (in hex):
[ 85.021] (II) RADEON(0): 00ffffffffffff00085920bb01010101
[ 85.021] (II) RADEON(0): 00160103812c19782a3c25a554559f27
[ 85.021] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
[ 85.021] (II) RADEON(0): 81c0010101012f2640a060841a303020
[ 85.021] (II) RADEON(0): 3500baf91000001a662150b051001b30
[ 85.021] (II) RADEON(0): 40703600baf91000001e000000fd0037
[ 85.022] (II) RADEON(0): 4c1e520f000a202020202020000000fc
[ 85.022] (II) RADEON(0): 004e532d3230454d35304131330a00a6
[ 85.022] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 85.022] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 85.022] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 85.022] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 85.022] (II) RADEON(0): Output VGA-0 disconnected
[ 85.022] (II) RADEON(0): Output HDMI-0 connected
[ 85.022] (II) RADEON(0): Using exact sizes for initial modes
[ 85.022] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
[ 85.022] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 85.022] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
[ 85.022] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 85.022] (==) RADEON(0): DPI set to (96, 96)
[ 85.022] (II) Loading sub module "fb"
[ 85.022] (II) LoadModule: "fb"
[ 85.022] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 85.022] (II) Module fb: vendor="X.Org Foundation"
[ 85.022] compiled for 1.17.1, module version = 1.0.0
[ 85.022] ABI class: X.Org ANSI C Emulation, version 0.4
[ 85.022] (II) Loading sub module "ramdac"
[ 85.022] (II) LoadModule: "ramdac"
[ 85.022] (II) Module "ramdac" already built-in
[ 85.022] (II) UnloadModule: "modesetting"
[ 85.022] (II) Unloading modesetting
[ 85.022] (II) UnloadModule: "fbdev"
[ 85.022] (II) Unloading fbdev
[ 85.022] (II) UnloadSubModule: "fbdevhw"
[ 85.022] (II) Unloading fbdevhw
[ 85.022] (II) UnloadModule: "vesa"
[ 85.022] (II) Unloading vesa
[ 85.022] (--) Depth 24 pixmap format is 32 bpp
[ 85.023] (II) RADEON(0): [DRI2] Setup complete
[ 85.023] (II) RADEON(0): [DRI2] DRI driver: r600
[ 85.023] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 85.023] (II) RADEON(0): Front buffer size: 5652K
[ 85.023] (II) RADEON(0): VRAM usage limit set to 225496K
[ 85.023] (==) RADEON(0): Backing store enabled
[ 85.023] (II) RADEON(0): Direct rendering enabled
[ 85.023] (II) EXA(0): Driver allocated offscreen pixmaps
[ 85.023] (II) EXA(0): Driver registered support for the following operations:
[ 85.023] (II) Solid
[ 85.023] (II) Copy
[ 85.023] (II) Composite (RENDER acceleration)
[ 85.023] (II) UploadToScreen
[ 85.023] (II) DownloadFromScreen
[ 85.023] (II) RADEON(0): Acceleration enabled
[ 85.023] (==) RADEON(0): DPMS enabled
[ 85.023] (==) RADEON(0): Silken mouse enabled
[ 85.023] (II) RADEON(0): Set up textured video
[ 85.023] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 85.023] (II) RADEON(0): [XvMC] Extension initialized.
[ 85.023] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 85.023] (WW) RADEON(0): Option "PasswordFile" is not used
[ 85.023] (--) RandR disabled
[ 85.047] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 85.047] (II) AIGLX: enabled GLX_ARB_create_context
[ 85.047] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 85.047] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 85.047] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 85.047] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 85.047] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 85.047] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 85.047] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 85.048] (II) AIGLX: Loaded and initialized r600
[ 85.048] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 85.048] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 85.088] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 85.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 85.088] (**) Power Button: Applying InputClass "keyboard-layout"
[ 85.088] (II) LoadModule: "evdev"
[ 85.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 85.089] (II) Module evdev: vendor="X.Org Foundation"
[ 85.089] compiled for 1.16.2, module version = 2.9.1
[ 85.089] Module class: X.Org XInput Driver
[ 85.089] ABI class: X.Org XInput driver, version 21.0
[ 85.089] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
[ 85.090] (II) Using input driver 'evdev' for 'Power Button'
[ 85.090] (**) Power Button: always reports core events
[ 85.090] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 85.090] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 85.090] (--) evdev: Power Button: Found keys
[ 85.090] (II) evdev: Power Button: Configuring as keyboard
[ 85.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 85.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 85.090] (**) Option "xkb_rules" "evdev"
[ 85.090] (**) Option "xkb_model" "pc104"
[ 85.090] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.123] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 85.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 85.123] (**) Power Button: Applying InputClass "keyboard-layout"
[ 85.124] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
[ 85.124] (II) Using input driver 'evdev' for 'Power Button'
[ 85.124] (**) Power Button: always reports core events
[ 85.124] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 85.124] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 85.124] (--) evdev: Power Button: Found keys
[ 85.124] (II) evdev: Power Button: Configuring as keyboard
[ 85.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 85.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 85.124] (**) Option "xkb_rules" "evdev"
[ 85.124] (**) Option "xkb_model" "pc104"
[ 85.124] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.125] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
[ 85.125] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 15 paused 0
[ 85.125] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 85.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
[ 85.125] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
[ 85.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
[ 85.126] (II) No input driver specified, ignoring this device.
[ 85.126] (II) This device may have been added with another device file.
[ 85.126] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
[ 85.126] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 85.126] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.126] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 16 paused 0
[ 85.126] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.126] (**) Generic USB Keyboard: always reports core events
[ 85.126] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
[ 85.126] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 85.126] (--) evdev: Generic USB Keyboard: Found keys
[ 85.126] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 85.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:040B:2000.0004/input/input10/event7"
[ 85.126] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
[ 85.126] (**) Option "xkb_rules" "evdev"
[ 85.126] (**) Option "xkb_model" "pc104"
[ 85.126] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.127] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
[ 85.127] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 85.127] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.127] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
[ 85.127] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.127] (**) Generic USB Keyboard: always reports core events
[ 85.127] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
[ 85.127] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 85.127] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
[ 85.127] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
[ 85.127] (--) evdev: Generic USB Keyboard: Found relative axes
[ 85.127] (--) evdev: Generic USB Keyboard: Found x and y relative axes
[ 85.127] (--) evdev: Generic USB Keyboard: Found keys
[ 85.127] (II) evdev: Generic USB Keyboard: Configuring as mouse
[ 85.127] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 85.127] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
[ 85.127] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
[ 85.127] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 85.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:040B:2000.0005/input/input11/event8"
[ 85.127] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
[ 85.127] (**) Option "xkb_rules" "evdev"
[ 85.127] (**) Option "xkb_model" "pc104"
[ 85.127] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.128] (II) evdev: Generic USB Keyboard: initialized for relative axes.
[ 85.128] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration profile 0
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
[ 85.128] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
[ 85.128] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.128] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.128] (**) Generic USB Keyboard: always reports core events
[ 85.128] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
[ 85.128] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
[ 85.220] (EE) PreInit returned 2 for "Generic USB Keyboard"
[ 85.220] (II) UnloadModule: "evdev"
[ 85.220] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
[ 85.220] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
[ 85.220] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
[ 85.221] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 18 paused 0
[ 85.221] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
[ 85.221] (**) HP Webcam HD-2200: always reports core events
[ 85.221] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
[ 85.221] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
[ 85.221] (--) evdev: HP Webcam HD-2200: Found keys
[ 85.221] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
[ 85.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5:1.0/input/input13/event10"
[ 85.222] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
[ 85.222] (**) Option "xkb_rules" "evdev"
[ 85.222] (**) Option "xkb_model" "pc104"
[ 85.222] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.223] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 85.223] (II) No input driver specified, ignoring this device.
[ 85.223] (II) This device may have been added with another device file.
[ 85.223] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 85.223] (II) No input driver specified, ignoring this device.
[ 85.223] (II) This device may have been added with another device file.
[ 85.224] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 85.224] (II) No input driver specified, ignoring this device.
[ 85.224] (II) This device may have been added with another device file.
[ 85.224] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
[ 85.225] (II) No input driver specified, ignoring this device.
[ 85.225] (II) This device may have been added with another device file.
[ 85.225] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
[ 85.225] (II) No input driver specified, ignoring this device.
[ 85.225] (II) This device may have been added with another device file.
journalctl -b
Mar 18 10:05:02 arch-server kernel: 00000-9FFFF write-back
Mar 18 10:05:02 arch-server kernel: A0000-EFFFF uncachable
Mar 18 10:05:02 arch-server kernel: F0000-FFFFF write-protect
Mar 18 10:05:02 arch-server kernel: MTRR variable ranges enabled:
Mar 18 10:05:02 arch-server kernel: 0 base 000000000000 mask FFFF80000000 write-back
Mar 18 10:05:02 arch-server kernel: 1 base 000080000000 mask FFFFC0000000 write-back
Mar 18 10:05:02 arch-server kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
Mar 18 10:05:02 arch-server kernel: 3 disabled
Mar 18 10:05:02 arch-server kernel: 4 disabled
Mar 18 10:05:02 arch-server kernel: 5 disabled
Mar 18 10:05:02 arch-server kernel: 6 disabled
Mar 18 10:05:02 arch-server kernel: 7 disabled
Mar 18 10:05:02 arch-server kernel: TOM2: 0000000430000000 aka 17152M
Mar 18 10:05:03 arch-server kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mar 18 10:05:03 arch-server kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
Mar 18 10:05:03 arch-server kernel: e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
Mar 18 10:05:03 arch-server kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Mar 18 10:05:03 arch-server kernel: Scanning 1 areas for low memory corruption
Mar 18 10:05:03 arch-server kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Mar 18 10:05:03 arch-server kernel: Using GB pages for direct mapping
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x00000000-0x000fffff] page 4k
Mar 18 10:05:03 arch-server kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
Mar 18 10:05:03 arch-server kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
Mar 18 10:05:03 arch-server kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x41fe00000-0x41fffffff] page 2M
Mar 18 10:05:03 arch-server kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x41c000000-0x41fdfffff] page 2M
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x400000000-0x41bffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x400000000-0x41bffffff] page 2M
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00100000-0xcff8ffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x00100000-0x001fffff] page 4k
Mar 18 10:05:03 arch-server kernel: [mem 0x00200000-0x3fffffff] page 2M
Mar 18 10:05:03 arch-server kernel: [mem 0x40000000-0xbfffffff] page 1G
Mar 18 10:05:03 arch-server kernel: [mem 0xc0000000-0xcfdfffff] page 2M
Mar 18 10:05:03 arch-server kernel: [mem 0xcfe00000-0xcff8ffff] page 4k
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x100000000-0x3ffffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x100000000-0x3ffffffff] page 1G
Mar 18 10:05:03 arch-server kernel: RAMDISK: [mem 0x3784e000-0x37c1efff]
Mar 18 10:05:03 arch-server kernel: ACPI: RSDP 00000000000f8d00 000014 (v00 ACPIAM)
Mar 18 10:05:03 arch-server kernel: ACPI: RSDT 00000000cff90000 00003C (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: FACP 00000000cff90200 000084 (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/
Mar 18 10:05:03 arch-server kernel: ACPI: DSDT 00000000cff90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
Mar 18 10:05:03 arch-server kernel: ACPI: FACS 00000000cff9e000 000040
Mar 18 10:05:03 arch-server kernel: ACPI: APIC 00000000cff90390 00010C (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: MCFG 00000000cff904a0 00003C (v01 7641MS OEMMCFG 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: OEMB 00000000cff9e040 000072 (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: HPET 00000000cff9a660 000038 (v01 7641MS OEMHPET 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: SSDT 00000000cff9a6a0 000D40 (v01 A M I POWERNOW 00000001 AMD 00000001)
Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
Mar 18 10:05:03 arch-server kernel: No NUMA configuration found
Mar 18 10:05:03 arch-server kernel: Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
Mar 18 10:05:03 arch-server kernel: Initmem setup node 0 [mem 0x00000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: NODE_DATA [mem 0x41fff9000-0x41fffdfff]
Mar 18 10:05:03 arch-server kernel: [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fa00000-ffff88041f5fffff] on node 0
Mar 18 10:05:03 arch-server kernel: Zone ranges:
Mar 18 10:05:03 arch-server kernel: DMA [mem 0x00001000-0x00ffffff]
Mar 18 10:05:03 arch-server kernel: DMA32 [mem 0x01000000-0xffffffff]
Mar 18 10:05:03 arch-server kernel: Normal [mem 0x100000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: Movable zone start for each node
Mar 18 10:05:03 arch-server kernel: Early memory node ranges
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00001000-0x0009efff]
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00100000-0xcff8ffff]
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x100000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: On node 0 totalpages: 4128558
Mar 18 10:05:03 arch-server kernel: DMA zone: 64 pages used for memmap
Mar 18 10:05:03 arch-server kernel: DMA zone: 21 pages reserved
Mar 18 10:05:03 arch-server kernel: DMA zone: 3998 pages, LIFO batch:0
Mar 18 10:05:03 arch-server kernel: DMA32 zone: 13247 pages used for memmap
Mar 18 10:05:03 arch-server kernel: DMA32 zone: 847760 pages, LIFO batch:31
Mar 18 10:05:03 arch-server kernel: Normal zone: 51200 pages used for memmap
Mar 18 10:05:03 arch-server kernel: Normal zone: 3276800 pages, LIFO batch:31
Mar 18 10:05:03 arch-server kernel: ACPI: PM-Timer IO Port: 0x808
Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
Mar 18 10:05:03 arch-server kernel: IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ0 used by override.
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ2 used by override.
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ9 used by override.
Mar 18 10:05:03 arch-server kernel: Using ACPI (MADT) for SMP configuration information
Mar 18 10:05:03 arch-server kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
Mar 18 10:05:03 arch-server kernel: smpboot: Allowing 24 CPUs, 20 hotplug CPUs
Mar 18 10:05:03 arch-server kernel: nr_irqs_gsi: 40
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
Mar 18 10:05:03 arch-server kernel: e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
Mar 18 10:05:03 arch-server kernel: Booting paravirtualized kernel on bare hardware
Mar 18 10:05:03 arch-server kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:24 nr_node_ids:1
Mar 18 10:05:03 arch-server kernel: PERCPU: Embedded 27 pages/cpu @ffff88040f600000 s81664 r8192 d20736 u131072
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: s81664 r8192 d20736 u131072 alloc=1*2097152
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
Mar 18 10:05:03 arch-server kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4064026
Mar 18 10:05:03 arch-server kernel: Policy zone: Normal
Mar 18 10:05:03 arch-server kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
Mar 18 10:05:03 arch-server kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Mar 18 10:05:03 arch-server kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
Mar 18 10:05:03 arch-server kernel: Checking aperture...
Mar 18 10:05:03 arch-server kernel: No AGP bridge found
Mar 18 10:05:03 arch-server kernel: Node 0: aperture @ 0 size 32 MB
Mar 18 10:05:03 arch-server kernel: Your BIOS doesn't leave a aperture memory hole
Mar 18 10:05:03 arch-server kernel: Please enable the IOMMU option in the BIOS setup
Mar 18 10:05:03 arch-server kernel: This costs you 64 MB of RAM
Mar 18 10:05:03 arch-server kernel: Mapping aperture over 65536 KB of RAM @ c4000000
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Mar 18 10:05:03 arch-server kernel: Memory: 16106196K/16514232K available (5183K kernel code, 859K rwdata, 1640K rodata, 1128K init, 1300K bss, 408036K reserv
Mar 18 10:05:03 arch-server kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
Mar 18 10:05:03 arch-server kernel: Hierarchical RCU implementation.
