Compression Factor=1 error during Ticket actualisation

While actualising a Ticket error came Compression Factor=1 for chosen set of base condition,I have checked all the reading group & Conversion group , can anyone help.
Regards,
Nalini

Hi nalini,
Have a look at note 1091414 in service market place.
Regards,
Sandil

Similar Messages

Error during VM container communication between ABAP and JAVA

Hello,
While creation of SC, I am getting error "Error during VM container communication between ABAP and JAVA"
Based on earlier responses in this forum, I checked following activity.
1. T Code - BBP_CND_CHECK_CUST
Result - IPC Pricing is Active and IPC is now running in VMC
2. Run Report - RSVMCRT_HEALTH_CHECK
Result - The Java component is deactivated
3. As per OSS note 854170, Profile parameters were existed as below
a) vmcj/enable - on
b) vmcj/option/maxJavaHeap = 200M
So, How to get Java component activated?
Thanks,
Rahul Mandale

Thanks Markus,
For SM53, I am getting resulets as " Java is not active on this application server - Message no. SVMCRT011"
Can you suggest, what I need to do for it? I can't use SRM Shopping cart because of it. thanks in advance, Rahul
and dev_w0 trace ....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Wed Aug 31 15:45:40 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno      04
M sid        CUS
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    52
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        456
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 456) [dpxxdisp.c   1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          18304     (1408)
M DpShMCreate: sizeof(tm_adm)          3954072     (19672)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1452)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 31 15:45:41 2011
M ThInit: running on host crmsys
M
M Wed Aug 31 15:45:42 2011
M calling db_connect ...
C Prepending D:\usr\sap\CUS\DVEBMGS04\exe to Path.
C
C Wed Aug 31 15:45:47 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
C Attaching to DB Server CRM (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Wed Aug 31 15:45:48 2011
C Now '/@CRM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=061A3EC8,usrhp=061CA558)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C Now 'SAPSR3/<pwd>@CRM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CRM is running on CRMSYS with ORACLE version 10.2.0.1.0 since 20110831
B
B Wed Aug 31 15:45:49 2011
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20110831 154542 CRMSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 31 15:46:12 2011
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0A7C0040, size: 4400000)
M SHM_ROLL_AREA          (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA          (addr: 0AC00040, size: 32768000)
M SHM_ROLL_ADM               (addr: 0CB50040, size: 615040)
M SHM_PAGING_ADM          (addr: 0CBF0040, size: 525344)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0CC80040
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12160 bytes (50 server) at 0CD10040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10E700C8, size: 30000000, end: 12B0C448)
B dbtbxbuf: Buffer TABLP (addr: 12B100C8, size: 10240000, end: 134D40C8)
B dbexpbuf: Buffer EIBUF (addr: 0FBA00D0, size: 4194304, end: 0FFA00D0)
B dbexpbuf: Buffer ESM   (addr: 134E00D0, size: 4194304, end: 138E00D0)
B dbexpbuf: Buffer CUA   (addr: 138F00D0, size: 3072000, end: 13BDE0D0)
B dbexpbuf: Buffer OTR   (addr: 13BE00D0, size: 4194304, end: 13FE00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Wed Aug 31 15:46:15 2011
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1946AA80
S
S Wed Aug 31 15:46:16 2011
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D6D00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D6D0430
S    using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Wed Aug 31 15:46:18 2011
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Wed Aug 31 15:46:20 2011
A ABAP ShmAdm attached (addr=57A40000 leng=20955136 end=58E3C000)
A >> Shm MMADM area (addr=57EB5E58 leng=126176 end=57ED4B38)
A >> Shm MMDAT area (addr=57ED5000 leng=16150528 end=58E3C000)
A RFC Destination> destination crmsys_CUS_04 host crmsys system CUS systnr 4 (crmsys_CUS_04)
A
A Wed Aug 31 15:46:21 2011
A RFC Options> H=crmsys,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 13730 bytes at 0FFB0040
N
N Wed Aug 31 15:46:22 2011
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\CUS\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\CUS\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Wed Aug 31 15:46:23 2011
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B     max_blocking_factor = 15, max_in_blocking_factor      =   5,
B     min_blocking_factor = 10, min_in_blocking_factor      =   5,
B     prefer_union_all    =   0, prefer_join                 =   0,
B     prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B     convert AVG         =   0, alias table FUPD            =   0,
B     escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B     select *            =0x0f, character encoding          = STD / <none>:-,
B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W
W Wed Aug 31 15:46:24 2011
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.52.20050900]
W    ITS Plugin: Int.version, [32]
W    ITS Plugin: Feature set: [10]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmsys_CUS_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Wed Aug 31 15:46:48 2011
B table logging switched off for all clients
M
M Wed Aug 31 15:47:55 2011
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05BD0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05BD07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05BD07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05BD07EC
A
A Wed Aug 31 15:48:44 2011
A RFC FRFC> fallback on the central gateway crmsys sapgw04 activ
B
B Wed Aug 31 15:49:47 2011
B dbmyclu : info : my major identification is 3232288873, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is D98FA690E8AA314D9B69930868792664.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.

Error during Heterogeneous System Copy - Phase 18 Import ABAP

Hello gurus,
I´m facing an error during the Target Installation in a Heterogeneous System Copy (Migration). The system SAP is a SAP ECC 6.0 SR3 (Unicode and Abap+Java).
Source server:
Operation System: Windows 2003 Server x64
Database: SQL Server 2008 SP01
Target server:
Operation System: Red Hat Enterprise Linux (RHEL) X64
Database: Oracle DB 10.2g (10.2.0.4)
I already did the all procedures in export database and all that looks fine!
At this point I´m running the system copy procedure through SAPInst on target server (RHEL / Oracle) but in phase 18 - Import ABAP the sapinst stops... (by the way in procedure bar, I can see "Import Monitor jobs: running 0, waiting 1, completed 0, failed 18, total 19")
I checked three log files (sapinst_dev.log ; sapinst.log ; SAPSDIC.log):
SAPSDIC.log:
/usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20100820145140
/usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/QAS/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jan 23 2008 17:39:05
/usr/sap/QAS/SYS/exe/run/R3load -ctf I /software/export_preparation/ABAP/DATA/SAPSDIC.STR /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS/DDLORA.TPL SAPSDIC.TSK ORA -l SAPSDIC.log
(TPL) ERROR: unknown template variable "compress"
/usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20100820145140

