Compounding Controlling areas and Cost Centers
Hi,
We have only one Controlling area value, say ZC11. I am looking at an InfoObject Master Data table for an InfoObject, and it seems that there are no differences in the records with the Controlling area and Cost Centers with those of blank Controlling areas and Cost Centers.
Is it necesary to define the compounded InfoObject of the Controlling Area to the Cost Centers in this case? I understand that compounding is for use if there are many different Controlling Areas for the same Cost Centers.
What would be the best approach on this?
Thanks,
RT
Hi Bhanu,
May I ask what would be the core change of the SAP InfoObject? I would think that modeling wise, it would be beneficial to not compound if there was just one Controlling area.
I am actually uploading data and I am getting an error that lists the error "value Cost Center/Controlling Area/ Company code is not permitted for characteristics Company Code". I am sending only the value Cost Center but somehow it is looking for the Controlling Area. Should I be sending both the Controlling area and its correspdoning Cost Center?
Thanks,
RT
Message was edited by: Rob Thomas
Similar Messages
-
Controlling Area and Responsible cost center
Hi,
is it possible to find out "Controlling Area" and "Responsible cost center"to SAP USER
Friendly regards
AlexanderI finf out :
DB Table -> CSKS -
Report painter- business area and Cost center
Hi All,
we have a requirement to create the Report painter report where in the Revenue will be By business area and cost of the particular cost center by Cost element.
i.e revenue by Business area against cost by department.
It it possible to use report painter to create such report?. when i was going through the report painter it does not allow me to pull the cost by department .
Best regards
Rajesh dhulipallaHi,
Business consolidation is for more of consolidation purpose and cost center grouping is more for management reporting purpose for cost control purposes.
Both the organizational units serve for different purposes. Consolidatied business will not have much meaning unless you go with EC-CS.
Cost Center Groups are much for control purpose and help in managerial reporting.
Business Units are part of FI Organizational Structure and Cost Centers are part of CO organizational structures.
Regards,
Ravi -
Default values for the controlling area and language
Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant GokhaleHello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks. -
Combination of cost elements and cost centers
Hi guys,
what if I mentioned only cost centers as sender values in a segement of assessment cycle? do you think that is must to have cost element and cost center combination in sender values? how it will be differnt I dont mention any cost elements along with cost center in segements as sendors? please clarify me with the example.Hi
Cost Centers are the cost collectors and cost elements are the cost carriers.
When you add cost elements and cost centers as senders you define that the cost that are available in the cost centers are carried to other cost objects via the cost elements.
Hope it helps
Good Luck
Hari -
Hide Controlling Area from Cost center in report
Hi Experts,
I have Costcenter as reporting field in BW report. Controlling Area is compunding char for Cost center.
In the report, it shows both values (cost center and controlling area) when i use cost center in query. foreg. KO01/C123456 as key.
(KO01 is controlling area and C123456 is Cost center)
Is there any way to ONLY display Costcenter value in report??
Thanks in advance.
-AbhijitYou can add controlling area IO in the line and hide it (in properties set never display) or you can also insert it in filter with fix value KO01.
Hope it helps.
Regards -
Restrict access in report based on compnay codes and cost centers
Hi,
We are using a standard report, which is assigend to a Z transaction and assigend to the role.
The report need to be restricted based on the company code and cost center ?
but i could not find any AUTHORITY- CHECK statements in the code ( there is only authority check statement for object G_803J_GJB which has authorization groups and aCTVT field.)
Please let me know what steps need to be followed to restrict the report based on company codes and cost centers.
Thanks for your help in advance.Thanks all for the quick response.
Steps to be followed:
1) incorporatomg AUTHORITY-CHECK statements for K_KOSTL and F_BKPF_BUK objects in the program.
2) adding the objects as check yes in SU24 for the Z transaction.
and restricting in the role.
The program name is "GP3O4ZGOOF3HA68QMGHF8S7I9ER250".
Please let me know if any more steps need to be followed.
Based on this i have to send a estimate to my client.
Thanks,
Sanketh. -
ZGPGL - Copying Accounts and Cost Centers to the SAP system
Hi all,
When I try to copy accounts and cost centers from my excel mapping document to the SAP system I can only copy about 20 of them at a time. I have about 30,000 accounts and am wondering if there is a quicker way to do this.
Thanks,
DekiWrite a catt script to create the GL account and cost center master data. they are relativley easy to learn and create. They work great for this. I have used them several times for that purpose.
pls assign points to say thanks. -
Functional area and cost of sales accounting (company code 2000) active
Hi There!
I hope someone can help.
In our sandbox system, whenever I try to convert a Purchase requistion into a Purchase Order I get the following error message : "Functional area and cost of sales accounting (company code 2000) active".
Anyone know how I can resolve this issue?
Kind regards,
KarlHi,
Double click on the error message & check the message Number..
Then go to
Spro>MM>Pur
Attributes of system messages & change the Message from Error to Warning..
Thx
Raju -
Cost center , valuation area and cost element
Hi ,
i use OKB9 to access relationship for cost element and cost center, where can i find table for detail business area/valuation area and cost center , as in OKB9 ineed to drill in one by one to check the data .
