Compress to Stream in 1440 X 1080

I have a .mov in 1440 X 1080 and I'd like to compress it to stream well over high speed internet connections. I'm brand new to compressor & video work and I've been trying the presets available. When I use the streaming presets it does not retain the correct aspect ratio.
Does anyone have any suggestions for preserving audio & video in the original aspect when compressing for streaming?
Thanks

stevetothink,
I'm not an expert at this but may be able to give you a starting point. I compress from 1920x1080 down to 480x270 for streaming and it looks pretty good.
To do this you will have to add a setting (plus sign under Settings tab) in Compressor. From the pull-down menu, select Quicktime movie. You should see the Inspector window. Give your setting a name and description.
Under the Encoder tab, chose file format Quicktime Move; extension .mov;
Click on Video-Settings, and chooose compressor type: H.264; Motion frame rate 29.97fps; Key frames every 20 frames (reordering checked); Compressor Quality Medium; Encoding Best quality; Data Rate restricted to 800kbits/sec; click ok
Under the Filters tab, I check the deinterlace box because we shoot 1080i
Under the Geometry tab/Dimensions, Frame Size is 480x270 Custom (16:9)
Save it all.
You will have to experiment with different settings. Make sure you have a short (10 second) clip that you can work with.
Hope it helps.
kr

Similar Messages

Best Compression for 1440 x 1080 HDV

I have a short film, around 13 minutes long, which I've recently completed. It was filmed in 1440 x 1080 24fps in HDV. What compressed video format would produce the highest quality "lossless" compression of the film? I'm planning on using the video file as my highest quality master copy –besides the FCP file itself. Thanks.
Message was edited by: Hadjimurad

It all depends on many things, including the running time. (Which camera did you use, I am assuming it is 24P?) Also I am guessing you want to put this on DVD?
Generally you will need to calculate the rates you can encode to make the video fit
[Rate Calculations|http://dvdstepbystep.com/faqs_7.php]
Keeping mind issues of how rates can affect the DVD
[How Rates Affect Playback|http://dvdstepbystep.com/faqs_7.php]
Not sure if you are targeting SD (PAL or NTSC) but the video needs to be encoded to m2v which is a compressed Codec (HDV is also).
Compressor (the newest version) and bitVice both do good jobs in creating m2vs off of HDV. In Compressor the frame controls willl help produce better results though it can take longer to encode.
Here is a good thread discussing 24FPS and what is happening
[24P Issues |http://discussions.apple.com/thread.jspa?messageID=3943775&#3943775]
I would probably export the movie as self-contained to start (not sure if there are alot of color corrections etc that need to be conformed and that can take time) and run that through the encoders, tweaking the settings.
[HD to SD Threads |http://discussions.apple.com/search.jspa?threadID=&q=HD+SD&objID=f952&dateRang e=last90days&userID=&numResults=15&rankBy=10001]

What is the best compression format for 1440 x 1080 24fps HDV?

I have a short film, around 13 minutes long, which I've recently completed. It was filmed in 1440 x 1080 24fps in HDV. What compressed video format would produce the highest quality "lossless" compression of the film? I'm planning on using the video file as my highest quality master copy –besides the FCP file itself. Thanks.

Your master should be exported as QT movie (not compression) keeping same settings and self-contained checked (No loss of quality is involved, the result is a perfect copy of each frame from your original media).
Any other conversion will involve compression then potential loss of quality.
That master will play fine on your machine but don't expect it to play on PCs.
However, you can send it to tape or take the exported self-contained file to a post house for DigiBeta or other transfer if you need screening copies of your video.
For the web H.264 is a great choice, amazing quality and fairly small file size with proper settings.
G.

Why does export with "current settings" compress 1440 x 1080 to 720 x 480?

