Compounding consistency for InfoObject 0PERSIDNO not ensured

Hi,
When i am creating multiprovider i am getting error message."Compounding consistency for InfoObject 0PERSIDNO not ensured".
In one of the affected InfoProviders, InfoObject 0PERSIDNO is compounded with InfoObject 0COUNTRY_ID. 0PERSIDNO is mapped to InfoObject 0PERSIDNO in the identification list. As a result, 0COUNTRY_ID is also mapped to 0COUNTRY_ID (because InfoObject 0PERSIDNO is compounded with 0COUNTRY_ID in the MultiProvider),
in my multiprovider i am using 2 infocubs and 1 dso.
Pls suggest me.

Hi,
A record of 0PERSIDNO master data is uniquely identified by the combination of 0PERSIDNO code and 0COUNTRY_ID code (it has a composite primary key). 
Therefore, if you include 0PERSIDNO in your Multiprovider, you should also include and map 0COUNTRY_ID.
I hope this helps you.
Regards,
Maximiliano

Similar Messages

  • Changes to Provider-specific Texts for Infoobjects are not updated

    Hi,
    We have some existing queries on one of our Multiproviders. We changed the description of one of the Info-objects on the Multiprovider using PROVIDER_SPECIFIC PROPERTIES.  This changed description is not updated into the existing queries. The existing queries still show the old description for the info-object.
    any ideas!!.
    thanks in advance.
    Naga

    Hi Pravendar,  Thanks for your response. we are using an older version of BEx Analyzer with 7.0, which does not have the check box you have mentioned.  So, I am thinking this is not going help us much.
    Hi Orla, Thanks for your suggestion. I tried this before posting here.. it did not work.
    rgds
    Naga

  • Compounding consistency problem not ensured problem in multiprovider

    I have a multiprovider MP1 which has  CUBE1 & CUBE2 as its particiapting cubes. 
    Both of these cubes has infoobject 0FUND which is compounded with 0FM_AREA and I have included both( 0FUND & 0FM_AREA) of these infoobjects in MP1 and mapped it.
    Infoobject 0FUND has attribute called MNGUNIT. I have enabled attribute MNGUNIT as navigational in multiprovider and  mapped it to same attribute from CUBE1, but to different attribute  called RESP_FC of different infoobject COSTOBJ from CUBE2 . Both MNGUNIT & RESP_FC are reffrenced to same infoobject definitiion which is also compunded with 0FM_AREA.
    MP1 syntax check gives a message that, "compounding consistency for infoobject COSTOBJ__RESP_FC not ensured". I have already tried mapping COSTOBJ__0FMA_REA from both the cubes , but it still gives same error message.
    Any solution to this problem.
    Regards
    MB

    Hi Madhukar
    Do you mean COSTOBJ is compounded with 0FM_AREA?
    I think even in that case it will be a problem as your FM area is identified from 0FUND.
    Regards
    Anindya

  • Assignmet for infoobject not maintained

    Hi all,
    I am trying to create a Multiprovider with a DSO & an INFOCUBE
    I have added the dimensions & the keyfigures.
    The infoobjects under the UNIT dimensions(0Currency & 0Unit) are not getting added automatically.
    Inspite of that I tried to activate the multiprovider.
    Now its throwing the error :
         Assignment for infoobject CST_ITEM not maintained --> long text
         Assignment for infoobject ORD_DAT not maintained --> long text
    But now I can view 0currency & 0Unit under Unit dimention. But they appear blue in color.
    & I am still getting the error.
    How can I resolve the issue?

    Hi Pallavi,
    Whenever you create a multi provider, to activate it successfully, right click on each of the key figures and click on Select (assign). This helps you determine which sources you want to consider while creating the multi provider for each of the key figures.
    For example, your multiprovider is taking fields from both a DSO and a CUBE. So, by assigning you can mention which values to pull into the multiprovider, from the DSO? CUBE? or both.
    Once you assign the source/sources to each of the key figures in the multi provider, you will be able to activate it successfully.

  • Error: Data element for InfoObject AUFNR 0PM_ORDER could not be created(QA)

    Hi Experts,
    I am trying to Transport a request from DEV to QA,which consists Transaction Infosources,  afetr the inport the TR is failed with return code 8. and the error message in the log is as follows.....
    Error when determining a number from object BI_TSDTEL and number 01  
    Object name can only contain characters from syntactical character set
    Data element for InfoObject AUFNR 0PM_ORDER could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
    Data element for InfoObject TXTMD could not be created
    Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
    please Could anyone give the Inputs to solve this , I'll be greatful to you.
    Thanks & regards
    SK

    hello AJ,
    Till now the problem is not solved , Please provide some inputs.
    here I'm getting this problem for TXTMD, 0CO_AREA, 0PM_ORDER, 0DATE, 0PLANT, 0ORDER_CURR, 0LOC_CURRCY
    Error when determining a number from object BI_TSDTEL and number 01
    Object name can only contain characters from syntactical character set
    Object name can only contain characters from syntactical character set
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Transfer structure 0CO_OM_NTW_1_SB activated under the name 0CO_OM_NTW_1_SA
    It is not necessary to copy dependent objects for transfer structure 0CO_OM_NTW_1_SA
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Activating Transfer Rules 0CO_OM_NTW_1_SA ...
    23 Transfer Rule(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
    23 InfoObject(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
    Formulas have been saved
    PLEASE PROVIDE SOME INPUTS.........
    Message was edited by:
            S K

  • [svn] 4088: Correction for FXG - SWF transcoding - ensuring various types of shapes are consistently handled .