Mar 18 10:05:03 arch-server kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=24.
Mar 18 10:05:03 arch-server kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
Mar 18 10:05:03 arch-server kernel: NR_IRQS:8448 nr_irqs:872 16
Mar 18 10:05:03 arch-server kernel: spurious 8259A interrupt: IRQ7.
Mar 18 10:05:03 arch-server kernel: Console: colour dummy device 80x25
Mar 18 10:05:03 arch-server kernel: console [tty0] enabled
Mar 18 10:05:03 arch-server kernel: allocated 66060288 bytes of page_cgroup
Mar 18 10:05:03 arch-server kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mar 18 10:05:03 arch-server kernel: hpet clockevent registered
Mar 18 10:05:03 arch-server kernel: tsc: Fast TSC calibration using PIT
Mar 18 10:05:03 arch-server kernel: tsc: Detected 4199.946 MHz processor
Mar 18 10:05:03 arch-server kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 8399.89 BogoMIPS (lpj=41999460)
Mar 18 10:05:03 arch-server kernel: pid_max: default: 32768 minimum: 301
Mar 18 10:05:03 arch-server kernel: ACPI: Core revision 20131218
Mar 18 10:05:03 arch-server kernel: ACPI: All ACPI Tables successfully acquired
Mar 18 10:05:03 arch-server kernel: Security Framework initialized
Mar 18 10:05:03 arch-server kernel: Yama: becoming mindful.
Mar 18 10:05:03 arch-server kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mar 18 10:05:03 arch-server kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mar 18 10:05:03 arch-server kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 18 10:05:03 arch-server kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys memory
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys devices
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys freezer
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys net_cls
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys blkio
Mar 18 10:05:03 arch-server kernel: tseg: 0000000000
Mar 18 10:05:03 arch-server kernel: CPU: Physical Processor ID: 0
Mar 18 10:05:03 arch-server kernel: CPU: Processor Core ID: 0
Mar 18 10:05:03 arch-server kernel: mce: CPU supports 7 MCE banks
Mar 18 10:05:03 arch-server kernel: LVT offset 1 assigned for vector 0xf9
Mar 18 10:05:03 arch-server kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Mar 18 10:05:03 arch-server kernel: Freeing SMP alternatives memory: 20K (ffffffff819f2000 - ffffffff819f7000)
Mar 18 10:05:03 arch-server kernel: ftrace: allocating 20141 entries in 79 pages
Mar 18 10:05:03 arch-server kernel: Switched APIC routing to physical flat.
Mar 18 10:05:03 arch-server kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 18 10:05:03 arch-server kernel: smpboot: CPU0: AMD FX(tm)-4170 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
Mar 18 10:05:03 arch-server kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
Mar 18 10:05:03 arch-server kernel: ... version: 0
Mar 18 10:05:03 arch-server kernel: ... bit width: 48
Mar 18 10:05:03 arch-server kernel: ... generic registers: 6
Mar 18 10:05:03 arch-server kernel: ... value mask: 0000ffffffffffff
Mar 18 10:05:03 arch-server kernel: ... max period: 00007fffffffffff
Mar 18 10:05:03 arch-server kernel: ... fixed-purpose events: 0
Mar 18 10:05:03 arch-server kernel: ... event mask: 000000000000003f
Mar 18 10:05:03 arch-server kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Mar 18 10:05:03 arch-server kernel: x86: Booting SMP configuration:
Mar 18 10:05:03 arch-server kernel: .... node #0, CPUs: #1 #2 #3
Mar 18 10:05:03 arch-server kernel: x86: Booted up 1 node, 4 CPUs
Mar 18 10:05:03 arch-server kernel: smpboot: Total of 4 processors activated (33599.56 BogoMIPS)
Mar 18 10:05:03 arch-server kernel: devtmpfs: initialized
Mar 18 10:05:03 arch-server kernel: PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
Mar 18 10:05:03 arch-server kernel: pinctrl core: initialized pinctrl subsystem
Mar 18 10:05:03 arch-server kernel: RTC time: 15:04:53, date: 03/18/15
Mar 18 10:05:03 arch-server kernel: NET: Registered protocol family 16
Mar 18 10:05:03 arch-server kernel: cpuidle: using governor ladder
Mar 18 10:05:03 arch-server kernel: cpuidle: using governor menu
Mar 18 10:05:03 arch-server kernel: ACPI: bus type PCI registered
Mar 18 10:05:03 arch-server kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mar 18 10:05:03 arch-server kernel: PCI: not using MMCONFIG
Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for base access
Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for extended access
Mar 18 10:05:03 arch-server kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Mar 18 10:05:03 arch-server kernel: mtrr: probably your BIOS does not setup all CPUs.
Mar 18 10:05:03 arch-server kernel: mtrr: corrected configuration.
Mar 18 10:05:03 arch-server kernel: bio: create slab <bio-0> at 0
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Module Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Aggregator Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Executed 4 blocks of module-level executable AML code
Mar 18 10:05:03 arch-server kernel: ACPI: Interpreter enabled
Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
Mar 18 10:05:03 arch-server kernel: ACPI: (supports S0 S1 S4 S5)
Mar 18 10:05:03 arch-server kernel: ACPI: Using IOAPIC for interrupt routing
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Mar 18 10:05:03 arch-server kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mar 18 10:05:03 arch-server kernel: ACPI: No dock devices found.
Mar 18 10:05:03 arch-server kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Mar 18 10:05:03 arch-server kernel: PCI host bridge to bus 0000:00
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
Mar 18 10:05:03 arch-server kernel: pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: set SATA to AHCI mode
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: supports D1 D2
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: System wakeup disabled by ACP -
Keyboard not working after suspend to ram
Hi,
I have this problem since I have my notebook. Is a sony vaio cs.
After suspend to ram the keyboard does't work.
I've read in other forums that is a general gnu/linux problem, not only arch, and I think is related with the i8042 driver and generally hp pavillions have it.
cat /var/log/pm-suspend.log:
Initial commandline parameters: --quirk-dpms-suspend
--quirk-dpms-on
--quirk-vbestate-restore
--quirk-vbemode-restore
--quirk-vga-mode3
--quirk-vbe-post
Thu Aug 13 22:39:47 UYT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux vaio 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
Module Size Used by
i915 206216 1
drm 190080 2 i915
i2c_algo_bit 6996 1 i915
joydev 13312 0
snd_hda_codec_realtek 278132 1
btusb 15364 0
bluetooth 65668 1 btusb
fan 5656 0
uvcvideo 68316 0
videodev 42048 1 uvcvideo
v4l1_compat 18228 2 uvcvideo,videodev
v4l2_compat_ioctl32 10992 1 videodev
arc4 2192 2
vboxdrv 1723308 0
ecb 3536 2
snd_seq_dummy 3540 0
cpufreq_powersave 1872 2
sdhci_pci 9200 0
sdhci 20116 1 sdhci_pci
snd_seq_oss 36224 0
snd_hda_intel 31208 2
snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
iwlagn 108980 0
snd_seq_midi_event 8592 1 snd_seq_oss
snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8324 3 snd_seq_dummy,snd_seq_oss,snd_seq
cpufreq_ondemand 9256 0
mmc_core 61984 1 sdhci
snd_hwdep 9976 1 snd_hda_codec
iwlcore 112976 1 iwlagn
snd_pcm_oss 47328 0
snd_mixer_oss 20976 1 snd_pcm_oss
snd_pcm 90872 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
mac80211 211296 2 iwlagn,iwlcore
ohci1394 34180 0
sony_laptop 35224 0
psmouse 60404 0
snd_timer 25344 2 snd_seq,snd_pcm
uhci_hcd 27056 0
ehci_hcd 40668 0
i2c_i801 11632 0
acpi_cpufreq 10272 0
led_class 5112 2 sdhci,iwlcore
battery 14072 0
ieee1394 98880 1 ohci1394
rfkill 13108 5 iwlcore,sony_laptop
thermal 17712 0
video 24268 1 i915
output 3792 1 video
serio_raw 7188 0
snd 76744 15 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 8576 1 snd
snd_page_alloc 10784 2 snd_hda_intel,snd_pcm
cfg80211 78120 3 iwlagn,iwlcore,mac80211
pcspkr 3088 0
intel_agp 33104 1
usbcore 179376 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
i2c_core 26816 4 i915,drm,i2c_algo_bit,i2c_i801
ac 5720 0
sky2 56820 0
button 7216 0
sg 33824 0
freq_table 4528 2 cpufreq_ondemand,acpi_cpufreq
iTCO_wdt 13648 0
iTCO_vendor_support 3828 1 iTCO_wdt
evdev 12928 14
processor 42064 3 acpi_cpufreq
rtc_cmos 13592 0
rtc_core 22212 1 rtc_cmos
rtc_lib 3120 1 rtc_core
ext4 256304 2
mbcache 8980 1 ext4
jbd2 69088 1 ext4
crc16 2096 1 ext4
sr_mod 19460 0
sd_mod 30696 4
cdrom 41288 1 sr_mod
ahci 40992 3
libata 192460 1 ahci
scsi_mod 131736 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 3907796 1913868 1993928 0 65068 1566872
-/+ buffers/cache: 281928 3625868
Swap: 2441872 0 2441872
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/etc/pm/sleep.d/99laptop-mode suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Thu Aug 13 22:39:50 UYT 2009: performing suspend
Thu Aug 13 22:40:10 UYT 2009: Awake.
Thu Aug 13 22:40:10 UYT 2009: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
/etc/pm/sleep.d/99laptop-mode resume suspend: success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55wicd resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
Thu Aug 13 22:40:13 UYT 2009: Finished.
Please ask me for more info if needed.I had this issue for almost a year with my Sony CS190. After a clean install, it still exists. So,
After suspending the keyboard doesn't work, and unbinding/binding i8042 only helps touchpad, not keyboard.
EDIT: PS: Keyboard & Touchpad work fine after hibernate.
cat /var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
Build Date: 04 September 2009 03:37:03PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 4 11:01:41 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xec0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
(--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "false"
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(II) intel(0): Output VGA1 using monitor section Monitor0
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Disabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/hal: Adding input device Sony Vaio Keys
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event10"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event5"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
(II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
(II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
(II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
(II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event3"
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device UVC Camera (05ca:183f)
(**) UVC Camera (05ca:183f): always reports core events
(**) UVC Camera (05ca:183f): Device: "/dev/input/event2"
(II) UVC Camera (05ca:183f): Found keys
(II) UVC Camera (05ca:183f): Configuring as keyboard
(II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event8"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event13"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event7"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) intel(0): Allocate new frame buffer 1024x768 stride 1024
(II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) config/hal: removing device AT Translated Set 2 keyboard
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): Allocate new frame buffer 2960x800 stride 3072
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): Allocate new frame buffer 2960x800 stride 3072
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: removing device Sony Vaio Keys
(II) Sony Vaio Keys: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Sony Vaio Keys
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event10"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Raw Set 2 keyboard
(**) AT Raw Set 2 keyboard: always reports core events
(**) AT Raw Set 2 keyboard: Device: "/dev/input/event12"
(II) AT Raw Set 2 keyboard: Found keys
(II) AT Raw Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: removing device AT Raw Set 2 keyboard
(II) AT Raw Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
(II) Logitech VoIP USB Dual RF Receiver: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
(II) Logitech VoIP USB Dual RF Receiver: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event3"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event5"
(II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
(II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
(II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
(II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
cat /var/log/kernel.log
Oct 4 13:33:04 ArchTiger kernel: PM: Syncing filesystems ... done.
Oct 4 13:33:04 ArchTiger kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
Oct 4 13:33:04 ArchTiger kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Oct 4 13:33:04 ArchTiger kernel: Suspending console(s) (use no_console_suspend to debug)
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Stopping disk
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Oct 4 13:33:04 ArchTiger kernel: ACPI: Preparing to enter system sleep state S3
Oct 4 13:33:04 ArchTiger kernel: Disabling non-boot CPUs ...
Oct 4 13:33:04 ArchTiger kernel: CPU 1 is now offline
Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to UP code
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU1 is down
Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#0.
Oct 4 13:33:04 ArchTiger kernel: Back to C!
Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
Oct 4 13:33:04 ArchTiger kernel: Enabling non-boot CPUs ...
Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to SMP code
Oct 4 13:33:04 ArchTiger kernel: Booting processor 1 APIC 0x1 ip 0x6000
Oct 4 13:33:04 ArchTiger kernel: Initializing CPU#1
Oct 4 13:33:04 ArchTiger kernel: Calibrating delay using timer specific routine.. 5059.62 BogoMIPS (lpj=8429792)
Oct 4 13:33:04 ArchTiger kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 4 13:33:04 ArchTiger kernel: CPU: L2 cache: 6144K
Oct 4 13:33:04 ArchTiger kernel: CPU: Physical Processor ID: 0
Oct 4 13:33:04 ArchTiger kernel: CPU: Processor Core ID: 1
Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#1.
Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 4 13:33:04 ArchTiger kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: Switched to high resolution mode on CPU 1
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching sched-domain:
Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:04 ArchTiger kernel: groups: 0 1
Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching sched-domain:
Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:04 ArchTiger kernel: groups: 1 0
Oct 4 13:33:04 ArchTiger kernel: CPU1 is up
Oct 4 13:33:04 ArchTiger kernel: ACPI: Waking up from system sleep state S3
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd670d570)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd450d360)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x50400)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd350d350)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd5700004)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4600004)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3500900)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x4 (was 0x0, writing 0xd3500800)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:02.1: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb3: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb4: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb5: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb6: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb7: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: Radio Frequency Kill Switch is On:
Oct 4 13:33:04 ArchTiger kernel: Kill switch must be turned off for wireless networking to work.
Oct 4 13:33:04 ArchTiger kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d3500000-d35007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: Will use DMA mode even though HW doesn't fully claim to support it.
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Starting disk
Oct 4 13:33:04 ArchTiger kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:04 ArchTiger kernel: ata1.00: configured for UDMA/133
Oct 4 13:33:04 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.1 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.2 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: Restarting tasks ... <6>usb 5-1: USB disconnect, address 2
Oct 4 13:33:04 ArchTiger kernel: usb 5-1.1: USB disconnect, address 3
Oct 4 13:33:04 ArchTiger kernel: done.
Oct 4 13:33:04 ArchTiger kernel: usb 5-1.2: USB disconnect, address 4
Oct 4 13:33:05 ArchTiger kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: sky2 eth0: enabling interface
Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 4 13:33:05 ArchTiger kernel: iwlagn 0000:03:00.0: Radio disabled by HW RF Kill switch
Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 4 13:33:05 ArchTiger kernel: wlan0: Failed to config new BSSID to the low-level driver
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 1
Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching NULL sched-domain.
Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching sched-domain:
Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:05 ArchTiger kernel: groups: 0 1
Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching sched-domain:
Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:05 ArchTiger kernel: groups: 1 0
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 2
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 3
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 timed out
Oct 4 13:33:06 ArchTiger kernel: psmouse serio22: ID: 10 00 64
Oct 4 13:33:06 ArchTiger kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Oct 4 13:33:06 ArchTiger kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 4 13:33:07 ArchTiger kernel: input: PS/2 Generic Mouse as /devices/platform/i8042/serio22/input/input23
Oct 4 13:33:07 ArchTiger kernel: Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
Oct 4 13:33:07 ArchTiger kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio24/input/input24
Oct 4 13:33:08 ArchTiger kernel: ata2.00: qc timeout (cmd 0xef)
Oct 4 13:33:08 ArchTiger kernel: ata2.00: failed to set xfermode (err_mask=0x4)
Oct 4 13:33:09 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:09 ArchTiger kernel: ata2.00: configured for UDMA/33
Oct 4 13:33:09 ArchTiger kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x18 t4
Oct 4 13:33:09 ArchTiger kernel: ata2: irq_stat 0x40000001
Oct 4 13:33:09 ArchTiger kernel: ata2: EH complete
Oct 4 13:33:10 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:33:17 ArchTiger kernel: eth0: no IPv6 routers present
Oct 4 13:33:29 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
Oct 4 13:33:30 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:33:32 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:34:04 ArchTiger kernel: usb 5-1: new full speed USB device using uhci_hcd and address 5
Oct 4 13:34:04 ArchTiger kernel: usb 5-1: configuration #1 chosen from 1 choice
Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: USB hub found
Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: 2 ports detected
Oct 4 13:34:04 ArchTiger kernel: usb 5-1.1: new full speed USB device using uhci_hcd and address 6
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.1: configuration #1 chosen from 1 choice
Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input25
Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input0
Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input26
Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input1
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: new full speed USB device using uhci_hcd and address 7
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: configuration #1 chosen from 1 choice
cat /var/log/pm-suspend.log
Initial commandline parameters:
Sun Oct 4 13:34:08 EDT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz GenuineIntel GNU/Linux
Module Size Used by
sony_laptop 29520 0
vboxdrv 134376 0
ipv6 277876 14
fuse 60896 2
fan 4392 0
msr 3240 0
cpufreq_ondemand 7672 2
acpi_cpufreq 8624 0
freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
snd_seq_dummy 2696 0
snd_seq_oss 31168 0
snd_seq_midi_event 7012 1 snd_seq_oss
snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
arc4 1732 2
ecb 2788 2
iwlagn 95208 0
sdhci_pci 7300 0
sdhci 17128 1 sdhci_pci
iwlcore 96132 1 iwlagn
mac80211 182976 2 iwlagn,iwlcore
snd_pcm_oss 40352 0
ohci1394 30196 0
mmc_core 52704 1 sdhci
snd_mixer_oss 17540 1 snd_pcm_oss
led_class 3976 2 sdhci,iwlcore
ieee1394 85324 1 ohci1394
battery 10984 0
ac 4360 0
cfg80211 67364 3 iwlagn,iwlcore,mac80211
rfkill 10640 5 sony_laptop,iwlcore
thermal 13888 0
button 5556 0
snd_hda_codec_realtek 206568 1
snd_usb_audio 86304 3
snd_usb_lib 17252 1 snd_usb_audio
snd_rawmidi 21856 1 snd_usb_lib
snd_seq_device 6768 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
i915 184872 2
processor 35864 3 acpi_cpufreq
joydev 10400 0
drm 154656 2 i915
snd_hda_intel 26664 2
snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7656 2 snd_usb_audio,snd_hda_codec
snd_pcm 73512 6 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_timer 21100 2 snd_seq,snd_pcm
snd 58436 21 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
usbhid 40608 0
hid 42496 1 usbhid
i2c_algo_bit 5864 1 i915
uvcvideo 61040 0
videodev 36544 1 uvcvideo
v4l1_compat 15688 2 uvcvideo,videodev
video 19832 1 i915
btusb 12632 0
bluetooth 56676 1 btusb
output 2884 1 video
psmouse 59644 0
i2c_i801 9656 0
i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
intel_agp 27484 1
agpgart 32756 2 drm,intel_agp
sg 27928 0
iTCO_wdt 10952 0
iTCO_vendor_support 3080 1 iTCO_wdt
serio_raw 5704 0
bridge 54008 0
sky2 47240 0
evdev 10176 19
stp 2088 1 bridge
llc 5552 2 bridge,stp
tun 13572 0
soundcore 6784 1 snd
rtc_cmos 11212 0
rtc_core 18048 1 rtc_cmos
rtc_lib 2500 1 rtc_core
ext3 134380 3
jbd 48504 1 ext3
mbcache 7080 1 ext3
sr_mod 16612 0
cdrom 36032 1 sr_mod
sd_mod 27328 5
uhci_hcd 23540 0
ehci_hcd 36112 0
usbcore 150160 8 snd_usb_audio,snd_usb_lib,usbhid,uvcvideo,btusb,uhci_hcd,ehci_hcd
ahci 34004 4
libata 168044 1 ahci
scsi_mod 110708 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 2980024 2880848 99176 0 108764 2400148
-/+ buffers/cache: 371936 2608088
Swap: 1052216 0 1052216
success.
Let me know, if you need any other output.
Thanks
Last edited by Sir_Leon (2009-10-04 17:56:47) -
Bizarre X behaviour after boot
Hello,
I've recently done a fresh install on a new desktop, encrypted root with btrfs. I've installed minimal packages: base base-devel, xorg-server, xorg-xinit, xf86-video-nouveau, xf86-input-evdev, awesome, firefox and urxvt. Everything boots up fine, no errors.
When I startx (as a user and with a skel .xinitrc), the window manager loads and everything appears to be ok. However, launching firefox the UI becomes semi-unresponsive (I can't click any buttons, enter a URL etc.), but if I restart X everything works fine. I've also tried with openbox (nstead of awesome) and the same problem occurs - I can open a menu, launch firefox and shortly after the UI becomes semi-unresponsive, including the Openbox UI. I am just using firefox as an example, even loading just a urxvt will cause similar behaviour.
systemctl status shows no failed services
journalctl shows no errors
My initial thoughts were something with dbus was not configured correctly. But I've exhausted the dbus and systemd wikis and everything appears to be correct.
Xorg.0.log (on boot, semi-unresponsive)
[ 14.755]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 14.755] X Protocol Version 11, Revision 0
[ 14.755] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 14.755] Current Operating System: Linux wasteland 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64
[ 14.755] Kernel command line: vmlinuz-linux initrd=initramfs-linux.img root=/dev/mapper/root cryptdevice=/dev/sda2:root:allow-discards ro
[ 14.755] Build Date: 09 January 2014 08:47:24AM
[ 14.755]
[ 14.755] Current version of pixman: 0.32.4
[ 14.755] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.755] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.755] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 17 14:30:38 2014
[ 14.756] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14.756] (==) No Layout section. Using the first Screen section.
[ 14.756] (==) No screen section available. Using defaults.
[ 14.756] (**) |-->Screen "Default Screen Section" (0)
[ 14.756] (**) | |-->Monitor "<default monitor>"
[ 14.756] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14.756] (==) Automatically adding devices
[ 14.756] (==) Automatically enabling devices
[ 14.756] (==) Automatically adding GPU devices
[ 14.757] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14.757] Entry deleted from font path.
[ 14.758] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 14.758] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.758] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.758] (II) Loader magic: 0x804c80
[ 14.758] (II) Module ABI versions:
[ 14.758] X.Org ANSI C Emulation: 0.4
[ 14.758] X.Org Video Driver: 15.0
[ 14.758] X.Org XInput driver : 20.0
[ 14.758] X.Org Server Extension : 8.0
[ 14.758] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14.758] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 14.759] (--) PCI:*(0:1:0:0) 10de:0e22:1458:34fc rev 161, Mem @ 0xf4000000/33554432, 0xe8000000/134217728, 0xf0000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 14.759] (--) PCI: (0:2:0:0) 10de:0e22:1458:34fc rev 161, Mem @ 0xe4000000/33554432, 0xd8000000/134217728, 0xe0000000/67108864, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 14.759] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14.759] Initializing built-in extension Generic Event Extension
[ 14.759] Initializing built-in extension SHAPE
[ 14.759] Initializing built-in extension MIT-SHM
[ 14.759] Initializing built-in extension XInputExtension
[ 14.759] Initializing built-in extension XTEST
[ 14.759] Initializing built-in extension BIG-REQUESTS
[ 14.759] Initializing built-in extension SYNC
[ 14.759] Initializing built-in extension XKEYBOARD
[ 14.759] Initializing built-in extension XC-MISC
[ 14.759] Initializing built-in extension SECURITY
[ 14.759] Initializing built-in extension XINERAMA
[ 14.759] Initializing built-in extension XFIXES
[ 14.759] Initializing built-in extension RENDER
[ 14.759] Initializing built-in extension RANDR
[ 14.759] Initializing built-in extension COMPOSITE
[ 14.759] Initializing built-in extension DAMAGE
[ 14.759] Initializing built-in extension MIT-SCREEN-SAVER
[ 14.759] Initializing built-in extension DOUBLE-BUFFER
[ 14.759] Initializing built-in extension RECORD
[ 14.759] Initializing built-in extension DPMS
[ 14.759] Initializing built-in extension Present
[ 14.759] Initializing built-in extension DRI3
[ 14.759] Initializing built-in extension X-Resource
[ 14.759] Initializing built-in extension XVideo
[ 14.759] Initializing built-in extension XVideo-MotionCompensation
[ 14.759] Initializing built-in extension XFree86-VidModeExtension
[ 14.759] Initializing built-in extension XFree86-DGA
[ 14.759] Initializing built-in extension XFree86-DRI
[ 14.759] Initializing built-in extension DRI2
[ 14.759] (II) LoadModule: "glx"
[ 14.760] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.766] (II) Module glx: vendor="X.Org Foundation"
[ 14.766] compiled for 1.15.0, module version = 1.0.0
[ 14.766] ABI class: X.Org Server Extension, version 8.0
[ 14.766] (==) AIGLX enabled
[ 14.766] Loading extension GLX
[ 14.766] (==) Matched nouveau as autoconfigured driver 0
[ 14.766] (==) Matched nvidia as autoconfigured driver 1
[ 14.766] (==) Matched nv as autoconfigured driver 2
[ 14.766] (==) Matched nouveau as autoconfigured driver 3
[ 14.766] (==) Matched nvidia as autoconfigured driver 4
[ 14.766] (==) Matched nv as autoconfigured driver 5
[ 14.766] (==) Matched nouveau as autoconfigured driver 6
[ 14.766] (==) Matched nvidia as autoconfigured driver 7
[ 14.766] (==) Matched nv as autoconfigured driver 8
[ 14.766] (==) Matched modesetting as autoconfigured driver 9
[ 14.766] (==) Matched fbdev as autoconfigured driver 10
[ 14.766] (==) Matched vesa as autoconfigured driver 11
[ 14.766] (==) Assigned the driver to the xf86ConfigLayout
[ 14.766] (II) LoadModule: "nouveau"
[ 14.766] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 14.767] (II) Module nouveau: vendor="X.Org Foundation"
[ 14.767] compiled for 1.15.0, module version = 1.0.10
[ 14.767] Module class: X.Org Video Driver
[ 14.767] ABI class: X.Org Video Driver, version 15.0
[ 14.767] (II) LoadModule: "nvidia"
[ 14.768] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.777] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.777] compiled for 4.0.2, module version = 1.0.0
[ 14.777] Module class: X.Org Video Driver
[ 14.777] (II) LoadModule: "nv"
[ 14.784] (WW) Warning, couldn't open module nv
[ 14.784] (II) UnloadModule: "nv"
[ 14.784] (II) Unloading nv
[ 14.784] (EE) Failed to load module "nv" (module does not exist, 0)
[ 14.784] (II) LoadModule: "modesetting"
[ 14.784] (WW) Warning, couldn't open module modesetting
[ 14.784] (II) UnloadModule: "modesetting"
[ 14.784] (II) Unloading modesetting
[ 14.784] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 14.784] (II) LoadModule: "fbdev"
[ 14.784] (WW) Warning, couldn't open module fbdev
[ 14.784] (II) UnloadModule: "fbdev"
[ 14.784] (II) Unloading fbdev
[ 14.784] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 14.784] (II) LoadModule: "vesa"
[ 14.784] (WW) Warning, couldn't open module vesa
[ 14.784] (II) UnloadModule: "vesa"
[ 14.784] (II) Unloading vesa
[ 14.784] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 14.784] (II) NOUVEAU driver
[ 14.784] (II) NOUVEAU driver for NVIDIA chipset families :
[ 14.784] RIVA TNT (NV04)
[ 14.784] RIVA TNT2 (NV05)
[ 14.784] GeForce 256 (NV10)
[ 14.784] GeForce 2 (NV11, NV15)
[ 14.784] GeForce 4MX (NV17, NV18)
[ 14.784] GeForce 3 (NV20)
[ 14.784] GeForce 4Ti (NV25, NV28)
[ 14.784] GeForce FX (NV3x)
[ 14.784] GeForce 6 (NV4x)
[ 14.784] GeForce 7 (G7x)
[ 14.784] GeForce 8 (G8x)
[ 14.784] GeForce GTX 200 (NVA0)
[ 14.784] GeForce GTX 400 (NVC0)
[ 14.784] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 14.784] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.784] (++) using VT number 1
[ 14.784] (II) [drm] nouveau interface version: 1.1.1
[ 14.785] (II) [drm] nouveau interface version: 1.1.1
[ 14.785] (II) Loading sub module "dri2"
[ 14.785] (II) LoadModule: "dri2"
[ 14.785] (II) Module "dri2" already built-in
[ 14.785] (--) NOUVEAU(0): Chipset: "NVIDIA NVC4"
[ 14.785] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.785] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 14.785] (==) NOUVEAU(0): RGB weight 888
[ 14.785] (==) NOUVEAU(0): Default visual is TrueColor
[ 14.785] (==) NOUVEAU(0): Using HW cursor
[ 14.785] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 14.785] (==) NOUVEAU(0): Page flipping enabled
[ 14.785] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 14.819] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 14.842] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 14.844] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 14.874] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 14.874] (II) NOUVEAU(0): Manufacturer: GSM Model: 5678 Serial#: 95359
[ 14.874] (II) NOUVEAU(0): Year: 2010 Week: 6
[ 14.874] (II) NOUVEAU(0): EDID Version: 1.3
[ 14.874] (II) NOUVEAU(0): Digital Display Input
[ 14.874] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 49 vert.: 32
[ 14.874] (II) NOUVEAU(0): Gamma: 2.20
[ 14.874] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 14.874] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.874] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 14.874] (II) NOUVEAU(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 14.874] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 14.874] (II) NOUVEAU(0): Supported established timings:
[ 14.874] (II) NOUVEAU(0): 720x400@70Hz
[ 14.874] (II) NOUVEAU(0): 640x480@60Hz
[ 14.874] (II) NOUVEAU(0): 640x480@75Hz
[ 14.874] (II) NOUVEAU(0): 800x600@56Hz
[ 14.874] (II) NOUVEAU(0): 800x600@60Hz
[ 14.874] (II) NOUVEAU(0): 800x600@75Hz
[ 14.874] (II) NOUVEAU(0): 832x624@75Hz
[ 14.874] (II) NOUVEAU(0): 1024x768@60Hz
[ 14.874] (II) NOUVEAU(0): 1024x768@75Hz
[ 14.874] (II) NOUVEAU(0): 1280x1024@75Hz
[ 14.874] (II) NOUVEAU(0): 1152x864@75Hz
[ 14.874] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 14.874] (II) NOUVEAU(0): Supported standard timings:
[ 14.874] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 14.874] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 14.874] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 14.874] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 14.874] (II) NOUVEAU(0): Supported detailed timing:
[ 14.874] (II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 14.874] (II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 14.874] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 14.874] (II) NOUVEAU(0): Supported detailed timing:
[ 14.874] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 14.874] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 14.874] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 14.874] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 14.874] (II) NOUVEAU(0): Monitor name: W2242
[ 14.874] (II) NOUVEAU(0): EDID (in hex):
[ 14.874] (II) NOUVEAU(0): 00ffffffffffff001e6d78567f740100
[ 14.874] (II) NOUVEAU(0): 06140103ea312078eaaec5a2574a9c25
[ 14.874] (II) NOUVEAU(0): 125054a76b80950081808140714f0101
[ 14.874] (II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
[ 14.874] (II) NOUVEAU(0): 3600da281100001a21399030621a2740
[ 14.874] (II) NOUVEAU(0): 68b03600da281100001c000000fd0038
[ 14.874] (II) NOUVEAU(0): 4b1e530f000a202020202020000000fc
[ 14.874] (II) NOUVEAU(0): 0057323234320a202020202020200070
