Comprehensive list of EP timeout parameters?
I'm looking to document and comparing timeout parameters across our landscape of 7.3 enterprise portals. However I cant find a list of relevant parameters to look for. Other than the "session.invalidation.timeout" parameter, what other timeout controls come into play? Any pointers/suggestions would be appreciated. -Thanks in advance.
Just wanted to update this.
Because I use Business Objects OEM, I didn't have direct support with SAP/Business Objects. However, because of this issue (and other issues) we purchased Business Objects Edge 3.0.
After getting BOE 3 installed/configured, I migrated those reports and underlying Business Views over.
And guess what? The problem still occurred on the new platform.
I then created a support incident and the person that initially tried to help me couldn't figure out what was going on.
However, during that time, I did try re-creating the report using a newer version of Crystal (Crystal 2008) and the problem went away. (note, I didn't recreate the business views.. just the reports).
So bottom line:
I created all reports from scratch instead of using the reports that I migrated from BO XI R2/CR XI and no longer had the problem.
The techs never figured out the exact cause of the issue.
So far, my experience with their support has been the same on all incidents. They don't seem to be trained (at least at the 1st level) for actually using the debug/logs/etc to help quickly pinpoint/analyze issues. They do basically like I do (the end user) and smartly poke around and do trail/error. I have yet to get a support tech that knew the exact nature of my issue and could solve it without this kind of trial/error approach.
Similar Messages
-
Where is there a comprehensive list of icons that shows what each stands for, represents, or means?
Specifically the small box near the pointing mouse or hand.That small box is probably the tooltips box discussed in the following thread. See if '''cor-el''''s solution works for you as it did for the original poster in that thread.
https://support.mozilla.com/en-US/forum/1/544389? -
Where is a comprehensive list of error codes?
I keep looking for a comprehensive list of all error codes sorted by number. If, for example, something reports an error like "An error of type -1409 has occurred.", it seems there must be a list somewhere of descriptions of errors of type -1409. Is there? Does such a list exist?
If not, can you help me understand why not?
--GilThanks for the suggestions. I sent Kevin a message...
Hi, Kevin--
Thank you for compiling a very large list of Mac error codes. I just got one that's not on your list, -1409. I'm not sure what caused it. I got it when I tried to run an AppleScript...
set aFileRef to open for access file "MBProHD:Users:gil:aPackage"
where aPackage was a package, instead of a file. Not sure what it means.
--Gil
I tried Googling "An error of type -1409 has occurred." It got a large number of hits; however most were of the form "Try this and see whether it goes away." In other words, no definition. Then I found one thread where a Senior Member posted a definition without attribution...
Error: -1409
Macintosh system error (-1409) * Named fork does not exist */ error
The info we have on this error means that some part of the OS is damaged or missing, (assuming that the HD directories & such aren't messed up). Try reinstalling the last big combo update from Apple. It's possible that you will have to do an "Archive & Install" to repair your system files.
Now we're getting somewhere, but where did he get that definition? The source seems to be a 2010 message on the Adobe Reader Bulletin Board. The contributor's email is marked "private" and it's not obvious how to reach him or her.
Thanks, WZZZ, for your helpful suggestion.
Back to my original question -- Where's the list? -- I guess we're all disappointed to learn that none of us knows where some Apple employee keeps it.
--Gil
P.S.-- I just got word back from Mail about my message to Kevin...
Delivery to the following recipient failed permanently:
[email protected]
Ah, well. Guess I'm ready to give up now.
--Gil
Message was edited by: Gil Dawson -
Oracle: 11.2.0.3 non-RAC (Oracle Restart grid home)
OS: RHEL Server 5.8
Can timeout parameters be set for an ASM instance or for any downstream database instances dependent on an ASM instance? Our storage and sysadmins ran a test (failing over a controller). The Oracle database instance detected a problem reaching +FLASHREC on the NetApp device (it was trying to access a control file evidently). Approximately one second later the database instance decided to terminate itself. The ASM instance remained up. But subsequent checking with ASMCD showed no ASM Diskgroup available using an LS command. After bouncing the ASM instance all was well--the diskgroups reappeared and we were able to restart our database instance. A second seems a bit unforgiving. Can any timeout-related parameters be set on the ASM or ASM-client instance to provide more wiggle room during a controller failover?