    Revision: 4088
    Author: [email protected]
    Date: 2008-11-12 11:59:22 -0800 (Wed, 12 Nov 2008)
    Log Message:
    Correction for FXG -> SWF transcoding - ensuring various types of shapes are consistently handled. The x and y properties will be applied via translation in a PlaceObject3 matrix rather than modifying the shape origin.
    QE: No
    Doc: No
    Checkintests: Pass
    Modified Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/AbstractFXGGraphics.java

  • Not getting texts for infoobject 0CPR_STAT1 (cProject- System Status)

    Hi All,
    We are not getting texts for infoobject 0CPR_STAT1 (cProject->System Status), 0CPR_STAT2, 0CPR_STAT3. Even in source system r/3 there are no records and our function team doesn't  no how to get the records in that data source.
    DATA SOURCE NAME 0DPR_STSYS1_TEXT, 0DPR_STSYS2_TEXT, 0DPR_STSYS3_TEXT
    Can anyone suggest.
    Thanking you in anticipation.
    Regards
    Vandana

    Please check these links for the table names:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ea/1847ff9624314e9bc7601b890b662a/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/c71c047b24014aac52785bf42aee83/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b8/5cec634da16f4da2861aeb9e6f966e/frameset.htm
    Hope this helps...

  • Authorization checked for infoObjects even though not relevant to report

    Hello guys,
    I am facing a problem in BI 7.0 authorization checks.
    For a given report the BI team has placed a restriction in the query only for infoObject 0Comp_code (company code) and 0SOLD_TO (sold to party). Accordingly i have created authorization in RSECADMIN and assigned to role--> user.
    But when the user runs the report, he gets as authorization error and during analysis in RSECADMIN i see that "list of Authorization relevant charecteristics(infoObjects) for info provider xxxx" contain other infoObjects as well.
    Is it a case where infoObjects can be made authorization relevant for the whole  info provider eg-ZSD_M42" (where this is a multi provider)apart from being checked for specific reports eg- ZSD_M42_Q0001?
    How do i get around this problem?
    Regards,
    Prashant

    Hi Prashanth,
    What Zaheer said was exactly correct.Make sure all the Auth relevant Chaaracteristics of an Infoprovider  are properly authorized through your Analysis Authorization.Suppose if you don't need security on other Characteristics of an InfoProvider give * in your AA which will byepass check on that particular Auth relevant Characteristics..
    More over,See to that all the key figures are properly authorized as all the keyfigures are by default auth relevant in BI.
    Cheers,,
    Ramkumar C

  • The kind infoobject does not exist in the CMS

    hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
    the kind infoobject does not exist in the CMS
    the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
    then i found some error explanation
    Cause
    The InfoObject type does not exist in the CMS
    Action
    Ensure that the InfoObject type is propertly installed.
    and
    Cause
    An InfoObject type is missing.
    Action
    Ensure that the XSD for this type of InfoObject is installed.
    I want to know how to reinstall the infoObject type.
    or any other idear on this.
    thanks all.
    Ada

    WHat's the exact version of the source and the target BO system?
    Regards,
    Sratos

  • Metadata for InfoObject 0CURKEY_LC is inconsistent

    Hello experts,
    when executing a query containing 0currency or an infoobect refferring to 0currency the following error message occurs:
    AMetadata for InfoObject 0CURKEY_LC is inconsistent
    I>> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
    The problem probably came from a master data upload from flatfile containing a wrong currency.
    How can you put 0currency into a consistant state again?
    Angie

    Hi,
    The problem probably came from a master data upload from flatfile containing a wrong currency.
    Please try below,
    1) GO to RSRV transaction and perform all tests for master data infoobjects. Check out what error it gives. Many times RSRV also corrects the error. You will get correct error option above the error description.
    OR
    2) Try deleting the erroneous recor. If it is incorrect record, it must not be used in any transactional data. SO it should allow you to do that. Then activate the master data.
    Let me know if you need more info.
    Regards,
    Viren

  • Testing Delta Consistency for write-optimized DSO

    Hi,
    Please do let me know how to carry  testing for delta consistency for write-optimized DSO.
    Is it just to check whether the check box under the settings.. "Check Delta Consistency " is checked or the other way.
    Please do let me know.
    Thanks & Regards,
    Lavanya.