[ 14.874] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 14.874] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 14.874] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.874] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.897] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 14.899] (II) NOUVEAU(0): EDID for output HDMI-1
[ 14.899] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 14.899] (II) NOUVEAU(0): Output DVI-I-2 disconnected
[ 14.899] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 14.899] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 14.899] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1680x1050
[ 14.899] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 14.899] (--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[ 14.899] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 14.899] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.899] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 14.899] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.899] (==) NOUVEAU(0): DPI set to (96, 96)
[ 14.899] (II) Loading sub module "fb"
[ 14.899] (II) LoadModule: "fb"
[ 14.899] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.901] (II) Module fb: vendor="X.Org Foundation"
[ 14.901] compiled for 1.15.0, module version = 1.0.0
[ 14.901] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.901] (II) Loading sub module "exa"
[ 14.901] (II) LoadModule: "exa"
[ 14.901] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 14.901] (II) Module exa: vendor="X.Org Foundation"
[ 14.901] compiled for 1.15.0, module version = 2.6.0
[ 14.901] ABI class: X.Org Video Driver, version 15.0
[ 14.901] (II) Loading sub module "shadowfb"
[ 14.901] (II) LoadModule: "shadowfb"
[ 14.901] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 14.902] (II) Module shadowfb: vendor="X.Org Foundation"
[ 14.902] compiled for 1.15.0, module version = 1.0.0
[ 14.902] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.902] (II) Loading sub module "dri2"
[ 14.902] (II) LoadModule: "dri2"
[ 14.902] (II) Module "dri2" already built-in
[ 14.902] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC4"
[ 14.902] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 14.902] (==) NOUVEAU(G0): RGB weight 888
[ 14.902] (==) NOUVEAU(G0): Default visual is TrueColor
[ 14.902] (==) NOUVEAU(G0): Using HW cursor
[ 14.902] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 14.902] (==) NOUVEAU(G0): Page flipping enabled
[ 14.902] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 14.929] (II) NOUVEAU(G0): Output DVI-I-1-3 has no monitor section
[ 14.952] (II) NOUVEAU(G0): Output DVI-I-1-4 has no monitor section
[ 14.954] (II) NOUVEAU(G0): Output HDMI-1-2 has no monitor section
[ 14.977] (II) NOUVEAU(G0): EDID for output DVI-I-1-3
[ 15.000] (II) NOUVEAU(G0): EDID for output DVI-I-1-4
[ 15.002] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[ 15.002] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 15.002] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 15.002] (**) NOUVEAU(G0): Mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 15.002] (II) NOUVEAU(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 15.002] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 15.002] (II) Loading sub module "fb"
[ 15.002] (II) LoadModule: "fb"
[ 15.002] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.002] (II) Module fb: vendor="X.Org Foundation"
[ 15.002] compiled for 1.15.0, module version = 1.0.0
[ 15.002] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.002] (II) Loading sub module "exa"
[ 15.002] (II) LoadModule: "exa"
[ 15.002] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 15.002] (II) Module exa: vendor="X.Org Foundation"
[ 15.002] compiled for 1.15.0, module version = 2.6.0
[ 15.002] ABI class: X.Org Video Driver, version 15.0
[ 15.002] (II) Loading sub module "shadowfb"
[ 15.002] (II) LoadModule: "shadowfb"
[ 15.003] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 15.003] (II) Module shadowfb: vendor="X.Org Foundation"
[ 15.003] compiled for 1.15.0, module version = 1.0.0
[ 15.003] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.003] (II) UnloadModule: "nvidia"
[ 15.003] (II) Unloading nvidia
[ 15.003] (--) Depth 24 pixmap format is 32 bpp
[ 15.004] (II) NOUVEAU(G0): Opened GPU channel 0
[ 15.010] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 15.010] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 15.010] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 15.010] (II) EXA(256): Driver allocated offscreen pixmaps
[ 15.010] (II) EXA(256): Driver registered support for the following operations:
[ 15.010] (II) Solid
[ 15.010] (II) Copy
[ 15.010] (II) Composite (RENDER acceleration)
[ 15.010] (II) UploadToScreen
[ 15.010] (II) DownloadFromScreen
[ 15.010] (==) NOUVEAU(G0): Backing store enabled
[ 15.010] (==) NOUVEAU(G0): Silken mouse enabled
[ 15.010] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 15.010] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 15.010] (==) NOUVEAU(G0): DPMS enabled
[ 15.010] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.012] (II) NOUVEAU(0): Opened GPU channel 0
[ 15.018] (II) NOUVEAU(0): [DRI2] Setup complete
[ 15.018] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 15.018] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 15.018] (II) EXA(0): Driver allocated offscreen pixmaps
[ 15.018] (II) EXA(0): Driver registered support for the following operations:
[ 15.018] (II) Solid
[ 15.018] (II) Copy
[ 15.018] (II) Composite (RENDER acceleration)
[ 15.018] (II) UploadToScreen
[ 15.018] (II) DownloadFromScreen
[ 15.018] (==) NOUVEAU(0): Backing store enabled
[ 15.018] (==) NOUVEAU(0): Silken mouse enabled
[ 15.018] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 15.018] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 15.018] (==) NOUVEAU(0): DPMS enabled
[ 15.018] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.018] (--) RandR disabled
[ 15.092] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15.092] (II) AIGLX: enabled GLX_ARB_create_context
[ 15.092] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 15.092] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 15.092] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 15.092] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 15.092] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 15.092] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 15.092] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 15.092] (II) AIGLX: Loaded and initialized nouveau
[ 15.092] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15.097] (II) NOUVEAU(G0): NVEnterVT is called.
[ 15.100] (II) NOUVEAU(0): NVEnterVT is called.
[ 15.126] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[ 15.126] resize called 1680 1050
[ 15.151] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 15.151] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.151] (II) LoadModule: "evdev"
[ 15.151] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.152] (II) Module evdev: vendor="X.Org Foundation"
[ 15.152] compiled for 1.15.0, module version = 2.8.2
[ 15.152] Module class: X.Org XInput Driver
[ 15.152] ABI class: X.Org XInput driver, version 20.0
[ 15.152] (II) Using input driver 'evdev' for 'Power Button'
[ 15.152] (**) Power Button: always reports core events
[ 15.152] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 15.152] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.152] (--) evdev: Power Button: Found keys
[ 15.152] (II) evdev: Power Button: Configuring as keyboard
[ 15.152] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 15.152] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.152] (**) Option "xkb_rules" "evdev"
[ 15.152] (**) Option "xkb_model" "pc104"
[ 15.152] (**) Option "xkb_layout" "us"
[ 15.161] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 15.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.161] (II) Using input driver 'evdev' for 'Power Button'
[ 15.161] (**) Power Button: always reports core events
[ 15.161] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 15.161] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.161] (--) evdev: Power Button: Found keys
[ 15.161] (II) evdev: Power Button: Configuring as keyboard
[ 15.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event4"
[ 15.161] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 15.161] (**) Option "xkb_rules" "evdev"
[ 15.161] (**) Option "xkb_model" "pc104"
[ 15.161] (**) Option "xkb_layout" "us"
[ 15.161] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 15.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event20)
[ 15.161] (II) No input driver specified, ignoring this device.
[ 15.161] (II) This device may have been added with another device file.
[ 15.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 15.161] (II) No input driver specified, ignoring this device.
[ 15.161] (II) This device may have been added with another device file.
[ 15.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 15.161] (II) No input driver specified, ignoring this device.
[ 15.161] (II) This device may have been added with another device file.
[ 15.162] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[ 15.162] (II) No input driver specified, ignoring this device.
[ 15.162] (II) This device may have been added with another device file.
[ 15.162] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 15.162] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event24)
[ 15.162] (II) No input driver specified, ignoring this device.
[ 15.162] (II) This device may have been added with another device file.
[ 15.162] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event23)
[ 15.162] (II) No input driver specified, ignoring this device.
[ 15.162] (II) This device may have been added with another device file.
[ 15.162] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event22)
[ 15.162] (II) No input driver specified, ignoring this device.
[ 15.162] (II) This device may have been added with another device file.
[ 15.162] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event21)
[ 15.162] (II) No input driver specified, ignoring this device.
[ 15.162] (II) This device may have been added with another device file.
[ 15.162] (II) config/udev: Adding input device Gaming Keyboard (/dev/input/event1)
[ 15.162] (**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.162] (II) Using input driver 'evdev' for 'Gaming Keyboard'
[ 15.162] (**) Gaming Keyboard: always reports core events
[ 15.162] (**) evdev: Gaming Keyboard: Device: "/dev/input/event1"
[ 15.162] (--) evdev: Gaming Keyboard: Vendor 0x46d Product 0xc221
[ 15.162] (--) evdev: Gaming Keyboard: Found keys
[ 15.162] (II) evdev: Gaming Keyboard: Configuring as keyboard
[ 15.162] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.0/input/input3/event1"
[ 15.162] (II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD, id 8)
[ 15.162] (**) Option "xkb_rules" "evdev"
[ 15.162] (**) Option "xkb_model" "pc104"
[ 15.162] (**) Option "xkb_layout" "us"
[ 15.162] (II) config/udev: Adding input device Gaming Keyboard (/dev/input/event2)
[ 15.162] (**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.162] (II) Using input driver 'evdev' for 'Gaming Keyboard'
[ 15.162] (**) Gaming Keyboard: always reports core events
[ 15.162] (**) evdev: Gaming Keyboard: Device: "/dev/input/event2"
[ 15.162] (--) evdev: Gaming Keyboard: Vendor 0x46d Product 0xc221
[ 15.162] (--) evdev: Gaming Keyboard: Found keys
[ 15.162] (II) evdev: Gaming Keyboard: Configuring as keyboard
[ 15.162] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/input/input4/event2"
[ 15.162] (II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD, id 9)
[ 15.162] (**) Option "xkb_rules" "evdev"
[ 15.162] (**) Option "xkb_model" "pc104"
[ 15.162] (**) Option "xkb_layout" "us"
[ 15.163] (II) config/udev: Adding input device G11 Keyboard (/dev/input/event3)
[ 15.163] (**) G11 Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.163] (II) Using input driver 'evdev' for 'G11 Keyboard'
[ 15.163] (**) G11 Keyboard: always reports core events
[ 15.163] (**) evdev: G11 Keyboard: Device: "/dev/input/event3"
[ 15.163] (--) evdev: G11 Keyboard: Vendor 0x46d Product 0xc225
[ 15.163] (--) evdev: G11 Keyboard: Found keys
[ 15.163] (II) evdev: G11 Keyboard: Configuring as keyboard
[ 15.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.4/1-13.4:1.0/input/input5/event3"
[ 15.163] (II) XINPUT: Adding extended input device "G11 Keyboard" (type: KEYBOARD, id 10)
[ 15.163] (**) Option "xkb_rules" "evdev"
[ 15.163] (**) Option "xkb_model" "pc104"
[ 15.163] (**) Option "xkb_layout" "us"
[ 15.163] (II) config/udev: Adding input device Saitek Cyborg R.A.T.7 Albino (/dev/input/event0)
[ 15.163] (**) Saitek Cyborg R.A.T.7 Albino: Applying InputClass "evdev pointer catchall"
[ 15.163] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.7 Albino'
[ 15.163] (**) Saitek Cyborg R.A.T.7 Albino: always reports core events
[ 15.163] (**) evdev: Saitek Cyborg R.A.T.7 Albino: Device: "/dev/input/event0"
[ 15.163] (--) evdev: Saitek Cyborg R.A.T.7 Albino: Vendor 0x6a3 Product 0xcce
[ 15.163] (--) evdev: Saitek Cyborg R.A.T.7 Albino: Found 17 mouse buttons
[ 15.163] (--) evdev: Saitek Cyborg R.A.T.7 Albino: Found scroll wheel(s)
[ 15.163] (--) evdev: Saitek Cyborg R.A.T.7 Albino: Found relative axes
[ 15.163] (--) evdev: Saitek Cyborg R.A.T.7 Albino: Found x and y relative axes
[ 15.163] (II) evdev: Saitek Cyborg R.A.T.7 Albino: Configuring as mouse
[ 15.163] (II) evdev: Saitek Cyborg R.A.T.7 Albino: Adding scrollwheel support
[ 15.163] (**) evdev: Saitek Cyborg R.A.T.7 Albino: YAxisMapping: buttons 4 and 5
[ 15.163] (**) evdev: Saitek Cyborg R.A.T.7 Albino: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/input/input2/event0"
[ 15.163] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.7 Albino" (type: MOUSE, id 11)
[ 15.163] (II) evdev: Saitek Cyborg R.A.T.7 Albino: initialized for relative axes.
[ 15.163] (**) Saitek Cyborg R.A.T.7 Albino: (accel) keeping acceleration scheme 1
[ 15.163] (**) Saitek Cyborg R.A.T.7 Albino: (accel) acceleration profile 0
[ 15.163] (**) Saitek Cyborg R.A.T.7 Albino: (accel) acceleration factor: 2.000
[ 15.163] (**) Saitek Cyborg R.A.T.7 Albino: (accel) acceleration threshold: 4
[ 15.163] (II) config/udev: Adding input device Saitek Cyborg R.A.T.7 Albino (/dev/input/mouse0)
[ 15.163] (II) No input driver specified, ignoring this device.
[ 15.163] (II) This device may have been added with another device file.
[ 15.163] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 15.163] (II) No input driver specified, ignoring this device.
[ 15.163] (II) This device may have been added with another device file.
[ 15.163] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event16)
[ 15.163] (II) No input driver specified, ignoring this device.
[ 15.163] (II) This device may have been added with another device file.
[ 15.163] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event15)
[ 15.163] (II) No input driver specified, ignoring this device.
[ 15.163] (II) This device may have been added with another device file.
[ 15.164] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event14)
[ 15.164] (II) No input driver specified, ignoring this device.
[ 15.164] (II) This device may have been added with another device file.
[ 15.164] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[ 15.164] (II) No input driver specified, ignoring this device.
[ 15.164] (II) This device may have been added with another device file.
[ 15.164] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 15.164] (II) No input driver specified, ignoring this device.
[ 15.164] (II) This device may have been added with another device file.
[ 15.164] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 15.164] (II) No input driver specified, ignoring this device.
[ 15.164] (II) This device may have been added with another device file.
[ 15.164] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event10)
[ 15.164] (II) No input driver specified, ignoring this device.
[ 15.164] (II) This device may have been added with another device file.
[ 15.164] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[ 15.164] (II) No input driver specified, ignoring this device.
[ 15.164] (II) This device may have been added with another device file.
[ 15.164] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 15.164] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 15.164] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 15.164] (**) Eee PC WMI hotkeys: always reports core events
[ 15.164] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 15.164] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 15.164] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 15.164] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 15.164] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[ 15.164] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 15.164] (**) Option "xkb_rules" "evdev"
[ 15.164] (**) Option "xkb_model" "pc104"
[ 15.164] (**) Option "xkb_layout" "us"
[ 15.164] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 15.164] (II) No input driver specified, ignoring this device.