I am trying to export some clips from fcp x to motion (wish you didn't have to do this, to begin with). Anyway, my clips are being exported in a lower quality )720 x 480)-- all of the choices in the "export" drop-down menu are 720 x 480, even though the clip is 1440 x 1080, imported to dfcp from hdv format.
Thanks for the help; this is driving me nuts.

Ah, well it says 1440 x 1080 in the project that I am editing, but since I wanted to only fix a short clip, I created a "to fix" project and put the files I want to fix in there to export. That project had defaulted to 720 x 480--there's the problem. Thanks, yet another.

Does iMovie'08 import 1920 x 1080 at 1440 x 1080

After some thought the subject (Sony HDR SR11 resolution) of my last post yesterday may include all HD camcorders with 1920 x 1080 resolution. when iMovie'08 imports the files they are saved as quicktime movies. When played in quicktime and the details looked at in Movie Inspector (quicktime/window/show movie inspector) the format is shown as Apple Intermediate Codec 1440 x 1080,
Does iMovie'08 import 1920 x 1080 at 1440 x 1080 and then output it at 1920 x 1080 ?

Hi(Bonjour)!
Look at this very interesting link about H.264 CODEC and web compression:
http://www.kenstone.net/fcphomepage/qt_h-264_moviesfcp.html
As WEB involves many compression and smaller frame sizes, the quality will be on par for both formats.
iDVD will accept HD sequences movies from FCE but it will convert them to standard definition as it cannot output (authoring and burning) high def blu-ray DVD.
Look at this link (altough you don't have ProRes codec with FCE package...) about HDV limitation for DVD usage:
http://www.kenstone.net/fcphomepage/hdv_timeline_to_sddvd.html
Michel Boissonneault

How to make compressor give me 1280x720 h.264 from my 1440 x 1080 sequenc

can someone please tell me how to make compressor give me 1280x720 h.264 from my 1440 x 1080 sequence, with compressor I load up my high defition h.264 but i cant see where i can chage the size, I can tab on the preset and change max bit rates and other stuff but not to make it 1280 x 720,
Thanks for the help,
Daz

In Compressor 3's Settings window:
Apple > Apple Devices > H.264 for Apple TV
this is one of the presets that is supplied as standard and it is pre-configured for H.264 1280x720 output
if you're building your preset from scratch then you can set the output frame size in the Dimensions area of the Geometry pane

How to edit 1440 x 1080 with SQUARE PIXELS?

Yes, I know it's weird. I would like to edit 1440 x 1080 with square pixels - HD with a standard aspect ratio. Unfortunately, any preset in 1440 x 1080 (HDV for example) is anamorphic and won't let me change it to square pixels. How do I create a project in 1440 x 1080 with square pixels?
I know I can alter the aspect ratio on export, but that would squish the images, so that won't do. I need to maintain square pixels from start to finish.

Ah, but it is not coming from a camera. I am creating it from images. In fact the main purpose of creating this video is
so the projectionist can adjust zoom and focus to bring the projector back to optimal "standard" settings while the audience has something funny to watch. Sure, I could create it in DV 4:3 format, but my images are already sized for 1080 height (I made a similar video for adjusting the zoom/focus for widescreen, which is really 4:3 with the top and bottom offscreen since the projector doesn't do 16:9). It is an older projector before HD standards and 16:9, but is higher resolution than the typical 4:3 formats. Another reason I want to use higher resolution is because I previously made the video at 720 x 480 resolution and it looks much better in HD.
So the question remains - how do I set custom resolution with square pixels?

Changing HD 1440 X 1080 video into NTSC

Hi,
I took most of my video in HD 1440 X 1080 and am finding it too slow to render. I want to complete my project soon. Is it possible to easily change the 1440 X 1080 video int NTSC so that the project won't take so long?
Thanks,
Andy

what Tom is telling you:
your source is HDV/29.97fps.
set your FCE project to that format.
if the project or squence is set correctly, no rendering, no hickups..
when the sequence has any other setting, FCE renders everytime you change/edit anything..
why would you downscale to NTSC?.. you lose tons of quality..

