Composition Lightbox editing issues

I am struggling with Compostion/Lightbox Display/ to embed videos frmo Vimeo.
When I want to add more thumbnails at the top it is difficult to place the video.
The first three work, but when I hit the arrow to add a fourth and then embed the fourth target, ... instead it edits the the third target instead.

I'm unable to reproduce the problem with embedding a video on an additional fourth target in a Composition Lightbox.
The default three Target Containers have an Image frame within their targets. However, when you add more slides to the Composition, they just have an empty Container where you would be placing the HTML embedding code for the video.
I would suggest removing the Image frames from the Containers of the first three targets as well (in order to maintain consistency) and place video on each of the Target containers. The default Fill color for the Container is black so you might find it a little inconvenient noticing the placed HTML unless you hover over the container or change the color of the Container (as the Youtube player frame is black in color too, probably the same for Vimeo)
If the above doesn't help, please try re-inserting the Composition Lightbox and follow the above steps.
Thanks,
Vinayak

Similar Messages

Basic problem with composition lightbox. Arggh!

Ok so basically I can't get the slides in the composition lightbox to work independently. I have a portfolio page with lots of thumbnail images. You click on these to open up the lightbox with a full size image of the thumb. When I add text or images to the first slide it appears on every page! I could of used the normal lightbox but I didn't want the thumbnail to be a small scale version of the full size image in the lightbox slide. I've created a set of interesting jpgs for the thumbs then imported the full size image on each page of the composition lightbox. When I add details and client brief to first slide it duplicates on every page. Any ideas?? Thanks in advance. I'm sure I'm missing something simple.

ok sorted it. I didn't have the action on active while editing.

Why iCal cancel of event edits issue is still not fixed after over 2 years?

Why iCal "cancel of event edits" issue is still not fixed after over 2 years?
I have been in the software engineering industry for over 14 years, but I have never seen a large corporation being so slow at addressing major issues like these.
What would it take for Apple to start working on this issue?

Yup. This is fully ridiculous that you can't cancel your updates once you start. I love the tool but this is on pretty significant issue.
Sometimes I accidentally move a mtg or make some edit while viewing and you can't back you!!
If you feel the same way, you should post a note here:
http://www.apple.com/feedback/ical.html
Message was edited by: SteveMc10123

Citrix Netscaler AppXpert with Sharepoint 2010 Page Edit Issue

Posting this as a questions and discussion point.
The issue is in using Citrix Netscaler with AppXpert with SharePoint 2010. I've seen this issue for two customers.
Configurations:
- Citrix Netscaler as the load Balancer
- Netscaler AppXpert for SharePoint deployed on Netscaler (using either AppXpert version 1.1 or 2.0)
- SharePoint 2010 Standard or Enterprise editions
Issue:
A SharePoint user with appropriate rights go to a SharePoint page. They choose Edit page, make changes and want to save changes. At this point all SharePoint ribbon options on the top are greyed out. End result, users are not able to make changes to their
site pages. Issue happens for everyone including Farm Admins.
Cases:
a. The users are able to edit and save SharePoint wiki pages if I point user's PC to the SharePoint web server WFE by changing their local host file.
b. On Citrix Netscaler, if I use the traditional load balancing i.e. without Citrix AppXpert, then the users are able to edit and save the pages. That is an option if the customer is using SharePoint 2010 Standard. That is not an option if a customer is
using InfoPath forms. InfoPath is a feature of SharePoint 2010 Enterprise edition. Citrix AppXpert for SharePoint is needed to make the InfoPath work. Else the users get session errors when they use InfoPath Web forms.
c. The issue happens on almost all combination of OS and browser. XP, vista, Win 7, Win8, Win8.1, IE8, 9, 10, 11 and other browsers like chrome etc as well.
Please share your ideas and suggestions.

Hi Faisal,
As I understand, the issue will be solved when end users directly connect to SharePoint WFE servers. Since the issue is related to third party products, I'd recommend you contact their support engineer for sufficient resource and assistance. For your convenience:
http://discussions.citrix.com/forum/150-support-forums/
Should you need more assistance, let me know. Thanks for the understanding.
Regards,
Rebecca Tu
TechNet Community Support

Question - composition lightbox display bug

When I add additional triggers to the composition lightbox display the caption boxes on the additional containers disappear. They appear with the original 3 triggers that come with the widget, but they are not present on any other additional triggers. ???