Hi Volker,
> (TPL) ERROR: unknown template variable "compress"
> This message looks like the DDLORA.TPL contains stuff that should not belong there.
> Can you attach the DDLORA.TPL.
> There are some bugs with SMIGR_CREATE_DDL, but they are mostly not related to oracle.
prikey: AFTER_LOAD ORDER_BY_PKEY
seckey: AFTER_LOAD
cretab: CREATE TABLE &tab_name&
        ( /{ &fld_name& &fld_desc& /-, /} )
        TABLESPACE &tablespace&
        &compress&
        &lob_cache&
        STORAGE (INITIAL     &init&
                 NEXT        &next&
                 MINEXTENTS &minext&
                 MAXEXTENTS &maxext&
                 PCTINCREASE &pctinc& )
drptab: DROP TABLE &tab_name&
crepky: CREATE UNIQUE INDEX &pri_key&
        ON &tab_name&
        ( &key_fld& /-, )
        TABLESPACE &tablespace&
        STORAGE (INITIAL     &init&
                 NEXT        &next&
                 MINEXTENTS &minext&
                 MAXEXTENTS &maxext&
                 PCTINCREASE &pctinc& )
                 NOLOGGING
                 COMPUTE STATISTICS ;
        ALTER INDEX &pri_key& LOGGING
drppky: DROP INDEX &pri_key&
creind: CREATE &unique& INDEX &ind_name&
        ON &tab_name&
        ( /{ &fld_name& /-, /} )
        TABLESPACE &tablespace&
        STORAGE (INITIAL     &init&
                 NEXT        &next&
                 MINEXTENTS &minext&
                 MAXEXTENTS &maxext&
                 PCTINCREASE &pctinc& )
                 NOLOGGING
                 COMPUTE STATISTICS ;
        ALTER INDEX &ind_name& LOGGING
drpind: DROP INDEX &ind_name&
crevie: CREATE VIEW &view_name&
        ( /{ &fld_name& /-, /} )
        AS &query&
drpvie: DROP VIEW &view_name&
trcdat: TRUNCATE TABLE &tab_name&
deldat: DELETE FROM &tab_name& &where&
negtab: LICHECK MLICHECK
negdat: LICHECK MLICHECK
negind: LICHECK0 MLICHECK0 LICHECK0 MLICHECK0
negvie:
negcpr:ARFCSSTATE ARFCSDATA ARFCRSTATE TRFCQDATA TRFCQIN TRFCQOUT TRFCQSTATE QRFCTRACE QRFCLOG
table storage parameters
loc: APPL0 PSAPSR3                 0000
     APPL1 PSAPSR3                 0000
     APPL2 PSAPSR3                 0000
     CLUST PSAPSR3                 0000
     DDIM PSAPSR3                 0000
     DFACT PSAPSR3                 0000
     DODS PSAPSR3                 0000
     POOL PSAPSR3                 0000
     SDIC PSAPSR3                 0
     SDOCU PSAPSR3                 0000
     SLDEF PSAPSR3700              0000
     SLEXC PSAPSR3700              0000
     SLOAD PSAPSR3                 0000
     SPROT PSAPSR3                 0000
     SSDEF PSAPSR3700              0000
     SSEXC PSAPSR3700              0000
     SSRC PSAPSR3                 0000
     TEMP PSAPSR3                 0000
     USER PSAPSR3USR              0000
     USER1 PSAPSR3USR              0000
sto: 0 0000000016K 0000000040K 0000000001 2147483645
     1 0000000016K 0000000160K 0000000001 2147483645
     10 0000000016K 0000655360K 0000000001 2147483645
     11 0000000016K 0001310720K 0000000001 2147483645
     12 0000000016K 0002621440K 0000000001 2147483645
     13 0000000016K 0005242880K 0000000001 2147483645
     14 0000000016K 0010485760K 0000000001 2147483645
     2 0000000016K 0000000640K 0000000001 2147483645
     3 0000000016K 0000002560K 0000000001 2147483645
     4 0000000016K 0000010240K 0000000001 2147483645
     5 0000000016K 0000020480K 0000000001 2147483645
     6 0000000016K 0000040960K 0000000001 2147483645
     7 0000000016K 0000081920K 0000000001 2147483645
     8 0000000016K 0000163840K 0000000001 2147483645
     9 0000000016K 0000327680K 0000000001 2147483645
index storage parameters
loc: APPL0 PSAPSR3                 0000
     APPL1 PSAPSR3                 0000
     APPL2 PSAPSR3                 0000
     CLUST PSAPSR3                 0000
     DDIM PSAPSR3                 0000
     DFACT PSAPSR3                 0000
     DODS PSAPSR3                 0000
     POOL PSAPSR3                 0000
     SDIC PSAPSR3                 0
     SDOCU PSAPSR3                 0000
     SLDEF PSAPSR3700              0000
     SLEXC PSAPSR3700              0000
     SLOAD PSAPSR3                 0000
     SPROT PSAPSR3                 0000
     SSDEF PSAPSR3700              0000
     SSEXC PSAPSR3700              0000
     SSRC PSAPSR3                 0000
     TEMP PSAPSR3                 0000
     USER PSAPSR3USR              0000
     USER1 PSAPSR3USR              0000
sto: 0 0000000016K 0000000040K 0000000001 2147483645
     1 0000000016K 0000000080K 0000000001 2147483645
     10 0000000016K 0000163840K 0000000001 2147483645
     11 0000000016K 0000327680K 0000000001 2147483645
     12 0000000016K 0000655360K 0000000001 2147483645
     13 0000000016K 0001310720K 0000000001 2147483645
     14 0000000016K 0002621440K 0000000001 2147483645
     2 0000000016K 0000000160K 0000000001 2147483645
     3 0000000016K 0000000640K 0000000001 2147483645
     4 0000000016K 0000002560K 0000000001 2147483645
     5 0000000016K 0000005120K 0000000001 2147483645
     6 0000000016K 0000010240K 0000000001 2147483645
     7 0000000016K 0000020480K 0000000001 2147483645
     8 0000000016K 0000040960K 0000000001 2147483645
     9 0000000016K 0000081920K 0000000001 2147483645

VLD-1141: Internal error during mapping generation.

