Compressing audio in Captivate 5 from 44mhz to 22mhz

Hi all, using TCS 2.5 on Windows 7, 64 bit. I'm trying to compress the imported audio (mp3s) in my Captivate project from 44 mhz to 22 mhz. I used to do this (in Captivate 4) by going into Audio >> Settings >> Selecting 22.050 mhz from the choices. This isn't there anymore and my file size is quite large.
Does anyone know where this setting is now located in Captivate 5?
Thanks,
Adriana

Does the issue disappear with a reboot? If not, try removing your Preferences folder, or clearing your Cache (under Preferences).

Similar Messages

Not compressing audio from MPEG

I'm trying to use an MPEG in FCP, but it won't see the audio. I tried to throw it into Compressor, but Compressor says that it won't compress audio from an MPEG 1 or MPEG 2. Any advice?
Thanks.

I had only used it to rip from DVDs to this point . . . seems to be quite a bit more useful than I have seen it so far. Thanks!

Audio file missing from MOV when exported as a quicktime movie.

Using Keynote 9, I imported video into presentation that was edited in iMovie 9. When I export the presentation to quicktime movie the audio is missing from the video file. The audio file plays fine in the standard keynote presentation mode.

This is STRICTLY a work around! Official fix will come from Apple as an update more than likely.
Duplicate item first (File > Duplicate). On newly duplicated project change file association type (File > get info). Under name and extension section take out .key). Close Get Info and save with removing .key. Double click to open the file (now a compression). Open uncompressed folder (same name as original file, now shows as a folder). Now in the Data folder find a .mov file named "Recording" with randomly generated letters and numbers behind it. Drag .mov file to desktop or any other directory. Open extracted .mov file with QuickTime to verify integrity. Save as audio file only. Get Info on file again and place .key value at end of file/extension for project. Open project. Under Play menu option delete the recording. Under Audio inspector drag the .mov of audio only to recording back in. Test play project to see if its accurate. Export to QuickTime and see if issue is resolved.
If issue persists:
Export with corrupted audio as QuickTime. Separate the audio from video track. Delete audio. Import the extracted .mov audio file. Share > File. Enjoy.

Sorting Audio when inserting from the library

Using Captivate 5, I am adding audio to slides from the library. The library is sorted by name ascending. When it is accessed in the dialog box shown below, the sort order is unknown. I have to examine the entire list to find the item I need. Is this a bug or is there a remedy?

Can you please make sure, whether the book you are trying to copy has the Copy Permission allowed?
Also please have a look at the solution provided in thread having similar problem, error message "no permission to copy document here"

HT4437 how can i stream audio to ipad from video playing on the apple tv using air play?

how can i stream audio to ipad from video playing on the apple tv using air play?

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Compressing audio signal to disk

When recording vocals I use a compressor on the insert to the track I'm recording to. This does not compress the audio to disk, it seems only to be monitoring the compessed signal. How do I compress the audio to disk
as I record? I used to be able to do this when I used DAE. I would use an aux track with the compressor on the insert, set the proper input on the aux track, then set the output of the aux track to a bus. I would then be able to access the bus as an input on the track I wanted to record it to and the signal would go to disk with the compression. Now that I use Core Audio I can't set the input of any track to anything except Input. I can't set bus to come up when on click on the input on the audio track. How Do I get bus to come up as an option when I click on the input of the audio track?
G5 Dual 2.7 3.5 Gig of ram Mac OS X (10.4.6) FireFace 800 audio interface

I believe what you're looking for in this case is an Input Object. I personally have never used the INput Object, but it's my understanding this is one of its uses. Page 297 of the "Logic pro Reference" PDF has the details.
On a side note, just be aware, that when compressing with a plug-in, the compression is happening AFTER the A/D conversion. So if you're compressing to keep overs from happening, they can still be happening as they get to Logic, and by then it's too late. The over has happened. If you're compressing for a "sound" or "color", then it obviously works well in that situation.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.

Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred

How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Instant messenger programme that supports audio and video from mac to pc

hi
can anyone recommend a good IM programme that gives audio and video from a mac to a windows based pc.i am using an isight on my mac and the person at the other end is just using a bog standard web cam.i tried yahoo but didnt realise it doesnt support audio for the mac, arghhhhhh. i have also seen something called mercury messenger is this any good.i have an ibook g4 running osx 10.4 and other end using win xp
many thanks karl
ibook g4 Mac OS X (10.4.6)

Hi kb1483,
iChat to AIM 5.9 or Trillian works for me.
FAQ on subject http://discussions.apple.com/thread.jspa?threadID=406147
But then I wrote that FAQ and this is a Discussion area on the device Apple produced to work with iChat.
EZ Jim's FAQ on subject http://discussions.apple.com/thread.jspa?threadID=433863
EZ Jim's FAQ on applications that work with an iSight
http://discussions.apple.com/thread.jspa?messageID=607501&#607501
Another help site on subject http://www.mvldesign.com/videoconferencetutorial.html
4:17 PM Tuesday; May 23, 2006

HT2494 what connector to buy to transfer audio and video from macbook to tv?

what connector to buy to transfer audio and video from macbook to tv? I read that if I buy the normal mini display port to hdmi converter that the audio will not transmit through my tv. I there a certain thing I need to buy to make this happen? I have a Macbook 13 inch Early 2008.