HD 1440 X 1080 in iDVD can?

Hello! I need help please; I have proyect, a clip (of 20 minutes) but it is
filmed and made in HD 1440 xs 1080. It is not in PAL
I want to view it in my TV (my TV is normally in PAL not blue ray) I have to pass the film HD 1440 X 1080 --> in iDVD and in iDVD can be in HD 1440 X 1080 or I have to pass in the format PAL 720 x 576?
thousand thanks!

AIC will not work in FCP 4.5...nor will HDV. Period...end of sentence. That version is too old, those formats came out AFTER FCP 4.5 was made. The only option is to convert the footage into a format that FCP 4.5 works with, and the only options for FCP 4.5 are DVCPRO HD and uncompressed HD. DVCPRO HD is the better option. HOWEVER, 1080i DVCPRO isn't 1440x1080, it is 1280x1080...so you will be losing some lines of resolution.
Time to upgrade if you want to work with current formats.
Shane

1440 x 1080 in 4.5

Is there any way to work with 1440 x 1080 footage into FCP 4.5 ?

AIC will not work in FCP 4.5...nor will HDV. Period...end of sentence. That version is too old, those formats came out AFTER FCP 4.5 was made. The only option is to convert the footage into a format that FCP 4.5 works with, and the only options for FCP 4.5 are DVCPRO HD and uncompressed HD. DVCPRO HD is the better option. HOWEVER, 1080i DVCPRO isn't 1440x1080, it is 1280x1080...so you will be losing some lines of resolution.
Time to upgrade if you want to work with current formats.
Shane

HDV 1440 x 1080 on timeline to dvd compliant MPEG-2?

Gents, I need your help, suggestions and advice once more.
About 2 months ago, I belatedly and finally entered the HDV world by purchasing a Canon XH-A1s which all in all I’m very pleased with. Due to time constraints, limited processing resources and the complexity of the project involved, it was only earlier this month that I submitted an HDV program to be aired on local access cable.
Well, it turns out that I was under the false impression that their fairly new server that feeds their broadcast system could handle MPEG-2 files with HDV content! Instead, it’s very picky & not the case. Their head tech guru wrote me an e-mail stating that all they got was a black screen (which is embarrassing to all concerned) and that from now on I either submit a NTSC dvd spec 720 by 480 file or my program is off the air.
My Premier Pro project (only v3.2) concerned (currently on the timeline) is 1440 by 1080 shot in 60i with an FPS of 29.97. So now I’m required to downgrade it to SD & do my best to ensure that quality doesn’t take a tremendous hit. The mission is to take this project direct from the timeline (it’s finalized + fully edited) and make an MPEG-2 dvd spec file. Bottom-line, how is this best achieved & by what process/methodology or workflow?
My twin goals are to:
a) Preserve the aspect ratio since I take very tight shots, so a crop and resize probably would do more harm than good. What kind of an option is SD 16:9 over 4:3? What are the pros & cons of each? I don’t want to unintentionally crop off part of a body part for example.
b) To the extent possible, maintain image/footage quality so that it remains watchable. I’m looking for a workflow that will retain quality within reason.
What approach and solution would you take if you were in my shoes?
Am sure others have traveled this route before and would appreciate all input and pointers to mull over and try to apply them not only to this project, but those in the future as well.
Thanks so much.

