Compress the requests without opening PRD client

Hello experts,
Everytime we take INIT loads into 0IC_C03, we have to compress the BX,BF & UM requests. But it is only possible after opening the PRD client.
Can anyone guide how to compress these requests without opening client? Is there any special auth. required for this?
Please reply.
All answers will be rewarded.
Regards,
Roy.

Roy,
When you open the client and compress - are you asked for any request.
What I think is happening is that there might be some tables which have entries being deleted and recreated. For deleting the entry you will have to open the client if the table is not maintainable.
As a process if no request is triggered then it is a table issue - check if you can set any namespace to modifiable and resolve this or if you are getting a request then you will have to open the client.
Arun

Similar Messages

Office 365 Streaming Notifications, "One or more subscriptions in the request reside on another Client Access server."

Hello all,
I am maintaining a part of our product that requires monitoring mailboxes for events. This is currently being done by using streaming connections for getting the notifications. Our solution has been successful for situations with smaller numbers
of mailboxes, ~200 or less. However we are seeing some issues when scaling up to say, 5000 mailboxes.
The error and the sequence leading up to it are as follows:
Make an Exchange Service Account.
exchSvc.ConnectionGroupName = someGroupName;
add to the httpheaders ("X-AnchorMailbox", userSmtp) and ("X-PreferServerAffinity", "true");
create a new impersonated UserId for the userSmtp address that is our anchor mailbox.
set the Exchange Service account ImpersonatedUserID to the one we just made.
ExchangeServiceAccount.SubscribeToStreamingNotifications(new FolderId[] { WellKnownFolderName.Inbox }, _mailEvents);
to this point everything was successful, saw no error messages.
we create a second impersonated UserID for a different mailbox, and repeat the process above from that step forward. Upon the final step, subscribing to the streaming notifications we get the error:
Exception: Microsoft.Exchange.WebServices.Data.ServiceResponseException: One or more subscriptions in the request reside on another Client Access server. GetStreamingEvents won't proxy in the event of a batch request.
This is only the second subscription that we are trying to add to this connection, and it is to a different mailbox than the first.
Can anyone please help point me to where this is going wrong?

>> Is there a good way to verify the number of subscriptions in a group?
Not that I know of you should be tracking this in your code there are no server side operations in EWS to even tell you if there are active subscriptions on a mailbox.
>>The error I am getting is on the second subscription in a new group, just after doing the anchor mailbox so I don't think we are hitting the 200 limit.
It's hard to say without seeing your code but it sounds like there is problem with your grouping code. One way to validate this is that with every request you make with the EWS managed API there is a
RequestId header http://blogs.msdn.com/b/exchangedev/archive/2012/06/18/exchange-web-services-managed-api-1-2-1-now-released.aspx
you should be able to give that RequestId to the Office365 support people and they should be able to check the EWS Log on the server and tell you more about what's happening (it maybe server side bug). Something doesn't quite add up in that the X-BackEndOverrideCookie
is what ultimately determines what server the request ends up at and the error is essentially telling you its ending up at the wrong server (have you looked at the headers on the error message?). Is it always one group of users that fails have
you tried different groups and different combinations etc.
Cheers
Glen

EWS - Office 365 - "One or more subscriptions in the request reside on another Client Access server. GetStreamingEvents won't proxy in the event of a batch request."

Hello
My goal is to subscribe for streaming notifications for multiple users in the same time.
One way to do that is to create multiple StreamingSubscriptionConnections each one should contain one StreamingSubscription for each user. The problem with this method is that in Office 365 the maximum
number of connections opened is 20.
Another method to solve this problem is by creating one StreamingSubscriptionConnection and then all StreamingSubscriptions for each user to the connection. This method solves the maximum number of connections
problem and it works fine with exchange onPrimises. But when trying it with Office 365 it will result with the SubscriptionError:
"One or more subscriptions in the request reside on another Client Access server. GetStreamingEvents won't proxy in the event of a batch request."
Can anyone help me here ?

With Office365 you need to Group your subscriptions and set the Affinityheaders see
http://msdn.microsoft.com/en-us/library/office/dn458789(v=exchg.150).aspx and
http://blogs.msdn.com/b/mstehle/archive/2013/07/17/more-affinity-considerations-for-exchange-online-and-exchange-2013.aspx . Take note of the restrictions on the Group and other throttling restrictions if your using only one service account.
Cheers
Glen

Compress the Request with Zero Elimination

I delta load the transaction data into Infocube by InfoPackage and compress the Request ID manually without select 'with Zero Elimination'. Now I wanna Compress the request ID with Zero Elimination again. Could you give me some hits on that. Many Thanks .