I am getting the "VLD-1141: Internal error during mapping generation" error when deploying a mapping. This mapping was previously working fine. As part of a re-factoring effort, for all the underlying tables and views, we replace 2 existing columns with a new column. All the objects were successfully re-imported and synchronized in the mapping. The mapping is using Mapping Input Parameter, Lookups, Expression Transformations, Splitter, Set Operator, Source & Target Tables. All these transformation were part of the earlier working version of the mapping.
On doing validation within the mapping, I get a success message followed by 4 warning for the Lookup Condition on key Lookup does not contain a complete unique key. Before the re-factoring effort, I was getting the same 4 warning messages, however the mapping was executing correctly.
When I do Generate within the mapping, I get the following message:
Code cannot be generated.
Click the message tab for details.
In the Design Center, when I do a validation on the mapping I get the following error:
VLD-1141: Internal error during mapping generation.
java.lang.NullPointerException
at oracle.wh.service.impl.mapping.component.Sequence.getSequenceExpressions(Sequence.java:138)
at oracle.wh.service.impl.mapping.component.Sequence.doSequenceValidation(Sequence.java:239)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:123)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:97)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext(EntitySqlDelegate.java:78)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:240)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBasedInternal(PlSqlGenerationMediator.java:2108)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBased(PlSqlGenerationMediator.java:2090)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:541)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:798)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:335)
at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:102)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
Any help in this regards would be appreciated.
Naval

Hi,
I think your mapping is corrupted by converting two columns to one. The owb has always a problem if you change the structure of a table which is bound to a table operator. The way to avoid this is to drop the table operator after changing the table in the table editor and recreate it with the changed table definition.
Make a test: select the new attribut in the table operator and look left on the configuration window. To which table and attribute it's bound?
Regards,
Detlef

ACTIVATION Error during phase MAIN_SHDRUN/ACT_UPG

Hello Experts,
I am facing an activation error during upgrade o ECC 6.0 EHP 6 in shadow instance.
ERROR: Detected the following errors:
# F:\SUM\abap\log\SAPA702EPU.UAS: 3 EDT012XActivate table "PTRV_UTIL_VPFPS_VPFPA_P" 3 EDT402 Append structure "PTRV_VPFPS_VPFPA_P_APPEND" appended to table "PTRV_UTIL_VPFPS_VPFPA_P" 1EEDT963 Field "TIME_DURATION" in table "PTRV_UTIL_VPFPS_VPFPA_P" is specified twice. Please check 2WEDT135 Flag: 'Incorrect enhancement category' could not be updated 3 EDT013 Table "PTRV_UTIL_VPFPS_VPFPA_P" was not activated 1EEDO519X"Table" "PTRV_UTIL_VPFPS_VPFPA_P" could not be activated 3 EMC738XActivate view "V_T706S_EHP" 1EEMC560 Field "T706S"-"D2100" does not exist 1EEMC560 Field "T706S"-"EXCHANGE_DATE" does not exist 1EEMC560 Field "T706S"-"TRIP_BREAK_CNTRY" does not exist 3 EMC742 View "V_T706S_EHP" was not activated 1EEDO519 "View" "V_T706S_EHP" could not be activated
...skipped 13 more lines. Please see ACTUPG.html for more information.
SAPup_troubleticket.log
This trouble ticket was created by SAPup on 20140801092425
SAPup broke during phase ACT_UPG in module MAIN_SHDRUN / Shadow System Operations: SPDD and Activation
Error Message: Detected 5 errors summarized in 'ACTUPG.ELG'
Calling 'F:\SUM\abap\exe/tp' failed with return code 8, check F:\SUM\abap\log\SAPup.ECO for details
tp used shadow connect
ACTUPG.ELG:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in F:\SUM\abap\log\SAPA-10202INPOASBC.UAS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<NO ERROR LINES FOUND, BUT HIGHEST EXIT CODE WAS: "8">
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA702EPU.UAS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   3 EDT012XActivate table "PTRV_UTIL_VPFPS_VPFPA_P"
   3 EDT402 Append structure "PTRV_VPFPS_VPFPA_P_APPEND" appended to table "PTRV_UTIL_VPFPS_VPFPA_P"
   1EEDT963 Field "TIME_DURATION" in table "PTRV_UTIL_VPFPS_VPFPA_P" is specified twice. Please check
   2WEDT135 Flag: 'Incorrect enhancement category' could not be updated
   3 EDT013 Table "PTRV_UTIL_VPFPS_VPFPA_P" was not activated
1EEDO519X"Table" "PTRV_UTIL_VPFPS_VPFPA_P" could not be activated
   3 EMC738XActivate view "V_T706S_EHP"
   1EEMC560 Field "T706S"-"D2100" does not exist
   1EEMC560 Field "T706S"-"EXCHANGE_DATE" does not exist
   1EEMC560 Field "T706S"-"TRIP_BREAK_CNTRY" does not exist
   3 EMC742 View "V_T706S_EHP" was not activated
1EEDO519 "View" "V_T706S_EHP" could not be activated
   3 EDT014XActivate dependent table "/MRSS/T_CUP_OBJECT"
   1EEDT242 Field "FIELD_DESCRIPTIONS": Component type or domain used not active or does not exist
   2WEDT183 Field "INSTANCE"-"/MRSS/IF_CUP_OBJECTS": Reference type used is not active
   1EEDT005 Nametab for table "/MRSS/T_CUP_OBJECT" cannot be generated
   3 EDT015 Dependent table "/MRSS/T_CUP_OBJECT" was not activated
1EEDO519 "Table" "/MRSS/T_CUP_OBJECT" could not be activated
   3 EDT014XActivate dependent table "T706S"
   1EEDT963 Field "TRIP_BREAK" in table "T706S" is specified twice. Please check
   3 EDT015 Dependent table "T706S" was not activated
1EEDO519 "Table" "T706S" could not be activated
1 ETP111 exit code           : "8"
SAPA702EPU.SID
ent tables)
2WEDO549 "View" "V_TWGVALE" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWH01" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF0100" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF0200" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF0250" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF0260" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF501" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF600" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF8003" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWLOF" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWMWQ" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWPC_COLHEAD" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWPC_COLHEAD_C" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWRF2" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWSD" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWTFMA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWZLA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TXW_AD01D" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZB0W" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZB6D" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZBABG" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZBABGZB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZD0B" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZD0BI" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZD0BW" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZE02" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZE03D" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZONE_M" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZPAB3" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZT01" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZT01D" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZV04" was activated (warning for the dependent tables)
2WEDO549 "View" "V_UEBER" was activated (warning for the dependent tables)
2WEDO549 "View" "V_USCOMP" was activated (warning for the dependent tables)
2WEDO549 "View" "V_USCOMPA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_USR_NAME" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VGNVA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VGNWA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_BUK" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_GE" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_GFL" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_GR" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_GRA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_WE" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIOB01" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIOB02" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIOB03" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VITXT" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VLBLTD" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VLTD" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VTDST" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VTSPLS" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WBEW" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WCUSDOC_RELA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WITH_CTNCOT005" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFBA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFBB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFKC" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFRA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFRB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFZA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFZB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFZUC10" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRBLA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRGLA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRGLB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRLBA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRSZ" was activated (warning for the dependent tables)
2WEDO549 "View" "WB2_V_VBRK_WBGT" was activated (warning for the dependent tables)
2WEDO549 "View" "WB2_V_WBRK_WBRP" was activated (warning for the dependent tables)
2WEDO549 "View" "WB2_V_WBRK_WBRP2" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVAP" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVHE" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVITX" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVJ" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVM1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVN1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO2" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO3" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO4" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO5" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO6" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO7" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO8" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO9" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOA" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOC" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOD" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVODX" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOE" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOF" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOI" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP0" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP2" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP3" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP4" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP5" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP6" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP7" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP8" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVPN1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVPU1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVW" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVWA1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVWA2" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVZ1" was activated (warning for the dependent tables)
2WEDO549 "View" "YWM_VSNACH_LIKP" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_DLR_BR" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_DLR_PROOR" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_EMGAR_DC" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_USR_DISTR" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_WORKBY" was activated (warning for the dependent tables)
2WEDO549 "View" "ZZLIB_V_HKTK" was activated (warning for the dependent tables)
2WEDO549 "View" "ZZLIB_V_LIFNR_C" was activated (warning for the dependent tables)
1 ED0301X*************************************************************************
1 ED0306       "Final log"
1 ED0322 End phase "006" ***********************************************************
1 ED0320XStart phase "007" **********************************************************
1 ED0306       "Statistics on Activated and Deleted Objects"
1 ED0301 *************************************************************************
1 EDO601XNumber of objects to be activated............: "35325"
1 EDO605 Objects not activated........................: "4"
1 EDO606 Activated objects with errors in dependencies: "4"
1 EDO604 Objects activated with warning...............: "5531"
1 EDO603 Successfully activated objects...............: "29786"
1 EDO602 Number of objects to be deleted..............: "128"
1 EDO608 Objects not successfully deleted.............: "0"
1 EDO607 Successfully deleted objects.................: "128"
1 EDO609 Tables/views with DROP/CREATE................: "0"
1 EDO610 No. of them marked for DROP/CREATE: "0"
1 EDO611 Not marked for DROP/CREATE: "0"
1 EDO620 Number of nametabs to be deleted.............: "0"
1 EDO622 Successfully deleted nametabs................: "0"
1 EDO621 Nametabs that were not successfully deleted..: "0"
1 ED0301X*************************************************************************
1 ED0306       "Statistics on Activated and Deleted Objects"
1 ED0322 End phase "007" ***********************************************************
1 ED0302X=========================================================================
1 ED0314 Mass Activation
1 ED0302 =========================================================================
1 ED0327 Process..................: "defnsv1466_14_59636"
1 ED0319 Return code..............: "8"
1 ED0313 Phase 001..................: 00:00:13 (Take Over Switch-Dependent Objects)
1 ED0314 Phase 002..................: < 1 sec. (Deletion of objects: 1th call)
1 ED0314 Phase 003..................: 00:00:47 (Berechnung der Abhängigen:)
1 ED0313 Phase 004..................: 00:15:00 (Object Activation)
1 ED0314 Phase 005..................: < 1 sec. (Puffer Sync für Abhängige refTo ...)
1 ED0314 Phase 006..................: < 1 sec. (Final log)
1 ED0314 Phase 007..................: < 1 sec. (Statistics on Activated and ...)
1 ED0309 Program runtime..........: "00:16:01"
1 ED0305 Date, time...............: "01.08.2014", "09:23:55"
1 ED0318 Program end==============================================================
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time   : "20140801092355"
1 ETP111 exit code           : "8"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED END OF ACT_UPG =====================================================
Please suggest.
Regards,
Alok