ThanksHello Aik
Check MARA table, you would find all the fields.
Reg
assign points if useful -
Pls Send Some Good Doc's on Business Area and Cost Center
Dear Gurus,
<b>Pls Send Some Good Doc's on Business Area and Cost Center.
My mail id is [email protected]</b>
Its Very Urgents.
Regrds
MaheshHello
Check these help links
For Business area:
http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
For Cost Center
http://help.sap.com/erp2005_ehp_02/helpdata/en/0b/2a623f507d11d18ee90000e8366fc2/frameset.htm
Reg
*assign points if useful -
What is the impact of business area and cost center in the sales document
Hi all
I have small doubt regarding what is the impact of bussiness area and cost center in the sales document... what is the uses of these (bussiness area, cost center) is help full for sd module
can any one reply plz....
Thanking youHi,
Business Area determines where the revenue should be allocated when you sell a material or a service.
For eg: If your customer is in say Mumbai and he is ordering for a service in Delhi (say DIAL - Delhi International Airport Limited) then based on the terminology.
Your customer would belong to B Basis Business Area - WHERE THE REVENUE IS COMING FROM or WHERE YOUR CUSTOMER BELONGS TO (SALES OFFICE).
Whereas your DIAL sales will belong to A Basis Business Area - WHERE THE REVENUE IS GOING TO.
Cost Center would determine where your allocate your cost to.
Say Rounding Off can be used as a cost element, because some sort of revenue is lost when figures are roudned off..
Hope it clarifies your doubt.
Reward points if satisfactory
Regards
Ravi.D.Mansharamani -
How to obtain profit centers and cost centers for a particular GL account
Hi Gurus
Can you please suggest me a table or a function module to obtain profit centers and cost centers for a particular GL account.
Thanks in advance for help!
Regards
AnkitHi There, I have a simillar problem as above, however I would like a list of all G/L Accounts with profit centres and cost centres as well. Is this possible? Reason being that I have many unassigned cost centres and need to link them to profit centres.
Is there also a mass processing list to see which G/L accounts dont have primary elements assigned?
Regards,
Edited by: Luke Saloojee on Jul 29, 2008 8:12 AM -
Validations for G/L accounts and Cost Centers!
Help!!!
I need to create bunch of validations:
Ex. If account is 12345 - then is can be posted to only cost center XXX, YYY, ZZZ, BBB...
If G/L account is 33333 - then it can be posted to cost centers AAA and BBB...
There are different rules for 137 accounts.
Here are the questions:
1. Is it all one validation and 137 steps or are these all different validations?
2. How can i limit one G/L to many cost centers? What is the formula? It doests let me post If account is 12345 then check cost Center XXX OR YYY OR ZZZ OR....
It lets me post "OR" only one time.
Do i need to create a Set for each validation from GS01? or is there any easier formula? - It is not the range of cost centers, they are just random!
Please help!!!!!!!!!!!!!!!!!!!!I did exacly that!
I created a SET.
Then i went to validation and said preriqisites - account "XXX"
Check Cost center IN SET
Message - Error
I attached my validation to my company code and put it as Active in OB28
I even ran the program RGUGBR00 to activate all the sets and validations...
Now i test it and it is still posting to any cost center.
What did i miss? -
Profit centers and cost centers - language maintenance
Hi!
We have an SAP environment running where three countries use local languages and the fourth one uses English, also most people working centrally with the system uses English. Also the hierarchies are exported to BI from the English language version of the system. Thus we have a need to maintain names of hieararchy nodes and profit centers/cost centers in several languages.
Is there any easier way to do this than logging in to all relevant language versions (usually one local and English) to maintain these? Is there some setting that makes it enough to maintain in for instance the English version and it updates all the other languages?
Best regards,
Jan PetterssonNot really the answer I was hoping for
it's business side users in each country maintianing the hieararchies and PC/CC... so LSMWs and imports and exports is unfortuntantely not the best of options.
Hoping for someone else with a similar situation with additonal ideas.
Maybe you are looking for
-
I have uninstalled the flash player and installed it numerous times with no recognition by the Firefox plug-ins. I also have uninstalled Firefox and reinstalled it as well. I have also restarted my computer several times as well. The flash player is
-
Hi I am new to iMovie - and made a 35min film - quite pleased with it - I sub-titled it right through coz we work with deaf people - wanted my first movie to be accessible. Now I want to change the font on each clip - can I do this in one step - and
-
Usage of widening cast in abap oops
hi experts, I understood the widening cast concept. i want to know in what scenarios, the usage of widening cast makes sense. does the widening improve performance of the program? is there any scenario where we MUST use the widening cast in the logic
-
Hello gurus Could anyone please send me any documents regarding the BW retail implentation.. i hve the PDF but i need some more if any available. Also could anyone send me the link for 2LIS_40_REVAL from saphelp. regards Ram
-
Skype Number, Calling out and in
Hi Skype Community I wan't a Skype Number for my webshop and need to know. If I have a Skype number. Can I call to others? and can my customer call me?