Compressing audio files in Macbook

I'm trying to do something new - compress audio/mp3 files to send via email or on the website. I've used the 'right click' on my mouse pad and clicked on compress file, but a 24 meg mp3 file was only taken down to 23 meg.
When I used a windows notebook I had a 3rd party software called DietMp3 which really reduced the size of the file.
Does Mac have a native program or is there a good 3rd party program to do this?
One more: Is a .wav file smaller than an .mp3?
Thanks for your help!

You could re-encode the track in iTunes at a lower bit rate.
Just change the setting in iTunes preferences to a lower fate and then select the track you want to compress. No use the Create ACC version command you will find in the Advanced Menu. The file type shown (i.e. ACC or MP3) will depend on the settings you have selected.
Basically the DietMP3 software you use was just encoding the file at a lower bit rate, that is the only compression you can do.

Similar Messages

  • Compress audio file to mp3 or aiff of 5 MB?

    Hello,
    Does anyone know if I cam compress an audio file on GarageBand for the iPad 2? I'd like to take a file 30 minutes in length and be able to email it, so I need to compress it to 5 MB or less.

    only thing I can think of is "share with iTunes" and then once the file is in iTunes, compress it again there, by going to iTunes -> preferences and on the general tab, about 3/4 of the way down, click Import Settings and then set your settings to MP3 and then choose custom from the settings drop down and then choose a really low kbps bit rate. You may have to experiment, I haven't had coffee and can't do the math right now to suggest a bit rate for a 30 minute file becoming a 5MB MP3. Good luck!

  • Compressing Audio Files-Help please.

    Will compressing the audio files held on my hard drive in itunes meen that they can still be played as normal and will it have an effect on the synchronization with my ipod.

    By compressing, I assume you mean putting them in one of the standard formats, namely mp3 or AAC, but at a lower bit rate?
    If that is what you mean, then the answer is yes, you can still play them as normal. You will lose some audio quality due to the sonic information lost in the compression, so don't go do it wholesale until you have tried and assured that you are happy with the results.
    (If by compressing you mean something else, e.g. zipping them, then don't bother, since they will not compress much and will not be playable until you unzip them.)

  • Transfer of audio files to MacBook Air

    I need to transfer audio files from an Olympus VN711PC digital voice recorder to my MacBook Air and play back on the Mac. It transfers but when opens says "quicktime can't open." Can anyone tell me whether I can do this and what I need to do. Thanks

    Look at the downloaded file on your computer. If it has an extensions, as in "filename.ext", then what is that extension. If none is visible then select the file. Press COMMAND-I to open the Get Info window. In the filename panel uncheck the box to Hide the extension to make it visible.
    Lastly, check the camera's manual to find out how to get audio files out that would be compatible with computers, especially Macs.

  • Emagic's "ZAP" program - archived compressed audio files unable to open.

    I have a number of audio files that were compressed/packed using emagic's ZAP program that I was interested in revisiting but it seems my copy of "ZAP' has run out of authorisations over the years through computer meltdowns. Does anyone have a solution to this problem?
    Thanks.
    G5 Dual 1.8 Ghz   Mac OS X (10.4.8)   Logic Pro 7.2, Presonus FirepodX2

    Yeah, I think I have a copy on my PC, or if not, I could probably dig it out.
    There was a free unpack-only version of Zap that should enable you to get at your files - though where you could locate a copy I don't know. It might have been included on Logic master disks around V4.x.... It would probably be OS9 only I guess, for the Mac version.

  • Compress audio file?

    I need to make my podcast file much smaller. It's now 45MB, and it needs to be about 10MB.
    I changed the output to Mono in the Preferences.
    I haven't found anything else helpful in the Help Viewer/Help menu.
    Am I missing something? Any ideas? (any 3rd party apps?)

    How long is it (time)?

  • I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.

    I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.

    Use DropBox. https://www.dropbox.com/help/84/en
     Cheers, Tom

  • I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    iTunes will only import music from your phone that was purchased from the iTunes store.  To transfer music from other sources you have to use 3rd party software, such as PhoneView.

  • How do I compress an audio file?

    Hello,
    This is definitely an overloaded home page, but I am doing what I am told. I am working on making some of the images smaller for speed.
    http://www.peterspunch.com/
    My problem is that the audio works fine on my computer on Safari, but gets cut off on Flock and Firefox. Would a different audio file be more universal to browsers? Or is this just an overload problem? Or should I compress the audio file - its 4MB?
    Diloretta

    The audio file I see is 745 Kb, which is still a little large for a file being forced on your visitors. You could reduce the sample rate from 44100Hz and/or the bitrate from 128 kb/s.
    Is that Jimmy Buffet? Do you have clearance/license to use the music?
    You've also got some odd slicing of your images. More judicious use of transparent GIF or PNG files may be useful.