Hi Divyanshu,
thanks for your prompt reply,
As per the error occurred, PTRV_UTIL_VPFPS_VPFPA_P is the table but when I check in SE16 its saying PTRV_UTIL_VPFPS_VPFPA_P not a table its a STRUCTURE
In SE11 its saying "PTRV_UTIL_VPFPS_VPFPA_ "does not exist.Check name.
Here it is not taking full name of table "PTRV_UTIL_VPFPS_VPFPA_P".
Pl suggest.
BR,
Alok

Cisco SG300 HOSTP_flash_operation: fatal error during read operation!

I have 2 Cisco SG300-52P switches. Earlier this week, one of them started dropping connections and POE was not working on a couple of devices... I came in this morning to restart them when no one else was around. After restarting them, the troublesome one was still not detecting POE devices.
I have been waiting for some down time to do a firmware update, so I thought this might straighten things out. I Downloaded the updated bootloader and firmware from Cisco's site. Updating the (non-problem) SG300 went exactly as it should. Upgrading the the bootloader on the problem SG300 went exactly as it should. Started the firmware update on the problem switch ....... and it didn't come back online. The power light was flashing, and occasionally the lights on ports would blink like they were trying to reset, but they never made it. There weren't really any special configurations on this switch so I had nothing to lose by trying a factory reset via the pinhole on the front ...... same result.
I connected to the serial port via a win7 PC with putty. .. All setting per Cisco. I got a message that the connection was detected, but it would not accept keyboard input. I power cycled the SG300 and watched the messages go by ... It looked like everything was working. I even got a message that the "Initialization task was completed"..
Then this message "HOSTP_flash_operation: fatal error during read operation!"
We have had a couple of internet and power outages recently, but I am trying to rule out other issues before blaming it on that.
any suggestions?
putty output file attached

I am not familiar with SG series products, but looking at the error message in the attached file, it appears there is an issue with reading from the flash. It could be that the flash file is corrupted and the flash needs to be formatted and then reload the software again.
If you have support contract on the product, I would suggest you open a TAC ticket with Cisco and have them help you.
HTH