[ 15.164] (II) This device may have been added with another device file.
[ 15.227] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22136
[ 15.227] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 15.227] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 15.227] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.227] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 15.227] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.227] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 69.523] (II) evdev: Eee PC WMI hotkeys: Close
[ 69.523] (II) UnloadModule: "evdev"
[ 69.523] (II) evdev: Saitek Cyborg R.A.T.7 Albino: Close
[ 69.523] (II) UnloadModule: "evdev"
[ 69.523] (II) evdev: G11 Keyboard: Close
[ 69.523] (II) UnloadModule: "evdev"
[ 69.523] (II) evdev: Gaming Keyboard: Close
[ 69.523] (II) UnloadModule: "evdev"
[ 69.523] (II) evdev: Gaming Keyboard: Close
[ 69.523] (II) UnloadModule: "evdev"
[ 69.523] (II) evdev: Power Button: Close
[ 69.523] (II) UnloadModule: "evdev"
[ 69.523] (II) evdev: Power Button: Close
[ 69.523] (II) UnloadModule: "evdev"
[ 69.523] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 69.523] Error dropping master: -22(Invalid argument)
[ 69.523] (II) NOUVEAU(G0): Closed GPU channel 0
[ 69.525] (II) NOUVEAU(0): NVLeaveVT is called.
[ 69.526] (II) NOUVEAU(0): Closed GPU channel 0
[ 69.558] (EE) Server terminated successfully (0). Closing log file.
Xorg.0.log (after restarting X, everything works fine!)
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 80.293] X Protocol Version 11, Revision 0
[ 80.295] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 80.296] Current Operating System: Linux wasteland 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64
[ 80.296] Kernel command line: vmlinuz-linux initrd=initramfs-linux.img root=/dev/mapper/root cryptdevice=/dev/sda2:root:allow-discards ro
[ 80.299] Build Date: 09 January 2014 08:47:24AM
[ 80.301]
[ 80.303] Current version of pixman: 0.32.4
[ 80.306] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 80.306] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 80.314] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 17 14:31:44 2014
[ 80.315] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 80.315] (==) No Layout section. Using the first Screen section.
[ 80.315] (==) No screen section available. Using defaults.
[ 80.315] (**) |-->Screen "Default Screen Section" (0)
[ 80.315] (**) | |-->Monitor "<default monitor>"
[ 80.315] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 80.315] (==) Automatically adding devices
[ 80.315] (==) Automatically enabling devices
[ 80.315] (==) Automatically adding GPU devices
[ 80.315] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 80.315] Entry deleted from font path.
[ 80.315] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 80.315] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 80.315] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 80.315] (II) Loader magic: 0x804c80
[ 80.315] (II) Module ABI versions:
[ 80.315] X.Org ANSI C Emulation: 0.4
[ 80.315] X.Org Video Driver: 15.0
[ 80.315] X.Org XInput driver : 20.0
[ 80.315] X.Org Server Extension : 8.0
[ 80.316] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 80.316] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 80.316] (--) PCI:*(0:1:0:0) 10de:0e22:1458:34fc rev 161, Mem @ 0xf4000000/33554432, 0xe8000000/134217728, 0xf0000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 80.316] (--) PCI: (0:2:0:0) 10de:0e22:1458:34fc rev 161, Mem @ 0xe4000000/33554432, 0xd8000000/134217728, 0xe0000000/67108864, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 80.316] (II) Open ACPI successful (/var/run/acpid.socket)
[ 80.317] Initializing built-in extension Generic Event Extension
[ 80.319] Initializing built-in extension SHAPE
[ 80.320] Initializing built-in extension MIT-SHM
[ 80.322] Initializing built-in extension XInputExtension
[ 80.324] Initializing built-in extension XTEST
[ 80.325] Initializing built-in extension BIG-REQUESTS
[ 80.327] Initializing built-in extension SYNC
[ 80.328] Initializing built-in extension XKEYBOARD
[ 80.330] Initializing built-in extension XC-MISC
[ 80.331] Initializing built-in extension SECURITY
[ 80.332] Initializing built-in extension XINERAMA
[ 80.334] Initializing built-in extension XFIXES
[ 80.335] Initializing built-in extension RENDER
[ 80.337] Initializing built-in extension RANDR
[ 80.338] Initializing built-in extension COMPOSITE
[ 80.340] Initializing built-in extension DAMAGE
[ 80.341] Initializing built-in extension MIT-SCREEN-SAVER
[ 80.342] Initializing built-in extension DOUBLE-BUFFER
[ 80.344] Initializing built-in extension RECORD
[ 80.345] Initializing built-in extension DPMS
[ 80.347] Initializing built-in extension Present
[ 80.348] Initializing built-in extension DRI3
[ 80.349] Initializing built-in extension X-Resource
[ 80.351] Initializing built-in extension XVideo
[ 80.352] Initializing built-in extension XVideo-MotionCompensation
[ 80.354] Initializing built-in extension XFree86-VidModeExtension
[ 80.355] Initializing built-in extension XFree86-DGA
[ 80.357] Initializing built-in extension XFree86-DRI
[ 80.358] Initializing built-in extension DRI2
[ 80.358] (II) LoadModule: "glx"
[ 80.358] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 80.359] (II) Module glx: vendor="X.Org Foundation"
[ 80.359] compiled for 1.15.0, module version = 1.0.0
[ 80.359] ABI class: X.Org Server Extension, version 8.0
[ 80.359] (==) AIGLX enabled
[ 80.359] Loading extension GLX
[ 80.360] (==) Matched nouveau as autoconfigured driver 0
[ 80.360] (==) Matched nvidia as autoconfigured driver 1
[ 80.360] (==) Matched nv as autoconfigured driver 2
[ 80.360] (==) Matched nouveau as autoconfigured driver 3
[ 80.360] (==) Matched nvidia as autoconfigured driver 4
[ 80.360] (==) Matched nv as autoconfigured driver 5
[ 80.360] (==) Matched modesetting as autoconfigured driver 6
[ 80.360] (==) Matched fbdev as autoconfigured driver 7
[ 80.360] (==) Matched vesa as autoconfigured driver 8
[ 80.360] (==) Assigned the driver to the xf86ConfigLayout
[ 80.360] (II) LoadModule: "nouveau"
[ 80.360] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 80.360] (II) Module nouveau: vendor="X.Org Foundation"
[ 80.360] compiled for 1.15.0, module version = 1.0.10
[ 80.360] Module class: X.Org Video Driver
[ 80.360] ABI class: X.Org Video Driver, version 15.0
[ 80.360] (II) LoadModule: "nvidia"
[ 80.360] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 80.360] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 80.360] compiled for 4.0.2, module version = 1.0.0
[ 80.360] Module class: X.Org Video Driver
[ 80.360] (II) LoadModule: "nv"
[ 80.360] (WW) Warning, couldn't open module nv
[ 80.360] (II) UnloadModule: "nv"
[ 80.360] (II) Unloading nv
[ 80.360] (EE) Failed to load module "nv" (module does not exist, 0)
[ 80.360] (II) LoadModule: "modesetting"
[ 80.360] (WW) Warning, couldn't open module modesetting
[ 80.360] (II) UnloadModule: "modesetting"
[ 80.360] (II) Unloading modesetting
[ 80.360] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 80.360] (II) LoadModule: "fbdev"
[ 80.360] (WW) Warning, couldn't open module fbdev
[ 80.360] (II) UnloadModule: "fbdev"
[ 80.360] (II) Unloading fbdev
[ 80.360] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 80.360] (II) LoadModule: "vesa"
[ 80.360] (WW) Warning, couldn't open module vesa
[ 80.360] (II) UnloadModule: "vesa"
[ 80.360] (II) Unloading vesa
[ 80.360] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 80.360] (II) NOUVEAU driver
[ 80.360] (II) NOUVEAU driver for NVIDIA chipset families :
[ 80.360] RIVA TNT (NV04)
[ 80.360] RIVA TNT2 (NV05)
[ 80.360] GeForce 256 (NV10)
[ 80.360] GeForce 2 (NV11, NV15)
[ 80.360] GeForce 4MX (NV17, NV18)
[ 80.360] GeForce 3 (NV20)
[ 80.360] GeForce 4Ti (NV25, NV28)
[ 80.360] GeForce FX (NV3x)
[ 80.360] GeForce 6 (NV4x)
[ 80.360] GeForce 7 (G7x)
[ 80.360] GeForce 8 (G8x)
[ 80.360] GeForce GTX 200 (NVA0)
[ 80.360] GeForce GTX 400 (NVC0)
[ 80.360] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 80.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 80.360] (++) using VT number 1
[ 80.361] (II) [drm] nouveau interface version: 1.1.1
[ 80.361] (II) Loading sub module "dri2"
[ 80.361] (II) LoadModule: "dri2"
[ 80.361] (II) Module "dri2" already built-in
[ 80.361] (--) NOUVEAU(0): Chipset: "NVIDIA NVC4"
[ 80.361] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 80.361] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 80.361] (==) NOUVEAU(0): RGB weight 888
[ 80.361] (==) NOUVEAU(0): Default visual is TrueColor
[ 80.361] (==) NOUVEAU(0): Using HW cursor
[ 80.361] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 80.361] (==) NOUVEAU(0): Page flipping enabled
[ 80.361] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 80.394] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 80.417] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 80.420] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 80.449] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 80.449] (II) NOUVEAU(0): Manufacturer: GSM Model: 5678 Serial#: 95359
[ 80.449] (II) NOUVEAU(0): Year: 2010 Week: 6
[ 80.449] (II) NOUVEAU(0): EDID Version: 1.3
[ 80.449] (II) NOUVEAU(0): Digital Display Input
[ 80.449] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 49 vert.: 32
[ 80.449] (II) NOUVEAU(0): Gamma: 2.20
[ 80.449] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 80.449] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 80.449] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 80.449] (II) NOUVEAU(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 80.449] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 80.449] (II) NOUVEAU(0): Supported established timings:
[ 80.449] (II) NOUVEAU(0): 720x400@70Hz
[ 80.449] (II) NOUVEAU(0): 640x480@60Hz
[ 80.449] (II) NOUVEAU(0): 640x480@75Hz
[ 80.449] (II) NOUVEAU(0): 800x600@56Hz
[ 80.449] (II) NOUVEAU(0): 800x600@60Hz
[ 80.449] (II) NOUVEAU(0): 800x600@75Hz
[ 80.449] (II) NOUVEAU(0): 832x624@75Hz
[ 80.449] (II) NOUVEAU(0): 1024x768@60Hz
[ 80.449] (II) NOUVEAU(0): 1024x768@75Hz
[ 80.449] (II) NOUVEAU(0): 1280x1024@75Hz
[ 80.450] (II) NOUVEAU(0): 1152x864@75Hz
[ 80.450] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 80.450] (II) NOUVEAU(0): Supported standard timings:
[ 80.450] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 80.450] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 80.450] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 80.450] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 80.450] (II) NOUVEAU(0): Supported detailed timing:
[ 80.450] (II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 80.450] (II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 80.450] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 80.450] (II) NOUVEAU(0): Supported detailed timing:
[ 80.450] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 80.450] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 80.450] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 80.450] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 80.450] (II) NOUVEAU(0): Monitor name: W2242
[ 80.450] (II) NOUVEAU(0): EDID (in hex):
[ 80.450] (II) NOUVEAU(0): 00ffffffffffff001e6d78567f740100
[ 80.450] (II) NOUVEAU(0): 06140103ea312078eaaec5a2574a9c25
[ 80.450] (II) NOUVEAU(0): 125054a76b80950081808140714f0101
[ 80.450] (II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
[ 80.450] (II) NOUVEAU(0): 3600da281100001a21399030621a2740
[ 80.450] (II) NOUVEAU(0): 68b03600da281100001c000000fd0038
[ 80.450] (II) NOUVEAU(0): 4b1e530f000a202020202020000000fc
[ 80.450] (II) NOUVEAU(0): 0057323234320a202020202020200070
[ 80.450] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 80.450] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 80.450] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 80.450] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 80.473] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 80.475] (II) NOUVEAU(0): EDID for output HDMI-1
[ 80.475] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 80.475] (II) NOUVEAU(0): Output DVI-I-2 disconnected
[ 80.475] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 80.475] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 80.475] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1680x1050
[ 80.475] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 80.475] (--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[ 80.475] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 80.475] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 80.475] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 80.475] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 80.475] (==) NOUVEAU(0): DPI set to (96, 96)
[ 80.475] (II) Loading sub module "fb"
[ 80.475] (II) LoadModule: "fb"
[ 80.475] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 80.475] (II) Module fb: vendor="X.Org Foundation"
[ 80.475] compiled for 1.15.0, module version = 1.0.0
[ 80.475] ABI class: X.Org ANSI C Emulation, version 0.4
[ 80.475] (II) Loading sub module "exa"
[ 80.475] (II) LoadModule: "exa"
[ 80.475] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 80.475] (II) Module exa: vendor="X.Org Foundation"
[ 80.475] compiled for 1.15.0, module version = 2.6.0
[ 80.475] ABI class: X.Org Video Driver, version 15.0
[ 80.475] (II) Loading sub module "shadowfb"
[ 80.475] (II) LoadModule: "shadowfb"
[ 80.475] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 80.475] (II) Module shadowfb: vendor="X.Org Foundation"
[ 80.475] compiled for 1.15.0, module version = 1.0.0
[ 80.475] ABI class: X.Org ANSI C Emulation, version 0.4
[ 80.475] (II) UnloadModule: "nvidia"
[ 80.475] (II) Unloading nvidia
[ 80.475] (--) Depth 24 pixmap format is 32 bpp
[ 80.477] (II) NOUVEAU(0): Opened GPU channel 0
[ 80.483] (II) NOUVEAU(0): [DRI2] Setup complete
[ 80.483] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 80.483] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 80.483] (II) EXA(0): Driver allocated offscreen pixmaps
[ 80.483] (II) EXA(0): Driver registered support for the following operations:
[ 80.483] (II) Solid
[ 80.483] (II) Copy
[ 80.483] (II) Composite (RENDER acceleration)
[ 80.483] (II) UploadToScreen
[ 80.483] (II) DownloadFromScreen
[ 80.483] (==) NOUVEAU(0): Backing store enabled
[ 80.483] (==) NOUVEAU(0): Silken mouse enabled
[ 80.483] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 80.483] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 80.483] (==) NOUVEAU(0): DPMS enabled
[ 80.483] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 80.483] (--) RandR disabled
[ 80.500] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 80.500] (II) AIGLX: enabled GLX_ARB_create_context
[ 80.500] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 80.500] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 80.500] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 80.500] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 80.500] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 80.500] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 80.500] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 80.500] (II) AIGLX: Loaded and initialized nouveau
[ 80.500] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 80.504] (II) NOUVEAU(0): NVEnterVT is called.