  • Can I import .cda audio file in iTunes on my Macbook Pro with OS X Yosemite

    Can I import .cda audio file in iTunes on my Macbook Pro with OS X Yosemite

    iNads,
    .CDA files are simple index files, less than 1 kB in size, that do not contain any audio.  There is no reason to import them.
    If you have the physical CD and wish to rip it into iTunes, you can import it per this guide:  iTunes 12 for Mac: Import songs from CDs

  • I'm trying to extract audio files from my OLYMPUS Digital Voice Recorder VN-6200PC I am getting this error whenever I try to play its file type on my MacBook Pro,"The document "VN622195.WMA" could not be opened. The movie's file format isn't recognized."

    I'm trying to extract audio files from my OLYMPUS Digital Voice Recorder VN-6200PC
    I am getting this error whenever I try to play its file type on my MacBook Pro,"The document “VN622195.WMA” could not be opened. The movie's file format isn't recognized."

    The mac has no native way to read .wma files (these are Windows Media Audio files).  Do a search on the internet for playing wma files on a mac.  You will find several links to solution (one is to use flip4mac).

  • How to process overly compressed high volume audio files

    I used a process in scientific filters in audition 3 to process overly compressed high volume audio files normalized to 0 db. It was like magic.
    How would you process this sort of file in Audition 6.

    Below was the process used in Adobe Audition 3. The sound was much improved. Try the steps on a file you have to hear the difference.
    Effects- Amplitude - Normalize - uncheck the decibles format box - normalize to and normalize L/R boxes checked, enter 48 into percentage box.
    After normalization was complete
    Effects - Filters - Scientific filters - select Chebychev 1 tab - band pass button and select the following parameters.
    Cutoff =4, high cutoff = 22050, order = 18 all other settings at defaults values (0). Delay radio button sellected, check the extended range box, press OK.
    Increase to appropriate volume after processing if necessary.

  • Please help me to compress & decompress an audio file

    hi every body ,i am a new member in this forum.i am having a problem with my new project named audio compression and decompression.i have done this, but i didnt play the audio file after decompression ,but the size of the original file and decompressed file are same .i am using mu-law technique for compression.if anybody can know the source code of this problem pls reply.advance thanks to all

    Dear baiju43,
    I've faced a problem: to compress an audio file and play it back.I've heard a good news that you have already done the compression.So please be a great helper and give me the code that compresses and if you are also able to play it,both of them.
    Thanks!
    Regards.

  • Mysterious audio 9GB of audio files on my Macbook Air

    I am mystified by 9GB of audio files being listed in the storage of my 64GB Macbook Air.  I have moved the iTunes library to an external HD and meticulously been through to look for audio files in finder, removing those I no longer need.  I have also repaired and indexed my main disc and revealed hidden files but been unable to find any obvious places where these files might be hidden. Any ideas?

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • My MacBook has 30gb of audio files that I can't find

    So there you can see that I have almost 30gb of audio files that I can't find anywhere. None of the folders say that it has many files.
    MacBook Pro
    Retina, Mid 2012
    Processor  2.3 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    Software  OS X 10.9.4

    I don't, I deleted the files from the iTunes folder.

Maybe you are looking for

  • Looking for a certain app

    I'm trying to find an app that is for all those little "tags" that you get from stores....cvs, kroger, best buy, the little tags that they scan when you check out.  I heard that there was an app out there that stored all those tags in one place, that

  • IPod Touch - 4th Gen - iOS 6 - Unable to Connect to Qwest WiFi

    I'm not totally certain this is the place or section to send in a complaint, but in my frustrated rush I will post here regardless. I have never had any problems connecting to my modem. Until just yesterday. I left to to go work, and came home to fin

  • Right click clip in sequence to remove attributes does not work?

    Trying to get my old head around the three way color corrector. In the process when I try to right click a clip in the sequence to remove the attributes it does not work. When I do it again the filter square is still ticked. What am I doing wrong? Th

  • Business Objects, Value Objects and more

    Hey, I've got a general question about business objects (aka entity objects or data transfer objects). The scenario I am using is not one of my own, but it might be a future one. Thus, I'd really appreciate all feedback. Let's say that i've got a des

  • How to have the check box fields in the table ...Please help me out.

    Hi can any one give me code save the checkbox field to save in the table. I have displayed the checkboxes using the loops from the table but when i am clicking the checkboxes and pressing the button save its not saving in the database table. please h