ERROR [B3108]: Unrecoverable out of memory error during a cluster operation

We are using Sun Java(tm) System Message Queue Version: 3.5 SP1 (Build 48-G). We are using two JMS servers as a cluster.
But we frequently getting the out of memory issue during the cluster operation.
Messages also got queued up in the Topics. Eventhough listeners have the capability to reconnect with the Server after the broker restarting, usually we are restarting consumer instances to get work this.
Here is detailed log :
Jan 5 13:45:40 polar1-18.eastern.com imqbrokerd_cns-jms-18[8980]: [ID 478930 daemon.error] ERROR [B3108]: Unrecoverable out of memory error during a cluster operation. Shutting down the broker.
Jan 5 13:45:57 polar1-18.eastern18.chntva1-dc1.cscehub.com imqbrokerd: [ID 702911 daemon.notice] Message Queue broker terminated abnormally -- restarting.
Expecting your attention on this.
Thanks

Hi,
If you do not use any special cmdline options, how do you configure your servers/
brokers to 1 Gb or 2 Gb JVM heap ?
Regarding your question on why the consumers appear to be connecting to just
one of the brokers -
How are the connection factories that the consumers use configured ?
Is the connection factory configured using the imqAddressList and
imqAddressListBehavior attributes ? Documentation for this is at:
http://docs.sun.com/source/819-2571/ref_adminobj_props.html#wp62463
imqAddressList should contain a list of brokers (i.e. 2 for you) in the cluster
e.g.
mq://server1:7676/jms,mq://server2:7676/jms
imqAddressListBehavior defines how the 2 brokers in the above list are picked.
The default is in the order of the list - so mq://server1:7676/jms will always be
picked by default. If you want random behavior (which will hopefully even out the
load), set imqAddressListBehavior to RANDOM.
regards,
-i
http://www.sun.com/software/products/message_queue/index.xml

Solman_admin password changes results in errors during managed system setup

Hello all,
I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
Currently I have 6 messages at SAP, but no solution yet.
Situation:
Solman 4.0
SAP_BASIS     701     0003
SAP_ABA     701     0003
ST-PI     2008_1_700     0000
PI_BASIS     701     0003
SAP_BW     701     0003
CRMUIF     500     0001
SAP_AP     700     0014
BBPCRM     500     0013
CPRXRPM     400     0014
BI_CONT     704     0002
ST     400     0019
ST-A/PI     01L_CRM570     0000
ST-ICO     150_700     0016
ST-SER     701_2008_2     0002
So, it is uptodate.
The problem:
Changing the solman_admin password results in errors during connecting a managed system.
In the inital setup the solman_admin is created with a pasword.
After the basic setup I setup some managed systems.
In the meantime I had to change the password of solman_admin
I am logged in with solman_admin and do solman_setup to setup the managed system.
During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
This is the logging:
Step SSO Details
Found SID for SSO ACL entry : MSD
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
!! Exception : Password logon no longer possible - too many failed attempts
A failure occured while importing ABAP SSO ticket certificate in ABAP stack
!! Exception : java.lang.NullPointerException
Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
Anyone else has this problem?
gr
Sander

Just for clarification it's Solman 7.0 EHP1 correct?
Also you may want to unlock the following user:
localhost sys=70 client=300 user=SOLMAN_ADMIN
Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
Hope this helps, please let me know and we can go from there.

Error message: Error During Rendering / Encoding

Greetings,
I have used iDVD in the past without problems on my macbook pro. Now it seems there is no way to make it work! I get this error everytime: "Error During Rendering/Encoding" the error is in the menu/slideshows, but I see that it never gets past the menu item on the list of things it is working on. I have tried going to the older menus and no luck. It says that the burning process has been cancelled. Any ideas?????
Thanks!

Hooray! I got it... I used what you said and this other post (below) helped as well. Is there a way to remove the apple logo from the menu page?
Here is the other post that helped as well:
I was having the same problem yesterday and researched all the solutions in the Forum. I wasn't experiencing the problem with burning to a disc, because I was trying to burn a disc image, so the variable of "better" versus "best" disc wasn't a factor. I did three simple things that I read about, after I tried four times and received the "Multiplexor Error" thing. One, I deleted encoded assets (Advanced > Delete Encoded Assets). Two, I trashed the iDVD preference file (home > library > preferences > com.apple.iDVD.plist), but only after I closed the iDVD application. Three, and maybe this stupid little glitchy thing made a difference, I deleted from the title and scene headings all characters other than letters of the alphabet and numbers. I have a few "&"'s and "/"s in there and maybe a few other little lazy short-cut things. Sort of a Microsoft thing, but maybe that was the trick. So, this morning the Disc Image was created, I've burned several DVD's (Magnavox DVD-R), they work on my Sony Blu-Ray player and all is happyland today.

BR278E error during backup

HI all,
Our database backup was running ok for the passed 3 months after the SAP system was installed. Recently, I keep getting BR278E error during backup. Below are the error message:
BR0202I Saving init_ora
BR0203I to /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C cd /oracle/PRD/102_64/dbs && /usr/sap/PRD/SYS/
exe/run/brtools -f printarg initPRD.ora spfilePRD.ora | LANG=C cpio -ovB > /dev/
rmt/0mn':
initPRD.ora
spfilePRD.ora
^GEnd of medium on "output".
To continue, type device/file name when ready.
The SAP system is on Solaris/Oracle running ECC6.0. LTO-4 tape drive is used for the backup. Tape_size in initSID.sap is set to 720000M. Current database size is 128Gb.
What is the reason for the backup failure?
Rdgs,
Lim