hi,
There're two programs that work for me.
1. RSCDS_MERGE_DUPL_REF_POINTS - this is to actually compress the records.
2. RSCDS_NULLELIM : - To remove the records with 0 value i.e. null Elimination
Although, SAP doesn't recommend using them if your compression is working fine.
You may want to try them in your non-production system first.
-RMP

How to compress the requests selectively

Hi Gurus,
i have 4 requests , i would like to compress the 2dn one
if i compress 2nd request 00 to 2 request will be compressed, but i don't want like that i want compress the
2nd requet only not from 00 to 2
how can i do that ,
thanks
Anil

hi Shreya,
The latest requests are related to Inverty management i
i.e BF(goods movements) and UM(Stock revalution)
i have to compress these(BFandUM) without marker update
if i compress the requests, it will compress 00 to the latest request,
this nomarker update will effect the older request, why because they are not compressed yet.
wat i have to doo,
Anil

Is there any way to power up the MacBook without opening the lid?

Does anybody know if there are key combinations (external keyboard) or a way to enable the Apple Remote to power up a MacBook?
I have an external display, keyboard, and mouse connected and would like to be able to startup the MacBook without opening the lid...
Any help is appreciated. Thanks!

Macs have not been able to startup from a USB keyboard for nearly eight years. The very first iMacs had a USB keyboard with a power button, but since this is not a standard USB function, Apple removed this ability shortly after.
As the others have mentioned, if you have an external display, keyboard and mouse, then you can wake the MacBook from sleep. Is there a reason you're shutting down at all? I haven't restarted my MacBook twice since I've had it for the last three weeks. I just close it and it sleeps when I go to work or at night.
-Doug

I got a macbook pro with serial number C1*****V30 but i want the full details of the laptop without opening it. how?

i got a macbook pro with serial number C1*****V30 but i want the full details of the laptop without opening it. how?
<edited by host>

Also in the future please do not post your serial number in the forum. See this tip on identifying Macs in the future: https://discussions.apple.com/docs/DOC-6413

Unable to Compress the request of a Cube

Hi All,
I was trying to compress the cube data,At one request I got stuck. When ever I try to compress that request manually, but it is unable to compress the request and sends the following job logs
Job started
Step 001 started (program RSCOMP1, variant &0000000000190, user ID XXXXXX0006)
Performing check and potential update for status control table
No requests needing to be aggregated have been found in InfoCube 0XX_X01
Compression not necessary; no requests found for compressing
Compression not necessary; no requests found for compressing
Job finished
After further analysis, I observed the request which I am compressing , has an selective deletion.Since its is 2year old data I would like to compress the data,please suggest is it possible to compress,If the request has selective deletion.
please suggest.
Thanks & Regards,
Abdul

Hi Abdul,
Check that, if the cube that is being compressed feeds the data to a different InfoProvider, if yes then complete that laod first and then do the compression. this might be the reason sometimes. if the cube is not feeding anything currently try compressing the request again.
In some cases ,when the compression is manually performed (in the tab collapse of the cube) no compression would be done. In those cases you can try creating a process chain with only the compression step. This often solves the problem.
If both the above process don't solve your problem,
Try the SAP note :407230 (such problems occure after installing SP15.)
Regards,
Sudheer.

Importing bookmarks from IE only brought in half of them (A - M) How do I bring in the rest without opening IE?

Importing bookmarks from IE only brought in half of them (A - M) How do I bring in the rest without opening IE?

I've called the big guys to help you. Good luck.

When do we compress the request in cube. ?

Hello all,
We have been live for a few months now. After how many days/weeks/months should we compress the request in cube. ?How often do we have to compress the data in the cube.
I know once compress than we cannot delete the data by request but we there is an issue and we need to delete data completely from the cube that is possible right ?
Thanks in advance

How often Compression needs to be done depends on the volume of data that is loaded everyday. Unless the volume of records loaded everyday is unusually high, doing compression once a week might be good enough.
Also you are right abt losing the ability to delete by request in the infocube after compressing the request. But we dont necessarily have to delete the whole cube incase of issues. There is always the option of doing 'SELECTIVE DELETION'.
Next, when doing the compression you have an option of mentioning the date range. Choose the option of compressing requests that are older than 4 days (arbitrary) to have a buffer for deleting the request incase of issues.
Hope this helps!

Is it possible that i can view important dates of the calendar without opening the calendar.?

how can i view the birthdays in the calendar without opening the calendar..is there any way i get a notification or anything..??

iOS5 has the option to pull down a screen where all notifications are listed, including the upcoming events (Notification Center) . Apple - iOS 5 - See new features included in iOS 5.

Differences in compressing the requests.