Some errors we encountered from the database instance alert log. Further below are errors from the ASM instance's alert log
Wed Mar 14 04:00:55 2012
Archived Log entry 89 added for thread 1 sequence 142 ID 0xbb0a69f4 dest 1:
Wed Mar 14 17:51:06 2012
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>ckpt310.trc:
ORA-27072: File I/O error
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Additional information: 120864
Additional information: -1
WARNING: Read Failed. group:2 disk:0 AU:59 offset:16384 size:16384
Wed Mar 14 17:51:06 2012
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>arc2399.trc:
ORA-27072: File I/O error
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Additional information: 120864
Additional information: -1
WARNING: failed to read mirror side 1 of virtual extent 0 logical extent 0 of file 256 in group [2.2142222202] from disk FLASHREC_0000 allocation unit 59 reason error; if possible, will try another mirror side
WARNING: Read Failed. group:2 disk:0 AU:59 offset:16384 size:16384
WARNING: failed to read mirror side 1 of virtual extent 0 logical extent 0 of file 256 in group [2.2142222202] from disk FLASHREC_0000 allocation unit 59 reason error; if possible, will try another mirror side
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>ckpt310.trc:
ORA-00202: control file: '+FLASHREC/<instance name here>/controlfile/current.256.776099703'
ORA-15081: failed to submit an I/O operation to a disk
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>arc2399.trc:
ORA-00202: control file: '+FLASHREC/<instance name here>/controlfile/current.256.776099703'
ORA-15081: failed to submit an I/O operation to a disk
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>ckpt310.trc:
ORA-27061: waiting for async I/Os failed
Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 16384
WARNING: Write Failed. group:2 disk:0 AU:59 offset:49152 size:16384
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>ckpt310.trc:
ORA-15080: synchronous I/O operation to a disk failed
WARNING: failed to write mirror side 1 of virtual extent 0 logical extent 0 of file 256 in group 2 on disk 0 allocation unit 59
Wed Mar 14 17:51:06 2012
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>m00023737.trc:
ORA-27072: File I/O error
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Additional information: 120864
Additional information: -1
WARNING: Read Failed. group:2 disk:0 AU:59 offset:16384 size:16384
WARNING: failed to read mirror side 1 of virtual extent 0 logical extent 0 of file 256 in group [2.2142222202] from disk FLASHREC_0000 allocation unit 59 reason error; if possible, will try another mirror side
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>m00023737.trc:
ORA-00202: control file: '+FLASHREC/<instance name here>/controlfile/current.256.776099703'
ORA-15081: failed to submit an I/O operation to a disk
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>ckpt310.trc:
ORA-00206: error in writing (block 3, # blocks 1) of control file
ORA-00202: control file: '+FLASHREC/<instance name here>/controlfile/current.256.776099703'
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>ckpt310.trc:
ORA-00221: error on write to control file
ORA-00206: error in writing (block 3, # blocks 1) of control file
ORA-00202: control file: '+FLASHREC/<instance name here>/controlfile/current.256.776099703'
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
CKPT (ospid: 310): terminating the instance due to error 221
Errors in file /u01/app/oracle/diag/rdbms/<instance name here>/<instance name here>/trace/<instance name here>m00023737.trc:
ORA-00204: error in reading (block 1, # blocks 1) of control file
ORA-00202: control file: '+FLASHREC/<instance name here>/controlfile/current.256.776099703'
ORA-15081: failed to submit an I/O operation to a disk
Wed Mar 14 17:51:07 2012
License high water mark = 8
Instance terminated by CKPT, pid = 310
USER (ospid: 24054): terminating the instance
Instance terminated by USER, pid = 24054
Some errors we encountered from the ASM instance alert log
Mon Mar 12 14:56:18 2012
NOTE: ASMB process exiting due to lack of ASM file activity for 305 seconds
Wed Mar 14 17:51:06 2012
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_gmon_27396.trc:
ORA-27072: File I/O error
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Additional information: 4088
Additional information: -1
WARNING: Write Failed. group:1 disk:0 AU:1 offset:1044480 size:4096
WARNING: Hbeat write to PST disk 0.3916384140 (DATAFILE_0000) in group 1 failed.