You can sync photos and videos to your iPad via your computer's iTunes.
To sync photos, connect and select your iPad on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via option-command-S on a Mac), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If the videos are films that you want to go into the Videos app then you first need to add them to your computer's iTunes library via File > Add To Library, and you can then use the Films/Movies tab to select and sync them
Syncing media : iTunes: Syncing media content to iPod
What format are the videos in that you want to download, and have you got an app on your iPad that supports that format ?

Extract Audio Narration Track from Keynote with Voice Over

I just found a way to extract the audio narration track from a keynote I recorded using the voice over feature.
I used BetterZip.
I right-clicked on my keynote to show the "Open With..." contextual menu. I had the keynote open with BetterZip instead of Keynote and it extracted all the elements of the presentation into a folder. I saw in there several audio tracks.
Now, Keynote did not split the audio tracks into individual slide snippets but that's better than any other technique I have read on this forum so far.
I hope this helps someone in the future.

If you save your Keynotes as a package, then you can right click and +Show Package Content+ and see all the files that make up your Keynote as well. To save your Keynotes as a package go to Preferences and click +Save new documents as packages.+

My burned audio CD/DVD from iTunes doesn't play on a CD/DVD audio player

If I burn audio CD or DVD from my iTunes, I cannot play this music on an external player. Any recommendations? Thanks
iBook G4 Mac OS X (10.4.5)

Hi I just burned an MP3 CD straight from iTunes, and it doesn't play on any MP3 CD player I've tried it on (car MP3 deck, DVD player that plays audio CDs, and MP3s). Audio CDs burned from iTunes work fine though.
I've read somewhere, that when burning MP3 CDs from iTunes, iTunes burns it with Apples standard format, rather than CD players standard format of ISO 9660. And that is the reason why burned MP3 CDs from iTunes only plays on a Mac.
A work around I've done was select all the songs from my list duplicate them in another folder, and then reconvert them in MP3s (so that I don't have to search all over the place for each MP3 file). I then burned these MP3s onto a CD-R using toast's MP3 CD format. And it works on all my MP3 CD players. However, in doing this process, I've lost all the tags for each MP3. The only thing that comes up in the display is the name of the song. Artist, Album, etc... don't show up anymore.
Is there a way of burning an MP3 CD that will play on all MP3 enabled players, while keeping all ID Tags intact, in iTunes?
Thanks.
G4 AGP 1.2Ghz upgrade, 896MB ram, LaCie DVD RW Mac OS X (10.3.9) StarTech USB 2.0 card, 30GB, 80GB, 120GB HDs

Audio to TV from macbook pro

I am using an HMDI cable along with an adapter to get streaming video to my TV. Once I figured out the mirroring issue it works great except the audio. It doesn't transfer to the TV like the video did. Audio still comes from the laptop. Any ideas?

See this thread:
https://discussions.apple.com/message/15205259#15205259
The advice I gave there will apply to you if your machine was made before April 2010. If it was made after then, please post back with details of your audio settings and a URL for the exact HDMI adapter you purchased.

PPro CS4 - half of audio is missing from exported files

Hi all.
I'm currently working on a project in PPro CS4, and by that I mean that I've already completed the project. It was exported and uploaded to youtube for my boss, no problems. Then he asked me to combine the two videos, so I copied the second half of the video and pasted it onto the first half's sequence. The settings I used for the two sequences were the same. When I play the video in PPro everything works fine. When I export the video, however, the audio is missing from the second half of the video (the half I copied). The second half audio is on the same track as the first half of the audio, so the audio levels on the exported video should be exactly the same.
I've been browsing the forums and looking at troubleshooting pages but I still haven't found a solution to the problem. The video is intact; only the second half of the audio is missing. I have no idea why it's doing this or how to fix it.
I'd appreciate any input.
-RD

Yes, if he is exporting one file of video and audio then either the entire track is exported
or only the work area bar is exported for both video and audio. If he is exporting video and audio separately THEN they might be different lengths.
You might right-click the audio for the second section and select Audio to see if it is muted.
Try exporting the audio alone without video, listen to the audio in Windows Medica player and listen if all or only half of it exported. If all of it exported, then that narrows the problem.
You might try creating a new Sequence and pasting the video and audio into the new Sequence (don't just duplicate the sequence, that may just duplicate the problem). Then export and see if that circumvented the problem.
What format are you exporting to?

Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!

Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!
I want to get the audio out of the lightning connection (the way you get audio when you connect it to a dock). It works properly with music, but when making a telephone call, it switches to the internal speraker. You can change to the external spekers, but you cannot select another audio out. It's also possible to get the telephone audio from the analogue connection, but that's not what I want. I want telephone audio from lightning...
Would be so great if anybody has an idea

I must also say that the second update ruined my Lumia's battery life.
With the first (out-of-the-box) update the phone usually had 30 percent of battery after a quite hard day (e.g. more than an hour of talking via bluetooth handsfree, more than two hours of listening to the music via bluetooth, more than an hour of browsing via wifi, and reading hundreds of e-mails via two mail accounts). I never managed to discharge it after one day (e.g. 14-16 hours) of continous use, no matter how much I talked, listened and browsed.
Now, with the secod update, it discharges to 20% after 12 hours of laying still almost without use (30 mins of music, less than 15 mins of talking and nothing more), and discharges completely with the usage pattern described above.
Did the second update contain some Android code?

Compressing audio in Captivate 5 from 44mhz to 22mhz

Similar Messages

Maybe you are looking for