Tutorial HD to SD w/CS4
http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html

.mp3 compressed audio stream dose not play in AIR

Hi All,
We are trying to load stream audio file with mp3 compression in the AIR app using the follwoing code using FLash CS4 -
var snd:Sound = new Sound();
snd.load(new URLRequest(""http://67.159.30.133""));
snd.play();
This works fine when we publish for flashPlayer 9/10. When we try to publish it using AIR the sound dose not play.
We have tested with another approach, where we are loading sound with .flv compression. Here we are using NetConnection and NetStream method to play the sound. With .flv compression it works well in both flash player version as well AIR versions. On the other side when we try to use NetConnection and NetStream method to play .mp3 compressed audio stream it dose not pl when we publish in AIR or flashplayer.
If anyone having any info to play .mp3 compressed format in AIR file will be very much appreciable.
Regards,
Kaushik
[email protected]

While waiting for replies (I don't use xdcam) go to Google and enter
site:forums.adobe.com xdcam
to read other xdcam discussions... one may help

Importing still images 1440 x 1080 not filling frame (PRE9)

My preferences are set to 1440 x 1080 but when I bring in jpgs resampled to this size (at 72dpi) they're not filling the frame view. I know there must be a simple explanation . . . but I'm simple. Enlightenment welcomed.

Me too. What happens if you right-click on the still photo on your timeline and uncheck Scale to Frame Size?
(Better yet, go to Edit/Preferences and turn off Scale to Frame Size permanently. It gets in the way of a lot of work.)
Meantime, if that doesn't work, you can always just click on the picture in the Monitor panel and drag on its corner handles to stretch it to fit the frame.

How do I set up Premiere as ProRes 422 at 1440 x 1080?

Hello.
I am still on the learning curve for Premiere Pro having held out on FCP 7 for as long as possible.
Anyway.
I need to edit a project that was shot on HDV.
It was originally captured as ProRes 422 in FCP at 1440x 1080. I am now importing the video files into Premiere.
I want to continue to edit in ProRes 422 at 1440 x 1080.
I have the ProRes 422 codec installed for Premiere but I can't figure out how to change it from its default of 1920 x1080. When I change the 1920 to 1440 it changes the 1080 to 810.
I might be doing this in the wrong place. I am attempting to change it in the sequence settings under video previews. I can't seem to find anywhere else to change it.
Can someone please advise?
Many thanks.

Open a matching Sequence by dropping the clip on the "NEW ITEM" Icon at bottom of the Project Panel.

Why FCE4 change LiveType to 1440 x 1080 ?

Hi there,
I import in some effects I created in LiveType.
In LiveType under the Preference, I clearly select Apple 1080i50 ... but when I goto FCE4 & import in the LiveType .ipr file, the properties showed it as 1440 x 1080.
Does that mean the rest of my sequence & clips in Timeline (which was recorded in 1920 x 1080) will be downgraded to 1440 x 1080 when I render the whole sequence ?
Another thing, that is puzzling me, when I open up the same LiveType project file & see the project properties, it has changed to HDV 1440 x 1080 despite me changing & saving earlier to Apple 1080i50
Any ideas ?
Thanks

Tom Wolsky wrote:
What are the exact item properties of your FCE sequence?
There is no Apple 1080i50 preset in LiveType. There are HDTV presets and there are two sets of HDV presets, one for the Apple Intermediate Codec. If your FCE sequence is HDV you use the 1440x1080 HDV Apple Intermediate Codec 1080i50 preset. If it's 1920x1080 you use the HDTV 1080i50 preset.
Okay thanks Tom, now I understand.
I used to think that Apple 1080i50 is 1920 x 1080.
Btw, my sequence in FCE is 1920 x 1080. So, if I understand you correctly, in LiveType, I should use HDTV 1080i 16:9
However, if my sequence is 1440 x 1080, in LiveType, I should use HDV-Apple Intermediate Codec 1080i50
My earlier mistake when I said I used Apple 1080i50, I meant I used HDV-Apple Intermediate Codec 1080i50 in LiveType thinking it is 1920 x 1080. Now I know this is 1440 x 1080, that is why in the browser, the ipr file from LiveType is indicated as 14440 x 1080.
What I should select in the LiveType preset should be HDTV 1080i 16:9. This is to match my FCE sequence of 1920 x 1080.
Is the above correct ?
Thanks

Compress to Stream in 1440 X 1080

Similar Messages

Maybe you are looking for