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_gmon_27396.trc:
ORA-27072: File I/O error
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Additional information: 4088
Additional information: -1
WARNING: Write Failed. group:2 disk:0 AU:1 offset:1044480 size:4096
WARNING: Hbeat write to PST disk 0.3916384141 (FLASHREC_0000) in group 2 failed.
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_gmon_27396.trc:
ORA-27072: File I/O error
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Additional information: 4088
Additional information: -1
WARNING: Write Failed. group:3 disk:0 AU:1 offset:1044480 size:4096
WARNING: Hbeat write to PST disk 0.3916384142 (TEMPFILE_0000) in group 3 failed.
Wed Mar 14 17:51:06 2012
NOTE: process b000+asm (23739) initiating offline of disk 0.3916384140 (DATAFILE_0000) with mask 0x7e in group 1
WARNING: Disk 0 (DATAFILE_0000) in group 1 in mode 0x7f is now being taken offline on ASM inst 1
NOTE: initiating PST update: grp = 1, dsk = 0/0xe96f478c, mask = 0x6a, op = clear
Wed Mar 14 17:51:06 2012
NOTE: process b001+asm (23753) initiating offline of disk 0.3916384141 (FLASHREC_0000) with mask 0x7e in group 2
WARNING: Disk 0 (FLASHREC_0000) in group 2 in mode 0x7f is now being taken offline on ASM inst 1
NOTE: initiating PST update: grp = 2, dsk = 0/0xe96f478d, mask = 0x6a, op = clear
GMON updating disk modes for group 1 at 13 for pid 20, osid 23739
ERROR: no read quorum in group: required 1, found 0 disks
Wed Mar 14 17:51:06 2012
NOTE: process b002+asm (23791) initiating offline of disk 0.3916384142 (TEMPFILE_0000) with mask 0x7e in group 3
WARNING: Disk 0 (TEMPFILE_0000) in group 3 in mode 0x7f is now being taken offline on ASM inst 1
NOTE: initiating PST update: grp = 3, dsk = 0/0xe96f478e, mask = 0x6a, op = clear
GMON updating disk modes for group 2 at 14 for pid 23, osid 23753
ERROR: no read quorum in group: required 1, found 0 disks
Wed Mar 14 17:51:06 2012
NOTE: cache dismounting (not clean) group 1/0x7FAFB779 (DATAFILE)
NOTE: messaging CKPT to quiesce pins Unix process pid: 23826, image: oracle@dot-oraprd04 (B003)
Wed Mar 14 17:51:06 2012
NOTE: halting all I/Os to diskgroup 1 (DATAFILE)
Wed Mar 14 17:51:06 2012
NOTE: LGWR doing non-clean dismount of group 1 (DATAFILE)
NOTE: LGWR sync ABA=6.6196 last written ABA 6.6196
NOTE: cache dismounted group 1/0x7FAFB779 (DATAFILE)
SQL> alter diskgroup DATAFILE dismount force /* ASM SERVER */
Wed Mar 14 17:51:06 2012
NOTE: cache dismounting (not clean) group 2/0x7FAFB77A (FLASHREC)
NOTE: messaging CKPT to quiesce pins Unix process pid: 23836, image: oracle@dot-oraprd04 (B004)
NOTE: halting all I/Os to diskgroup 2 (FLASHREC)
NOTE: LGWR doing non-clean dismount of group 2 (FLASHREC)
NOTE: LGWR sync ABA=5.1120 last written ABA 5.1120
GMON updating disk modes for group 3 at 15 for pid 25, osid 23791
ERROR: no read quorum in group: required 1, found 0 disks
NOTE: cache dismounted group 2/0x7FAFB77A (FLASHREC)
SQL> alter diskgroup FLASHREC dismount force /* ASM SERVER */
Wed Mar 14 17:51:06 2012
NOTE: cache dismounting (not clean) group 3/0x7FAFB77B (TEMPFILE)
NOTE: messaging CKPT to quiesce pins Unix process pid: 23838, image: oracle@dot-oraprd04 (B005)
NOTE: halting all I/Os to diskgroup 3 (TEMPFILE)
NOTE: LGWR doing non-clean dismount of group 3 (TEMPFILE)
NOTE: LGWR sync ABA=6.11 last written ABA 6.11
NOTE: cache dismounted group 3/0x7FAFB77B (TEMPFILE)
SQL> alter diskgroup TEMPFILE dismount force /* ASM SERVER */
WARNING: Offline of disk 0 (TEMPFILE_0000) in group 3 and mode 0x7f failed on ASM inst 1