Hi experts,
What is the difference between compressing the request with:
No marker update ( Checked ).
No marker update ( Not checked )
Zero elimination.
And also if we fill the setup tables through mcnb ( Initialization of stock ). What exactly it mean ? ( Is it the stock which is there at the time we fill the setup tables ? ).
And also suppose if we filled the setup tables of 2lis_03_bx through mcnb today and through oli1bw we need to the fill the historical data of 2lis_03_bf .
Here what should be the date range.Is it upto yesterday? ( Bcz we have filled setup tables of bx though mcnb today ).
Please explain me in simple words.Full points will be assigned.
Regards,
Bhadri M.

Hi
Stocks are calculated using the stock marker and appliying the movements types and quantities to that marker.
If you compress cube with no marker update checked, movements compressed doesn't update the stock marker and are viewed as historic data, then after initialization the mark must be uncheckd in order to update the stock marker.
To be more precise and simple marker update Updates the stock values and NO Marker does not.
Generally BX upload has to be compressed with marker update and BF(and UM) delta init has to be compressed with NO Marker because Stock was updated with BX. And delta loads of BF and UM has to be compressed with marker update because these brings new Material movements which will has to give effect to stock.
Sorry for edition but was unable to post
Zero Elimination Explaination
Compression is nothing but moving the data from F fact table to E fact table by losing its request numbers.
For cumulative key figures(compression)
Here we have a option called zero elimination (it is applicable only for cumulative key figures). If you want to avoid the Info Cube containing entries whose key figures are zero values (in reverse posting for example) you can run a zero-elimination at the same time as the compression. In this case, the entries where all key figures are equal to 0 are deleted from the fact table.
This is permitted only for Info Cubes , where key figures with the aggregation behavior SUM appear exclusively. In particular, you are not permitted to run zero-elimination with non-cumulative values.
Thanks
Edited by: Noor Ahmed khan on Jul 30, 2008 6:55 PM
Edited by: Noor Ahmed khan on Jul 30, 2008 6:59 PM

Compress the request of inventory cube 0ic_c03

Hi experts,
I want to compress the infocube 0ic_c03 daily for the delta requests through process chains.
In the process chain, process types there are 2 options:
1.Collapse only those requests that were loaded XXX days ago
2.Number of requests that you do not want to collapse
Which one i should select and how many days i need to go.
I want to the daily delta request to be compressed.
Pls guide me accordingly.
Regards,
Nishuv.

Hi,
Inventory data is non-cumulative data and we usually keep 30 days. Once compressed we cannot make any changes if there are any errors on particular day. We had problem when FICO consultants changed valuation in the systems directly and we were not aware of that. Later when values in the FICO is different in Inventory then we figured out that there were some manual changes in FICO. Luckly we didn't compress those requests. Later thru some routines we fixed the issue.
Thanks
Srikanth

Publishing VI's on the Internet without open front panels

I'm using LabVIEW 6.02 and are publishing VI's on the Internet. I'm wondering if it is possible to publish VI's without having the front panels open when you are running the program?Or do they have to be open to be in memory and to be able to get updated front panels?
(I use the .snap command so it is possible to refresh and get updated VI panels.)
I also wondering if the only difference between .snap and .monitor command is that you can use the refresh command with monitor so the labVIEW display will automatic updated itself. This is not possible with the .snap command?
Thanksregards Anne

I've never tried to exactly what you are talking about but a similar issue comes up when printing. A front panel normally won't update unless it's open. The way to insure that it does is to have at least one property node on the routine's block diagram. When LV sees the property node, it goes ahead and updates the front panel even when it's closed.
Hope this helps...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Is it possible to open/modify a psd through the sdk without opening photoshop?

I am just starting to study the sdk, but all the examples I have seen are reading psd documents like this (example in C#):
var app = new Photoshop.Application();
var documents = app.Documents;
I don't need to create the Application object, in fact I don't want to call it because it returns the currently running instance of Photoshop and my application has to run stand-alone, independently from Photoshop.
Is there a possibility to read the document directly, something similar to this?:
var document = Photoshop.Document.Open(path);
I imagine that this can be done the hard way if I look at the psd format specification, but is there a way to do it with the sdk?
A bit of context:
I would like to create a stand-alone application that uses the functionality from the sdk to change a psd file, but this application should be completely separate from the currently running instance of photoshop.
This application is intended to be running in the background, while the artist is working on something else, and preferably it should not affect him in any way.

Hello
As far as I know this is not possible, and might also be against the license terms of Adobe. My logical thinking says that in order to do that you would have to have two instances of the Photoshop engine running. One will give the services to the plugin and the other will stay with the artist. However, I dont know if this is possible.
What Im pretty sure of is that there is no way to run the SDK without having Photoshop installed, but this is not what you are looking after, is it?
Does your application need any communication with Photoshop itself?

Compress the requests without opening PRD client

Similar Messages

Maybe you are looking for