Compressed request not visible

Hi experts,
I have a infocube with two request (1000 records and 90 records). The request with 1000 records is compressed. When I go to view contents of the InfoCube, I see records for only request with 20 records.
How can I see contents of both request.

Hi,
how do you view the content (the fact table or the infocube content)?
via the fact table it may only show the F fact table data (non compressed), compressed will be in the E fact.....
via the infocube content (or transaction LISTCUBE), it should show all your data if you don't specify any selection criteria...
Check that your request has the status "ready for reporting" in the request tab of the cube...
check if the compression job ended successfully...
let us know...
Olivier.
Message was edited by:
Olivier Cora

Similar Messages

Request not visible in the version management of a Report Program

Hi,
We Imported an external request into the SAP System.
The request was imported successfully and a program already existing is updated with that request,
The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that particular program
We tried reimporting the request but the request is not visible.
Regards

Check the transport logs and see if there are any erros/warnings.

Role Approval request not visible in Role Approvers ToDo tab

Hi IDM Experts,
We have implemented IDM 7.2 SP8 in our project. We have performed the basic configuration for Identity center and IDM UI. The initial load from CRM is also completed successfully.
We followed the steps in guide https://scn.sap.com/docs/DOC-26322 to configure workflow such that in case role is requested to be assigned to user, the request goes to role approver(in his todo tab) for approval. The access will then be provisioned into backend CRM system on successfully
approval. However, we are facing an issue where the Role approver does not get anything in "TODO" tab for approval. The request shows in "Pending" status and logs show that tthe request is pending approval, however, it never appears in role approvers queue.
Kindly help on the issue. Please provide below information:
1) We can check in logs that the request is pending approval. Is there any way we can check where is the request routed to and whoose approval is pending here if it did not goto "Role Approver" for approval.
2) Any trouble shooting mechanism/tool available in IDM to debug issues like this.
Thanks in advance for your help.
Thanks and regards,
Nitin

Hi Nitin,
How do you assign the role to the user? if it's trought IDM UI, you loggin with which user?
There is a limitation on approval with SP08 : the requestor of the assignement can not be define as an approver.... but in this case the approval is automaticaly rejected by the system ...
in which logs / table can you see that your request is "pending for approval" ?
I also would recomand you to use the simple scenario "get approver from role/privs" of as krishna mentioned. (unless you need to do more custum actions)
Besides, you can check approval entries and status in DB views :MXWV_ApprovalQueue ...
Fadoua

Request not visible in the production import queue

Hi all.
When importing some requests in the QUA system, these requests do not automatically appear in the PRD import queue: they need to be added manually.
This only happens for some request: there are requests which automatically appear in the import queue of the production system.
There is no approval queue used.
I'm looking for the cause of this behaviour, but without success until now.
Can anybody help?
Thanks a lot,
Dino

Hello Dino,
This might happen when the request is originated from a system which is not inside the same transport domain of the target system (QA/PRD).
So if you've DEV > QAS > PRD landscape and you've somehow imported a transport ABCK9xxxx of system ABC into the DEV, then qas then prd, it won't appear automatically in the next target queue, but you've to manually add it.
Regards,
Debasis.

Paid Down Payment Request from 2007 not visible in 8.8

Hello experts:
I recently upgraded a customer from 2007 to 8.8, and an existing fully paid down payment request is now not visible anymore in the "incoming payment" window due to some of the changes in 8.8. But I also cannot reconcile the transaction because paid down payment requests cannot be reconciled.
I tried to cancel the incoming payment in order to apply it differently, but that also fails with a strange error message ("Cannot cancel payment: One of the credit notes has been deleted. [3524-6]").
I could create a JE to transfer the balance from the liabilities account to the asset account within the BP, then reconcile the two transactions in the asset account, and effectively having zero balance in the liabilities account, but I'd like to reconcile the two transactions in the liabilities account as well, so that they're really closed.
Any ideas?
Thanks in advance.
Joerg.

Thanks for your reply Jitin.
My issue is related to A/R, so the mentioned query doesn't turn up any results. However, a few minutes ago, the same issue appeared in A/P, so I tried the query again, with no luck.
I will proceed to log a support message and post back with the solution.
Thanks,
Joerg.