WARNING: Offline of disk 0 (DATAFILE_0000) in group 1 and mode 0x7f failed on ASM inst 1
WARNING: Offline of disk 0 (FLASHREC_0000) in group 2 and mode 0x7f failed on ASM inst 1
Wed Mar 14 17:51:07 2012
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
Wed Mar 14 17:51:07 2012
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
Wed Mar 14 17:51:07 2012
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ASM Health Checker found 1 new failures
ASM Health Checker found 1 new failures
ASM Health Checker found 1 new failures
Wed Mar 14 17:51:07 2012
NOTE: ASM client <instance name here>:<instance name here> disconnected unexpectedly.
NOTE: check client alert log.
NOTE: Trace records dumped in trace file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_322.trc
Wed Mar 14 17:51:07 2012
NOTE: cache deleting context for group FLASHREC 2/0x7fafb77a
NOTE: cache deleting context for group TEMPFILE 3/0x7fafb77b
NOTE: cache deleting context for group DATAFILE 1/0x7fafb779
GMON dismounting group 2 at 16 for pid 27, osid 23836
GMON dismounting group 1 at 17 for pid 26, osid 23826
NOTE: Disk in mode 0x8 marked for de-assignment
GMON dismounting group 3 at 18 for pid 28, osid 23838
NOTE: Disk in mode 0x8 marked for de-assignment
NOTE: Disk in mode 0x8 marked for de-assignment
SUCCESS: diskgroup FLASHREC was dismounted
SUCCESS: alter diskgroup FLASHREC dismount force /* ASM SERVER */
SUCCESS: diskgroup DATAFILE was dismounted
SUCCESS: alter diskgroup DATAFILE dismount force /* ASM SERVER */
SUCCESS: diskgroup TEMPFILE was dismounted
SUCCESS: alter diskgroup TEMPFILE dismount force /* ASM SERVER */
ERROR: PST-initiated MANDATORY DISMOUNT of group TEMPFILE
ERROR: PST-initiated MANDATORY DISMOUNT of group FLASHREC
ERROR: PST-initiated MANDATORY DISMOUNT of group DATAFILE
Wed Mar 14 17:51:07 2012
NOTE: diskgroup resource ora.FLASHREC.dg is offline
NOTE: diskgroup resource ora.DATAFILE.dg is offline
NOTE: diskgroup resource ora.TEMPFILE.dg is offline
Wed Mar 14 17:51:08 2012
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_24250.trc:
ORA-17503: ksfdopn:2 Failed to open file +DATAFILE/<instance name here>/spfile<instance name here>.ora
ORA-15001: diskgroup "DATAFILE" does not exist or is not mounted
Wed Mar 14 17:51:08 2012
SQL> ALTER DISKGROUP FLASHREC MOUNT /* asm agent *//* {0:5:72} */
NOTE: cache registered group FLASHREC number=1 incarn=0xfa7fb7ea
SQL> ALTER DISKGROUP FLASHREC MOUNT /* asm agent *//* {0:5:72} */
NOTE: cache registered group FLASHREC number=1 incarn=0xfa7fb7ea
NOTE: cache began mount (first) of group FLASHREC number=1 incarn=0xfa7fb7ea
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_27411.trc:
ORA-27061: waiting for async I/Os failed
Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 4096
WARNING: Read Failed. group:0 disk:1 AU:0 offset:0 size:4096
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_27411.trc:
ORA-27061: waiting for async I/Os failed
Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 4096
WARNING: Read Failed. group:0 disk:0 AU:0 offset:0 size:4096
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_27411.trc:
ORA-27061: waiting for async I/Os failed
Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 4096
WARNING: Read Failed. group:0 disk:2 AU:0 offset:0 size:4096
ERROR: no read quorum in group: required 2, found 0 disks
NOTE: cache dismounting (clean) group 1/0xFA7FB7EA (FLASHREC)
NOTE: messaging CKPT to quiesce pins Unix process pid: 27411, image: oracle@dot-oraprd04 (TNS V1-V3)
NOTE: dbwr not being msg'd to dismount
NOTE: lgwr not being msg'd to dismount