Hello,
In the composition Lightbox Display, caption is nothing but a Text Frame. You can go to any previous Target > select the caption text frame > copy it > Paste it in New target.
Regards
Vivek

When I click the new Composition Lightbox Muse crashes

-When I click the newly added (empty) composition box to work with it Muse crashes. I have 9 lightboxes and the newly created 10th composition is the one which causes the crash. All the others behave normally. The others have roll over images and text and on click they have vimeo videos, images and text in the lightbox display.
Currently I can't even click on the new composition to delete it without Muse crashing.
I have the current 7.3.5 build and I am running on macbook pro 10.9.2
Regards,
Jimmy
*Here is a link to the site and the composition light box causing the trouble is the blank one bottom right.
www.jimmymcgilchrist.com
Message was edited by: Jimmy McGilchrist

Does the crash present an error dialog? An Apple crash report? Other?
Are you using a Mac produced in 2006-2009? What version of Adobe AIR do you have installed. (The AIR version is available in the About Adobe Muse dialog.)

Muse Lightbox Editing

I'm working on building my first website in Muse. I have found that the lightbox feature is ideal for what I am trying to accomplish. Is there a way to bulk edit the different lightbox slides? I'm looking to utilize 8 different triggers that will pull up information about the products on the site, so they need to be identical. I am having difficulty copy/pasting and making them match, so a bulk edit would be extremely useful.
Any help would be greatly apprecaited.
Thanks!

Hello,
You should be able to edit the triggers together if you're using the lightbox widget from the "Slideshow" section of the Widget Library. For that you have an option in the slideshow options that says "Edit Together". It is enabled by default, check to see if it was disabled, if you're using the lightbox widget from the "Slideshow" section.
For compositions, you'll need to edit the triggers manually.
Cheers
Parikshit

Editable issues in sap interactive adobe form

Hi Experts,
we are using AdobeLiveCycle designer to create the pdf form out of sap. After creating the form to interact with sap.
When we execute the program automatically pdf will download the particular folder. In that pdf form is not an editable mode at the time. And it will change the editable mode on next day.
so, please suggest the solution to close the issues.
The following error message occurs when opening this form in Reader and attached screenshot also.
"This document enabled extended features in adobe reader the document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document "
Regards,
Satheeshkumar.M

Hello Satheesh
Is this issue resolved ?
Also mark this Discussion with a Correct Answer and Helpful Answer where appropriate.
See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why
Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be
Regards
Sandy

IPod Touch with Composite AV Cable: Issues

I purchased the new $50 composite AV cable when it was released a few months back. I've been using it frequently with no real issues (whenever I play a video, my iPod recognizes that it is connected to a TV and prompts me to choose whether or not to display the video on the TV). However, as of this week it no longer prompts me, and I cannot find a way to manually select "TV Out" without first being automatically prompted by my iPod. I recently installed 1.1.3 with the January upgrade. The only other thing I can think of that I've done differently recently is that I used the composite AV cable to charge an older iPod model, which I had never tried before, but I doubt that would have any affect on the cable itself. Anyone else having this problem? Why is there not a manual "TV Out" option for the iPod Touch to avoid this issue altogether?

I havent had any issues with my Apple AV composite cable. Ive been using it for the last month or so and has also worked since the 1.1.3 firmware and software upgrade. I suggest you call apple tech support you have a 1 year warrenty on those cables.

Apple Composite AV Cable issues

Just bought the Apple branded Composite AV Cable for my Iphone, but I'm having some issues, it works for some minutes, or seconds and then I get the message "This accessory is not made for iphone" and then the video stops to play on tv.
I'm on firmware 1.1.2, can anyone help me?

Hey cybeard,
Try using the cable without the dock. Make sure the dock connector on the iPhone is clean, brush away any dirt or lint.
You can also try restoring the iPhone, http://docs.info.apple.com/article.html?artnum=305744
If that does not work you can request repair for the iPhone or cable online here:
https://selfsolve.apple.com/GetWarranty.do
or call 1-800-MY-IPHONE
www.apple.com/support/contact/
Jason

Formscentral to Acrobat X editing issue.

I created a form in FormsCentral. I've exported it to Acrobat 10. How can I add a watermark? I "do not have sufficient privileges" to do it? Same issue with header/footers.