    Hi,
    The delta consistency flag for W-O DSO is used to ensure data consistency between the w-o DSO and any target propagated to. zfor example, you have dataflow ZWDSO1 -> zsdso1. ZWDSO1 has the flag 'check delta consistency' set to ON. You load data from ZWDSO1 to ZSDSO1 via request 1.
    When the load is successful, if you try to delete the request 1 from ZWDSO1, deletion should not be possible; also you will not be able to change the flag to OFF as delta has already been propagated, and if you change the flag, delta consistency might be lost!
    Now, if you delete request 1 from ZSDSO1 and then try to delete request 1 from ZWDSO1, deletion should be possible.
    Hope the explanation helps!
    Regards,
    Rakesh

  • Error: InfoObject does not contain alpha-conforming value 20030729

    Hi everyone,
    I got this problem, that i tried to fix yesterday, but all i did was that i got realy frustrated...
    I created an infoobject which is copy of 0DOC_NUMBER and has alpha coversion routine.
    Mapping field in DataSource is also type character 10(VBELN) as my infoobject.
    But there are some values in this field that i am trying to load, less then 10 characters long (20030729,20051116...) and shouldn't be there, because the values are dates and not document numbers.
    But anyway on R/3 side this values are in field which is defined as character 10 (VBELN), and when I am trying to load Infopackage(17500 records) I get 52 errors: InfoObject does not contain alpha-conforming value 20030729.
    I don't get it, since both fields are type character 10 and the values are only digits, why do I get this error message and how can I fix it?
    PS:One solution is to remove alpha conversion routine from infoobject, but i don't want that.
    Regards,
    Uroš

    hi,
    sorry... correction, it's 'Exclusive attributes' that cannot be used for navigational attribute, you can set lower case to differentiate ... check the impact of lower case setting here ...
    http://help.sap.com/saphelp_bw33/helpdata/en/b7/f470375fbf307ee10000009b38f8cf/frameset.htm
    Lowercase letters allowed / not allowed
    If this indicator is set, the system differentiates between lowercase letters and capital letters when you use a screen template to input values. If this indicator is not set, the system converts all the letters into capital letters when you use a screen template to input values.
    If you choose to allow the use of lowercase letters, you must be aware of what happens when you input variables:
    If you want to use the characteristic in variables, the system is only able to find the values for the characteristic if the lowercase letters and the capital letters are typed in accurately on the input screen for variables. If, on the other hand, you do not allow the use of lowercase letters, any characters that you type onto the input screen, are converted automatically into capital letters.
    Exclusive attributes:
    If you select Exclusively Attributes, the created characteristic can be used only as a display attribute for another characteristic, and not as a dedicated characteristic in the InfoCube. Furthermore, you then cannot transfer the characteristic into InfoCubes. However, you can use it in ODS objects or InfoSets.

  • Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in versn D.

    Hi friends ,
    I am getting below error while doing the BI Content Activation.Please guide me for possible solution :this is for two three infoobjects.Do in need to reconfigure the system??
    Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version
    'D'
        Message no. RSO252
    Diagnosis
        You wanted to generate an object with the name '0DB87SIC1' (in transport
        request IOBJ) of type 'InfoObject' (TLOGO). This is, however, not
        available in the BW Repository database. It does not exist in the
        requested version D. If the version is 'D' then it is possible that an
        error arose during the delivery or installation. If the version is 'A'
        then the Object was either not created or not activated.
    System Response
        The object was not taken into account in the next stage of processing.

    hi,
    This is not an error but while installing bunch of infoobjects, it will say which one of them it doesnot have in the system could be the problem in patches.Could be very old.
    Hence better you create a infobject equivalent of the object you require and use it and goahead.
    Thanks
    Kumar

  • Error: Infoobject is not defined in the source system

    hi
    (I posted this in other forums as well - but wondering, it it should be here in BCT/Extractors - I could use more help).
    this is my issue:
    I am trying to load master data (attr) for an infoobject.
    But, it fails with the following error message (when I click on the "Error message" button on the "monitor" screen.
    "Infoobject is not defined in the source system"
    "Erros in source system".
    (I did rsa3 and find it has some data + i checked on the base table as well, it has data; the datasource is from an SRM system) Why is it complaining like this.
    any help on what could be wrong here? Pl let me know,
    thanks

    Thanks Ricardo,
    I have tried that b4. and it says the "source system connection is OK".
    any other idea?
    Do I have to install the infoobjects on the source system as well? SRM is my source system.. I am not sure on that, but If I have to, how do I do that?
    thanks
    Message was edited by: Esan

  • Error in global conversion rule for InfoObject 0PERSLANGU when activating

    Dear Experts
    We are working on HR in BI7.0 with Ehp1.
    I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
    When trying to Activate, it gives the following error message:
    Error in global conversion rule for InfoObject 0PERSLANGU
    Message no. RSAR263
    Diagnosis
    Errors with the global conversion rule for the field 0PERSLANGU.
    System Response
    The function module delivers the following error message:
    Incorrect statament: Expression missing Operand mi
    Procedure
    Check the definition of the global conversion rule for an InfoObject.
    In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
    Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
    Many Thanks,
    Chandu

    HI Chandu ,
    It is a bug in the system , can you take a look at the SAP note
    Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
    Hope it helps ,
    Regards,'
    Sathya

Maybe you are looking for