NOTE: cache dismounted group 1/0xFA7FB7EA (FLASHREC)
NOTE: cache ending mount (fail) of group FLASHREC number=1 incarn=0xfa7fb7ea
NOTE: cache deleting context for group FLASHREC 1/0xfa7fb7ea
Wed Mar 14 17:51:08 2012
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
ERROR: -9(Error 27061, OS Error (Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 512)
GMON dismounting group 1 at 20 for pid 18, osid 27411
ERROR: diskgroup FLASHREC was not mounted
ORA-15032: not all alterations performed
ORA-15017: diskgroup "FLASHREC" cannot be mounted
ORA-15063: ASM discovered an insufficient number of disks for diskgroup "FLASHREC"
ORA-15080: synchronous I/O operation to a disk failed
ORA-15080: synchronous I/O operation to a disk failed
ORA-15080: synchronous I/O operation to a disk failed
ERROR: ALTER DISKGROUP FLASHREC MOUNT /* asm agent *//* {0:5:72} */
ASM Health Checker found 1 new failuresThanks Dan. The server had been built recently but not yet released. Testing was uncoordinated but no permanent harm was done. Great group of people and NetApp is new to them. Glad they are testing things like controller failover. But it sounds like ASM may be a victim and not the culprit. If ASM remains suspect during continued failover testing I'll consider opening an SR like you suggested.
-
Comprehensive list of Visual C++ breaking changes in Visual Studio
Where can I find a comprehensive list of Visual C++ breaking changes in Visual Studio 2008 and Visual Studio 2010?
The list of breaking changes mentioned in MSDN is not exhaustive.
I would narrate a small incident where I felt the need of having such an exhaustive list.
A third party developer was using the older version of my application which is built in Visual Studio 2005. He was trying to build his own DLL using the API exposed by my application, but in Visual Studio 2010.
The API, unfortunately passes STL objects viz. std::string. We know this is
catastrophic and evidently the third party developer encountered run-time issues with his code- a crash during string manipulation.
After some digging I discovered that that the binary layout of Visual Studio 2005 std::string is different from the Visual Studio 2010 version.
For reasons best known to the third party developer, he was not able to move back to Visual Studio 2005 and insisted on using Visual Studio 2010. For the above issue I suggested him a workaround for std::string manipulations( create a new string class that
will emulate the memory layout of Visual Studio 2005 std::string).
Likewise, I would like to know all the changes (breaking changes) in Visual Studio 2008 and Visual Studio 2010 so that I can warn the third party developer about the use of the objects that have changed.Of course it is even worse that what Mike said: If you expose STL in your DLL interface, you have to impose a lot of other requirements on the consumer of your DLL (or provide many copies of your DLL each built a different way). This includes
things like:
_HAS_ITERATOR_DEBUGGING
_SECURE_SCL
Debug versus Release
Static versus dynamic linking of the CRT
(Actually if the consumer is statically linking the CRT I don't know if you can make STL work at all unless you only use custom allocators as memory allocated by one instance of the CRT will be freed from the other instance of the CRT) -
Comprehensive list of apps optimized for iOS 8
Does anyone know of a site that is keeping a comprehensive list of apps that are optimized for iOS 8 up to date? Apple's only featuring some of them in the App Store.