Hi;
This FAQ describes how to edit a FormsCentral PDF:
http://forums.adobe.com/docs/DOC-3661
Thanks,
Josh

Lightbox Image issue

Good afternoon,
I have DL and added to my website a gallery.
Within the pop up image the Prev, Next and Close.gif images are missing when I click on a image..
I can see them within DW, but not on the pop up window.
I do not have a host yet, so everything is on my internal C:/ drive.
Everything (images) is under e.g: C:users/myname/desktop/ghp1968/images/lightbox/lightbox-prev, next and close.gif
In the Jquery and lightbox JS files, the image path is /images/lightbox/lightbox-next, prev and close.gif.
This is also the path in the page that I have the gallery.
Are you able to advise where I might be going wrong.
*** Additionally, the border is white on the image pop up. Is it possible/where is it possible to change the colour.
Thanks
Gary Horne

Here is the feed:
http://feeds.feedburner.com/RockBlockPodcast
The Website:
http://www.rockblock.wordpress.com
And the iTunes link- The picture comes up here but when I search for it the purple man still comes up
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=260388815
My old podcast I did with libsyn and this is the website:
http://www.top10countdown.libsyn.com
I don't have access to the feed on my libsyn one
Message was edited by: rockblock

Extracted punctuation and editting issues in Contacts

I waited to install from 10.6.8 because of the many issues I saw/heard people were having, then I heard that it was fine and I installed 10.8.2 but wow, what a nightmare!
The most tragic issue is the new format of Address Book. First of all, the new "Contacts" application is horrendous and looks like a 1988 Corel Draw design, if Corel was around back then. What gives? I've learned that if something works—Don't fix it! Who at Apple allowed for this to go through? The staff must have had a lot of beer and wine that day! Is Apple going to turn its OS into a kiddie book because that is what this application looks like. Please return us to our original glory; there was no need for this circumcision ("to cut, about, around, and through").
First, it seems that there are the two duplicate file systems, but since I don't know what or where iCloud is, I am not willing to make that my primary backup site. So I have to read the manual about that.
Here is the actual problem, when installed, Contacts actually strips the punctuation from all my emails. This means the symbol ("@") and the periods (".") in my emails. Even though I manually try to edit this, I am not allowed to make edits in the emails!
In addition, I can no longer add new phone numbers or entries, as one would do by clicking on the green "+" symbol. The only thing I can do, is write notes, and click on the delete entries ("-").
I wonder why, with so many issues, Apple hasn't fixed this promptly, and/or returned to the previous Address Book version?

Actually I did not import, I just reinstalled the new software and it automatically did that. I have tried resetting the PRAM and that didn't do anything but as soon as I figure out where the Power button is on my wireless Apple keyboard, I will try to rest the Mac Mini, which is lacking some feature, I read somewhere, so sometimes this causes problems.

Viewing and Editing Issues with iPhoto 09

While I have enjoyed the new features of iPhoto 09 vs iPhoto 08, there are two differences that may be bugs or may be "new features." The first is that while viewing images within an event, the image zoom slider in the lower right corner of the window will no longer zoom an image to full view within the image browser. I only get a minimum of three images left to right. Any ideas why I can't zoom fully without opening the edit window or clicking on the image to zoom it to full screen (not within the image browser)?
The second question has to do with editing. When I take a portrait image and open the editing window, the image is rotated into landscape mode. This did not happen in iPhoto 08. Is anyone else seeing this? If so, is this a new "feature" or a bug?
All of all of my images are stored as RAW file format.

Thank you both.
For the image viewing, I'll accept that things sometime change. In fact, if you click once on an image so that it is highlighted, you can go in and out of zoom by touching the space bar, and then navigate with the left and right arrows at full screen.
When I encounter an image that has a rotation issue in edit, I'll use Revert to Original to fix the image.
I've been using iLife/iPhoto since they first came out years ago, and the interface generally added things, not remove them...oh, well, in iPhoto 09, the good clearly outweighs the bad. I only wish I now had a camera with built-in GPS, but I've still been having fun entering locations for all of my photos.

JDev 10.1.3 Preview Edition - Issue

The JDev 10.1.3 Preview Edition has issue with the "Go to Declaration" context command (i.e. right-click on the editor to "Go to Declaration". It does not recognize the .class syntax.
For example, the following code will have problem accessing the isAssignableFrom() declaration:
SomeClass.class.isAssignableFrom(obj.getClass());
vs.
This code will be OK:
this.getClass().isAssignableFrom(obj.getClass());

This is a WSDL file from a Web Service provider which we will have to uses as it is.
Suprisingle the same WSDL file works just fine in Jdev 10.1.2. But Jdev 10.1.2 does not create all the .java files specified by WSDL.
Jdev 10.1.3 creates all the files but does not work.

Composition Lightbox editing issues

Similar Messages

Maybe you are looking for