Hi,
This is my initSID.sap
@(#) $Id: //bas/640_REL/src/ccm/rsbr/initSUN.sap#4 $ SAP
backup mode [all | all_data | full | incr | sap_dir | ora_dir
| <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
default: all
backup_mode = all
restore mode [all | all_data | full | incr | incr_only | incr_full
| <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
redirection with '=' is not supported here - use option '-m' instead
default: all
restore_mode = all
backup type [offline | offline_force | offline_standby | offline_split
| offline_mirror | offline_stop | online | online_cons | online_split
| online_mirror
default: offline
backup_type = online
backup device type
[tape | tape_auto | tape_box | pipe | pipe_auto | pipe_box | disk
| disk_copy | disk_standby | stage | stage_copy | stage_standby
| util_file | util_file_online | rman_util | rman_disk | rman_stage
| rman_prep]
default: tape
backup_dev_type = tape
backup root directory [<path_name> | (<path_name_list>)]
default: $SAPDATA_HOME/sapbackup
backup_root_dir = /oracle/PRD/sapbackup
stage root directory [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
stage_root_dir = /oracle/PRD/sapbackup
compression flag [yes | no | hardware | only]
default: no
compress = hardware
compress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<target_file_name> = <source_file_name>.Z
for compress command the -c option must be set
recommended setting for brbackup -k only run:
"compress -b 12 -c $ > $"
no default
compress_cmd = "compress -b 12 -c $ > $"
uncompress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<source_file_name> = <target_file_name>.Z
for uncompress command the -c option must be set
no default
uncompress_cmd = "uncompress -c $ > $"
directory for compression [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
compress_dir = /oracle/PRD/sapreorg
brarchive function [save | second_copy | double_save | save_delete
| second_copy_delete | double_save_delete | copy_save
| copy_delete_save | delete_saved | delete_copied]
default: save
archive_function = copy_delete_save
directory for archive log copies to disk
default: first value of the backup_root_dir parameter
archive_copy_dir = /oracle/PRD/sapbackup
directory for archive log copies to stage
default: first value of the stage_root_dir parameter
archive_stage_dir = /oracle/PRD/sapbackup
new sapdata home directory for disk_copy | disk_standby
no default
new_db_home = /oracle/C11
stage sapdata home directory for stage_copy | stage_standby
default: value of the new_db_home parameter
stage_db_home = /oracle/C11
original sapdata home directory for split mirror disk backup
no default
orig_db_home = /oracle/C11
remote host name
no default
remote_host = <host_name>
remote user name
default: current operating system user
remote_user = <user_name>
tape copy command [cpio | cpio_gnu | dd | dd_gnu | rman | rman_dd]
default: cpio
tape_copy_cmd = dd
disk copy command [copy | dd | dd_gnu | rman]
default: copy
disk_copy_cmd = copy
stage copy command [rcp | ftp]
default: rcp
stage_copy_cmd = rcp
flags for cpio output command
default: -ovB
cpio_flags = -ovB
flags for cpio input command
default: -iuvB
cpio_in_flags = -iuvB
flags for cpio command for copy of directories to disk
default: -pdcu
cpio_disk_flags = -pdcu
flags for dd output command
default: "obs=16k"
recommended setting:
Unix: "obs=nk bs=nk", example: "obs=64k bs=64k"
NT: "bs=nk", example: "bs=64k"
dd_flags = "obs=64k bs=64k"
flags for dd input command
default: "ibs=16k"
recommended setting:
Unix: "ibs=nk bs=nk", example: "ibs=64k bs=64k"
NT: "bs=nk", example: "bs=64k"
dd_in_flags = "ibs=64k bs=64k"
copy_in_cmd = "dd ibs=64k obs=8k if=$"
rewind command
rewind = "mt -f $ rewind"
rewind and set offline command
rewind_offline = "mt -f $ offline"
tape positioning command
tape_pos_cmd = "mt -f $ fsf $"
recommended values for tape devices with hardware compression:
tape_size = 720000M
address of backup device without rewind
tape_address = /dev/rmt/0mn
address of backup device with rewind
tape_address_rew = /dev/rmt/0m
volumes for brarchive
volume_archive = (PRDA09, PRDA10)
volumes for brbackup
volume_backup = (PRDB09, PRDB10)
expiration period for backup volumes in days
expir_period = 5
recommended usages of backup volumes
tape_use_count = 260
Edited by: limws1 on Aug 27, 2011 4:44 AM

Unexpected error during HTTP request to voucher server The operation timed out

I read books from my library through a system called READS. I have successfully used DE 1.0 without any problems, however, when I tried to use it recently it required me to upgrade to 1.5. Well I did so and now the books won't authorize. Here is the error message I am getting:
Adobe DRM Error System: 5 State: 4 Class: 600 Code: 106 Message: Error on request or response from server. Please check your network connection and try again. Scroll below or view error.log for more details.
Adobe DRM client Error: 706 Unexpected error during HTTP request to voucher server The operation timed out
Requested URL: http://207.54.136.76/fulfill/ebx.etd?action=lend&orderid=939605378082105&bookid=ContentRe serveID:B91CC494-23AF-4C6A-9B0C-7DA050C05722-50
Requested URL: http://207.54.136.76/fulfill/ebx.etd ?action=lend &orderid=939605378082105 &bookid=ContentReserveID:B91CC494-23AF-4C6A-9B0C-7DA050C05722-50
--- end ---
I have tried this multiple times with more than one book. Again, they worked just fine before I did the upgrade. I am running Vista SP1.

Never mind, they obviously post the message on the ticket, but it doesn't send an e-mail. I will try what they indicated. Here is their response...
Thank you for contacting Adobe Technical Support.
I understand that you are getting "Adobe DRM Error" in Digital Editions.
We have documented the steps to resolve this error message. Please do
refer to this TechNote:
Error: "Adobe DRM Error" when you activate Digital Editions or access an
eBook
http://www.adobe.com/go/kb402747