Data mart is not visible in Compression cube

Hi Experts,
we r loading data daily into BI inventory Cube 0IC_C03 with compression, but when i loading the same data into SEM server there wont get init flag, even i checked datamart status in BI but i did not find.
so please help me out why it is not finding datamart symbol in BI & Init flag for same data into SEM.
i think this might be with compression cube...pl give me complete solution...
Thanks
Pinky....

hello,
Try doing a couple of checks:
observe the values for Fields BWGEO, BWGEOO, BWGVP, BWGVO, BWNETWR, BWMNG, etc in PSA if they are null or not.
If not null, That means have you actvated The process key (0PROCESSKEY and 0BWAPPLNM) else activate the same.Take a look on note, 353042.
When loading to another target,do a full update, followed by init wo data transfer, followed by delta
OR
regular init followed by delta
or
First do a init W\O Data transfer and then
Second do a repair Full Load, this will Load all the data which is present at that instant in 0IC_C03.
and hence further u run Delta Load, this will bring delta Load.
Don't do any compression before the delta because you will not get any delta records afterwards. The compression combines all of the non-compressed requests, so you will lose data in unloaded deltas.
When you r compressing, set with No Marker update Update NOT SET i.e. unticked or unchecked after loading of 2LIS_03_BX.
Regards,
Dhanya

Approve Button not visible in Tasks for Leave request in Tasks- MSS

Dear gurus,
Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
Any suggestions....
regards,
Rajasekar.

hello Bala,
there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
Thanks alot Bala..
In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
Regards,
Raj

(Harmful) edit not visible in WkiHistory in "Feature Requests"

Maybe this should be a discussion.
I've just removed a porn link from the Forums table in "Feature Requests for..."
The disturbing part is that the edit I removed first appeared in Rev.233, but was not visible in the WikiHistory. I can construct a lot of scenarios here (but I won't!) and all of them are scary. I cannot construct a scenario with a "harmless"
rating.
I'm only a newbie, it's not for me to take this further. But I am sufficiently experienced to know that a revision of best practise access control should be undertaken. Yesterday would be a good time to initiate it.
Gordon.

Hi Richard -
Thanks for answering. It's the comment to the edit that's missing.
I believe (I have not tested) that blank comments are not listed as part of the edit, so all we get is the user's edit listing, but no clue of what was done in the edit.
I draw your attention to Wikipedia, where all parts of the edit are summarized in the History List. I don't believe the Technet Wiki History needs that amount of data, but OTOH that is the sort of thing computers excel at. But I do believe Technet
Wiki should record blank comments as well as filled comments. Maybe a blank comment could be filled with the first 10 or 20 words of the edit?
Gordon.
Okay, please add the feature request to the Wiki section:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools.aspx#TechNet_Wiki
Hey, thanks for your edits here:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools/compare.aspx?revB=0&revA=234
You removed a dead link and a spam link!
And the history tab showed me all that!
We're actually thinking of migrating to the Wikimedia platform. Then that would give us your feature request. But it's best to capture it on our list so we don't lose sight of it.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Change request released & but not visible

Hi kaushal & all,
Customizing change request is released from development system & data file & co-files are not generated which inturn i can't manage to
see the request in queue.Also log is not visible for the released request.

Hi,
Customizing change request is released from development system & data file & co-files are not generated
For the above reason only two possibilities if STMS configuration is proper.
- Request is local request
- No target system is define in released request.
in your development system run se01 -> in display tab enter request -> press enter.
double click on request -> select properties tab -> make sure target system indicate your QAS system.
regards,
kaushal

Request Type not Visible in CUP

Hi,
We are in the process of configuring CUP.
We have uploaded file AE_init_append_data _CC.xml into the initial system data of CUP. But Request types MITICRLC etc are not visible in CUP.
Workflows for RAR are visible in CUP-> CONFIGURATION->MISCELLANEOUS
Any clues.
Regards,

Please check if you have activated the RAR workflows in CUP-> CONFIGURATION->MISCELLANEOUS along with proper exit URIs and User ID password details.
Once these workflows are activated only then you will be able to see the corresponding details under request type, priorities etc for RAR workflows.

Request id not visible in Manage

Hi BW Experts,
Has anyone experienced having a Request id of data in an Infocube, which was not visible via the "Manage"? If so, how do ensure this doesn't happen?
The data was "deleted", but when doing Listcube the data is still showing. There was a database error of 913 during the deletion of the data, but there was not an error raised in the sm37 job log. It actually said it was successfully deleted.
Version 3.0b sp22
Any help will be appreciated.
Thank you!

Hi,
I am not sure as to how this inconsistent deletion happened. In my experience this is not a scenario that happens regularly. It has not happened to me at all - Deletion of requests are being handled in Process Chains.
Here is a link to a 'best practices' document for the BW administrator.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/08f1b622-0c01-0010-618c-cb41e12c72be
BR/
Mathew.
Edited by: Mathew Muthalaly on Jul 23, 2008 6:02 AM

Facebook "Request for Permission" window opens but is not visible

Hi everybody,
our problem is the same like this: http://forums.adobe.com/thread/772904
I can push buttons on subj forms but they are not visible
Does anybody know how to solve it?
Thanks
Info:
I'm trying to connect to facebook from Flex Mobile project using FacebookMobile class.
If project is just Flex and class is FacebookDesktop - everithing is Ok.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Data loaded in Infocube is not visible in the Reporting

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh..

How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

Compressed request not visible

Similar Messages

Maybe you are looking for