I would like to keep an eye on these lists:
- Apps that use PhotoKit or have a photo editing extension
- Apps that offer third-party keyboards
- Apps written in Swift
- Apps optimized for Retina HD displays
- Or even just in general apps that take advantage of any iOS 8 technologies (notification center extensions, share extensions, etc)The first thing to try is resetting your iPad. HOld down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and then try again.
Then you can try to force close the apps, forcing them to reboot and maybe fixing the issue. Double tap the home button. Flick the preview for all the apps up and off the screen until all you have left is the home page preview. Tap on that then try to reopen your apps again.
The last thing to do is a restore. You back up your device, then erase all content and settings, then restore from the backup you just made. If you've backed everything up you won't lose any data but you give both the apps and the iOS a clean slate. -
Comprehensive list on enterprise vs. standard features
Is there any sort of comprehensive list comparing features of Oracle standard 9i vs enterprise.
It is easy to find the high level add ons like partitioning. However I know that at one time bitmap indexes were only in enterprise, is this still the case. Also query re-write, all materialized view functionality, com automation etc. It is very difficult to make the decisions without the ability to compare the functionality.
Thank youNo the Enterprise License is for a single server with up to
two(2) CPUs.
Four(4) CPU's on a single box requires two licenses.
Enterprise has the ability to create multiple instances of
ColdFusion
running on the same box. You could have seven instances on a
physical
each doing their own thing, if you had a beefy enough box.
There is a difference between Standard and Enterprise on
boxes with
virtualization as well, but I am not confidant enough in this
aspect to
offer a recommendation. -
Comprehensive list of ports used by Oracle
Does anyone know where I can find a comprehensive list of the ports used by all Oracle products?
Solved it, its in the Chapter 7 of the admin guide
-
Comprehensive List of Oracle/OCS Portlets
Hello,
I am looking for a comprehensive list of all prebuilt portlets available for Oracle portlet, particulary for OCS. I have seen it stated that there are 250-400 existing portlets, but haven't found them all listed in one place.
Thank you,
Guy GilstrapSee item #2 in http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14266/policies.htm#sthref951
-
List view - filter with parameters
Hi,
I need to define a list view to filter data with parameters.
I saw how to do it with the SPD in another post
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92271aa4-6582-4ea5-a10f-deaf02d2b62c/filtering-the-list-view-by-passing-date-parameters-using-sharepoint-desginer-2010?forum=sharepointcustomizationprevious
But need to do it in visual Studio (via definitins or Object Model).
How can I do that in Visual Studio?
Help is really appreciated.
Many thanks,
DDHi,
According to your description, you might want to create a list definition with the filter value from query string from URL. Then when you create a list instance with this list
definition, you will be able to filter the list view page by appending parameters to the URL in the address bar.
You can achieve this through modifying the Schema.xml file in the list definition project in Visual Studio like this:
How to create custom list definition
http://msdn.microsoft.com/en-us/library/office/gg276355(v=office.14).aspx
http://www.codeproject.com/Articles/412429/SharePoint-Create-List-Definition-and-Instanc
CAML Query Schema
http://msdn.microsoft.com/en-us/library/office/ms467521(v=office.15).aspx
Then we can filter the list with such an URL:
http://sp/Lists/List1/AllItems.aspx?Param1=2014-08-24&Param2=2014-08-28
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
Give me list of content conversion parameters in sap xi
Hello experts,
give me the list of file content conversion parameters (like <node>.fieldSeparator)
with their explination.
Thanks inadvance.
ArjunHi,
Did you checked help.sap....
Sender Side:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Receiver Side:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
also check these blogs
File Receiver with Content Conversion By Jeya Kumar
The specified item was not found. By Shabarish Vijayakumar
NAB the TAB (File Adapter) By Sukumarar
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1) By Venkat Donela
Content conversion in Sender file adapter-- 2 new useful parameters By Sukumar Natrajan
Thanks
SaNv... -
Is there a comprehensive list of compatible cameras to connect via firewire?
is there a comprehensive and up-to-date list of compatible cameras to connect via firewire that will work with FMLE?