Tp error during EHPI checks NTCHK phase

Hi,
We are running the EHPI and recieve the following error during the Checks phase:
Severe error(s) occured in phase PREP_GENCHECKS/NTACT_CHK!
Last error code set: Process 'tp' exited with 12, see '/uexports/DV1/EHPI/abap/log/TP.ECO' for details
Error during "tp ntaction"-call - check TP.ECO
TP.ECO=
SAPehpi> Starting subprocess 16165 at 20101007100438
ENV: DIR_LIBRARY=/uexports/DV1/EHPI/abap/exenew
ENV: JAVA_HOME=/opt/java1.4
ENV: LD_LIBRARY_PATH=/uexports/DV1/EHPI/abap/exenew:/uexports/DV1/EHPI/jvm/jre/lib/ia64/server:/uexports/DV1/EHPI/jvm/jre/
lib/ia64:/uexports/DV1/EHPI/jvm/jre/../lib/ia64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_BASE=/oracle
ENV: ORACLE_HOME=/oracle/DV1/102_64
ENV: ORACLE_SID=DV1
ENV: PATH=/uexports/DV1/EHPI/abap/exenew:/opt/java1.4/bin:/oracle/DV1/102_64/bin:.:/home/dv1adm:/usr/sap/DV1/SYS/exe/run:/
usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/hparray/bin:/opt/nettladm/bin:/opt/fcms/bin:/
usr/contrib/kwdb/bin:/usr/bin/X11:/opt/graphics/common/bin:/opt/upgrade/bin:/opt/ipf/bin:/opt/resmon/bin:/opt/perf/bin:/op
t/wbem/bin:/opt/wbem/sbin:/opt/prm/bin:/opt/sec_mgmt/bastille/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/gnome/bin:/opt/ignite/
bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/hpsmh/bin:/opt/wlm/bin:/opt/hpnpl//bin:/usr/contrib/bin/X11:/opt/sfm/bin:/opt/
mozilla:/opt/perl_32/bin:/opt/perl_64/bin:/opt/swa/bin:/oa/cdirect/ndm/bin:.
ENV: SAPSYSTEMNAME=DV1
ENV: auth_shadow_upgrade=0
ENV: dbms_type=ORA
ENV: dbs_ora_schema=SAPR3
ENV: dbs_ora_tnsname=DV1
EXECUTING /uexports/DV1/EHPI/abap/exenew/tp (/uexports/DV1/EHPI/abap/exenew/tp) ntaction ntop=chkant DV1 pf=/uexports/DV1/
EHPI/abap/bin/DEFAULT.TPP srctt=DDNTT srctf=DDNTF dsttt=DDNTT dsttf=DDNTF intdel=YES -Dntact_timecmp=no protyear=40
initial value of NLS_LANG: 'AMERICAN_AMERICA.UTF8'
This is /uexports/DV1/EHPI/abap/exenew/tp version 372.04.88 (release 701, unicode enabled)
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter MAX_SEMAPHORE_WAIT in parameter file (line 8).
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter MAX_SEMAPHORE_WAIT in parameter file (line 8).
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
tp finished with return code: 12
meaning:
A tool used by tp aborted
Process with ID 16165 terminated with status 12
NTCHK.LOG=
1 ETQ201 Entering upgrade-phase "NTACT_CHK" ("20101007100438")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399   default TPPARAM: DEFAULT.TPP
1 ETQ200 Executing actual phase 'PREP_GENCHECKS/NTACT_CHK'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'CHKANT'
2 ETQ399 Arg[1] = 'DDNTT'
2 ETQ399 Arg[2] = 'DDNTF'
2 ETQ399 Arg[3] = 'DDNTT'
2 ETQ399 Arg[4] = 'DDNTF'
2 ETQ399 Arg[5] = ''
2 ETQ399 Arg[6] = 'NOBUFRESET'
2 ETQ399 Arg[7] = ''
2 ETQ399 Arg[8] = ''
2 ETQ399 Arg[9] = ''
2 ETQ399 Arg[10] = 'NTCHK.ELG'
4 ETQ380 computing toolpath for request "TP_NTACTION_SHD"
4 ETQ381 request "TP_NTACTION_SHD" means "tp ntact for shadow tables"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHDNEW"
4 ETQ383 translates to path "exenew"
4 ETQ383 translates to path "exe"
2 ETQ399 Checking of nametabs ...
4 ETQ399 2010/10/07 10:04:38: put_execute: (tp) forkpid:16165
It doesn't even get to the point of creating NTCHK.ELG
-rw-rr   1 dv1adm     sapsys      287923 Oct 7 10:19 SAPehpichk.log
-rw-rr   1 dv1adm     sapsys       13144 Oct 7 10:19 TROUBLE_SAVELOGS.LOG
-rw-rr   1 dv1adm     sapsys      151957 Oct 7 10:19 SAPehpi_troubleticket_logs.sar
-rw-rw-r--   1 dv1adm     sapsys       10039 Oct 7 10:19 SLOG700
-rw-rw-r--   1 dv1adm     sapsys       80609 Oct 7 10:19 ALOG700
-rw-rr   1 dv1adm     sapsys        9238 Oct 7 10:19 TP.ECO
-rw-rr   1 dv1adm     sapsys        1729 Oct 7 10:19 SAPehpi_troubleticket.log
-rw-rw-r--   1 dv1adm     sapsys     112988412 Oct 7 10:19 PN401007.DV1
-rw-rr   1 dv1adm     sapsys        1292 Oct 7 10:05 NTCHK.LOG
-rw-rr   1 dv1adm     sapsys       57379 Oct 7 10:05 SAPehpiConsole.log
-rw-rw-r--   1 dv1adm     sapsys      148736 Oct 7 10:04 ULOG10_4
-rw-rr   1 dv1adm     sapsys       10692 Oct 7 10:04 SAPehpi.ECO
-rw-rr   1 dv1adm     sapsys       10581 Oct 7 10:04 NTCHK.SAV
takderp1:dv1adm 530> ll NT*
-rw-rr   1 dv1adm     sapsys        1292 Oct 7 10:05 NTCHK.LOG
-rw-rr   1 dv1adm     sapsys       10581 Oct 7 10:04 NTCHK.SAV
SAPehpi_troubleticket.log=
This trouble ticket was created by SAPehpi on 20101007101947
SAPehpi broke during phase NTACT_CHK in module PREP_GENCHECKS / General checks
Error Message: Process 'tp' exited with 12, see '/uexports/DV1/EHPI/abap/log/TP.ECO' for details
Error during "tp ntaction"-call - check TP.ECO
Summary of SAPehpi:
SAPehpi Release:        7.10/1
SAPehpi Version:        SAPehpi version 7.10/1
Start Release:          700
Target Release:         701
Summary of host system details:
SID:                    DV1
Host:                   takderp1
MS Host:                takderp1
GW Host:                takderp1
Start Path:             /usr/sap/DV1/SYS/exe/run
Kernel Path:            /usr/sap/DV1/SYS/exe/run
Summary of operating system details:
OS Type:                HP-UX IA64
OS Version:             11.23
Summary of database details:
Database Type:          ora
Database Version:       10.2.0.2.0
Summary of RFC details:
Host:                   takderp1
GW Host:                takderp1
Client:                 000
Destination:            DV1
Language:
System No.:             00
Any help would be appreciated.
Thanks,
Jim