[ 80.522] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[ 80.522] resize called 1680 1050
[ 80.536] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 80.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.536] (II) LoadModule: "evdev"
[ 80.536] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 80.536] (II) Module evdev: vendor="X.Org Foundation"
[ 80.536] compiled for 1.15.0, module version = 2.8.2
[ 80.536] Module class: X.Org XInput Driver
[ 80.536] ABI class: X.Org XInput driver, version 20.0
[ 80.536] (II) Using input driver 'evdev' for 'Power Button'
[ 80.536] (**) Power Button: always reports core events
[ 80.536] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 80.536] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.536] (--) evdev: Power Button: Found keys
[ 80.536] (II) evdev: Power Button: Configuring as keyboard
[ 80.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 80.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.536] (**) Option "xkb_rules" "evdev"
[ 80.536] (**) Option "xkb_model" "pc104"
[ 80.536] (**) Option "xkb_layout" "us"
[ 80.545] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 80.545] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.545] (II) Using input driver 'evdev' for 'Power Button'
[ 80.545] (**) Power Button: always reports core events
[ 80.545] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 80.545] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.545] (--) evdev: Power Button: Found keys
[ 80.545] (II) evdev: Power Button: Configuring as keyboard
[ 80.545] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event4"
[ 80.545] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 80.545] (**) Option "xkb_rules" "evdev"
[ 80.545] (**) Option "xkb_model" "pc104"
[ 80.545] (**) Option "xkb_layout" "us"
[ 80.545] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 80.545] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event20)
[ 80.545] (II) No input driver specified, ignoring this device.
[ 80.545] (II) This device may have been added with another device file.
[ 80.545] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 80.545] (II) No input driver specified, ignoring this device.
[ 80.545] (II) This device may have been added with another device file.
[ 80.545] (II) config/udev: Adding input device HDA NVidia HDPlease reproduce the issue and post the output of dmesg:
dmesg > dmesg.txt
if the system hangs hard, then try to clean reboot and do:
journalctl -b -1 -k > dmesg.txt
as root. -
I'm curious whether the
Apple Mini-DVI to Video Adapter works with the Mini-DVI port of the new Mac Mini or whether it will suffer the same fate as the Jan 2009 Macbook.
I want to hook the new mini to a SD TV and my options are either S-Video or Composite. Of course there is always the option of buying a VGA adapter, then a VGA->S-Video converter but that's a lot of cables (and cost) for a fairly simple task.
Would highly appreciate it if someone who has the new mini and the Mini-DVI to video adapter could verify whether it works or not.I cannot believe this. I even asked the guy at the shop when I bought the additional connector. This was a primary and mandatory requirement for me. They don't even tell front line that it doesn't work anymore. I have been burnt Apple. FIX the analog video interface, not now but RIGHT NOW!
Also the new Apple Mini DVI with female DVI, it does not connect to the Male DVI with svideo that I used with my last mac mini (now given to folks). The flat female DVI hole is too small for the male. Was this intentional?
Apple Mini DVI to svideo / composite plug if it doesn't work???!!!
I tried to boot just with the TV, a multi sync Grundig. I only got the apple logo image at boot but it was tripled. Then it disappeared...
This is a nightmare and a disgrace!
I am pleading now!!!! -
Laptop screen does not turn on after resume from suspend/hibernate
I use systemctl suspend/hibernate to resume, but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] tseg: 009ff00000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
[ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
[ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
[ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
[ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
[ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
[ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
[ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
[ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1960479
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10155 pages used for memmap
[ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1397.380 MHz processor
[ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
[ 0.000046] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20141107
[ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
[ 0.015021] ACPI: All ACPI Tables successfully acquired
[ 0.016280] Security Framework initialized
[ 0.016286] Yama: becoming mindful.
[ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020472] Initializing cgroup subsys memory
[ 0.020479] Initializing cgroup subsys devices
[ 0.020482] Initializing cgroup subsys freezer
[ 0.020484] Initializing cgroup subsys net_cls
[ 0.020487] Initializing cgroup subsys blkio
[ 0.020510] CPU: Physical Processor ID: 0
[ 0.020511] CPU: Processor Core ID: 0
[ 0.020513] mce: CPU supports 6 MCE banks
[ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
[ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.021880] ftrace: allocating 21166 entries in 83 pages
[ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
[ 0.174081] Performance Events: AMD PMU driver.
[ 0.174086] ... version: 0
[ 0.174087] ... bit width: 48
[ 0.174088] ... generic registers: 4
[ 0.174089] ... value mask: 0000ffffffffffff
[ 0.174090] ... max period: 00007fffffffffff
[ 0.174091] ... fixed-purpose events: 0
[ 0.174092] ... event mask: 000000000000000f
[ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.197738] x86: Booting SMP configuration:
[ 0.197744] .... node #0, CPUs: #1 #2 #3
[ 0.250891] x86: Booted up 1 node, 4 CPUs
[ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
[ 0.252264] devtmpfs: initialized
[ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
[ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
[ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
[ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
[ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
[ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
[ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
[ 0.258125] pinctrl core: initialized pinctrl subsystem
[ 0.258173] RTC time: 18:50:52, date: 02/22/15
[ 0.258343] NET: Registered protocol family 16
[ 0.270952] cpuidle: using governor ladder
[ 0.284279] cpuidle: using governor menu
[ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.284493] ACPI: bus type PCI registered
[ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.285035] PCI: Using configuration type 1 for base access
[ 0.299021] ACPI: Added _OSI(Module Device)
[ 0.299025] ACPI: Added _OSI(Processor Device)
[ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
[ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.831121] ACPI: Interpreter enabled
[ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.831167] ACPI: (supports S0 S3 S4 S5)
[ 0.831169] ACPI: Using IOAPIC for interrupt routing
[ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.843782] PCI host bridge to bus 0000:00
[ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
[ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
[ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.844070] pci 0000:00:01.0: supports D1 D2
[ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
[ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.844272] pci 0000:00:01.1: supports D1 D2
[ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
[ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
[ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
[ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
[ 0.845242] pci 0000:00:12.2: supports D1 D2
[ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
[ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
[ 0.845727] pci 0000:00:13.2: supports D1 D2
[ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.846982] pci 0000:00:15.0: supports D1 D2
[ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.847225] pci 0000:00:15.1: supports D1 D2
[ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.847466] pci 0000:00:15.2: supports D1 D2
[ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.847956] pci 0000:00:16.2: supports D1 D2
[ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
[ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.849834] pci 0000:04:00.0: supports D1 D2
[ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.854860] pci 0000:05:00.0: supports D1 D2
[ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
[ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
[ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
[ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
[ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
[ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
[ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
[ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
[ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
[ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
[ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
[ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
[ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
[ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
[ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
[ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
[ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
[ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
[ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
[ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
[ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
[ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
[ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
[ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
[ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
[ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
[ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
[ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
[ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
[ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
[ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
[ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
[ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
[ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.864464] vgaarb: loaded
[ 0.864466] vgaarb: bridge control possible 0000:00:01.0
[ 0.864788] PCI: Using ACPI for IRQ routing
[ 0.874741] PCI: pci_cache_line_size set to 64 bytes
[ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
[ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
[ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
[ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
[ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
[ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.875079] NetLabel: Initializing
[ 0.875081] NetLabel: domain hash size = 128
[ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.875101] NetLabel: unlabeled traffic allowed by default
[ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.877246] Switched to clocksource hpet
[ 0.884868] pnp: PnP ACPI init
[ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.886021] system 00:01: [io 0x040b] has been reserved
[ 0.886025] system 00:01: [io 0x04d6] has been reserved
[ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.886032] system 00:01: [io 0x0c14] has been reserved
[ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.886039] system 00:01: [io 0x0c52] has been reserved
[ 0.886042] system 00:01: [io 0x0c6c] has been reserved
[ 0.886046] system 00:01: [io 0x0c6f] has been reserved
[ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
[ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.887277] pnp: PnP ACPI: found 9 devices
[ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896259] NET: Registered protocol family 2
[ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.897360] TCP: reno registered
[ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897618] NET: Registered protocol family 1
[ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.838171] PCI: CLS 64 bytes, default 64
[ 1.838242] Unpacking initramfs...
[ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
[ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
[ 1.934495] microcode: CPU0: patch_level=0x03000014
[ 1.934537] microcode: CPU1: patch_level=0x03000014
[ 1.934580] microcode: CPU2: patch_level=0x03000014
[ 1.934625] microcode: CPU3: patch_level=0x03000014
[ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.934766] LVT offset 0 assigned for vector 0x400
[ 1.934817] perf: AMD IBS detected (0x000000ff)
[ 1.934854] Scanning for low memory corruption every 60 seconds
[ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.935315] Initialise system trusted keyring
[ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.937285] zpool: loaded
[ 1.937288] zbud: loaded
[ 1.937658] VFS: Disk quotas dquot_6.5.2
[ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.937948] Key type big_key registered
[ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.938508] io scheduler noop registered
[ 1.938511] io scheduler deadline registered
[ 1.938546] io scheduler cfq registered (default)
[ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
[ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 1.939552] vesafb: scrolling: redraw
[ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
[ 1.955978] Console: switching to colour frame buffer device 144x54
[ 1.972261] fb0: VESA VGA frame buffer device
[ 1.972328] GHES: HEST is not enabled!
[ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.973720] Linux agpgart interface v0.103
[ 1.973797] rtc_cmos 00:02: RTC can wake from S4
[ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.974434] TCP: cubic registered
[ 1.974593] NET: Registered protocol family 10
[ 1.975020] NET: Registered protocol family 17
[ 1.975476] Loading compiled-in X.509 certificates
[ 1.975502] registered taskstats version 1
[ 1.976231] Magic number: 3:326:848
[ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
[ 1.976444] PM: Hibernation image not present or could not be loaded.
[ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 1.977027] Write protecting the kernel read-only data: 8192k
[ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 1.979659] random: systemd urandom read with 1 bits of entropy available
[ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.980576] systemd[1]: Detected architecture 'x86-64'.
[ 1.980581] systemd[1]: Running in initial RAM disk.
[ 1.980590] systemd[1]: Running with unpopulated /etc.
[ 1.980603] systemd[1]: No hostname configured.
[ 1.980609] systemd[1]: Set hostname to <localhost>.
[ 1.980655] systemd[1]: Initializing machine ID from random generator.
[ 1.996373] systemd[1]: Populated /etc with preset unit settings.
[ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
[ 2.003390] systemd[1]: Created slice -.slice.
[ 2.003412] systemd[1]: Starting -.slice.
[ 2.005054] systemd[1]: Listening on Journal Audit Socket.
[ 2.005188] systemd[1]: Created slice system.slice.
[ 2.005200] systemd[1]: Starting system.slice.
[ 2.005218] systemd[1]: Reached target Swap.
[ 2.005226] systemd[1]: Starting Swap.
[ 2.005288] systemd[1]: Listening on udev Control Socket.
[ 2.005296] systemd[1]: Starting udev Control Socket.
[ 2.005312] systemd[1]: Reached target Slices.
[ 2.005320] systemd[1]: Starting Slices.
[ 2.005335] systemd[1]: Reached target Local File Systems.
[ 2.005342] systemd[1]: Starting Local File Systems.
[ 2.005358] systemd[1]: Reached target Timers.
[ 2.005366] systemd[1]: Starting Timers.
[ 2.005398] systemd[1]: Listening on udev Kernel Socket.
[ 2.005409] systemd[1]: Starting udev Kernel Socket.
[ 2.005430] systemd[1]: Reached target Paths.
[ 2.005441] systemd[1]: Starting Paths.
[ 2.005497] systemd[1]: Listening on Journal Socket.
[ 2.005510] systemd[1]: Starting Journal Socket.
[ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
[ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.007428] systemd[1]: Starting Journal Service...
[ 2.007472] systemd[1]: Reached target Sockets.
[ 2.007494] systemd[1]: Starting Sockets.
[ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
[ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
[ 2.021212] systemd[1]: Started udev Kernel Device Manager.
[ 2.024169] systemd[1]: Started udev Coldplug all Devices.
[ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.041719] SCSI subsystem initialized
[ 2.042505] ACPI: bus type USB registered
[ 2.042538] usbcore: registered new interface driver usbfs
[ 2.042552] usbcore: registered new interface driver hub
[ 2.042588] usbcore: registered new device driver usb
[ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.045154] systemd[1]: Started Journal Service.
[ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.045840] ohci-pci: OHCI PCI platform driver
[ 2.045993] QUIRK: Enable AMD PLL fix
[ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
[ 2.046697] ehci-pci: EHCI PCI platform driver
[ 2.047833] libata version 3.00 loaded.
[ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.102273] hub 1-0:1.0: USB hub found
[ 2.102287] hub 1-0:1.0: 5 ports detected
[ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
[ 2.159071] hub 2-0:1.0: USB hub found
[ 2.159085] hub 2-0:1.0: 5 ports detected
[ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
[ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 2.215699] hub 3-0:1.0: USB hub found
[ 2.215713] hub 3-0:1.0: 4 ports detected
[ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
[ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.271523] ehci-pci 0000:00:12.2: debug port 1
[ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
[ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.281694] hub 4-0:1.0: USB hub found
[ 2.281705] hub 4-0:1.0: 5 ports detected
[ 2.338086] hub 1-0:1.0: USB hub found
[ 2.338100] hub 1-0:1.0: 5 ports detected
[ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
[ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.338596] ehci-pci 0000:00:13.2: debug port 1
[ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
[ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.348396] hub 5-0:1.0: USB hub found
[ 2.348414] hub 5-0:1.0: 5 ports detected
[ 2.404806] hub 2-0:1.0: USB hub found
[ 2.404820] hub 2-0:1.0: 5 ports detected
[ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
[ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.461571] ehci-pci 0000:00:16.2: debug port 1
[ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.471768] hub 6-0:1.0: USB hub found
[ 2.471780] hub 6-0:1.0: 4 ports detected
[ 2.528139] hub 3-0:1.0: USB hub found
[ 2.528154] hub 3-0:1.0: 4 ports detected
[ 2.528415] ahci 0000:00:11.0: version 3.0
[ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.529180] scsi host0: ahci
[ 2.529664] scsi host1: ahci
[ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
[ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
[ 2.530551] scsi host2: pata_atiixp
[ 2.530815] scsi host3: pata_atiixp
[ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
[ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
[ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
[ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
[ 3.017307] ata1.00: configured for UDMA/133
[ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
[ 3.019278] ata2.00: configured for UDMA/100
[ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
[ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
[ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.084075] sda: sda1 sda2 sda3
[ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.528901] XFS (sda1): Mounting V4 Filesystem
[ 3.710527] XFS (sda1): Ending clean mount
[ 3.935255] Switched to clocksource tsc
[ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
[ 4.799287] random: nonblocking pool is initialized
[ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
[ 7.417234] ACPI: acpi_idle registered with cpuidle
[ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
[ 7.544509] wmi: Mapper loaded
[ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 7.626522] acpi device:2b: registered as cooling_device4
[ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
[ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
[ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
[ 7.746486] ACPI: Lid Switch [LID]
[ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.746725] ACPI: Power Button [SLPB]
[ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.746880] ACPI: Power Button [PWRF]
[ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
[ 7.749951] ACPI: AC Adapter [AC0] (on-line)
[ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.061752] [drm] Initialized drm 1.1.0 20060810
[ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
[ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
[ 8.363138] kvm: Nested Virtualization enabled
[ 8.363151] kvm: Nested Paging enabled
[ 8.704039] [drm] radeon kernel modesetting enabled.
[ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 8.832364] AMD IOMMUv2 functionality not available on this system
[ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
[ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
[ 9.031523] media: Linux media interface: v0.10
[ 9.102014] CRAT table not found
[ 9.102024] Finished initializing topology ret=0
[ 9.102177] kfd kfd: Initialized module
[ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
[ 9.102951] fb: switching to radeondrmfb from VESA VGA
[ 9.103002] Console: switching to colour dummy device 80x25
[ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
[ 9.104059] [drm] register mmio base: 0xFEB00000
[ 9.104063] [drm] register mmio size: 262144
[ 9.104144] ATOM BIOS: Toshiba
[ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
[ 9.104235] [drm] RAM width 32bits DDR
[ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
[ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 9.104394] [TTM] Initializing pool allocator
[ 9.104407] [TTM] Initializing DMA pool allocator
[ 9.104455] [drm] radeon: 512M of VRAM memory ready
[ 9.104459] [drm] radeon: 1024M of GTT memory ready.
[ 9.104497] [drm] Loading SUMO Microcode
[ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
[ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.170455] Linux video capture interface: v2.00
[ 9.179293] mousedev: PS/2 mouse device common for all mice
[ 9.223473] [drm] Internal thermal controller without fan control
[ 9.223622] [drm] Found smc ucode version: 0x00011200
[ 9.223730] [drm] radeon: dpm initialized
[ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 9.282345] radeon 0000:00:01.0: WB enabled
[ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
[ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
[ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
[ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.283082] [drm] Driver supports precise vblank timestamp query.
[ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
[ 9.283145] [drm] radeon: irq initialized.
[ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.298931] rtlwifi: rtlwifi: wireless switch is on
[ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
[ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
[ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
[ 9.307058] sound hdaudioC0D2: inputs:
[ 9.307061] sound hdaudioC0D2: Mic=0x18
[ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
[ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
[ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
[ 9.369840] [drm] UVD initialized successfully.
[ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
[ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
[ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
[ 9.789309] usbcore: registered new interface driver uvcvideo
[ 9.789319] USB Video Class driver (1.1.1)
[ 9.871399] cfg80211: World regulatory domain updated:
[ 9.871412] cfg80211: DFS Master region: unset
[ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.890507] [drm] ib test on ring 5 succeeded
[ 9.911771] [drm] radeon atom DIG backlight initialized
[ 9.911776] [drm] Radeon Display Connectors
[ 9.911777] [drm] Connector 0:
[ 9.911779] [drm] VGA-1
[ 9.911780] [drm] HPD2
[ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.911783] [drm] Encoders:
[ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
[ 9.911786] [drm] CRT1: NUTMEG
[ 9.911787] [drm] Connector 1:
[ 9.911788] [drm] LVDS-1
[ 9.911789] [drm] HPD1
[ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.911791] [drm] Encoders:
[ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
[ 9.911793] [drm] LCD1: TRAVIS
[ 9.911794] [drm] Connector 2:
[ 9.911795] [drm] HDMI-A-1
[ 9.911796] [drm] HPD5
[ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 9.911799] [drm] Encoders:
[ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
[ 10.016569] [drm] fb mappable at 0xC0478000
[ 10.016576] [drm] vram apper at 0xC0000000
[ 10.016578] [drm] size 5787648
[ 10.016580] [drm] fb depth is 24
[ 10.016582] [drm] pitch is 6400
[ 10.016970] fbcon: radeondrmfb (fb0) is primary device
[ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
[ 10.143532] Console: switching to colour frame buffer device 200x56
[ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 10.150312] radeon 0000:00:01.0: registered panic notifier
[ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[ 10.194853] cfg80211: Calling CRDA for country: US
[ 10.231380] cfg80211: Regulatory domain changed to country: US
[ 10.231393] cfg80211: DFS Master region: FCC
[ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 10.422003] XFS (sda3): Mounting V5 Filesystem
[ 10.837256] XFS (sda3): Ending clean mount
[ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
[ 11.195453] microcode: CPU0: new patch_level=0x03000027
[ 11.195496] microcode: CPU1: new patch_level=0x03000027
[ 11.195601] microcode: CPU2: new patch_level=0x03000027
[ 11.195693] microcode: CPU3: new patch_level=0x03000027
[ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
[ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.753012] wlp4s0: authenticated
[ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
[ 13.758283] wlp4s0: associated
[ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 23.961417] PM: Syncing filesystems ... done.
[ 24.305227] PM: Preparing system for mem sleep
[ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 24.311542] PM: Entering mem sleep
[ 24.311898] Suspending console(s) (use no_console_suspend to debug)
[ 24.320753] wlp4s0: deauthenticating fSuspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
Try a different graphics driver
Tweak the driver module parameters or build your own driver.
Unfortunately I don't have experience with the radeon driver, so I can only give you ideas. -
I just installed Mavricks over Snow Lepard, and my boot speed is really slow and so is the quit time. From boot to ability to use apps. is slightly greater than 1 minute. Once the desk top appears, the icons in the dock and all aps are not active for at least 25-30 seconds. I would really appreciate any advice anyone more knowledgeable that I can offer. I have attached my system boot log from BOOT_TIME to 1 minute past the time on the clock when I logged in. (I apologize in advance for the length of the log, but hopefully it will suply the needed clues):
Machine characteristics:
MacBook Pro
15-inch, Mid 2009
OSX 10.9
3.06 GHz Intel core 2 Duo
8GB 1067 MHz DDR3
NVIDIA GeForce 9400M 256 MB
L2 Cache:6 MB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP53.00AC.B03
BOOT_LOG
Nov 26 21:49:43 localhost bootlog[0]: BOOT_TIME 1385520583 0
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:04 --- last message repeated 6 times ---
Nov 26 21:50:01 localhost kernel[0]: Longterm timer threshold: 1000 ms
Nov 26 21:50:01 localhost kernel[0]: Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Nov 26 21:50:01 localhost kernel[0]: vm_page_bootstrap: 1957638 free pages and 57594 wired pages
Nov 26 21:50:01 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
Nov 26 21:50:01 localhost kernel[0]: zone leak detection enabled
Nov 26 21:50:01 localhost kernel[0]: "vm_compressor_mode" is 4
Nov 26 21:50:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 26 21:50:01 localhost kernel[0]: standard background quantum is 2500 us
Nov 26 21:50:01 localhost kernel[0]: mig_table_max_displ = 74
Nov 26 21:50:01 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
Nov 26 21:50:01 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
Nov 26 21:50:01 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Nov 26 21:50:01 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 26 21:50:01 localhost kernel[0]: calling mpo_policy_init for Sandbox
Nov 26 21:50:01 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Nov 26 21:50:01 localhost kernel[0]: calling mpo_policy_init for Quarantine
Nov 26 21:50:01 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Nov 26 21:50:01 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 26 21:50:01 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 26 21:50:01 localhost kernel[0]: MAC Framework successfully initialized
Nov 26 21:50:01 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Nov 26 21:50:01 localhost kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
Nov 26 21:50:01 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Nov 26 21:50:01 localhost kernel[0]: ACPI: sleep states S3 S4 S5
Nov 26 21:50:01 localhost kernel[0]: pci (build 22:16:29 Sep 19 2013), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
Nov 26 21:50:01 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 22:16:38 Sep 19 2013) initialization complete
Nov 26 21:50:01 localhost kernel[0]: [ PCI configuration begin ]
Nov 26 21:50:01 localhost kernel[0]: console relocated to 0xf80010000
Nov 26 21:50:01 localhost kernel[0]: [ PCI configuration end, bridges 6, devices 19 ]
Nov 26 21:50:01 localhost kernel[0]: NVEthernet::start - Built Sep 19 2013 22:20:06
Nov 26 21:50:01 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 64b9e8fffeb7a402; max speed s800.
Nov 26 21:50:01 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
Nov 26 21:50:01 localhost kernel[0]: mcache: 2 CPU(s), 64 bytes CPU cache line size
Nov 26 21:50:01 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
Nov 26 21:50:01 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Nov 26 21:50:01 localhost kernel[0]: rooting via boot-uuid from /chosen: FE938F11-7B34-3E73-9EE2-51E88F19B800
Nov 26 21:50:01 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 26 21:50:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Nov 26 21:50:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Nov 26 21:50:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Nov 26 21:50:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Nov 26 21:50:01 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Nov 26 21:50:01 localhost kernel[0]: BTCOEXIST off
Nov 26 21:50:01 localhost kernel[0]: BRCM tunables:
Nov 26 21:50:01 localhost kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
Nov 26 21:50:01 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9500420ASG Media/IOGUIDPartitionScheme/Untitled@2
Nov 26 21:50:01 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
Nov 26 21:50:01 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
Nov 26 21:50:01 localhost kernel[0]: VM Swap Subsystem is ON
Nov 26 21:50:01 localhost kernel[0]: Waiting for DSMOS...
Nov 26 21:49:45 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Nov 26 21:49:45 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Nov 26 21:49:55 localhost com.apple.SecurityServer[14]: Session 100000 created
Nov 26 21:49:59 localhost distnoted[21]: # distnote server daemon absolute time: 17.216507128 civil time: Tue Nov 26 21:49:59 2013 pid: 21 uid: 0 root: yes
Nov 26 21:50:00 localhost hidd[49]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
Nov 26 21:50:01 localhost hidd[49]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 26 21:50:01 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Nov 26 21:50:01 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Nov 26 21:50:05 localhost com.apple.usbmuxd[26]: usbmuxd-323.1 on Oct 3 2013 at 12:43:24, running 64 bit
Nov 26 21:50:05 localhost kernel[0]: init
Nov 26 21:50:05 localhost kernel[0]: probe
Nov 26 21:50:05 localhost kernel[0]: start
Nov 26 21:50:05 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Nov 26 21:50:05 localhost kernel[0]: NVDAStartup: Official
Nov 26 21:50:05 localhost kernel[0]: NVDANV50HAL loaded and registered
Nov 26 21:50:05 localhost kernel[0]: NVDAStartup: Official
Nov 26 21:50:05 localhost kernel[0]: NVDANV50HAL loaded and registered
Nov 26 21:50:05 localhost kernel[0]: AGC: 3.4.12, HW version=1.8.8, flags:0, features:4
Nov 26 21:50:05 localhost kernel[0]: IOBluetoothUSBDFU::probe
Nov 26 21:50:05 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0207
Nov 26 21:50:05 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x6c00 ****
Nov 26 21:50:05 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x6c00 ****
Nov 26 21:50:05 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x6c00
Nov 26 21:50:05 localhost kernel[0]: Previous Shutdown Cause: -128
Nov 26 21:50:05 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Nov 26 21:50:05 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Nov 26 21:50:05 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x7040 -- 0xe000 -- 0x6c00 ****
Nov 26 21:50:06 localhost kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active
Nov 26 21:50:06 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Nov 26 21:50:06 localhost kernel[0]: DSMOS has arrived
Nov 26 21:50:07 localhost configd[18]: dhcp_arp_router: en1 SSID unavailable
Nov 26 21:50:07 localhost configd[18]: network changed.
Nov 26 21:50:07 MacBookPro-2.local configd[18]: setting hostname to "MacBookPro-2.local"
Nov 26 21:50:07 MacBookPro-2 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Nov 26 21:50:07 MacBookPro-2.local mds[40]: (Normal) FMW: FMW 0 0
Nov 26 21:50:07 MacBookPro-2.local mds[40]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Nov 26 21:50:07 --- last message repeated 2 times ---
Nov 26 21:50:07 MacBookPro-2.local blued[59]: hostControllerOnline - Number of Paired devices = 2, List of Paired devices = (
"00-1d-d8-3a-cc-60",
"00-26-08-ab-c6-5f"
Nov 26 21:50:08 MacBookPro-2.local com.apple.SecurityServer[14]: Entering service
Nov 26 21:50:08 MacBookPro-2.local loginwindow[44]: Login Window Application Started
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: label: default
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: dbname: od:/Local/Default
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: mkey_file: /var/db/krb5kdc/m-key
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: acl_file: /var/db/krb5kdc/kadmind.acl
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: digest-request: uid=0
Nov 26 21:50:08 MacBookPro-2.local mDNSResponder[41]: mDNSResponder mDNSResponder-522.1.11 (Aug 24 2013 23:49:34) starting OSXVers 13
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: digest-request: netr probe 0
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: digest-request: init request
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: digest-request: init return domain: BUILTIN server: MACBOOKPRO-2 indomain was: <NULL>
Nov 26 21:50:08 MacBookPro-2.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Nov 26 21:50:08 MacBookPro-2.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
Nov 26 21:50:08 MacBookPro-2.local awacsd[61]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
Nov 26 21:50:08 MacBookPro-2.local awacsd[61]: InnerStore CopyAllZones: no info in Dynamic Store
Nov 26 21:50:08 MacBookPro-2.local WindowServer[85]: Server is starting up
Nov 26 21:50:08 MacBookPro-2.local blued[59]: link key found for device: 00-1d-d8-3a-cc-60
Nov 26 21:50:08 MacBookPro-2.local configd[18]: network changed.