I saw this -http://www.adobe.com/support/documentation/en/flashmediaencoder/FME_DeviceMatrix.pdf
but it's out of date and limited in scope... any more information?
thanks
JoshI'm in the process of trying to get this information for a client. Even with a paid AppleCare agreement, the only answer I'm getting is "look in the forums" and "look on the developer site" (although I have to give credit to the Tier-1 rep who's trying to help me.) The impression I'm getting is that they consider an exact list of header names to be proprietary information for some reason, and are going to great pains to try not to give out the information, but also to not create ill will amongst their customers by explicitly saying "that's proprietary".
-
Filtering sharepoint list data using report parameters
We are using xml to pull data from a custom sharepoint list into sql 2005. We have set a parameter that allows the user to filter the data by surname, however when the user tries to filter the list the drop down box brings up a list of every record, so there are duplicate entries for each surname.
Is there a way of filtering this so that there is only one instance of the users surname instead of it showing all the records?
Any help would be much appreciated.Hi,
Please see the below url
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/c43f25ab-aa3c-4586-85a1-1b89c3b21b12/how-to-filter-a-sharepoint-list-with-report-parameters?forum=sqlreportingservices
Solution is define here.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter -
List of all service parameters for Integrated ITS
Hi,
I am looking for the complete list of service parameters for Integrated ITS, with explanation about each of them. Ex: ~command, ~sap-user etc. I have tried searching in help.sap.com and in this forum and SDN blogs. I could find only some of them. I am not looking for anything particular right now. If I have the complete list it would help me to refer the list if I need any one in particular.
I would really appreciate if anybody can help me in this search.
Thanks & Regards,
Sudhakar.Hello Sudhakar,
The best location for ITS Parameter documentation is the online SAP Library at http://help.sap.com/saphelp_nw2004s/helpdata/en/54/4d9993c6592941a407313a6763575c/frameset.htm
Here under "Configuration" you will find a list of parameters for developers and administrators.
Edgar -
Creating List of Values for Parameters in Crystal Report
Dear All,
I have created a Report using Crystal Report XI and integrated that with VB Dot Net. It uses a Stored Procedure (SQL 2000) to retrieve data. The stored procedure has some parameters. When I run the VB dot net exe, it prompts for the parameters. However, I like to pass a List of Values to the Parameters, which the end user must select from the same.
How can I create a List of Values and attach to the Crystal Report.
Please help me in this regard,
Naren.Are you trying to set a bunch of default values (e.g.; 1st name, last name, address, order number, etc.), or an actual List of Values?
Also, remember to search the forums for possible solutions. When I enter "parameter" in the search box, I get over 7 pages of links...
The [notes|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true] database and [articles|https://www.sdn.sap.com/irj/sdn/businessobjects-articles] are great information resources also.
Oh, and confirm exact version of CR used.
Ludek
Maybe you are looking for
-
SOLVED: inaccurate JPG previews in Bridge
Just wanted to share my success story in case this helps somebody. I normally shoot RAW, and I convert to JPG with ACR and Photoshop. For a long time I've been aggravated that my JPG images often are incorrect in Bridge thumbnails or previews. While
-
Backward Compatibility of New Intel Processor Mac Mini
Will the data files and applications like Quicken 2006 on my old Power Processor Mac Mini transfer to the new Intel Processor Mac Mini? Mac mini Mac OS X (10.3.9)
-
Limit member selection based on access in running Hyperion Financial Report
Hi there I am wondering, is it possible to limit the member selection in a prompt box based on what access they have when running a Hyperion Financial Report? I know its possible to limit the user POV based on the members they have access to (in Pref
-
The Error message: Runtime Error! Microsoft Visual C Runtime Library C:\Program Files(x86)\iTunes\iTuneshelper.exe R6034 An application has made an attempt to load the C runtime library incorrectly I unistall iTunes new version instead of update, a
-
Entity validation behavior in multi-step process
I'm using jdev 11g with ADF BC and I want to create a multi-step process with a train to split a long form into multiple views. The fields on the form are based on a entity object that was created from a database table. Most of the fields are mandato