Hi Eric,
I have the log posted above but here is an excert from the TP.ECO log.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
tp finished with return code: 12
meaning:
A tool used by tp aborted
Process with ID 22858 terminated with status 12
Regards,
JIm

Errors During "re-role" of IIS7 0x80070643

Is re-role a word.
Having problem accessing VMRC from my vista workstation to my 2008 X64 Server with Virtual Server 2005 R2 installed
Then could not access Virtual Server at all via web interface.
Fiddled with Authentication, and it got worse.
Panic not I thought, remove virtual server, un-role IIS, and start again, except it will not. I am unable to re-role IIS at all
Very odd I thought.
This has been raised before, however that person opted for a reinstall before it got anywhere. I really dont want to do that.
Jim White
=============
Installation failed.
Roles:
Web Server (IIS)
   Error: Attempt to install IIS Management Console failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Static Content Compression failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install HTTP Logging failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Static Content failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Directory Browsing failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install HTTP Errors failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Request Monitor failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Request Filtering failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Default Document failed with error code 0x80070643. Fatal error during installation
   The following role services were not installed:
   Web Server
      Common HTTP Features
         Static Content
         Default Document
         Directory Browsing
         HTTP Errors
      Health and Diagnostics
         HTTP Logging
         Request Monitor
      Security
         Request Filtering
      Performance
         Static Content Compression
   Management Tools
      IIS Management Console
=============

Hi all. I'm having the exact same problem as Jimbo1199:
Installation failed.
Roles:
Web Server (IIS)
   Error: Attempt to install IIS Management Console failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install HTTP Errors failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Static Content failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Directory Browsing failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Request Filtering failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Request Monitor failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install HTTP Logging failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Default Document failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Static Content Compression failed with error code 0x80070643. Fatal error during installation
   The following role services were not installed:
   Web Server
      Common HTTP Features
         Static Content
         Default Document
         Directory Browsing
         HTTP Errors
      Health and Diagnostics
         HTTP Logging
         Request Monitor
      Security
         Request Filtering
      Performance
         Static Content Compression
   Management Tools
      IIS Management Console
Features:
Windows Process Activation Service
   Error: Attempt to install Configuration APIs failed with error code 0x80070643. Fatal error during installation
   Error: Attempt to install Process Model failed with error code 0x80070643. Fatal error during installation
   The following features were not installed:
   Process Model
   Configuration APIs
I have tried removing all server roles and features, including Windows Internal Database which was installed. I'm at a loss as to why this continues to fail on the install. I am using the Server Manager to install the role/feature. I can email CBS/event logs/servermanager logs for anyone willing to assist me in this.
The box I have is Win2k8 server standard, SP1 64bit with 4Gb ram. It's joined to an AD domain. I emailed Morgan at the above email address a couple of days ago however no response as of yet. I'd really like to fix this without having to rebuild the box.
Cheers
Brenton

ERRORS during NAMETAB CHECK in checks phase of EHP Inst.

Hi SDNers,
I'm implementing SAP Enhancement Package 4 for ECC6 system (ABAP).I started the application and it gets through the checks phase ok, except errors during the GENCHECKS/NTACT_CHK TEXT .
I logged on se11 but I could not able to see Runtime Object .
See below error message:
%BEGIN PREP_GENCHECKS/NTACT_CHK TEXT
ERROR> *** ERRORS during NAMETAB CHECK found ***
        Analyze the logfile NTCHK.ELG to determine
        the nametab, that caused the error.
        Call transaction se11 for the corresponding
        DDIC object. Choose menu Utilities -> Runtime Object -> Check
        If you repeat the phase and there is still an error,
        see also note Nr. 179334 for additional information
+++++++++++++ Content of NTCHK.ELG +++++++
1 ETQ201 Entering upgrade-phase "NTACT_CHK" ("20100309081807")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=<null>
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399   default TPPARAM: DEFAULT.TPP
1 ETQ200 Executing actual phase 'PREP_GENCHECKS/NTACT_CHK'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'CHKANT'
2 ETQ399 Arg[1] = 'DDNTT'
2 ETQ399 Arg[2] = 'DDNTF'
2 ETQ399 Arg[3] = 'DDNTT'
2 ETQ399 Arg[4] = 'DDNTF'
2 ETQ399 Arg[5] = ''
2 ETQ399 Arg[6] = 'NOBUFRESET'
2 ETQ399 Arg[7] = ''
2 ETQ399 Arg[8] = ''
2 ETQ399 Arg[9] = ''
2 ETQ399 Arg[10] = 'NTCHK.ELG'
4 ETQ380 computing toolpath for request "TP_NTACTION_SHD"
4 ETQ381 request "TP_NTACTION_SHD" means "tp ntact for shadow tables"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHDNEW"
4 ETQ383 translates to path "exenew"
4 ETQ383 translates to path "exe"
2 ETQ399 Checking of nametabs ...
4 ETQ399 2010/03/09 08:18:07: put_execute: (tp) forkpid:1175614
4 ETQ010 Date & Time: 20100309090358
Has anyone encountered anything similar? Any ideas?
Thanks in advance,
Faris AL-Saweed

hi Niraij,
below more details of SAPehpi_troubleticket.log
This trouble ticket was created by SAPehpi on 20100310093046
SAPehpi broke during phase NTACT_CHK in module PREP_GENCHECKS / General checks
Error Message: No lines found in logfile matching 'PN......\.EQA'
Summary of SAPehpi:
SAPehpi Release:     7.10/1
SAPehpi Version:     SAPehpi version 7.10/1
Start Release:          700
Target Release:          701
Summary of host system details:
SID:               EQA
Host:               wmdsapeqa
MS Host:          wmdsapeqa
GW Host:          wmdsapeqa
Start Path:          /usr/sap/EQA/DVEBMGS00/exe
Kernel Path:          /usr/sap/EQA/DVEBMGS00/exe
Summary of operating system details:
OS Type:          AIX
OS Version:          5.2.0
Summary of database details:
Database Type:          ora
Database Version:     10.2.0.4.0
Summary of RFC details:
Host:               wmdsapeqa
GW Host:          wmdsapeqa
Client:               000
Destination:          EQA
Language:
System No.:          00
regards,
Faris
Edited by: Faris Solaiman Saweed on Mar 10, 2010 8:07 AM

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Compression Factor=1 error during Ticket actualisation

Similar Messages

Maybe you are looking for