Nov 26 21:50:08 MacBookPro-2.local configd[18]: network changed: DNS*
Nov 26 21:50:08 MacBookPro-2.local mDNSResponder[41]: D2D_IPC: Loaded
Nov 26 21:50:08 MacBookPro-2.local mDNSResponder[41]: D2DInitialize succeeded
Nov 26 21:50:08 MacBookPro-2.local mDNSResponder[41]: 4: Listening for incoming Unix Domain Socket client requests
Nov 26 21:50:08 MacBookPro-2.local networkd[105]: networkd.105 built Aug 24 2013 22:08:46
Nov 26 21:50:08 MacBookPro-2.local aosnotifyd[64]: aosnotifyd has been launched
Nov 26 21:50:08 MacBookPro-2.local systemkeychain[88]: done file: /var/run/systemkeychaincheck.done
Nov 26 21:50:08 MacBookPro-2.local airportd[65]: airportdProcessDLILEvent: en1 attached (up)
Nov 26 21:50:08 MacBookPro-2 kernel[0]: createVirtIf(): ifRole = 1
Nov 26 21:50:08 MacBookPro-2 kernel[0]: in func createVirtualInterface ifRole = 1
Nov 26 21:50:08 MacBookPro-2 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
Nov 26 21:50:08 MacBookPro-2 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
Nov 26 21:50:08 MacBookPro-2 kernel[0]: Created virtif 0xffffff8014825400 p2p0
Nov 26 21:50:08 MacBookPro-2 kernel[0]: nspace-handler-set-snapshot-time: 1385520610
Nov 26 21:50:08 MacBookPro-2.local com.apple.mtmd[39]: Set snapshot time: 2013-11-26 21:50:10 -0500 (current time: 2013-11-26 21:50:08 -0500)
Nov 26 21:50:08 MacBookPro-2.local locationd[46]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
Nov 26 21:50:08 MacBookPro-2.local locationd[46]: NBB-Could not get UDID for stable refill timing, falling back on random
Nov 26 21:50:09 MacBookPro-2.local locationd[46]: Location icon should now be in state 'Inactive'
Nov 26 21:50:09 MacBookPro-2.local aosnotifyd[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:09 MacBookPro-2.local mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:10 MacBookPro-2.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F8312006960 MacBookPro-2.local. (Addr) that's already in the list
Nov 26 21:50:10 MacBookPro-2.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F8312006DF0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
Nov 26 21:50:10 MacBookPro-2.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F8312008960 MacBookPro-2.local. (AAAA) that's already in the list
Nov 26 21:50:10 MacBookPro-2.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F8312008DF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
Nov 26 21:50:10 MacBookPro-2.local aosnotifyd[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:10 MacBookPro-2.local mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:11 MacBookPro-2.local blued[59]: Save link key for device: 00-1d-d8-3a-cc-60
Nov 26 21:50:11 MacBookPro-2.local aosnotifyd[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:11 MacBookPro-2.local mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:12 MacBookPro-2.local aosnotifyd[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:12 MacBookPro-2.local mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:13 MacBookPro-2.local apsd[63]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Nov 26 21:50:13 MacBookPro-2 kernel[0]: hfs: mounted Recovery HD on device disk0s3
Nov 26 21:50:13 MacBookPro-2.local mds[40]: (Normal) Volume: volume:0x7f932b028000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
Nov 26 21:50:13 MacBookPro-2.local mtmfs[38]: mount succeeded for /Volumes/MobileBackups
Nov 26 21:50:13 MacBookPro-2.local mds[40]: (Normal) Volume: volume:0x7f932a8b2000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/MobileBackups
Nov 26 21:50:13 MacBookPro-2.local mds[40]: (Normal) Volume: volume:0x7f932a8b2000 ********** Created snapshot backup index
Nov 26 21:50:13 MacBookPro-2.local fseventsd[50]: Logging disabled completely for device:1: /Volumes/Recovery HD
Nov 26 21:50:14 MacBookPro-2 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
Nov 26 21:50:14 MacBookPro-2 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
Nov 26 21:50:14 MacBookPro-2.local WindowServer[85]: Session 256 retained (2 references)
Nov 26 21:50:14 MacBookPro-2.local WindowServer[85]: Session 256 released (1 references)
Nov 26 21:50:14 MacBookPro-2.local WindowServer[85]: Session 256 retained (2 references)
Nov 26 21:50:14 MacBookPro-2.local WindowServer[85]: init_page_flip: page flip mode is on
Nov 26 21:50:15 MacBookPro-2 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
Nov 26 21:50:15 MacBookPro-2.local SystemStarter[113]: HP IO Monitor (126) did not complete successfully
Nov 26 21:50:15 MacBookPro-2.local SystemStarter[113]: The following StartupItems failed to start properly:
Nov 26 21:50:15 MacBookPro-2.local SystemStarter[113]: /Library/StartupItems/HP IO
Nov 26 21:50:15 MacBookPro-2.local SystemStarter[113]: - execution of Startup script failed
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 1 modes for display 0x00000000 [1, 0]
Nov 26 21:50:15 --- last message repeated 1 time ---
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 36 modes for display 0x00000000 [30, 6]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 1 modes for display 0x00000000 [1, 0]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: mux_initialize: Mode is logout
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 36 modes for display 0x00000000 [30, 6]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 1 modes for display 0x00000000 [1, 0]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: WSMachineUsesNewStyleMirroring: false
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x04272900: GL mask 0x5; bounds (0, 0)[1440 x 900], 36 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca4, S/N 0, Unit 0, Rotation 0
UUID 0x8a96a568c33550779a382c64e81094d2
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x003f003d: GL mask 0xa; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: WSSetWindowTransform: Singular matrix
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x04272900: GL mask 0x5; bounds (0, 0)[1440 x 900], 36 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca4, S/N 0, Unit 0, Rotation 0
UUID 0x8a96a568c33550779a382c64e81094d2
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x003f003d: GL mask 0xa; bounds (2464, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: CGXPerformInitialDisplayConfiguration
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x04272900: Unit 0; Alias(0, 0x5); Vendor 0x610 Model 0x9ca4 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x003f003d: Unit 1; Alias(1, 0xa); Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: CGXMuxBoot: Boot normal
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x00004cc3, unit 0, caps QEX|MIPMAP, vram 256 MB
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor: GL renderer id 0x0202260c, GL mask 0x0000000c, accelerator 0x00003a2b, unit 2, caps QEX|MIPMAP, vram 512 MB
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor: GL renderer id 0x0202260c, GL mask 0x0000000c, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor enabled for tile size [256 x 256]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: CGXGLInitMipMap: mip map mode is on
Nov 26 21:50:15 MacBookPro-2.local loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Nov 26 21:50:16 MacBookPro-2.local WindowServer[85]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Nov 26 21:50:16 MacBookPro-2.local launchctl[138]: com.apple.findmymacmessenger: Already loaded
Nov 26 21:50:16 MacBookPro-2.local loginwindow[44]: Setting the initial value of the magsave brightness level 1
Nov 26 21:50:16 MacBookPro-2.local loginwindow[44]: Login Window Started Security Agent
Nov 26 21:50:16 MacBookPro-2.local SecurityAgent[146]: This is the first run
Nov 26 21:50:16 MacBookPro-2.local SecurityAgent[146]: MacBuddy was run = 0
Nov 26 21:50:16 MacBookPro-2.local WindowServer[85]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fe75ac33640) - enabling OpenGL
Nov 26 21:50:16 MacBookPro-2.local com.apple.SecurityServer[14]: Session 100005 created
Nov 26 21:50:16 MacBookPro-2.local UserEventAgent[140]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Nov 26 21:50:17 MacBookPro-2 kernel[0]: MacAuthEvent en1 Auth result for: 00:1c:10:21:4e:2f MAC AUTH succeeded
Nov 26 21:50:17 MacBookPro-2 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Nov 26 21:50:17 MacBookPro-2 kernel[0]: AirPort: Link Up on en1
Nov 26 21:50:17 MacBookPro-2 kernel[0]: en1: BSSID changed to 00:1c:10:21:4e:2f
Nov 26 21:50:17 MacBookPro-2 kernel[0]: AirPort: RSN handshake complete on en1
Nov 26 21:50:17 MacBookPro-2 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Nov 26 21:50:17 MacBookPro-2.local WindowServer[85]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Nov 26 21:50:17 MacBookPro-2.local WindowServer[85]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Nov 26 21:50:19 --- last message repeated 1 time ---
Nov 26 21:50:19 MacBookPro-2.local SecurityAgent[146]: User info context values set for RS
Nov 26 21:50:19 MacBookPro-2.local SecurityAgent[146]: Login Window login proceeding
Nov 26 21:50:19 MacBookPro-2.local configd[18]: network changed: DNS* Proxy
Nov 26 21:50:19 MacBookPro-2.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'NetLink' making interface primary (protected network)
Nov 26 21:50:19 MacBookPro-2.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
Nov 26 21:50:19 MacBookPro-2.local UserEventAgent[11]: Captive: en1: Probing 'NetLink'
Nov 26 21:50:19 MacBookPro-2.local configd[18]: network changed: v4(en1!:192.168.1.107) DNS+ Proxy+ SMB
Nov 26 21:50:19 MacBookPro-2.local loginwindow[44]: Login Window - Returned from Security Agent
Nov 26 21:50:19 MacBookPro-2.local loginwindow[44]: USER_PROCESS: 44 console
Nov 26 21:50:19 MacBookPro-2.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
Nov 26 21:50:19 MacBookPro-2.local airportd[65]: _doAutoJoin: Already associated to “NetLink”. Bailing on auto-join.
Nov 26 21:50:19 MacBookPro-2 kernel[0]: AppleKeyStore:Sending lock change 0
Nov 26 21:50:19 MacBookPro-2 com.apple.launchd.peruser.501[160]: Background: Aqua: Registering new GUI session.
Nov 26 21:50:19 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.apple.cmfsyncagent): Ignored this key: UserName
Nov 26 21:50:19 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.apple.EscrowSecurityAlert): Unknown key: seatbelt-profiles
Nov 26 21:50:19 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Nov 26 21:50:19 MacBookPro-2.local launchctl[162]: com.apple.pluginkit.pkd: Already loaded
Nov 26 21:50:19 MacBookPro-2.local launchctl[162]: com.apple.sbd: Already loaded
Nov 26 21:50:19 MacBookPro-2.local distnoted[164]: # distnote server agent absolute time: 37.621698455 civil time: Tue Nov 26 21:50:19 2013 pid: 164 uid: 501 root: no
Nov 26 21:50:20 MacBookPro-2.local com.apple.SecurityServer[14]: Session 100007 created
Nov 26 21:50:20 MacBookPro-2.local WindowServer[85]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Nov 26 21:50:20 MacBookPro-2.local SystemUIServer[172]: Cannot find executable for CFBundle 0x7feb32de2b80 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
Nov 26 21:50:20 MacBookPro-2.local sharingd[182]: Starting Up...
Nov 26 21:50:20 MacBookPro-2.local WindowServer[85]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Nov 26 21:50:20 MacBookPro-2.local SystemUIServer[172]: Cannot find executable for CFBundle 0x7feb32d53ce0 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
Nov 26 21:50:20 MacBookPro-2.local SystemUIServer[172]: Cannot find executable for CFBundle 0x7feb32d78760 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
Nov 26 21:50:21 MacBookPro-2.local apsd[63]: Unrecognized leaf certificate
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.single-user-client[216]): assertion failed: 13A603: launchd + 102012 [C35AEAF6-FCF6-3C64-9FC8-38829064F8A8]: 0xd
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[217]): assertion failed: 13A603: launchd + 102012 [C35AEAF6-FCF6-3C64-9FC8-38829064F8A8]: 0xd
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[217]): Exited with code: 2
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist): Throttling respawn: Will start in 10 seconds
Nov 26 21:50:21 MacBookPro-2.local apsd[63]: Unexpected connection from logged out uid 501
Nov 26 21:50:21 MacBookPro-2 accountsd[227]: assertion failed: 13A603: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] ([email protected][215]): Exited with code: 2
Nov 26 21:50:21 MacBookPro-2.local SystemUIServer[172]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Nov 26 21:50:21 MacBookPro-2.local SystemUIServer[172]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Nov 26 21:50:21 MacBookPro-2 xpcproxy[231]: assertion failed: 13A603: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
Nov 26 21:50:21 MacBookPro-2.local com.apple.IconServicesAgent[230]: IconServicesAgent launched.
Nov 26 21:50:21 MacBookPro-2.local com.apple.SecurityServer[14]: Session 100011 created
Nov 26 21:50:22 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.apple.mrt.uiagent[197]): Exited with code: 255
Nov 26 21:50:22 MacBookPro-2 xpcproxy[238]: assertion failed: 13A603: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
Nov 26 21:50:23 MacBookPro-2.local awacsd[61]: Exiting
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
Nov 26 21:50:23 MacBookPro-2.local UserEventAgent[163]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Nov 26 21:50:23 MacBookPro-2.local accountsd[227]: /SourceCache/Accounts/Accounts-336.9/ACDAuthenticationPluginManager.m - -[ACDAuthenticationPluginManager credentialForAccount:client:handler:] - 230 - The authentication plugin for account "[email protected]" (A3E6B1AD-D8C7-47BB-92AD-3D6B58528D00) could not be found!
Nov 26 21:50:23 MacBookPro-2.local accountsd[227]: /SourceCache/Accounts/Accounts-336.9/ACDAccountStore.m - __62-[ACDAccountStore credentialForAccountWithIdentifier:handler:]_block_invoke389 - 857 - No plugin provides credentials for account [email protected]. Falling back to legacy behavior.
Nov 26 21:50:23 MacBookPro-2.local WiFiKeychainProxy[192]: [NO client logger] <Aug 30 2013 23:40:46> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
Nov 26 21:50:23 MacBookPro-2.local WiFiKeychainProxy[192]: [NO client logger] <Aug 30 2013 23:40:46> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
Nov 26 21:50:27 MacBookPro-2.local com.apple.time[163]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Nov 26 21:50:30 MacBookPro-2.local com.apple.SecurityServer[14]: Session 100014 created
Nov 26 21:50:31 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[251]): assertion failed: 13A603: launchd + 102012 [C35AEAF6-FCF6-3C64-9FC8-38829064F8A8]: 0xd
Nov 26 21:50:31 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[251]): Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
Nov 26 21:50:31 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[251]): Job failed to exec(3) for weird reason: 2
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/System.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/lck~System.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/.fl947E1BDB, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/login.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/lck~login.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/.fl62323D2F, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:38 MacBookPro-2.local LKDCHelper[255]: Starting (uid=501)
Nov 26 21:50:38 MacBookPro-2.local ReportCrash[247]: Attempting to read data: Called memoryAtAddress: 0x9444, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 208.
Nov 26 21:50:38 MacBookPro-2.local ReportCrash[247]: Attempting to read data: Called memoryAtAddress: 0x9588, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 208.
Nov 26 21:50:41 MacBookPro-2.local gamed[226]: CKSoftwareMap: Registering with Daemon
Nov 26 21:50:42 MacBookPro-2.local syncdefaultsd[222]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
Nov 26 21:50:43 MacBookPro-2.local parentalcontrolsd[256]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/System.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/lck~System.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/.fl947E1BDB, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/login.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/lck~login.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/.fl62323D2F, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:47 MacBookPro-2.local com.apple.NotesMigratorService[260]: Joined Aqua audit session
Nov 26 21:50:47 MacBookPro-2 netsession_mac[216]: netsession_mac(216,0xb031d000) malloc: *** auto malloc[216]: error: GC operation on unregistered thread. Thread registered implicitly. Break on auto_zone_thread_registration_error() to debug.
Nov 26 21:50:47 MacBookPro-2.local com.apple.internetaccounts[238]: An instance 0x7f82c16e5760 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7f82c16c8660> (
<NSKeyValueObservance 0x7f82c16c8790: Observer: 0x7f82c16cf070, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x7fff8fa4b44b, Property: 0x7f82c16c8630>
Nov 26 21:50:50 MacBookPro-2 netsession_mac[216]: netsession_mac(216,0xb039f000) malloc: *** auto malloc[216]: error: GC operation on unregistered thread. Thread registered implicitly. Break on auto_zone_thread_registration_error() to debug.
Nov 26 21:51:00 MacBookPro-2 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x6c00 ****
Nov 26 21:51:01 MacBookPro-2 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
Nov 26 21:51:02 MacBookPro-2 com.apple.launchd.peruser.501[160] (jp.co.canon.UFR2.BackGrounder[208]): Job appears to have crashed: Trace/BPT trap: 5
Nov 26 21:51:02 MacBookPro-2.local ReportCrash[247]: Attempting to read data: Called memoryAtAddress: 0x9444, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 267.
Nov 26 21:51:02 MacBookPro-2.local ReportCrash[247]: Attempting to read data: Called memoryAtAddress: 0x9588, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 267.
Nov 26 21:51:03 MacBookPro-2 com.apple.launchd.peruser.501[160] (jp.co.canon.UFR2.BackGrounder[267]): Job appears to have crashed: Trace/BPT trap: 5
Nov 26 21:51:03 MacBookPro-2 com.apple.launchd.peruser.501[160] (jp.co.canon.UFR2.BackGrounder): Throttling respawn: Will start in 10 seconds
Nov 26 21:51:03 MacBookPro-2.local ReportCrash[247]: Saved crash report for UFR II BackGrounder[208] version ??? to /Users/RS/Library/Logs/DiagnosticReports/UFR II BackGrounder_2013-11-26-215103_MacBookPro-2.crash
Nov 26 21:51:03 MacBookPro-2.local ReportCrash[247]: Saved crash report for UFR II BackGrounder[267] version ??? to /Users/RS/Library/Logs/DiagnosticReports/UFR II BackGrounder_2013-11-26-215103-1_MacBookPro-2.crash
Thanks again... Happy upcoming Turkey Day!In the future please don't post so much information unless you are asked for it. Most of what you posted is useless.
Here's what you can try:
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
I created an Excel template which includes VB and macros as an EXCEL.XLTM template file (I used a template file to keep users from overwriting the sample template file), but I have noticed that when users save the template, Excel 2010 defaults to sav
-
Added a 2nd Array on my Xserve RAID, Though it's not appearing in disk utilityt
I have an Xserve RAID unit. Up until now I have just been running 1 side of it with 7 drives on RAID 5 = about 4TB. I recently picked up another identical RAID unit with 7 drives to fill out the right hand bay of the unit doubling our capacity. I hav
-
Job not running on expected time
Hi, Please see the job details X NUMBER; BEGIN SYS.DBMS_JOB.SUBMIT *( job => X* *,what => 'BEGIN INVS_RIM_DATA_LOAD(''01A'',''RIMADMIN'',TRUNC(SYSDATE)); END;'* *,next_date => to_date('15/08/2011 23:09:00','dd/mm/yyyy hh24:mi:ss')* *,interval => 'TRU
-
Oracle10G and oracle11gr1 for windows and Linux
Hi Can you help me in getting these Softwares Oracle10G and oracle11gr1 for windows and Linux ,I am unable to get them . Thanks in advance Sanjeev Sen
-
DVD Drive gone after itunes update
I can no longer access my DVD drive. Windows Vista Home Premium. Sony DVD drive. iTunes 7.5 . If I uninstall iTunes my system can recognize my DVD drive, but when I install iTunes my dvd drive is gone from the system, can't be recognized by itunes or